SRM system architecture queries

Hi Gurus,
We are on SRM5.0 using classic scenario. Our backend system is ECC6.0 and we are using CCM2.0. Can you enlighten us from the following:
1. SRM system architecture
2. Inbound/outbound interfaces
3. SRM system document
4. Cross-client configurations
5. RFC setting
6. Number of objects/programs
Your inputs are very much appreciated.
Thank you.

Hi - you should find what you are looking for here:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000660282&_SCENARIO=01100035870000000202&
Requires login to the SAP Service Marketplace
brgs Ziggy

Similar Messages

  • Hi , MESSAGE_TYPE_X dumps generated in SRM system ...

    Hi all,
    Large no. of  MESSAGE_TYPE_X dumps generated in SRM system ...need solution for this dump.Looking forward for your suggestions...
    Regards,
    prakash

    Hi Kalakatla,
    Check all jobs running and probably ended by error, also check IDOC handling in BD71. The dump says something about token management. Possibly this is something with automatic user/password distribution to various systems. Your system landscape and/or architecture may have changed and something is not maintained accordingly.
    Regards,
    Clemens

  • System architecture check failed while adding a New Node in RAC

    Hi Friends,
    Environment:SUN Solris 10
    Cluster Version:10.2.0.3
    database Version:10.2.0.3.0
    Due to H/W failure one of our RAC node(prod1) got formatted.
    We have deleted the node(prod1) from RAC successfully.
    But When i am again trying to add the node and checking prerequistes i am facing the below issue.
    $ cd /software/oracle/product/crs/bin
    $ ./cluvfy stage -pre crsinst -n prod1,prod2
    Check: System architecture
      Node Name     Available                 Required                  Comment
      prod2        unknown                   64-bit                    failed
      prod1        64-bit                    64-bit                    passed
    Result: System architecture check failed.But issue is that prod2 is my active(running node), so how to resolve this issue?
    please suggest..
    Regards
    Umesh

    Resolved..
    Thanks...

  • Unable to create a PO in SRM system

    During cretion of PO in SRM system we are encountering the following situation:
    Prior to that we have configured all the initial settings as below:
    "Defining System landscape" on SRM side,(which updates the table BBP_BACKEND_DEST) we have defined it as type ERP_4.0 as we currently have an EhP4 backend .
    We are getting the error msg: No customizing entry for "SRICLNT801' in table BBP_BACKEND_DEST when I try to create a PO in SRM Portal.
    The following entries in BBP_BACKEND_DEST Table (this table is updated when Defining the System Landscape config) looks as below.
    For Backend ECC Clnt - 801, Log System - ERICLNT801, RFC Destn - ERICLNT801 , RFC Dialog - ERICLNT801_DIALOG,  Sys type -ERP_4.0
    For SRM local clnt - 801, Log System - SRICLNT801,  RFC Destn - SRICLNT801 ,  RFC Dialog - SRICLNT801, Sys type -LOCAL
    Any clue on this ?? Its been a while now and i have no idea why is this occuring??

    Hi there,
    I had a further look at our database. Please see the following information.
    in case of ECC EHP 4.0 the use of PI is mandatory. However, on your        
    on risk and keeping in mind that this is kind of a modification, you       
    could change the backend sys-type in table BBP_BACKEND_DEST back to        
    ERP_3.0; a further option would be to create an implementation in          
    the BADI BBP_DRIVER_DETERMINE, to call a customer own driver during the    
    transfer of documents to the backend.                                      
    1) In case you run a EHP 4 in backend, you need to set system
       type ERP_4.0 in table bbp_backend_dest, which requires the use
       of PI.                                                                               
    2) As prerequisite for activitaing LOG_MM_P2PSE_1, you need to have         
       EhP 4 installed in your ECC system, also the following business          
       functions need to be activated:                                          
       ESOA_OPS01, LOG_ESOA_OPS_2 and LOG_MM_CI_2                               
       (please also check the information and documentation about the BF        
       in your backend ECC system)   
    Hope this helps,
    Kind Regards,
    Matthew

  • Error deploying .sca files of SRM MDM Catalog 2.0 in SRM system

    Hi All,
    I'm trying to deploy the SRMMDM20SP02_2_BP_SRM_MDM.sca in SRM system but i'm getting the following error while deploying it.
    08/03/04 16:05:22 -  Start deploying ...
    08/03/04 16:05:22 -  EAR file uploaded to server for 16ms.
    08/03/04 16:05:22 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Error occurred while deploying ear file ./temp/deploy/work/deploying/srm_mdmcat_bp_webappr.ear.
                         Reason: None of the available containers recognized the components of application sap.com/srmmdmcatbp~webappr; it is not possible to make deploy.
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:570)
                              at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
                              at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
                              at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                              at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                              at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                              at java.security.AccessController.doPrivileged(Native Method)
                              at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                              at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
                         For detailed information see the log file of the Deploy Service.
    08/03/04 16:05:22 -  ***********************************************************
    Mar 4, 2008 4:05:22 PM   Info: End of log messages of the target system.
    Mar 4, 2008 4:05:22 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    I tried deploying using SDM and JSPM. Either way i'm getting the same error. Can anyone tell me what is going wrong and what is the container it is requesting???
    Thanks in advance.
    Regards,
    Seema

