SRM-SUS Single server,Single client

Hi All
We have installed SRM 5.0. The SUS component is integrated with it.
However we are not sure whether SRM and SUS components are communicating to each other ? Could any one confirm what all settings need to be done to activate SUS.
Thanks
NNK

Any suggestions please
NNK

Similar Messages

Do I need DFSR in a single server environment?

I have a 2012 Host, running a single 2012 Guest. Guest is running as a DC with AD, DNS, DHCP, and File Services. DFSR is running, and it gives a warning every time my back runs (Backup is running on Host). Warning is The DFS Replication
service stopped replication on volume F:......and long message about Database, yada yada yada.
Do I need to run DFSR? Again, single server, no file replication to different offices. I'm not finding a clear answer to that question.
Second, Server Manager should, according to TechNet, have under the Tools option the ability to turn off DFSR. I cannot find that option. So, IF I can turn it off, can I simply disable the DFS Namespace and DFS Replication services?
I would prefer eliminating rather than ignoring warnings.
Thanks

Sorry, one more time. I have a single server environment, there is NO upstream domain controller, no replication between DC's. There is ONE DC. So, this is digressing into two questions. One, why do I need to run DFSR (again, lots
of articles talking about how to turn it off, and not as a discussion of temporary turn off https://msdn.microsoft.com/en-us/library/cc753144.aspx) in a single server, single domain, non-replicating environment.
Second, how do I address the warning I receive during my backup? It appears to be caused by a replication error to downstream servers, since there is no downstream server, I should be able to resolve it by turning DFSR off. I would like some
documentation discussing the issue of turning it off in a non-DFS environment.
The DFS Replication service stopped replication on volume F:. This occurs when a DFSR JET database is not
shut down cleanly and Auto Recovery is disabled. To resolve this issue, back up the files in the affected replicated folders, and then use the ResumeReplication WMI method to resume replication.
Additional Information:
Volume: F:
GUID: 65E46942-B9D6-11E3-9400-00155D325402
Recovery Steps
1. Back up the files in all replicated folders on the volume. Failure to do so may result in data loss due
to unexpected conflict resolution during the recovery of the replicated folders.
2. To resume the replication for this volume, use the WMI method ResumeReplication of the DfsrVolumeConfig
class. For example, from an elevated command prompt, type the following command:
wmic /namespace:\\root\microsoftdfs path dfsrVolumeConfig where volumeGuid="65E46942-B9D6-11E3-9400-00155D325402"
call ResumeReplication
For more information, see http://support.microsoft.com/kb/2663685.
Jeff Ferris

Intermittend DNS resolution, timeserver, group policy updates errors in client logs in Win 2012 R2 single server environement

We recently switched hardware and server software Win SBS 2008 to 2012R2 for a small network roughly 40 clients (Win7 Pro / Win 8.1 Pro) about 16 running concurrently at a given time and one network printer with the printer queue residing on the DC as well.
I read that a single server environment might not be ideal in particular no fail-over but that is an accepted risk in this particular network here.
Errors:
Error 1043: Timeout during name resolution request
Error 1129: Group policy updates could not be processed due to DC not available
Error 5719: Could not establish secure connection to DC, DC not available
Occasionally but disappears after a while
Error 134: As a result of a DNS resolution timeout could not reach time server
Symptoms
On Win 7 Clients
Network shares added through Group Policy will not show sometimes
Network shares disconnect (red X) and when accessed return access authorization error after one or two clicks on the share finally grant access again
When the issue with accessing network shares occurs, it usually also affects Internet access meaning a 'server not responding' error appears in the browser windows when trying to open just any web page
nslookup during the incident returns cannot resolve error
ipconfig on client shows correct default router (VDSL Router) and DHCP / DNS Domain Controller
Also, the Win system log shows the above errors during these incidents, however, the nuimber of incidents vary from 20-30
On Win 8.1 Clients
Same as above with the slight variation for network shares apparently due to Server 2012 and Win 8.1 clients managing drive shares differently. However, network share refresh does not work with this clients. In most cases only a gpupdate /force returns
drive shares but usually only for the active session. After logoff / logon the shares are gone again.
The issue does appear to be load related since it occurs even if there are only one or two workstations active.
Server Configuration
Dell R320 PowerEdge 16GB / 4TB 7200RPM RAID10 / GBitEthernet
Zyxel 1910-48 Port Switch
VDSL 50Mbps Down / 20Mbps Up
Since the DC is the only local DNS and there are no plans to add another one or move DNS to another server, the DNS server is configured with this own address as preferred DNS with three DNS forwarders 1) VDSL Router 2) ISP DNS1 3) ISP DNS2
Currently only one Network card is active for problem determination reasons.
There appears to be no consensus concerning IPV6 enabled or disabled, I tried both with no apparent effect
I have set all network cards server and client to Full Duplex and the same speed, also disabled Offload functions within the adapter settings. Some but no consistent improvements.
Best Practice Analyzer Results
DNS server scavening not enabled
Root hint server XYZ must respond to NS queries for the root zone
More than one forwarding server should be configured (although 3 are configured)
NIC1 should be configured to use both a preferred and alternate DNS (there is only one DNS in this network)
I have found some instructions to apply changes to the clients through a host file but I would rather like to understand whether this DNS response time issue can be resolved on the server for example timing setting perhaps. Currently the DNS forwarders are
set to 3 second.
Since a few people have reported issues with DNS but most are working with multi DNS, DC environment I could not really apply any suggestions made there. perhaps there is anyone like me who is running a single server who has overcome or experience the same
issues. Any help would be appreciated

