SRM user settings deletion (like in program SAPBBPAT05)

Hello experts!
I'm currently working on a user upload program
In this program I update some user settings which are available in the web interface via the "Settings" link in the header of the page
I already found how to add new attributes (thanks to the function module  BBP_CHANGE_ATTRIBUTES)
But I didn't managed yet to remove some attributes.
Does one of you know how to delete a line from user settings by using ABAP code?
Thanks in advance
Best Regards
Damien

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

Similar Messages

  • Incorrect search help for Delivery address in SRM User Settings

    Hi experts,
    We use SRM 7.0. When i want to change Users Attribute Delivery address (in SRM User Settings) and call search help for this, than  i get list with 3  identical  addresses.
    For example:
    Value                          Label
    111                         usa/Ny/1
    111                         usa/Ny/1
    111                         usa/Ny/1
    222                         usa/Sf/2
    222                         usa/Sf/2
    222                         usa/Sf/2
    333                         france/P/3
    333                         france/P/3
    333                         france/P/3
    How can I delete undue entries?
    Thanks a lot

    Hi
    Are all adreess numbers Unique ?
    every ship to address has unique . can you check data base level ?
    Muthu

  • SRM User Settings in SRM 7 for Operational role

    Hi! If I assign role /SAPSRM/OP_PURCHASER to a user in SRM (with Operational Purchaser portal role), I could not find the SRM User Settings function. If I use role /SAPSRM/EMPLOYEE (with Employee Self-Service portal role), the function appears under Home > Overview > Personalization. I checked the content content and could not see this function available for the Operational Purchaser portal role. Does that mean I have to add the Employee Self-Service portal role to the user if I want to allow them to use the SRM User Settings function? Is there another way to get to this function using the Operational Purchaser portal role?
    Appreciate any clarification on the above.
    Cheers!
    SF
    Edited by: SF on Jan 12, 2010 1:06 PM

    You observation is correct and it is the standard design of such portal roles as SRM Administrator, SRM Strategic Purchaser, or SRM Operational Purchaser to not have "personalization", but only Employee Self Service role.

  • SRM user settings not populated

    Hello,
    We are using SAP SRM 7.02 with NWBC and  we are testing this in sandbox.user id has been assigned to sap_all and new and SAPSRM/employee_ehp1 role.
    NWBC Launched --> Click on SRM user settings---> not populating the details/page navigation to details page is not opening.Pls see the screen shots.
    When click on the SRM user settings same page is opening.
    Please provide you inputs to resolve this.
    Ranjit.

    You observation is correct and it is the standard design of such portal roles as SRM Administrator, SRM Strategic Purchaser, or SRM Operational Purchaser to not have "personalization", but only Employee Self Service role.

  • SRM User Details

    Hello,
    We are SRM 7.0 connected to SAP HCM system for replicating users.
    I wanted to check from which tables I can get the details of the User Account details in SRM User Settings under Personalization.
    Regards
    Sathya

    Sathya
    I guess these documents will help you here...
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/a0d5e113-10b1-2d10-5193-87fb808f7074
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/d09945b9-17b1-2d10-e383-ae156a5e6e8f
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/50350f29-1db1-2d10-0194-d6a3bf01a5aa
    Regards
    Virender Singh

  • F4 Search in SRM Personal Settings

    Hi,
    F4 search for plants for a given company code in SRM personal
    settings are not available.
    Regards
    Sathya       
    Steps for Reconstruction    
    1. Login into SRM.
    2. Go to SRM Home
    3. Go to Personalization
    4. Go to SRM User Settings
    5. Select Company Code from the drop down and choose the backend system
    as ONE CLIENT ERP*.
    6. Add the company code 5101 or 5201
    7. Click on Save.
    8. Select Plant code from the drop down and choose the backend system
    as ONE CLIENT ERP* and click on edit. Then click on add a line.
    9. Press F4
    10. You will see a list of plants.
    11. Go to SE16 and table BBP_LOCMAP and for the same company code,
    check the number of plants available.
    There will be a difference in the number of plant available and number
    of plants displayed in F4. The same behaviour can
    be seen in F4 of Extended Attributes of Location in PPOMA.
    Is there a SAP Note to fix this?
    Regards
    Sathya

    Hi Sathya
    Check your F4 Search help in this case. There might be a restriction in number of entries due to performance reasons there....
    Regards
    Virender Singh

  • TS1702 Is there a way to lock out or restore original settings on an iPad used in a school lab setting. We need something like the program cornerstone, which will allow the iPad to revert back to its original setup.