    Hi Tejas,
    Thank You for ur response.
    I am deploying on SRM server with WAS 7.0 so I guess that is not the reason. If you can notice in the error it is trying to find some container which it is not able to find. Do you have any hint what this container is??
    Also i would like to know what is the content of the SRMMDM20SP02_2_BP_SRM_MDM.sca. Does it gives us a UI like the Configuration UI?? If so can u please send me the link via which i can access it coz i didn't find any such link in the documents.
    Thanks and Regards,
    Seema.

  • Creation of backend contract from SRM system?

    Dear Experts,
    I am bit confused with the scenario of creation of backend contract from SAP SRM system? It says in few cases, based on the BAdi 'BBP_DETERMINE_Logsys', the system creates a backned contract directly in a backend ERP system. Why do we need when we have central contract?
    We can meet the same requirement through central contract where we will authorize only purchasing organizations of a backend system and block the contract for local sourcing in SRM?
    Secondly, How to find a contract / scheduling agreement created in a backend system when a central contract is distributed to the backend system?
    Thanks and regards,
    Ranjan

    Hello Ranjan
    question on contracts?
    Note 1476307 - Importing parameter not filled in BADI BBP_DETERMINE_LOGSYS
    in classic scenario , The Business wanted to create a contract from cockpit or via BID
    this BADI helps
    Symptom
    You have implemented BAdi BBP_DETERMINE_LOGSYS to control the system in which contract is created in following scenarios:
    1. Creation of contract from an accepted quote / bid.
    2. Creation of contract from a requisition in SOCO.
    In the method IF_EX_BBP_DETERMINE_LOGSYS~CONTRACT_LOGSYS_DETERMINE of the BAdi implementation, importing parameter IT_ORG doesnot have any values.
    Other terms
    Backend contract
    Reason and Prerequisites
    some business wants to create a backend contract from SRM . see some Dinesh Powale / Claude  threads for more understanding.
    Muthu

  • Automatic Replication of Vendors from SAP R/3 Backend System to SRM System

    Hi All,
    I am searching for any existing standard configuration in SRM V 4.0 System for replicating Vendors of selected Purchasing Organizations from SAP R/3 Backend System to SRM System.
    I have checked in the SPRO  settings of SRM System and found/could make out from the documentation avalable in help itself, that there is a standard configuration by which you can automatically replicate the Vendors created in SAP R/3 by activating the following in SPRO: By putting a tick mark against the Check Box existing against "Create New Vendors also"  under Vendor Synchronization with Make Global Settings I hope.
    If the above statement is correct, then I hope we have to schedule a job ,since the above configuration is based on a job based execution which should run at least once a day.
    In that case,which would be the relevant job which has to be created WITH A VARIANT in order to filter the Purchasing Organizations desired for.
    Please help me out since we have to implement this asap.And if the above solution is not at all feasible,then please do reply at the earliest.
    Awaiting for your early reply .
    Regards
    Annette

    Hi
    Please try this ->
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm</b>
    Regards
    - Atul

  • Determine linked SRM system in ECC

    Hi All,
    I need to be able to determine the linked SRM system from ECC in order to call a function module in SRM to return the URL for SRM to ECC to allow a workitem in ECC to contain a link to SRM.
    Table BBPC_RFC_DEST seems to hold a link but I've never seen this table used, does anyone know what this table is used for? The config help says:
    Definition of RFC Connections for Resource-Related Billing
    Use
    In this IMG activity, you define which connected SRM Systems are relevant for resource-related billing.
    Enter the logical system and the RFC destination.
    Requirements
    The connected SRM System must be Release 5.0 or higher.
    but would populating this table alone activate something else?
    Alternatively does anyone else have any other suggestions for retreiving the URL for SRM from ECC other than creating a custom table to hold the information.
    Regards
    Chris