Hello Milos thx for your reply.. my comments below
1. What does it "switched"? You may mean migration or new installation. We do not know...
>> Switched is probably the incorrect term, replaced would be the appropriate wording. Before, there was a HP Proliant Server with SBS 2008 with distinct domain and now there is a Dell Server with MS 2012 R2 with a distinct domain. Client were
removed from one (SBS) domain and added to the new Server 2012 domain. Other components did not change for example same Network Switch or VDSL Router, Workstations and Printer
2. Two DCs are better alternative. Or backup very frequently. There are two groups of administrators. Those who have lost DC and those who will experience this disaster in near future.
>> Correct, and I am aware of that
3. NIC settings in W 7 and W 8.1, namely DNS points to DC (...and NOTHING else. No public IP or that of router DNS.))
>> Correct, this is how it's currently implemented. Clients point to DC for DHCP and DNS and Default Router, no public IP or DNS. The only references to ISP DNS exist on the VDSL Router itself as provided through ISP when establishing VDSL
Link and the list of Forwarders in the DNS Server configuration. However, I have just recently added the ISPs DNS as forwarders for test purposes and will probably learn tomorrow morning whether this had any effect for better or worse.
4. Do nslookup to RR on clients. RR branch is saying client basic info on LDAP parameters of AD.
>> Will post as soon as available
5. I do not use forwarders and the system works
>> Ok, does this mean it works for you in a similar or the same infrastructure setup or are you saying it is not required at all and I can remove any forwarder in a scenario like mine? If not required can you explain a bit more why it is not
required apart from that it does work for you that way?
6. DHCP should sit on DC (DHCP on router is disabled)
>> Correct, no other device is configured to provide DHCP service other than DC and DHCP is currently running on DC
7. NIC settings in DC points to itself (loopback address 127.0.0.1)
>> Are you sure this is still correct and does apply to Server 2012? I am reading articles stating that it should be the servers own IP but local loop or should this be added as alternate DNS in addition to the servers own IP?
8. Use IPCONFIG /FLUSHDNS whenever you change DNS settings.
>> OK, that was not done every time I changed some settings but I can do that next week. Reboot alone would not suffice, correct?
9. Test your system with dcdiag.
>> See result below
10. Share your findings.
Regards
Milos
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
Home Server = GSERVER2
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\GSERVER2
      Starting test: Connectivity
         ......................... GSERVER2 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\GSERVER2
      Starting test: Advertising
         ......................... GSERVER2 passed test Advertising
      Starting test: FrsEvent
         ......................... GSERVER2 passed test FrsEvent
      Starting test: DFSREvent
         ......................... GSERVER2 passed test DFSREvent
      Starting test: SysVolCheck
         ......................... GSERVER2 passed test SysVolCheck
      Starting test: KccEvent
         ......................... GSERVER2 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... GSERVER2 passed test
         KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... GSERVER2 passed test MachineAccount
      Starting test: NCSecDesc
         ......................... GSERVER2 passed test NCSecDesc
      Starting test: NetLogons
         ......................... GSERVER2 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... GSERVER2 passed test
         ObjectsReplicated
      Starting test: Replications
         ......................... GSERVER2 passed test Replications
      Starting test: RidManager
         ......................... GSERVER2 passed test RidManager
      Starting test: Services
         ......................... GSERVER2 passed test Services
      Starting test: SystemLog
         ......................... GSERVER2 passed test SystemLog
      Starting test: VerifyReferences