    We setup iPads for a mobile lab and students change the settings or set up a pass code on the iPad. Is there a way to lock the settings folder or an app to revert any changes back to the original set up like the program cornerstone (for a pc)?

    you might need to post this question on iPad in the Enterprice community
    check these posts, it might help:
    https://discussions.apple.com/message/18419745#18419745
    https://discussions.apple.com/message/11401701#11401701

  • Srm User interface - change settings : Error in role assignment

    Hi Gurus,
    Users are facing issue when they are changing settings in the SRM user interface site .
    Go to SRM user interface SIte --> Change my settings --> change date format or decimal format .
    When they save it --> Gets an error - error in role assignment .
    What can be the issue. It's same in Dev and qa .
    Waiting for your reply.
    Points will be rewared .
    Thanks
    Munish Kumar

    Hello Munish,
    Laurent Burtaire wrote:
    If you do a where-used for message number i gave you, you will find two message calls in methods from /SAPSRM/CL_PDO_MO_USER_ACCOUNT class.
    Put a break-point to check if one of them is done. Problem cannot be due to missing authorization as there is no data in SU53 for concerned user.
    Regards.
    Laurent.

  • SRM 7 - hide user settings

    Hallo,
    we use SRM 7 with NWBC as web interface.
    I logon with employ role.
    In the Home Menu I press  SRM user Setting.
    In here I have 2 tabs: ´Position´ and ´User Accounts´
    Question:
    how do I make the ´Position´ tab invisible
    Thank you
    Marco

    Solved
    Enhanced the webdynpro component view in SE80.
    Thank you anyway
    Marco

  • User Settings in Multi-user setup?

    We are using two new CS5 editors in our news department.  We set the machines up on our Domain partly for being able to use NTFS permissions and because our IT department hates stand alone machines.
    The issue we are having is that each person logs in as a Domain User which give similar rights as a local user would have.  The editor seems to work fine and we don't seem to have any problems with doing this other than each user must setup about 15 settings for the first time.
    They have to change the location of where the project is created to the 500 GB E:\ drive that we have shared on the network (this is for being able to copy and entire project from one editor to the other), then they have to change the DV-NTSC preset for correct audio tracks and then change the General tab settings for Playback through DV Realtime Settings (why is this no longer the default, doesn't anyone still use tape??).  Then they save a preset.  After that the preset will give the correct audio and sequence settings except the "Playback Settings" does not seem to track from one project to the next.
    Then they have to change the source channel mapping to Mono so the two tracks we record in the field, Interview/standup on track 1 and Natural sound on track two don't come in as stereo audio. (this one seems to stay for new projects under that user)
    Then they have to change the audio hardware to enable the "line in" for recording tracks from our mixer.
    PHEW!!!, as you can see this is a time consuming annoying issue to have every user have to do this.
    Is there a way to make some of these settings the default for any user that uses the PC?  I don't want to go back to a shared project setup like we had under Avid as it caused a lot of issues with people deleting other peoples stuff.
    Any idea's on making these settings stick would be great,  Do I need to allow "Domain Users" full write acces to the Premiere Program Files directory?
    Thank you,

