SRM Workflow error- Error' 9' when calling service ' SO_OBJECT_SEND'
Hi Team,
We are facing problem with SAP SRM Workflow error- Error' 9' when calling service ' SO_OBJECT_SEND' .
Due to this WI is not going to Approver/Requester INBOX and unable to process that WI.
Please advice .
Greatly Appreciated for Help.
Regards
CK
Hi,
Not sure what '9' is, the exceptions called by the SO_OBJECT_SEND function are as follows:
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 35
COMMUNICATION_FAILURE = 71
COMPONENT_NOT_AVAILABLE = 01
FOLDER_NOT_EXIST = 06
FOLDER_NO_AUTHORIZATION = 05
FORWARDER_NOT_EXIST = 08
NOTE_NOT_EXIST = 45
OBJECT_NOT_EXIST = 13
OBJECT_NOT_SENT = 15
OBJECT_NO_AUTHORIZATION = 13
OBJECT_TYPE_NOT_EXIST = 17
OPERATION_NO_AUTHORIZATION = 21
OWNER_NOT_EXIST = 22
PARAMETER_ERROR = 23
SUBSTITUTE_NOT_ACTIVE = 31
SUBSTITUTE_NOT_DEFINED = 32
SYSTEM_FAILURE = 72
TOO_MUCH_RECEIVERS = 73
USER_NOT_EXIST = 46
OTHERS = 1000.
Regards,
Jason
Similar Messages
-
Workflow Error -- Error' 9' when calling service ' SO_OBJECT_SEND'
Hi ,
Could you pls tell me what will be the reason for this Error' 9' when calling service ' SO_OBJECT_SEND'
Thanks & Regards,
GopalHello
reason could be lot of things:
check the note 938147 for example...
Another helpful note is the 190669
regards,
daniel -
Error '9' when calling service 'SO_OBJECT_SEND'
We are implementing travel module. The scenario is when the employee raises a travel request, after approving the mail should be sent back to the employee. This feature is provided by the standard.
However in the SEND_MAIL step the WORKFLOW Container variable 'Employee.Trip.User.Id' is not set owing to which the mail step gives out error.
Can anyone please guide us on the probable cause of the error ?? Where does the object TRIP gets the value 'TRIP.USER.ID' ??
Is it any setting issue ??
Please guide..Hi
Run report HRALXSYNC and you will solve this.
We have faced this issue many times and the solution we have applied is
1. This issue occurs on a step that is dialog where some agent needs to either approver or reject.
2. You should check the rule (Agent determination rule in that step).
Run that rule with the workflow data (use scenario with which you are getting error).
Run the rule individually and check if you are getting right result.
this error most of the time id due to the fact that the rule is not be able to determine next processor of the workitem.
Error 9 when calling service SO_OBJECT_SEND SWF_RUN535
to assure you can hardcode the user for test in the rule and run the workflow as that is the most effective analysis that will help you determine the cause.
I have never seen this error on a background step unless there is a mail step involved.
You need to run the report HRALXSYNC to synchronize HR objects which will surely solve this issue.
regards
barin -
Getting Error Message "Error '9' when calling service 'SO_OBJECT_SEND'
Hi All,
We are working on SRM5.0(with servier 5.5 paching 14) and ECC (R/3) with SAP appl 600(16 th patch).but the workflow is giving the error "Error '9' when calling service 'SO_OBJECT_SEND' and PO is still in the awating approval status.
Regards
Channappa SajjanarHi,
See this related thread:
Re: Workflow Error -- Error' 9' when calling service ' SO_OBJECT_SEND' -
Error '20' When calling Service 'SO_OBJECT_SEND'.
Hi Experts,
In my work flow I am using step to send mail.
While executing the workflow this step is throwing the above error 'Error '20' When calling Service 'SO_OBJECT_SEND'.
Please help me in this case.
Regards,
NayaniHi Nayani
Please go to the technical WF log, select the mail step in error and check the container element ADDRESSSTRING - it should have valid values. If there is no value or at least one line, that is the cause of your error.....this means you will have to correct the method/process/code/ where you are fetching the email addresses.
regards,
Modak -
Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
PalaniHi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM -
MSS - Business Event Details - Error Unexpected Exception when Calling RFC
Dear Experts,
Manager is getting the Error "Unexpected Exception when Calling RFC from Profile Application 'Business Event' when he tries to get the Training history of ONE employee in MSS. However, he is getting the details for the other employees of his department.
Any inputs on this?
Thank you.I believe it is our custom iView that is incorrect.