         ......................... GSERVER2 passed test VerifyReferences
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : GS2
      Starting test: CheckSDRefDom
         ......................... GS2 passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... GS2 passed test CrossRefValidation
   Running enterprise tests on : GS2.intra
      Starting test: LocatorCheck
         ......................... GS2.intra passed test LocatorCheck
      Starting test: Intersite
         ......................... GS2.intra passed test Intersite
Server: gserver2.g2.intra
Address: 192.168.240.6
*** gserver2.g2.intra can't find g2: Non-existent domain
> gserver2
Server: gserver2.g2.intra
Address: 192.168.240.6
g2.intra
        primary name server = gserver2.g2.intra
        responsible mail addr = hostmaster.g2.intra
        serial = 443
        refresh = 900 (15 mins)
        retry   = 600 (10 mins)
        expire = 86400 (1 day)
        default TTL = 3600 (1 hour)
> wikipedia.org
Server: gserver2.g2.intra
Address: 192.168.240.6
Non-authoritative answer:
wikipedia.org   MX preference = 10, mail exchanger = polonium.wikimedia.org
wikipedia.org   MX preference = 50, mail exchanger = lead.wikimedia.org
polonium.wikimedia.org internet address = 208.80.154.90
polonium.wikimedia.org AAAA IPv6 address = 2620:0:861:3:208:80:154:90
lead.wikimedia.org      internet address = 208.80.154.89
lead.wikimedia.org      AAAA IPv6 address = 2620:0:861:3:208:80:154:89
Final benchmark results, sorted by nameserver performance:
(average cached name retrieval speed, fastest to slowest)
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name   | 0,001 | 0,002 | 0,003 | 0,001 | 100,0 |
+ Uncached Name | 0,027 | 0,076 | 0,298 | 0,069 | 100,0 |
+ DotCom Lookup | 0,041 | 0,048 | 0,079 | 0,009 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
             gserver2.g2.intra
                Local Network Nameserver
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,022 | 0,023 | 0,025 | 0,000 | 100,0 |
- Uncached Name | 0,025 | 0,071 | 0,274 | 0,065 | 100,0 |
- DotCom Lookup | 0,039 | 0,040 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
                     cns8.bluewin.ch
           BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,022 | 0,023 | 0,026 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,072 | 0,299 | 0,066 | 100,0 |
- DotCom Lookup | 0,039 | 0,042 | 0,049 | 0,003 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
                     cns7.bluewin.ch
           BLUEWIN-AS Swisscom (Schweiz) AG,CH
    8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,033 | 0,040 | 0,079 | 0,011 | 100,0 |
- Uncached Name | 0,042 | 0,113 | 0,482 | 0,097 | 100,0 |
- DotCom Lookup | 0,049 | 0,079 | 0,192 | 0,039 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
             google-public-dns-a.google.com
                 GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:33:12 to 14:33:29, for 00:17,648
15: 40
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name   | 0,001 | 0,002 | 0,004 | 0,000 | 100,0 |
+ Uncached Name | 0,025 | 0,074 | 0,266 | 0,063 | 100,0 |
+ DotCom Lookup | 0,042 | 0,048 | 0,075 | 0,007 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
             gserver2.g2.intra
                Local Network Nameserver
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,024 | 0,073 | 0,289 | 0,067 | 100,0 |
- DotCom Lookup | 0,039 | 0,041 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
                     cns7.bluewin.ch
           BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,073 | 0,286 | 0,065 | 100,0 |
- DotCom Lookup | 0,041 | 0,066 | 0,180 | 0,037 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
                     cns8.bluewin.ch
           BLUEWIN-AS Swisscom (Schweiz) AG,CH
    8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name   | 0,033 | 0,038 | 0,077 | 0,009 | 100,0 |
- Uncached Name | 0,042 | 0,105 | 0,398 | 0,091 | 100,0 |
- DotCom Lookup | 0,049 | 0,066 | 0,141 | 0,025 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
             google-public-dns-a.google.com
                 GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:39:59 to 14:40:12, for 00:13,363