    The main reason for the separate accounts is for allowing each user to have a folder in the E:\ Drive on each editor will be the 1 TB Scratch Drive.  These system are only going to be doing DV video for now and will use only basic edits for News packages and VO/SOT's and such.  Nothing complicated unless they want to.  When users leave every two years (Market 195) we can just delete the user and their folder to clear them out, which gets rid of all the garbage people seem to leave on the desktop.
    We have two editors and a common problem with them being stand alone (as they were with the avid systems) is a reporter would go in to Edit 1 and capture or import from camera (nNovia Media Pack) the video for a news story.  Then due to having to rush out to get another interview or breaking news they would leave for a while.  When they get back there is another user in that bay using it for the next 30 minutes to an hour and so that reporter is forced for time issues to re-capture the same content into Edit 2.  This causes wasted time and frustration.
    Other stations in our company use a server with large amounts of storage, each user has a folder on that server with all their content.  Because you can not edit across the network drives due to latency issues, they copy the Project folder with all their captured clips and files to the local drive of the editor, and go to work editing.  Then after working on that project for a while they copy it back to the server that is Backed up and has many TB of storage.
    We can't afford to build that server now so I am settling for them to work on each editors Local 1 TB Scratch Disk in a Folder called "Edit 1 Projects"
    Then when a user logs into that folder and creates a Sub Folder with their name, e.g. "Sam Johnson" that becomes their folder.  Then I am having them create individual project folders under that, e.g. "School graduation VO", "Police shooting PKG".  Because that user "Sam Johnson" created the folder he has full rights to it by using the "Creator Owner" NTFS permission I set on the Parent Folder to propagate to the child folders.  All other Domain Users can read and use other peoples video, but they do not get "Modify" rights so no user can delete other users stuff. (Another issue we had problems with on the old editor) Only and Admin or in our case the news director can delete stuff.
    The plan behind all of this is the reporter would be able to, in the same scenario I outlined above, navigate the network to the shared drive of the other editor and copy/move the subfolder they need over the network.  After the copy (which includes the captured files and project file) they could open that project and keep working.  With Gigabit speed this should not take long for smaller projects.
    I haven't tested this other than it is similar to the Benchmark project I downloaded as a Zip.  When I extracted that, I was able to open it as all the source files were included.  I am sure there would be issues when the project/files gets so large that the time to copy is as long as re-importing from the tape/camera.
    Another benefit of this is users can navigate their projects on the two editors from their desk computer in the newsroom.  With a bit of training they will be able to delete the .avi files they no longer need.  Due to the video being the largest files, they can easily do cleanup without going into the bay at all. If they want to keep a great clip of B-Roll they shot, they can burn a Data DVD from their desk.  All of this is possible being on the domain and having user rights passed from one machine to another through their network login.
    If anyone knows of a major flaw to my idea I am not thinking of let me know,
    Thanks

  • Deleting Files and Programs - Again!

    Hi,
    I've asked this quesition slightly differently before and the responses have dried up, so I thought I'd try again as I've made some progress...
    I cannot drag a program (to uninstall it) or a file (to delete it) directly in to the Trash.
    If I drag the file or icon from anywhere other than the desktop, nothing happens, i.e. the file or icon stays where it is and the Trash remains empty.
    If I drag a file or program from the desktop, I'm asked for a password and the file is permanently deleted.
    If I drag a file or program from an external drive (USB Drive) it works properly (no password and it isn't permanently deleted unless I empty the Trash)
    I have set up a different user on my iMac and the problem is not replicated.
    Will someone please tell me why this should start happening or, better still, what I can do to revert back to normal.
    Thank you,
    Pete

    Downloaded BatChmod and reset the Sharing & Permissions settings - worked like a dream!

  • After restart, all user settings are gone and reset to defaults

    Hi after waking up my iMac from sleep today, it appeared something had gone wrong (apps not responding…notification that my external drives had "not been ejected correctly" etc). I restarted. After restart, and logging back in to my regular user account, all user settings were missing and reset to factory defaults: Desktop reset to the "wave", Dock reset, Download folder missing (grey question mark), Dropbox unable to connect, Safari bookmarks missing (but still on my iPhone-- so it's a local iMac problem, not an issue with iCloud), small things like mouse scrolling prefs reset etc.
    Basically all of my user preferences are missing. I've seen a number of threads about how to fix some of these items individually, but seems like there is a single corrupt preference file somewhere maybe?
    I've repaired permissions a few times (there were a lot), and restarted but nothing has fixed it yet.
    I had been logged out of iCloud, but once I logged back in, my Mail came back (just my me.com account-- still missing my Gmail, will need to reset I guess), along with Calendar and Contacts-- those are ok.
    I keep all my files on an external LaCie RAID, and that all appears to be fine. Folders all intact etc.
    Suggestions?
    Thanks for your help!

