SRM TO R3 Integration

Hi experts,
I have a doubt concerning SRM integration in backend system (R/3). Is it possible to change PO data (for example cost center) while integrating with r/3 (for example with a badi).
Looking forward to hear from you,
Best Regards,
Mário.

Yes you can. Check this BADI BBP_CREATE_BE_PO_NEW (SRM 5.0) or BBP_CREATE_PO_BACK
Regards, IA

Similar Messages

SRM and XI Integration

hi,
can anyone provide me some good links,docs and blogs about SRM XI integration please.
and what would be the scenarios with SRM integrations?I mean are they like
SAP SRM -XI-R/3(or ECC)
SAP SRM -
XI----non SAP systems(i have read onb sdn SUS,EBS systems)
non SAP---XI---SAP SRM
SAP r/3(or)ECC--XI--SAP SRM?
what we need to use on SRM side (sender/Receiver)are they Idocs/RFC/proxies?and what we need to use on SAP R/3 side and thirdparty systems?
please clear me?
thank you,
babu

Hi Babu
SAP deliver a lot of XI contents for SRM.
For this have a look at service.sap.com/xi --> Business content --> SAP XI Content --> XI content delivered by SAP --> mySAP SRM
Also refer this realtive thread from jin shin
Re: Http server code 401 reason Unauthorized explanation Unauthorized
There are business package available for the standard SRM and XI integration. For this you can download from the service market place and you can make use of the standard SAP delivered objects.
Most of the time senario involves Idoc/RFC and Proxy here
Some of the docs from SAP service market place are-
go to https://websmp101.sap-ag.de/ibc -
>mySAP SRM-->and search
http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
Cheers..
Vasu
Reward Points if found useful **

Help me in SRM-XI-SUS Integration .

hi
Can anybody Send me Complete Procedure for SRM-XI-SUS Integration.
Thanks

HI
Refer this realtive thread from jin shin
Re: Http server code 401 reason Unauthorized explanation Unauthorized

SRM-XI-SUS Integration issue.

hi
Anyone help me in SRM-XI-SUS Integration.
My Requirement is
1)       Purchase Order
2)       Confirmation
3)       Shipping Notification etc. from SRM to SUS Through XI.
Please it is urgent.
Thanks

Kalam,
Check this thread for various questions on this integration:
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=srm-xi-sus%20&cat=sdn_all
---Satish

SRM B2B - OCI integration.

Hellow Team,
We are implementing SRM B2B - OCI integration to a third party intenet order system. We are planning to use the add on component of SRM server in ECC6.0 ( integrated SRM server).
Please let me know if any body done this kind of integration using the integrated SRM server.
Any inputs and suggestions for this kind of integration will be very much appreciated.
Thanks in advance,
Best regards,
Madhu

Hi Rafael,
The ISA Development and extension guide talks about OCI. I've also seen a printout of some info from help.sap.com about how to use OCI but don't have a link to it unfortunately.
Thanks,
Gareth.

SRM with HR integration

Hi Experts,
We are currently Using the SRM 4.0 with support pack 9 currently. Till I recieved the requests from business for creation of SRM user access, so I am creating the SU01 data and intergrating to the Organization structure using Users_Gen.
As we do not have the Security and Admin part currently for creation of SU01 data, we SRM team only maintains directly in the system.
Now my querry is like we have HR module implemented in the Project, so can we setup HR module integration with SRM whenever a user is created in the HR org structure he will then also to be also created in SRM? Is that Possible. if so Central User Admin should be in place? or what does this CUA means.
is this Viable solution now and how complex it is now?
For all these setups what are the prerequisties and how to setup this HR integration with SRM? can any one suggest me.
Regards
Srujan K