Steps to Install oracle 11g client 32 Bit,64 Bit in a single server

Hi,
I have a requirement to Install Both "Oracle Client 11.2.0.2 Win32" and "Oracle Client 11.2.0.2 Win64" on a single server.
Please provide the step by step instruction for the above requirement.
Environment
Windows Server 2008 R2 64Bit.
Thanks
Sambit

Just use separate base directories e.g.
c:\32bit\oracle and
c:\64bit\oracle
Install the 32-bit client first, then the 64-bit client. The order should not matter.
WINDOWS: Install Oracle Client 11.2 32-bit and 64-bit on Same System Overwrites Programs Menu Entry [ID 1243374.1]
How To Install Both 32-bit and 64-bit ODP, OLEDB, And ODBC Oracle Software on 64-bit Windows [ID 795602.1]
HTH
Srini

Single server solution for RDS / TS / RDP using Windows Server 2012 R2

Planning on setting up a small single server and need this functionality:
* 3 local users runnnig Windows 7 Home Premium needs to access files on the server
* The same 3 users should also be able to connect from home (PC, Mac, iPhone) and run an application on the server. (Session-Based Remote Desktop).
We want to use Windows Server 2012, and found out that Essentials does not support RDP, so that leaves Foundation and Standard versions.
However, I also found out that in WS 2012 the RDP can not be on the same server as the Domain Controller, and we therefor needs to run 2 server instances on our hardware. I think this starts to look way to complicated for what we want to do, but found out
that WS 2012 R2 allows a single server to run RDP (See TechNet article 2833839).
So we will go for Windows Server 2012 R2, either Foundation or Standard to set up our RDP.
So now the question: Will that solution work with our local machines running Windows 7 Home Premium, as they cannot connect to a domain? Can we set up some kind of simple file share or Workgroup to acces files locally while still keeping the RDP
functionality on the server?
And, will WS 2012 Foundation R2 do this as well as WS 2012 Standard R2?
(I have been asking several locat MS representatives to find a solution to our needs, but no one seems to know how this works....of cause we could just get 2 WS 2012 Standard server instances, run one as DC and on as RDCB and upgrade all our clients to Win
7 Pro, but we would like a solution with minimal investment in time and money)
Rgds
Petter

Hi Ryan,
and thanks for the answer! I do not know how to do "multiple quote" in this forum so I do it this way:
"have you considered virtualisation, as you can run multiple virtual machines under one licence. I think this would be the cheapest and most efficient use of your money. Upgrading your clients to Windows 7 pro would allow you to have domain control
Single Sign On SSO. "
This is the "official" solution I think: Upgrade all clients to Win 7 Pro and run two instances of Win Server 2012 Standard on the server.
However, I was hoping to get away with something a bit more Quick & Dirty.....;-) We do not have big security issues and will have a good backup system, and I think for 3 users only, it will be more work trying to centralise administration like updating,
backups etc, than to just go to each machine and do what is needed.
We are good with computers/Windows but have no Server experience. A server guy will help us get started, but I dont want him around after that, so it must be a very simple solution.
Also, installing 2 instances of WS 2012 and upgrading all 3 clients to Win Pro, and then installing all software and settings on the clients into the new domain user accounts on these clients is quite a lot of work. So I was hoping to keep only existing local
users on the client machines and only have some kind of file share thing going on with the server disks that we need to access. So perhaps use a Workgroup instead of a domain, if that works with the RDS setup?
"Option 1
2 virtual machines 1x DC and 1x RDS server."
So, if we set up RDS this way (so we can log in remote and run our application session-based on the server), can we keep the local clients running Windows Home Premium using our current local user logins (ie no domain user accounts created on the client machines,
as this is impossible in Home versions) and still access the server disks somehow, or is it impossible?
Another question is if it is stupid/a really bad solution...but I still want to know if it is possible....;-)
"Option 2
2 virtual machines 1x DC and 1x RDS server.
You can configure your RDS solution as a domain joined platform and will still be able to access resources from the local device as you can map local drives to the session host. http://www.serverintellect.com/support/techfaq/drive-rdp/
Your users would have two sets of credentials, one for the local client and one for the domain."
I do not want to access files over VPN or RDP, we only want to run an application on the server from remote (Session-Based Remote Desktop). However when we use the local clients we want to access files on the server, and then we access huge image and film files
on fast RAID drives, so local network speed must be top speed. Also if possible we would like to not upgrade to Win Pro, and then joining a domain is not possible.
"Option 3
1x Server
The second option would be to manually deploy the session host role and licencing role to a work group server. This would limit access to RDP only and you would loose web access functionality."
I think this is what I was hoping for. It seems that the new R2 release of WS 2012 allows you to rund RDP and Domain Controller roles on the SAME instance of the server. That sounds nice, it limits what we need to keep track on and minimises the load on the
server that needs to act as a very fast file server locally.
However, can we do this and still keep file acces with only Windows Home (no domain) in the local clients (same question as above under "Option 1")?
Rgds
Petter