    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Mavericks
    Safe Mode - About
    Try running this program when in your old account and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • How to transfer user settings from one account to another (on the same Mac)

    I'd like to create separate user accounts for "work" and "play" (so that I can do things like have separate address books, etc...). However, I already have LOTS of personalized settings (trackpad behavior, login items, etc) that I'd like to keep the same between the two accounts.
    Is there a way to transfer all of the user settings from one account to another?

    You'll need to copy your /Home/Library folder. Make sure you back up first before doing the following. Log out of both your Work and Play accounts. Log in to a third account with administrator privileges. Assuming you are copying from the account called "work" to the account called "play", enter the following in Terminal:
    sudo rm -rf ~play/Library (this deletes Play's Library folder.)
    sudo cp -R ~work/Library ~play/Library (this copies Work's Library folder to Play's folder.)
    sudo chown -R play ~play/Library (this fixes permissions of Play's new Library folder.)

  • Non root user can delete root files, bug?

    We're having an odd permissions based problem on Solaris 10 u5 x86_64, (new install, fully patched as of 2 days ago) It means that non root users can delete root owned files, which is something I've never seen before, and I've been doing this for almost 10 years.
    We're installing into an 80Gb container on VMware ESX server 3.0.1. The OS takes 20Gb (2 processors, 4Gb memory, 8Gb swap) most of the remaining 60Gb is being used as both file systems and raw devices under disksuite as soft partitions. It's one of the file systems, /apps (where we plan to install sybase) that is giving us "issues"
    Essentially:
    # more /etc/vfstab |grep apps
    /dev/md/dsk/d0 /dev/md/rdsk/d0 /apps ufs 2 yes -
    # newfs -v /dev/md/rdsk/d0
    /dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
    newfs: /dev/md/rdsk/d0 last mounted as /apps
    newfs: construct a new file system /dev/md/rdsk/d0: (y/n)? y
    mkfs -F ufs /dev/md/rdsk/d0 20971520 -1 -1 8192 1024 264 1 546 8192 t 0 -1 8 7 n
    /dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
    Warning: 4096 sector(s) in last cylinder unallocated
    /dev/md/rdsk/d0: 20971520 sectors in 3414 cylinders of 48 tracks, 128 sectors
    10240.0MB in 214 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
    super-block backups (for fsck -F ufs -o b=#) at:
    32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
    20055584, 20154016, 20252448, 20350880, 20449312, 20547744, 20646176,
    20744608, 20843040, 20941472
    # mount /apps
    # ls -al /apps
    total 20
    drwxr-xr-x 3 root root 512 Sep 10 12:31 .
    drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
    drwx------ 2 root root 8192 Sep 10 12:31 lost+found
    # su - sybase
    Sun Microsystems Inc. SunOS 5.10 Generic January 2005
    sol10% cd /apps
    sol10% rm *
    rm: lost+found is a directory
    sol10% rm -rf *
    rm: cannot read directory lost+found: Permission denied
    sol10% ls -al
    total 20
    drwxr-xr-x 3 root root 512 Sep 10 12:31 .
    drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
    drwx------ 2 root root 8192 Sep 10 12:31 lost+found
    sol10% exit
    sol10% logout
    # chgrp sybase /apps
    # chmod g+w /apps
    # ls -ald /apps
    drwxrwxr-x 3 root sybase 512 Sep 10 12:31 /apps
    # ls -al /apps
    total 20
    drwxrwxr-x 3 root sybase 512 Sep 10 12:31 .
    drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
    drwx------ 2 root root 8192 Sep 10 12:31 lost+found
    # su - sybase
    Sun Microsystems Inc. SunOS 5.10 Generic January 2005
    sol10% cd /apps
    sol10% rm -rf *
    sol10% ls -al
    total 4
    drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
    drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
    sol10% id
    uid=***(sybase) gid=***(sybase)
    sol10% exit
    sol10% logout
    # pwd
    # ls -ald /apps
    drwxrwxr-x 2 root sybase 512 Sep 10 12:34 /apps
    # ls -al /apps
    total 4
    drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
    drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
    It's a new "bare metal" (in as much as there is no metal) install. I created the sybase user from scratch by hand editing passwd, group and shadow, buy copying and pasting the data out of the NIS maps. All I've done besides the install & patch is setup networking manually, and created the metadb's and the soft partitions and the mount points & newfs'ed & mounted three of them . I then changed ownership of /apps to be sybase:sybase, and handed it to the database team for the sybase install. they came back and said "should we be able to do this?" as they habitually run rm rf * knowing they can't delete root owned files, only now they can... This is true even if I just chgrp the directory and give them group write permissions. They can still delete anything owned by root, even if it doesn't have group permissions just like the lost+found directory. No other "real" machine we have, x86 or SPARC does this, but we've never installed u5 before either.