Hi,
HR replication from R/3 to SRM is carried out by following these steps:
1.) setting up the distribution model in SRM and R/3 for message type HRMD_ABA. You can set up number of filters in this message type, where you define HR infotypes, subtypes, object type and so on.
2.) Once you set up the distribution model, distribute the model.
3.) Report RHALEINI is used to replicate the distribution model from R/3 to SRM in the insert mode. (You can also use transaction code PFAL).
4.) Ongoing replication if performed in the update mode from R/3 to SRM will cause problems of users being broken in sporadic cases. It is advisable to use change pointers from BD14 to perform the ongoing replication.
There is an SAP documentation of EBP transports which explains in detail the replication.
https://websmp204.sap-ag.de/~sapidb/011000358700000310782007E/SRM50_SetupTranspCopy.pdf
Thanks
prasad s

SRM and ECC integration

Hi Gurus,
We are in a phase of integrating SRM with ECC, so that any master data created in ECC should be replicated in SRM etc...
Can any one provide me detail step by step configuration required to integrate SRM with ECC?
Any material witll be helpful.

Hi sanju,
see these links
https://www.sdn.sap.com/irj/sdn/articles-community?prtmode=print&startindex=261 - 38k
https://www.sdn.sap.com/irj/sdn/articles?startindex=21 - 46k
www.sap-press.com/product.cfm?account=&product=H2900 - 34k
thanks
karthik
reward me idf usefull

SRM-PI-ECC Integration issue

Hey All
There is some issue coming in Central Contact management scenario.
SRM 7.0
ECC 6.0 EHP 4
PI
*below is the error details we get in SXMB_MONI of SRM Sytem* <REMOVED BY MODERATOR>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSER">ITEM_UNEXPECTED</SAP:Code>
<SAP:P1><></SAP:P1>
<SAP:P2><Fault></SAP:P2>
<SAP:P3 />
<SAP:P4>ST: ST_XMS_MSGHDR30_SOAP_FAULT</SAP:P4>
<SAP:AdditionalText>System expected the element 'Fault'</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unexpected XML element <>; <Fault> was expected System expected the element 'Fault'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Narender
Edited by: Prateek Raj Srivastava on Mar 5, 2011 4:49 PM