Exchange Server 2013 SP1 - Optimize for Single Server Use

Hello,
i've set up Exchange 2013 SP1 with at last CU6 - get exchangeserver says:
AdminDisplayVersion             : Version 15.0 (Build 995.29)
ExchangeVersion                 : 0.1 (8.0.535.0)    - - - funny number ;-) (is this an early version???)
Yes, the annoying 16028 in the application log are running every five minutes, but thats not the main question.
Which services are needed in a SINGLE-SERVER Environment, without DAG and unified messaging?
Can the Self-Checking, Health- and Self-Probing be put down?
These services are started automatic:
   Microsoft Exchange Active Directory Topology
   Microsoft Exchange Anti-spam Update
   Microsoft Exchange DAG Management
   Microsoft Exchange Diagnostics
   Microsoft Exchange EdgeSync
   Microsoft Exchange Frontend Transport
   Microsoft Exchange Health Manager
   Microsoft Exchange Mailbox Assistants
   Microsoft Exchange Mailbox Replication
   Microsoft Exchange Mailbox Transport Delivery
   Microsoft Exchange Mailbox Transport Submission
   Microsoft Exchange Migration Workflow
   Microsoft Exchange Replication
   Microsoft Exchange RPC Client Access
   Microsoft Exchange Search
   Microsoft Exchange Search Host Controller
   Microsoft Exchange Service Host
   Microsoft Exchange Throttling
   Microsoft Exchange Transport
   Microsoft Exchange Transport Log Search
   Microsoft Exchange Unified Messaging
   Microsoft Exchange Unified Messaging Call Router
   Microsoft Exchange-Informationsspeicher
   Microsoft Filtering Management Service
   Microsoft Online Services Sign-in Assistant
And with C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Queue\mail.que about 512 MBytes size (which may may be a designed default size)...
Have set up about 6 users mailboxes, 3 public folder in a mailbox for public folders. Only for testing purposes sent some (small) mails, no external mails received (only testing receive with 'popcon' for mail delivery to the internal boxes).
The server (2012 R2) is running only in the internal network (yes, with internet connection for updates).
No virus scanners, not third party receive or send connectors, only the 5 default (3 Frontend, 2 Hub) receive Connectors and one Send Connector to our mail provider set up and no user activity (only sometimes from me for testing).
It seems like it's doing only with itself, logging file sizes of above 11 GB (in 4 weeks), with huge amounts of probing, health checking, internal testing, internal updating etc.
Can this logging be set up to a lower level, can services be deactivated (for single server configuration),
the logging volume should be in a useful relation to the mail use of the server, a message for every self test, internal health check etc. in the log-files normally isn't useful, only when problems occur there is a need...
Thanks in advance
Andreas

Between Exchange protocol-based log files, PerfMon .blg files used by Managed Availability, IIS logs, etc., the total footprint can add up quickly and these logs are not purged automatically. You can take a look at this site below and use the powershell
script to clean it up.
http://www.c7solutions.com/2013/04/removing-old-exchange-2013-log-files-html

Error in New Models Creation - Loadbalancing /Single Server locally

Is there any possibility of below error when Creating New Models with Single Server and but NOT Working with Load balancing Option.
The same code worked when connecting to Single Server locally but doesn't work when New models were created by selection of loadbalancing Option on Remote Server..during development on source from DTR Server(SLD)..
I get below error when New Model created with loadbalancing option
Error - com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Error connecting using JCO.Client: null
Edited by: Raghu v on Jan 26, 2008 1:27 PM

Hi,
In EAS, I am getting some for Planning Outline(Essbase outline is working fine), While starting the Planning service through start menu, it throwing error as
Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL DAY TO SECOND got NUMBER
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source)
Error encountered with Database connection, recreating connections.
Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL DAY TO SECOND got NUMBER
Thanks,
CP