    As you can imagine losing the lost+found directory is a bit of a problem, however what's really worrying me is if they can do that, what happens when they run sybase as the sybase user? If it borks can they trash the OS and write/overwrite random files?
    It's a VM, so in as much that's not a problem, but the reason it's a VM is somebody wants to send a VM to a client as a demo, and at present it's highly unstable IMO.
    Does anyone have any idea where to start? My thoughts are that it may be a VMware issue, (though the hardware and the guest OS is supported) it could be a bug, because I've never seen that weird newfs error before, and then I found this:
    http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6622243
    Or it could be me, and the fact that I'm hand configuring it, and u5 now requires I do it "properly" with useradd, etc. I'd like to test, but the guy wants it built, and wants it now, so I patched it up, and gave it back to the database team and told them to be careful.
    I'd be interested in you opinions regardless.
    The full spec of the "machine" is below, sol10 is not it's name for obvious reasons, and I've hashed out the ID & GIUD for similar reasons.
    # uname -a
    SunOS sol10 5.10 Generic_127128-11 i86pc i386 i86pc
    # prtdiag
    System Configuration: VMware, Inc. VMware Virtual Platform
    BIOS Configuration: Phoenix Technologies LTD 6.00 09/06/2007
    ==== Processor Sockets ====================================
    Version Location Tag
    Pentium(R) Pro CPU socket #0
    Pentium(R) Pro CPU socket #1
    ==== Memory Device Sockets ================================
    Type Status Set Device Locator Bank Locator
    DRAM in use 0 RAM slot #0 RAM slot #0
    DRAM in use 0 RAM slot #1 RAM slot #1
    DRAM in use 0 RAM slot #2 RAM slot #2
    DRAM in use 0 RAM slot #3 RAM slot #3
    ==== On-Board Devices =====================================
    VMware SVGA II
    ES1371
    ==== Upgradeable Slots ====================================
    ID Status Type Description
    0 unknown ISA ISA Slot J8
    0 unknown ISA ISA Slot J9
    0 unknown ISA ISA Slot J10
    1 in use PCI PCI Slot J11
    2 in use PCI PCI Slot J12
    3 in use PCI PCI Slot J13
    4 available PCI PCI Slot J14
    # dmesg
    Wednesday, 10 September 2008 15:33:35 BST
    Sep 10 10:17:44 sol10 busra: [ID 490441 kern.info] NOTICE: ndi_ra_free: bad free, dip ffffffff803807a8, resource type memory
    Sep 10 10:17:44 sol10 busra: [ID 883242 kern.info] NOTICE: ndi_ra_free: freeing base 0xe0000, len 0x4000 overlaps with existing resource base 0x0, len 0xf4000000
    Sep 10 10:17:44 sol10 rootnex: [ID 349649 kern.info] pci0 at root: space 0 offset 0
    Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] pci0 is /pci@0,0
    Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
    Sep 10 10:17:44 sol10 Rev. 1 LSI, Inc. 1030 found.
    Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci1000,30 (mpt) instance 0 vector 0x11 ioapic 0x2 intin 0x11 is bound to cpu 0
    Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
    Sep 10 10:17:44 sol10 mpt0 Firmware version v0.0.0.0 (?)
    Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
    Sep 10 10:17:44 sol10 mpt0: IOC Operational.
    Sep 10 10:17:44 sol10 pci: [ID 370704 kern.info] PCI-device: pci1000,30@10, mpt0
    Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mpt0 is /pci@0,0/pci1000,30@10
    Sep 10 10:17:44 sol10 scsi: [ID 193665 kern.info] sd0 at mpt0: target 0 lun 0
    Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] sd0 is /pci@0,0/pci1000,30@10/sd@0,0
    Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /pci@0,0/pci1000,30@10/sd@0,0 (sd0) online
    Sep 10 10:17:44 sol10 unix: [ID 190185 kern.info] SMBIOS v2.31 loaded (1695 bytes)
    Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /cpus (cpunex0) online
    Sep 10 10:17:44 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dld0
    Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
    Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: i8042 (i8042) instance 0 vector 0x1 ioapic 0x2 intin 0x1 is bound to cpu 1
    Sep 10 10:17:44 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: i8042 (i8042) instance #0 vector 0xc ioapic 0x2 intin 0xc is bound to cpu 1
    Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: keyboard@0, kb8042 # 0
    Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] kb80420 is /isa/i8042@1,60/keyboard@0
    Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: mouse@1, mouse8042 # 0
    Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mouse80420 is /isa/i8042@1,60/mouse@1
    Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
    Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
    Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
    Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
    Sep 10 10:17:47 sol10 unix: [ID 557827 kern.info] cpu1 initialization complete - online
    Sep 10 10:17:47 sol10 rootnex: [ID 349649 kern.info] iscsi0 at root
    Sep 10 10:17:47 sol10 genunix: [ID 936769 kern.info] iscsi0 is /iscsi
    Sep 10 10:17:52 sol10 genunix: [ID 454863 kern.info] dump on /dev/dsk/c1t0d0s1 size 8197 MB
    Sep 10 10:17:53 sol10 pci: [ID 370704 kern.info] PCI-device: pci8086,7191@1, pci_pci0