Thanks Buddy.
We have some progress. Now data passed from SRM to PI and now stucked in ECC. The XML file in SXMB_MONI in ECC, shows the staus "Transfer to External Application" and in ECC SMQ2 Queue XBQRCCR4400000066 stucked with status "STOP".
While dubugging the relevant we are getting the error '"COMMNICUTION_FAILURE"
And the Payload .xml file is as below :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>E04BAF35-8357-83F1-82AD-005056A12FA9</SAP:MessageId>
<SAP:TimeSent>2011-03-11T07:14:32Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>SS1CLNT200</SAP:Service>
<SAP:Interface namespace="" />
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>ES1CLNT200</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/APPL/Global2">PurchasingContractSRMReplicationRequest_In</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/APPL/Global2">PurchasingContractSRMReplicationRequest_In</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnceInOrder</SAP:QualityOfService>
<SAP:QueueId>CCR4400000066</SAP:QueueId>
</SAP:ReliableMessaging>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2011-03-11T07:14:32Z" wasRead="false">
<SAP:Engine type="BS">SS1CLNT200</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>E04BAF35-8357-83F1-82AD-005056A12FA9</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2011-03-11T07:14:32Z" wasRead="false">
<SAP:Engine type="IS">is.01.auvimel00s971</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>E04BAF35-8357-83F1-82AD-005056A12FA9</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2011-03-11T07:14:33Z" wasRead="false">
<SAP:Engine type="BS">ES1CLNT200</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>E04BAF35-8357-83F1-82AD-005056A12FA9</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20110311</SAP:Date>
<SAP:Time>181433</SAP:Time>
<SAP:Host>AUVIMEL00S962</SAP:Host>
<SAP:SystemId>ES1</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>MSSQL</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>003</SAP:ProcStatus>
<SAP:AdapterStatus>007</SAP:AdapterStatus>
<SAP:User>RFCUSER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>001</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_RECEIVER</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>RECEIVER</SAP:PipelineIdExternal>
<SAP:PipelineElementId>1DC6B93B44BBA66BE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_INBOUND_PROXY</SAP:PipelineService>
<SAP:QIdInternal>XBQRCCR4400000066</SAP:QIdInternal>
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">SND_CENTR</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID">AC1E020C11E44D79CBD9E0A7</SAP:EOReferenceRuntime>
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="MSGID">E04BAF35835783F182AD005056A12FA9</SAP:EOReferenceOutbound>
<SAP:MessageSizePayload>2929</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>11916</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>2929</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>258</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>IENGINE</SAP:AdapterInbound>
<SAP:AdapterOutbound>PROXY</SAP:AdapterOutbound>
<SAP:InterfaceAction>DEL</SAP:InterfaceAction>
<SAP:RandomNumber>57</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="AUVIMEL00S962">20110311071433.211</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="AUVIMEL00S962">20110311071433.256</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="AUVIMEL00S962">20110311071433.257</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="AUVIMEL00S962">20110311071433.274</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="AUVIMEL00S962">20110311071433.274</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="AUVIMEL00S962">20110311071433.387</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_INBOUND_PROXY</SAP:Name>
<SAP:Timestamp type="begin" host="AUVIMEL00S962">20110311071433.39</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:System xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://www.sap.com/webas/712/soap/features/runtime/metering/" name="CallingType">SA</SAP:Record>
</SAP:System>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/XI/engine/?type=entry</Trace>
<Trace level="1" type="T">Work Process ID: 4580</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = ES1</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RFCUSER</Trace>
<Trace level="1" type="Timestamp">2011-03-11T07:14:33Z AUSVIC</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = E04BAF35835783F182AD005056A12FA9</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EOIO</Trace>
<Trace level="1" type="T">Queue-Id = CCR4400000066</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBQRCCR4400000066</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBQRCCR4400000066</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--start determination of receiver interface action</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface PurchasingContractSRMReplicationRequest_In</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/APPL/Global2</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Work Process ID: 2348</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = ES1</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RFCUSER</Trace>
<Trace level="1" type="Timestamp">2011-03-11T07:14:33Z AUSVIC</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
</Trace>
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="T">ROLLBACK WORK requested by application</Trace>
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="1" type="T">system-ID = ES1</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RFCUSER</Trace>
<Trace level="1" type="Timestamp">2011-03-11T07:14:33Z AUSVIC</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
- <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <SAP:Payload xlink:href="cid:payload-E04BAF31EF9CE7F189DE005056A10467sap.com">
<SAP:Name>MainDocument</SAP:Name>
<SAP:Description />
<SAP:Type>Application</SAP:Type>
</SAP:Payload>
</SAP:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Can anyone suggest what can be issue ?
Thanks
NAP

SRM to SAP integration

Hi,
I would like to know how this SRM EBP and SAP backend are integrated. I am looking the way its linked. SRM document information is transfered to SAP by Idoc(what is the message type ?) or any other way.
I have issue like Creation shopping cart with attachment and Its not transfered to SAP.
I have checked in SRM these attachements are exists in BBP_PD transaction. Not in SAP CV03N,
Cheers....Gopi

Hello Gopi,
PO transfer from SRM to R/3 system happens thru BAPI call.
PR transfer from R3 to SRM happens thru BAPI call.
Goods Receipt and Invoice docs are transferred from SRM to R3 thru IDocs.
Best Regards.
Pavan

SRM 7.0 Integration to Portal 7.0

Hi,
I have successfully integrated SRM 7.0.1 to EP 7.0. I am facing an issue in Bid Processing iview for RFx and Auctions. The event number's in the table are not clickable, i.e. I cannot get the new pop up details page on click of the event number, when I am accessing it through portal.
But, when I am accessing the Bid Processing iview from Backend, it is working fine.
Can anyone guide me what can be the issue.
Regards,
Khushboo

Hi,
Sounds like a browser issue. Try with IE 7 or IE 8 in compatibility mode on.
http://support.microsoft.com/kb/956197
Hope it helps.
Regards,
Lalit

SRM 3.0 integration with XI 3.0 for Supplier enablement scenario

Hi,
Iam trying to integrate SRM 3.0 with <b>XI 3.0</b> for Supplier Enablement Scenario. Can anyone please help me with the documentation for the same? I have downloaded documentation for SRM from service.sap.com/ibc but it contains steps only for XI 2.0.
Does anyone have the steps for XI 3.0?
Thanks and Regards,
Manish