How-To Create OVM 2.2.2 Single Pool with Non HA, Single Server

How to create OVM2.2.2 Server Pool with a Single, Non-HA configuration.
- Install OVM2.2.2 on target Server: [ovs222a, ip=192.168.0.207]
(Default install creates ocfs2 file system on /dev/sda3 on my machine, YMMV).
- Install OVMM2.2.0 or later on another server or VM
- Remove existing OCFS2 filesystem and repository from [ovs222a] server
- logon to [ovs222a] as root
# cd /opt/ovs-agent-latest/utils
# ./repos.py -l (shows uuid)
# ./repos.py -d [uuid]
- Recreate the ocfs2 file system
# mkfs.ocfs2 -N 8 -T datafiles /dev/sda3
- Create a new repository on the ocfs2 file system and make it root
# ./repos.py -n /dev/sda3
# ./repos.py -r /dev/sda3
# ./repos.py -l (should show new repository uuid with [R] designation)
- Edit cluster.conf, ensure only 1 node with ip addr: 192.168.0.207
# vi /etc/ocfs2/cluster.conf
- Edit /etc/hosts, ensure ovs222a ip addr = 192.168.0.207, not 127.0.0.1
(/etc/hosts should look like the following
127.0.0.1 localhost localhost.local.domain
192.168.0.207 ovs222a ovs222a.[your.actual.domain.name]
- Configure o2cb service, take the defaults which will start o2cb service on boot
# service o2cb configure
# service o2cb start
# service 02cb status
- Using OVMM2.2.0 GUI, create Server Pool
- Server Pool Name: [ovm2pool1]
- LEAVE SERVER POOL IP ADDRESS [BLANK], NOT NEEDED FOR SINGLE SERVER SERVER POOL
- LEAVE HIGH AVAILABILITY MODE ENABLE [UNCHECKED] (HA not available in single server cluster pool).
- Set [ovs222a], [192.168.0.207] as Server Pool: MASTER, UTILITY, VM SERVER with correct passwords.
- Test connection to [ovs222a]
- Create Pool

Hi
ThanQ For Reply Saurabh,
So Now I have to create one logon.jsp this jsp having username and password.
For Example http://sapmjd:50000/scw/logon.jsp
when i will pass the URLu2019s that time I am able to See logon Page. This .jsp is normal logon jsp looks like client logongape( logos, all available) By using this jsp how we will connect main URL i.e (irj/portal)
in logon.jsp I will pass UID and PWD that time I am logon into the Portal,
Could you tell me these Answes.
1. Is it possible to Connect main URL i.e (irj/portal) or customize par file having one jsp is there i.e jsp name umLogonPage.jsp. is it possible when I will pass the uid and pwd in logon.jsp this jsp will connect to the jsp umLogonPage.jsp.
2. If you says Answer YES How we will connect.
Regards
Vijay Kalluri

Two sockets in a single server

May I open two sockets with different listening port numbers in a single server? For each socket, the way to deal with the inputstream and outputstream is different. May the thread be like this:
public class twoSocketServer implements Runnable {
public twoSocketServer() {
try{
SSLServerSocketFactory fact = SSLServerSocketFactory.getInstance(rand, selfPrivateKey, selfCertificate, trustEngine, null);
serverSocket1 = (SSLServerSocket) fact.createServerSocket(ListeningPort1);
serverSocket1.setNeedClientAuth(false);
serverSocket2 = (SSLServerSocket) fact.createServerSocket(ListeningPort2);
serverSocket2.setNeedClientAuth(false);
} catch {...}
public void run()
while(true)
try
SSLSocket socket1 = (SSLSocket) serverSocket1.accept();
new handler1(socket1).start();
SSLSocket socket2 = (SSLSocket) serverSocket2.accept();
new handler2(socket2).start();
} catch {...}
class handler1 extends Thread {...}
class handler2 extends Thread {...}
Is there something wrong with this idea? If yes, how can I correct it? Thanks.

This is better :
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.util.*;
import java.io.*;
import java.net.*;
public class MultSrv extends JFrame
     JTextArea   panel   = new JTextArea();
     JScrollPane sbr     = new JScrollPane(panel);
     Vector      sockets = new Vector();
     Vector      servers = new Vector();
public MultSrv()
     super();
     SocServer ss1 = new SocServer(this,4444);
     if (ss1.servS != null) ss1.start();
          else               System.out.println("err");
     SocServer ss2 = new SocServer(this,4445);
     if (ss2.servS != null) ss2.start();
          else               System.out.println("err");
     SocServer ss3 = new SocServer(this,4446);
     if (ss3.servS != null) ss3.start();
          else               System.out.println("err");
     try
          InetAddress inet = InetAddress.getLocalHost();
          setTitle("MultServer v1 - "+inet+" Port=4444/5/6");
     catch(IOException e){}
     setBounds(10,10,400,450);
     setContentPane(sbr);
     panel.setEditable(false);
     addWindowListener(new WindowAdapter()
    {     public void windowClosing(WindowEvent ev)
          {   dispose();
               System.exit(0);}});
     setVisible(true);
     javax.swing.Timer ta = new javax.swing.Timer(2000, new ActionListener()
          public void actionPerformed(ActionEvent e)
               panel.setText("");
               for (int i = 0; i < sockets.size(); i++)
                    SocServer ss = (SocServer)sockets.get(i);
                    if (ss.servS == null) panel.append(""+ss.port +ss.err);
                         else              panel.append(""+ss.port +" Active");
                    panel.append("\n");
               for (int i = 0; i < servers.size(); i++)
                    Server server = (Server)servers.get(i);
                    panel.append(""+server.clnt.getInetAddress()+" Is serviced");
               repaint();
     ta.start();
public void go(Socket clnt)
     Server server = new Server(clnt);
     servers.add(server);
     server.start();
// The ServerSocket
public class SocServer extends Thread
     ServerSocket servS;
     int          port;
     String       err = "";
     Socket       clnt;
     MultSrv      mserv;
public SocServer(MultSrv mserv, int port)
     this.mserv = mserv;
     this.port = port;
     sockets.add(this);
     try
          servS = new ServerSocket(port);
     catch (IOException e)
          err = e.toString();;
public void run()
     try
          while (true)
               clnt = servS.accept();
               mserv.go(clnt);
     catch (IOException e)
// The Server.. one for each client
public class Server extends Thread
     Socket                clnt = null;
     OutputStream       out = null;
     InputStream        ins = null;
public Server(Socket soc)
     clnt = soc;
public void run()
     try
          ins = clnt.getInputStream();
          out = clnt.getOutputStream();
          while (true)
     catch (IOException e){}
     try
          ins.close();
          out.close();
          clnt.close();
     catch (IOException e){}
public static void main (String[] args)
     new MultSrv();
}