    Sep 10 10:17:53 sol10 genunix: [ID 936769 kern.info] pci_pci0 is /pci@0,0/pci8086,7191@1
    Sep 10 10:17:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
    Sep 10 10:17:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
    Sep 10 10:17:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
    Sep 10 10:17:54 sol10 pseudo: [ID 129642 kern.info] pseudo-device: zfs0
    Sep 10 10:17:54 sol10 genunix: [ID 936769 kern.info] zfs0 is /pseudo/zfs@0
    Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
    Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
    Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: power0
    Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] power0 is /pseudo/power@0
    Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
    Sep 10 10:17:56 sol10 rootnex: [ID 349649 kern.info] xsvc0 at root
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] xsvc0 is /xsvc
    Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pseudo1
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] pseudo1 is /pseudo/zconsnex@1
    Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
    Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
    Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
    Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
    Sep 10 10:17:56 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
    Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
    Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 1
    Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 0
    Sep 10 10:17:56 sol10 genunix: [ID 640982 kern.info] ATAPI device at targ 0, lun 0 lastlun 0x0
    Sep 10 10:17:56 sol10 genunix: [ID 846691 kern.info] model VMware Virtual IDE CDROM Drive
    Sep 10 10:17:56 sol10 genunix: [ID 479077 kern.info] ATA/ATAPI-4 supported, majver 0x1e minver 0x17
    Sep 10 10:17:56 sol10 pci: [ID 370704 kern.info] PCI-device: ide@0, ata0
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ata0 is /pci@0,0/pci-ide@7,1/ide@0
    Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:17:56 sol10 scsi: [ID 193665 kern.info] sd1 at ata0: target 0 lun 0
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] sd1 is /pci@0,0/pci-ide@7,1/ide@0/sd@0,0
    Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: fdc (fdc) instance 0 vector 0x6 ioapic 0x2 intin 0x6 is bound to cpu 1
    Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: fdc0
    Sep 10 10:17:56 sol10 fdc: [ID 114370 kern.info] fd0 at fdc0
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] fd0 is /isa/fdc@1,3f0/fd@0,0
    Sep 10 10:17:56 sol10 genunix: [ID 314293 kern.info] device pciclass,030000@f(display#0) keeps up device sd@0,0(sd#1), but the latter is not power managed
    Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
    Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
    Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
    Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
    Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
    Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dtrace0
    Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] dtrace0 is /pseudo/dtrace@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fasttrap0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fasttrap0 is /pseudo/fasttrap@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: vol0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
    Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pool0
    Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] pool0 is /pseudo/pool@0
    Sep 10 10:17:57 sol10 ipf: [ID 774698 kern.info] IP Filter: v4.1.9, running.
    Sep 10 10:18:05 sol10 nfs4cbd[395]: [ID 867284 daemon.notice] nfsv4 cannot determine local hostname binding for transport tcp - delegations will not be available on this transport
    Sep 10 10:18:10 sol10 sendmail[598]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
    Sep 10 10:18:10 sol10 sendmail[600]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
    Sep 10 10:18:17 sol10 mac: [ID 736570 kern.info] NOTICE: e1000g0 unregistered
    Sep 10 10:19:10 sol10 sendmail[598]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
    Sep 10 10:19:10 sol10 sendmail[600]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
    Sep 10 10:20:10 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
    Sep 10 10:20:10 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
    Sep 10 10:24:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
    Sep 10 10:24:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
    Sep 10 10:24:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
    Sep 10 10:24:59 sol10 e1000g: [ID 801725 kern.info] NOTICE: pci8086,100f - e1000g[0] : Adapter 1000Mbps full duplex copper link is up.
    Sep 10 10:28:21 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
    Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
    Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
    Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
    Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
    Sep 10 10:35:17 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
    Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
    Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
    Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
    Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
    Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
    Sep 10 11:28:55 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
    Sep 10 12:28:56 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
    Sep 10 13:29:01 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
    Sep 10 14:29:10 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
    Sep 10 15:29:38 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
    # prtconf
    System Configuration: Sun Microsystems i86pc
    Memory size: 4132 Megabytes
    System Peripherals (Software Nodes):
    i86pc
    scsi_vhci, instance #0
    isa, instance #0
    i8042, instance #0
    keyboard, instance #0
    mouse, instance #0
    lp, instance #0
    asy, instance #0
    asy, instance #1
    fdc, instance #0
    fd, instance #0
    pci, instance #0
    pci15ad,1976 (driver not attached)
    pci8086,7191, instance #0
    pci15ad,1976 (driver not attached)
    pci-ide, instance #0
    ide, instance #0
    sd, instance #1
    ide (driver not attached)
    pci15ad,1976 (driver not attached)
    display, instance #0
    pci1000,30, instance #0
    sd, instance #0
    pci15ad,750, instance #0
    iscsi, instance #0
    pseudo, instance #0
    options, instance #0
    agpgart, instance #0
    xsvc, instance #0
    objmgr, instance #0
    acpi (driver not attached)
    used-resources (driver not attached)
    cpus, instance #0
    cpu (driver not attached)
    cpu (driver not attached)
    # format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c1t0d0 <DEFAULT cyl 10440 alt 2 hd 255 sec 63>
    /pci@0,0/pci1000,30@10/sd@0,0
    Specify disk (enter its number): 0
    selecting c1t0d0
    [disk formatted]
    Warning: Current Disk has mounted partitions.
    /dev/dsk/c1t0d0s0 is currently mounted on /. Please see umount(1M).
    /dev/dsk/c1t0d0s1 is currently used by swap. Please see swap(1M).
    /dev/dsk/c1t0d0s3 is currently mounted on /usr. Please see umount(1M).
    /dev/dsk/c1t0d0s4 is currently mounted on /var. Please see umount(1M).
    /dev/dsk/c1t0d0s5 is currently mounted on /opt. Please see umount(1M).
    /dev/dsk/c1t0d0s6 is part of SVM volume sp:d8. Please see metaclear(1M).
    /dev/dsk/c1t0d0s7 contains an SVM mdb. Please see metadb(1M).
    FORMAT MENU:
    disk - select a disk
    type - select (define) a disk type
    partition - select (define) a partition table
    current - describe the current disk
    format - format and analyze the disk
    fdisk - run the fdisk program
    repair - repair a defective sector
    label - write label to the disk
    analyze - surface analysis
    defect - defect list management
    backup - search for backup labels
    verify - read and display labels
    save - save new disk/partition definitions
    inquiry - show vendor, product and revision
    volname - set 8-character volume name
    !<cmd> - execute <cmd>, then return
    quit
    format> p
    PARTITION MENU:
    0 - change `0' partition
    1 - change `1' partition
    2 - change `2' partition
    3 - change `3' partition
    4 - change `4' partition
    5 - change `5' partition
    6 - change `6' partition
    7 - change `7' partition
    select - select a predefined table
    modify - modify a predefined partition table
    name - name the current table
    print - display the current table
    label - write partition map and label to the disk
    !<cmd> - execute <cmd>, then return
    quit
    partition> p
    Current partition table (original):
    Total disk cylinders available: 10440 + 2 (reserved cylinders)
    Part Tag Flag Cylinders Size Blocks
    0 root wm 1 - 131 1.00GB (131/0/0) 2104515
    1 swap wu 132 - 1176 8.01GB (1045/0/0) 16787925
    2 backup wm 0 - 10439 79.97GB (10440/0/0) 167718600
    3 usr wm 1177 - 1829 5.00GB (653/0/0) 10490445
    4 var wm 1830 - 2091 2.01GB (262/0/0) 4209030
    5 unassigned wm 2092 - 2614 4.01GB (523/0/0) 8401995
    6 unassigned wm 2617 - 10439 59.93GB (7823/0/0) 125676495
    7 unassigned wm 2615 - 2616 15.69MB (2/0/0) 32130
    8 boot wu 0 - 0 7.84MB (1/0/0) 16065
    9 unassigned wm 0 0 (0/0/0) 0
    partition> quit
    FORMAT MENU:
    disk - select a disk
    type - select (define) a disk type
    partition - select (define) a partition table
    current - describe the current disk
    format - format and analyze the disk
    fdisk - run the fdisk program
    repair - repair a defective sector
    label - write label to the disk
    analyze - surface analysis
    defect - defect list management
    backup - search for backup labels
    verify - read and display labels
    save - save new disk/partition definitions
    inquiry - show vendor, product and revision
    volname - set 8-character volume name
    !<cmd> - execute <cmd>, then return
    quit
    format> q
    # metastat -p
    d8 -p c1t0d0s6 -o 109973513 -b 61440
    d7 -p c1t0d0s6 -o 109461512 -b 512000
    d6 -p c1t0d0s6 -o 109051911 -b 409600
    d5 -p c1t0d0s6 -o 88080390 -b 20971520
    d4 -p c1t0d0s6 -o 67108869 -b 20971520
    d3 -p c1t0d0s6 -o 46137348 -b 20971520
    d2 -p c1t0d0s6 -o 41943043 -b 4194304
    d1 -p c1t0d0s6 -o 20971522 -b 20971520
    d0 -p c1t0d0s6 -o 1 -b 20971520