    Hi all,
    perhaps I need to clairfy my question.
    I know how to find the URL in SRM, my requirement is to be able to work out the URL of the linked SRM system from within ECC.
    I have a couple of ideas such as call a function mdoule in SRM to read the user arrtibutes which will give me the URL for system. To do this I need to first determine the RFC destination for the linked SRM system, I think I can do this by populated table BBPC_RFC_DEST in ECC. However I sdon't know if popualtign this table in ECC will have any other implications?
    Does anyone know what the implications of populating table BBPC_RFC_DEST in ECC arE?
    or does anyone have an alternative soltuion for determining the URL for the linked SRM system from within ECC?
    Regards
    Chris

  • Logical system name in SRM system

    We are into SRM version 5.(SRM server 5.5) with the backend system as SAP ECC 6.0 .
    The logical system is defined as '0000000050' for backend SAP  system . All the systems like CRM and BW uses this as the logical system name for backend system . Recently SRM is implemented in our organization and we have no other choice and have to use the logical system name as '0000000050'
    When product categories are assigned in the org attributes , the system stores the back end system as  50 and this is the issue. SAP support mentions that this is issue with logical system naming convention and that need to be fixed . But they fail to understand that the same name works fine in all other systems and also in SRM system except product categories .
    Is there any OSS note for this fix. I would like to hear your experiences in this scenario.
    Thanks
    Mani

    Hi Mani,
    Logical System names are system specific, hence you have a different name in SRM system which will represent your backend system and this is not at all an issue. As suggested by SAP; '0000000050'  is not the best name as per best practices.
    You should have a name which should be of the pattern: <SID>CLNT<Client Number>.
    Now here is the solution/work around. But be very careful and try this in sandbox system before being carried out in Dev/QA/PRD systems. Please make sure no other users are performing any activity while these tasks are being carried out.
    In addition, please read through the ["Set up and system copy of SRM server 5.5";|https://websmp204.sap-ag.de/~sapidb/011000358700000310782007E/SRM50_SetupTranspCopy.pdf]  guide before you carry out this activity:
    The below activities are to be carried out only in SRM system
    I assume SRM & Backend are separate instances
    1. Create a new logical system name for the backend system in SRM system as per the standard suggested above.
    2. Then use the transaction BDLS, to convert the old logical system name to new logical system name in all the tables.
    3. Now, the step 2 ensure the logical system name is converted appropriately in all tables except SRM Org Structure related table.
    4. Use the report RHOMATTRIBUTES_REPLACE, for replacing all the old logical system value with new logical system value. Please note while providing the inputs in the screen, there will be a Checkbox field called "Sub-String", you must check this one for all attributes you enter in the report. Then when you execute the report, a list will be display, here you have to select all the rows and click the first button on the toolbar. Only then the attributes will be updated.
    Please let me know, if further inputs are required.
    Regards, Kathirvel

  • Multiple SRM Systems One SRM-MDM Catalog?

    Hi
    I'm currently upgrading our SRM 5.0 to SRM 7.01 with SRM-MDM Catalog 7.01.  Is it possible to use one SRM-MDM Catalog in our non-production environment and connect multiple SRM systems to it?
    For example our sandbox, development and QA SRM 7.01 systems would all connect to the same SRM-MDM Catalog 7.01.
    Thanks.
    Neil

    Hi,
    for non-production use and if it is just a catalog without custom coding running I see no problem in using one MDM server for multiple SRM systems (especially sharing one for sandboxes and dev). It is a setup I have seen multiple times and it worked always without problems.
    You should set up different repositories for each SRM system so that you don't interfere with each others data (i.e. suppliers or other lookups tied to SRM).
    You have to keep in mind that you have to upgrade all systems together. But you can always use separate MDM servers during the upgrade process and then consolidate onto one server when the upgrade is done.
    If you are running custom coding with your MDM catalog I would recommend having a separate MDM system for the QA SRM in order to be closer to the production set-up when testing your custom solution.
    Regards,
    Martin

  • Can we edit the System Report queries to add some missing fields ?

    Hello,
    I'm using SAP Business One 2005 A and I was wondering if there was a way to edit the system report queries.  Sometime, I'm only missing calculated fields in the existing report.  Something as easy as the difference between 2 dates is not working with the formula fields.
    Instead of rewriting everything, could we simply see that original query and edit it to add the missing fields ?
    I don't like the fact I can't add my own created report from a query in the main menu.  Since I couldn't do anything with the Backorder reports by default, I created mine with my own SQL query.  Can't I replace the existing one with my own ?
    Thank you
    Daniel Gagnon

    Hi Daniel,
    You can edit a system query but then you can only save it as a user query (ie you cannot overwrite the system queries).
    User queries can't be placed in the Main Menu using the standard GUI though you could add them to the User Menu tab so your users can get to them easily. I think to add them to the Main Menu would require the development of an add-on that updated the Main Menu and triggered the running of the query when the user clicked on the menu option.
    The other thing to look at is using XL Reporter for your reports rather than the Query Generator. With XL Reporter you can automatically add reports to the main menu.
    Kind Regards,
    Owen

  • Vendor Master can not replicate from SAP R3 to SAP SRM system.