ARFC: Single Server and Load Balancing

Hi All,
I am trying to create aRFC model. In SAP logon screen, I can see two tab pages - Single Server and Load Balancing.
Can you please let me know when we have to use which tab?
Thanks
TG

Single Server Connect or Load Balancing connect is completely independend from the location where SAP Gui Client is installed.
Single Server connect means that your are directly connecting to an ABAP Server using hostname and systemnumber you have to provide.
Load Balancing Connect means that you specify the message server of the central instance of an ABAP Server group. The SAPGUI first connects to the message server which will provide the SAPGUI with the information about the best performing ABAP server. SAPGUI will then connect to this ABAP server.
Single Server is suitable for small landscapes with lets say less than 4 application servers. In huger configurations (and those which I know will grow to more than 3 servers)I would prefer to use logon groups - aka Load Balancing.
Peter

Connection Broker/RDWeb Single Server Setup.

Hello, I have a quick question for understanding how this configuration works that we just setup and I want to understand if I am driving this the right way and if we configured this in the
proper setup.
So..
Server 1 - RDWeb / Connection Broker
Server 2 - RDWeb / Connection Broker
Server 3 - Terminal Server 1
Server 4 - Terminal Server 2
Server 4 - Terminal Server 3
This was setup and I am asking the team to build these server to make a highly available environment so that we can grow and move applications here in the future. I would like the team to configure
the CB for High Availability then use our F5 to balance the Web Services. This should yield a very fault tolerant model for us, as I see it laid out and if you have suggestions or faults don’t hesitate to voice them.
However I am getting resistance and I am unable to understand where my logic is flawed. Does the High Availability on the broker balance the web services, I am being told that they do however
I don’t know how and I want to ensure I am operating off the correct information.
Thank you for any insight that you can provide for me on this.

Hi Jessica,
Thank you for your posting in Windows Server Forum.
As you want to configure RDCB high availability, I can say that you must have SQL server setup that can be used by RDCB server to store data. You also need to create a folder to store SQL database files. Also SQL Server Native Client is installed on all RD
Connection Broker servers. Static IP addresses have been assigned to all RD Connection Broker servers. DNS resource records with a single DNS name have been created for all RD Connection Broker servers that will be part of the deployment.
Please refer beneath article for more information:
1. RD Connection Broker High Availability in Windows Server 2012
2. Deploying RD Connection Broker High Availability in Windows Server 2012
3. Step by Step Windows 2012 R2 Remote Desktop Services – Part 2
Hope it helps!
Thanks,
Dharmesh