Vadim
We are looking to integrate SRM 4.0 with R/3 ( ECC 5.0 ) using XI 3.0. I went to service marketplace to look for XI process content for SRM 4.0 - I could find XI content for SRM 2.0 only.
1) Do you know where SAP pre-delivered XI 3.0 process content can be downloaded from ?
2) Would you be having the cookbooks- possibly for all scenarios for SRM 4.0
If you could forward /give pointers to the above , I would appreciate your help. My yahoo id is [email protected]
Thanks for your help in advance.

RFC connection problem during SRM - R/3 integration

Hi,
Our environment is SRM 5.5 server with 2 R/3 backend systems. One of the R/3 systems is in another country. We happen to have RFC problems during the communication between the SRM and R/3 server.
Below you can find the SM21 log related to an operation on SRM server. What might be the reason for this problem? Does anyone know the solution?
Many thanks
Details Page 2 Line 26 System Log: Local Analysis of sapsrmt                  1
Time
Type
Nr
Clt
User
TCode
Grp
N
Text
10:24:58
DIA
000
013
EMREK
R4
9
Communication error, CPIC return code 020, SAP return code 223
Communication error, CPIC return code 020, SAP return code 223
Details
Recording at local and central time........................ 07.12.2006 10:24:58
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
91342
Dialog work process No. 000
EMREK
XXXXXXXX
2
K
SAP Web AS Problem
STSK
Further details for this message type
Module nam
Line
Error text
Caller....
Reason/cal
thxxhead
7192
020223
ThRecei
CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find more
detailed information about the error in the system log for the SAP
gateway.
Meaning of the SAP return codes:
1) Gateway errors:
221,,Error in CPIC-SS
222,,Storage bottleneck
223,,Network read error
224,,Network write error
225,,Invalid request
226,,No connection yet
227,,Gateway process terminated
228,,Shared-Memory problem(read)
229,,Shared Memory problem(write)
230,,No free LU
231,,No free gateway process
232,,Error when starting gateway proc.
233,,Incorrect communication type
234,,Connection setup failed
235,,Error in comm. table
236,,No connection to gateway
237,,Connection to gateway closed
238,,Error in GW command (write)
239,,Error in GW comm.   (read)
240,,Invalid length
241,,Invalid environment
242,,Timeout
243,,Error setting up SAP connection
244,,Partner has closed connection
245,,Storage overflow
246,,Incorrect APPC header version
247,,APPC server not started
248,,Error accessing TXCOM
249,,Comm. table is full
630,,Invalid mode no. received
631,,Max.no. of gateways reached
632,,No LU specified
633,,Max.no. of clients reached
634,,Invalid TP name
635,,fork failed
636,,Invalid NI handle
637,,rexec failed
638,,TP start failed
639,,NiDgSend failed
640,,Internal error
664,,Gateway host is unknown
665,,Gateway service unknown
666,,NI error
667,,exec failed
668,,R/2 restarted
669,,Symb. destination too long
670,,No more side-info entries
672 ,,Logon to NetWeaver failed
673 ,,IMS Error Purging
674 ,,Timeout for registered programs
676 ,,TP not registered
677 ,,Timeout for registered programs
678 ,,TP is registered
679 ,,TP is not registered
720 ,,Security breach of registered programs
721 ,,SNC deactivated
722 ,,SNC required
723 ,,SNC name not defined
724 ,,Default SNC name not permitted
725 ,,Protocol does not support SNC
726 ,,No local SAP System
727 ,,SNC required
728 ,,Conversation ID not found
729 ,,SNS must do the communication
730 ,,Start of external programs deactivated
731 ,,Gateway shut down
732 ,,No external programs
733 ,,Conversation ID does not match
734 ,,Net conversation error
735 ,,Monitor is not active
736 ,,Conv-ID is not unique
Errors in the CPIC Interface:
450 ,,No storage
451,,No side-info entry
452,,TP-START failed
453,,No initialization
454,,"getlu" failed
455,,"signal" failed
456,,Timeout during conn. setup
457,,CMALLC failed
458,,CMSEND failed
459,,Prepare-To-Receive failed
460,,"mc_flush" failed
461,,CMRCV failed
462,,Argument missing
463,,"get_allocate" failed
464,,CMDEAL failed
465,,TP-END failed
466,,Max.no.of conv. reached
467,,"snaopen" failed
468,,"snactl" failed
469,,No flush in IBM environment
470,,"snaclse" failed
471,,Status error
472,,No side-info entry
473,,No conversation
474,,Connection closed manually
475,,Connection closed automatically
476,,No partner found
477,,Confirm failed
478,,Confirmed failed
479,,GWHOST not in side-info entry
480,,GWSERV not in side-info e.
481,,PROTOCOL not in side-info entry
482,,LU not in side-info e.
483,,TP not in side-info entry
484,,No conn.to gateway
485,,gethostname failed
486,,SAP_CMACCP not executed
487,,Program not in argument list
488,,Host not in argument list
489,,Service not in argument list
490,,Conv-ID not in argument list
491,,Invalid parameter
492,,LU62CVCT failed
493,,LU62ATTCH failed
494,,No CONV table
495,,Incorrect conv.table
496,,Invalid conv modification
497,,NiHostToAddr failed
498,,NiAddrToHost failed
499,,Read operation tab.THOST failed
500 ,,No side info file exists
501 ,,CMRCV failed
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
6
245700
m
Error (Function,Module,Row)
R4
9
020223                                ThReceiCPIC-Erthxxhead7192