    Hi All,
    We face one issue when we use bbpgetvd program to transfer Vendor master from SAP R3 to SAP SRM, after I check Analysis Application log, found the following issue:
    Error: No Bank Master Data Maintained No Bank Data Transferred
    Error: Name/Address for Vendor Already Exists Vendor: 0015118743 Address Number 0000054208
    Error: Warning: Complete Business Partner: Vendor: 0015118743 Backend: APP002TS No Transfer of Vendor Data
    But I check BP in SRM and can not find vendor 0015118743 information, so could you give me any tips or suggestions to fix this issue. Is there any table in SRM system to keep Vendor Master like SAP R3?
    Thanks for your kind suggestions or help in advnance!

    Hello Gavin,
    >
    Gavin Feng wrote:
    > (...)
    > 1. How to use BP to find business partner by address num 0000054208, I did not find this search condition.
    > (...)
    You cannot.
    Business Partner are stored in BUT000 table. I don't remember if its address number is also stored in this table.
    If yes, link is done directly between both.
    If not, this is the person number which is stored in BUT000. So, use your address number to get its corresponding person number using ADCP table. Then, with this person number, check in BUT000 what is its corresponding Business Partner.
    Finally, with its corresponding GUID, check in VENMAP table the vendor number.
    >
    Gavin Feng wrote:
    > (...)
    > 2. I used VENMAP and ADRC to check vendor 0015118743 and address num 0000054208, but there is no record in both table, so why the SRM system generate information that is "Name/Address for Vendor Already Exists".
    > (...)
    See my answer above concerning ADCP table.
    Regards.
    Laurent.

  • Smartforms on Purschase Order and Purchasing Contracts in SRM system

    Hi Friends,
        Can anyone provide sample example of smartforms on Purchase Order and Purchsing Contracts in SRM system?
    It is great, if you send me valuable material to create smartforms on PO and Purchase Contracts in SRM system.
    Thanks in Adv.
    BABA

    Hello BABA,
    Try this link. Hope this helps.
    [Re: Creating SRM PO with Smartforms BBP_PO;
    Please discuss this issues in SRM- General forum for better replies.
    Cheers,
    Suvendu

  • Writing the file in SRM system to FTP

    Hi experts,
    The FTP location for the file has been setup with some server,user/password.How do i dump the file in SRM system there.For this requirement, the above data ie., server name,user and password is enough or we need anything else?Can anyone please give me the required coding.
    Thanks,
    venkatesh.

    Hi,
    The following batch file (UPWIP001.BAT) will start an FTP session and pass the name of a text file (UPWIP001.TXT) to the FTP program. This text file will be processed by the FTP program and each of the statements in the text file will be processed in the sequence they appear.
    echo * This batch and text file illustrate the use of FTP to upload an
    echo * ASCII file and an EBCDIC or Binary file. The UPWIP001.BAT file
    echo * references UPWIP001.TXT that contains...
    echo *
    echo *   user
    echo *   password
    echo *   cd /web
    echo *   pwd
    echo *   ascii
    echo *   put d:\simoweb1\cbltxn01.htm
    echo *   binary
    echo *   put d:\simoweb1\cbltxn01.zip
    echo *   quit
    echo *
    ftp -s:upwip001.txt www.simotime.com
    The following is a listing of the contents of the text file (UPWIP001.TXT).
    user
    password
    cd /web
    pwd
    ascii
    put d:\simoweb1\cbltxn01.htm
    binary
    put d:\simoweb1\cbltxn01.zip
    quit
    Thanks
    Amit

  • How do I create a new shopping cart in the SRM system (not portal)

    Hi,
    I'm working on a test landscape with Purchase request WF. I want to create a new shopping cart from the SAP system, not from the portal, and this purchase request should go to a manager approval.
    I've been told that I need a SRM system.
    Could you please tell me what the transaction for creating new shopping cart is? Could you also explain me what to do with this transaction or point to a doc I can learn from?
    Thanks

    it is called planned driven procurement scenario in SRM
    ECC box
    1. create a Purchase request
    2. Approve the Purchase request
    3. now check EPRTRANS table . you might have Purchase request number ( if you have already set up done in ECC system for Plan driven procurement)
    4. Run BBP_EXTREQ_TRANSFER job
    SRM Box..
    5. Now you can see your shopping cart for this purchase request (External requirement) in the sourcing cockpit.
    Muthu

Maybe you are looking for