HFM and Database single server installation

Hi Everyone
I am trying to install HFM, FDM, HFR and database on single server (64bit 2008 R2 OS), I started with installation of 64 bit database(v11g Release2) which I have installed in my D drive rest everything remains at default path. Installation completes successfully, also I am able to login into the database through SQLPLUS.
Then I start my installation for clients which I am installing in c drive, installation of 32 bit client is successful and when I try to login through that client I am not able to login(TNS Protocol error).
Moving ahead with the installation of 64bit client, I am not able to install since it throws me an architecture error "Actual Value 32bit and Expected Value 64bit" if I install 64 bit first and then the 32 bit everything goes fine but I am only able to connect through 64 bit client and not with 32 bit.
Now I have few questions here..
1) Can I install database, HFM, FDM, HFR on single server (11gR2 and v_11.1.2.1) if yes what is the correct way???? Installing database first and then clients and then 11.1.2.1??? or what????
2) Why does it throw me an architecture error while it recommended to install 32 bit first and then 64 bit??????
3) If I install 64bit client first and then 32 bit I am able to make connectivity to database only from 64 bit so in that case after installing the suite I should run HFM atleast but I am only able to run it once the moment I take a restart of server everything goes down with "Apache bridge error" and then the 404 forbidden error.
If any one can guide me with proper steps for database installation and clients that would be great!!!!!
I am installing foundation services first then HFM followed by FDM and HFR.
Regards
Vikalp

The following blog post might help you:
http://blogs.technet.com/b/dpm/archive/2014/09/29/support-tip-dpm-2012-r2-ur3-agent-install-fails-with-error-0x80070643.aspx
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

Migrate from single server to multiserver path?

I'm looking to move from a single Exchange 2013server to multi server for HA, i.e. multiple database servers and client access servers. What the best way to migrate? I would like to keep the existing single server as a client access server. I'll
be using a hardware load balancer for the client access servers. Existing 2013 Exchange server has Windows 2012 Datacenter installed.
Can just make a new database sever and create a DAG then create a new client access server then configure the load balancer?
Thanks for any input on how to migrate from a single server to multiple server for additional HA.

Is there any benefit to using Server 2012 R2 vs Server 2012 R1? The single server is currently Server 2012 R1. Can I do an in place upgrade from 2012 R1 to R2 without messing up Exchange?
Here's my thoughts so far:
1. Make 3 additional 2012 R1 servers
2. On 2 of the servers install additional Exchange servers with mailbox database roles (it appears each new mailbox server comes with a database which I'll delete).
3. On the last new server, install CAS role
4. Create DAG with all 3 servers with database role
5. Add production database copies to DAG
6. Configure load balancer for CAS load balancing
Thoughts? Is the production database on the single server available while a copy is being made to the new mailbox database servers? Also, I thought I read some where to move mailboxes to DAG, but I don't see why if I can just add copies of the existing
database to the DAG group.

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB.

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB. Right now it seems to back up my users all day long. I set their time machine interval to every 5 hours but it still runs all day long and is very slow. Server is on a new Mac Server mini.

AFAIK, there is no user limit.. it is simply a question of the network load. AFP is a fairly clean protocol.. but TM is not.. it does a lot of testing of the backup.. infact your setting of 5hour gap could well make it worse.
I would sort out the clients that are doing 100GB backups to a different backup location.. no matter how fast your network.. 100GB takes time to backup.. and over wireless forever.. it will never end.
I guess some of these clients are on wireless?? I would separate the TM of wireless to those that are wired. No more than 4 or 5 wireless clients to a target device. Otherwise you are saturating your network with backup data. And use 5ghz.. so close by.. it is much faster than 2.4ghz and you will get much better transfer rates.

DLU or DSfW for single server setup using NOWS for Small Bus

I'm planning to install a single server in a 5 user office, plus a few remote users.
OES 11 SP1, ZCM 11, GW
As part of this I want to have single sign on to Windows workstations (Win 7), and could use DLU, but I also wonder about DSfW.
They both would achieve single sign on but in vastly different ways.
Which way to go? DLU or DSfW?

Originally Posted by drops
5 users? in my opinion everything is overkill then.
The 5 users is expected to grow to 10 within 3-4 months.
Overkill or not, no end user likes to have two different passwords when they logon, and most don't comprehend the difference between a local logon and the network (OES) logon. If there is a password change policy in place then the problem is compounded.
So the goal is single sign on with unique profiles.
Originally Posted by drops
if its only about desktop access with a local user you have several options
1. DLU
A good candidate, though I haven't used it for some time. Satisfies all criteria.
Originally Posted by drops
2. pgina LDAP auth - local gateway and novell client passthrough auth
Never used this...Is it easy to setup and reliable?
Originally Posted by drops
3. use a generic windows user
I've used this on a small Samba setup once, and it is workable, except for no unique user profile, and not ideal from a security perspective.
Originally Posted by drops
4. DSfw or AD (synchronized passwords)
I've never used DSfW hence my post here. My gut feeling is that it is more complex and difficult to troubleshoot than DLU so I'm leaning towards DLU. That said, I'm also interested on your comments of any PGINA implementations you've done, and if it should be considered.

SRM-SUS Single server,Single client

Similar Messages

Maybe you are looking for