    An easy way to think of it is this -- everything in Unix is a file. Including directories; they are just a file which contains a list of the files in that directory, and pointers to them.
    If the 'sybase' user has write permission on the directory, they have permission to edit that "list", and can add or remove files to the list. It doesn't matter who the files on the list belong to, because the files are not what is being modified. Only the list of files is being modified. (Of course, in Unix, if you erase the file's listing from all of the lists it's on, the file itself goes away for housekeeping purposes.)
    One thing that would have stopped the 'sybase' user from removing the lost+found directory is if that directory itself had files in it -- without write permission to the lost+found directory, that user could not have removed those files, and since one cannot remove a non-empty directory, that operation would have failed. Since lost+found was empty in this case, it could be removed simply by having permission to write to the /apps directory.
    This behavior does change if you set the sticky bit on the directory -- in that case, files may only be removed by the owner of the file or directory, or if the user has write permission to the file. This would have prevented the sybase user from removing the lost+found directory. (Note, this also applies to the 'rename' function call.) This would probably be the best way to handle your situation, since you apparently do want the sybase user to be able to add files to /apps, but do not want them to be able to remove lost+found.
    Edited by: MadBishop on Sep 12, 2008 7:46 AM

  • Hi! Once I've deleted a purchased program and now I get it back to my itunes, but can't go back to my phone even it's shown on the monitor that it's on my phone already. But it isn't. Even if I syncronize it doesn't move to my phone. What can I do?

    Once I've deleted a purchased program accidentally and now I get it back from my iTunes, but doesn't move to my phone even it looks like on the phone by iTunes.
    How can I syncronize it to get back really the app to my phone?

    go to settings>general>restrictions and turn facetime ON

Maybe you are looking for