Hi,
It will be very difficult to solve without being on the customer site and having all information.
Right now, the error code is network error...
Kind regards,
Yann

SRM, MDM, ECC integration for central contract management.

Hi there,
I am questioned by a client with respect to the possibility of the following scenario -
1. There are several SAP back end systems in place.
2. SRM 7.0 will be implemented as single sourcing system.
3. The SAP back end systems carry different material master codes for the same material and this will remain the same and no cleaning effort to have a unique code across all systems is going to be done.
4. If we use MDM in the mix - will it be possible for the SRM system to act as a central contracting solution and create a central contract with the unique material code in MDM.
5. On distribution of this contract across to individual SAP back end system the back end should map the MDM code to correct material code in that respective system.
Any insights with respect to if this is possible with some enhancements or not at all possible will be highly appreciated.
Thanks and Regards,
Shantanu Joshi

Hello Shantanu Joshi
Your business scenario is standart MDM functionality
More about how it works you can read from:
MDM overview
and standart help links (see scenarios part):
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Kanstantsin

SRM -- MDM -- ECC integration for central contract management for SRM 7.0

Hi there,
I am questioned by a client with respect to the possibility of the following scenario -
1. There are several SAP back end systems in place.
2. SRM 7.0 will be implemented as single sourcing system.
3. The SAP back end systems carry different material master codes for the same material and this will remain the same and no cleaning effort to have a unique code across all systems is going to be done.
4. If we use MDM in the mix - will it be possible for the SRM system to act as a central contracting solution and create a central contract with the unique material code in MDM.
5. On distribution of this contract across to individual SAP back end system the back end should map the MDM code to correct material code in that respective system.
Any insights with respect to if this is possible with some enhancements or not at all possible will be highly appreciated.
Thanks and Regards,
Shantanu Joshi

Hello Shantanu Joshi
Your business scenario is standart MDM functionality
More about how it works you can read from:
MDM overview
and standart help links (see scenarios part):
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Kanstantsin

Stack overflow error when connecting to SRM with integrated ITS

When I try to connect to SRM Server through Integrated ITS, it is giving me the error "Stack overview, giSAPWP is null or not an object. Kindly let me know how to resolve the error.

Hi Arun,
Are you running with Portal ?
If yes, could you confirm the following point :
- portal and ITS of the SRM system run under the same protocol (both under http or https, ELSE it is not possible),
- portal and ITS of the SRM system are in the same domain
Kind regards,
Yann

SRM TO R3 Integration

Similar Messages

Maybe you are looking for