-
Infinite blocking when calling service other than "toupper"
Hi,
We are testing (trying) Tuxedo Connector between (from) WLS 6.1 (NT) and (to)
Tuxedo 6.5 (AIX). Calling the sample service "toupper" works fine. But WLS is
blocking when calling services that do not return the result in the same buffer
as input (as toupper does). When calling a Tuxedo service that returns its result
in a buffer it newly allocates (C library), from the WLS logging we see that it
was able to get the returned data size, but then it seems to block for the data
itself. Following are the two last logged WLS messages:
Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/read_dom_65_tfmh/130/-1>
Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/TuxedoMuxableSocket/dispatch/90/failure=-1>
Any idea? Thanks, Eric.See attachment (log from WLS) and following code snippet.
tupper(TPSVCINFO *rqst)
/* next line will work */
char* outMsg = rqst->data;
/* next line won't work, would get:
weblogic.wtc.jatmi.TPException: null
TPException.getDiagnostic(): 0
TPException.gettperrno(): 13
char* outMsg = (char*)tpalloc("X_OCTET", NULL, rqst->len);
for(int i = 0; i < rqst->len; i++)
out[i] = toupper(rqst->data);
/* Return the transformed buffer to the requestor. */
tpreturn(TPSUCCESS, 0, out, rqst->len, 0);
"Eric Poulin" <[email protected]> wrote:
>
Hi,
We are testing (trying) Tuxedo Connector between (from) WLS 6.1 (NT)
and (to)
Tuxedo 6.5 (AIX). Calling the sample service "toupper" works fine. But
WLS is
blocking when calling services that do not return the result in the
same buffer
as input (as toupper does). When calling a Tuxedo service that returns
its result
in a buffer it newly allocates (C library), from the WLS logging we see
that it
was able to get the returned data size, but then it seems to block for
the data
itself. Following are the two last logged WLS messages:
Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/read_dom_65_tfmh/130/-1>
Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/TuxedoMuxableSocket/dispatch/90/failure=-1>
Any idea? Thanks, Eric.
[weblogic.log] -
ERROR: -Type conflict when calling a function module
hi to all,
when iam executing the program in browser Type conflict when calling a function module error is showing, i have bind all the attribute correctly still iam getting error, WHEN I CLICK ON THE SEARCH BUTTON DATA IS NOT COMING TO MY TABLE ITAB1 plz help me....
DATA:
NODE_IP_SELECTION TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_IP_SELECTION TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_IP_SELECTION TYPE IF_PLANNING_HISTORY=>ELEMENT_IP_SELECTION ,
ITAB TYPE TABLE OF ZSL_PL_UPDATE1,
WA TYPE ZSL_PL_UPDATE1.
navigate from <CONTEXT> to <IP_SELECTION> via lead selection
NODE_IP_SELECTION = WD_CONTEXT->GET_CHILD_NODE( NAME = `IP_SELECTION` ).
get element via lead selection
ELEM_IP_SELECTION = NODE_IP_SELECTION->GET_ELEMENT( ).
get all declared attributes
ELEM_IP_SELECTION->GET_STATIC_ATTRIBUTES(
IMPORTING
STATIC_ATTRIBUTES = STRU_IP_SELECTION ).
CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
DATA:
NODE_PLANN_NODE TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_PLANN_NODE TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_PLANN_NODE TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
WA1 TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
ITAB1 TYPE TABLE OF IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE.
LOOP AT ITAB INTO WA.
MOVE-CORRESPONDING WA TO WA1.
APPEND WA1 TO ITAB1.
ENDLOOP.
navigate from <CONTEXT> to <PLANN_NODE> via lead selection
NODE_PLANN_NODE = WD_CONTEXT->GET_CHILD_NODE( NAME = `PLANN_NODE` ).
CALL METHOD NODE_PLANN_NODE->BIND_TABLE
EXPORTING
NEW_ITEMS = ITAB1
SET_INITIAL_ELEMENTS = ABAP_TRUE
INDEX =
ENDMETHOD.CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
Problem is here
check out the type GV_GJAHR whether it accepts string type.
thanks
sarbjeet singh -
DTP error: Type conflict when calling FM - after transport to Prd
Hi ,
i have asset_attr datasource.it was working in my BW dev.
however after transport to BW prod. when i try to upload data using DTP it gives me an Abrupt error
"0ASSET_ATTR IPDCLNT030 : Type conflict when calling a function module (fiel
Message no. RSDS666"
no more information is given, & the request ends in red.
This is first time i'm using this Infoobject upload.
however all my other transaction data & other master data all are getting uploaded fine.
even Asset_text datasource is working fine.
Did anyone face similiar probs ?
can anyone guide me on this error ?
thanks
rameshHi
Take a look at note 1130907.
Regards,
Chandu. -
HTTP Error (302) Found when calling Web Service on XI
Hi,
I have a scenario where a Client is calling a web service in XI using SOAP. The Client gets the response (302) Found. I don't see any message in XI Monitoring (SXMB_MONI).
The URL which is called has the following structure:
http://host:port/XISOAPAdapter/MessageServlet?channel=:<service>:<channel>&nosoap=true
Any idea why the call fails, i.e. what the error message (302) Found means?
Thanks in advance.
AlexHi Alex,
This link would give u the reason of the error
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
Also have a look at this note
SAP Note 857596 - Message server: Status code for redirect requests
Regards,
Prateek
Message was edited by:
Prateek Srivastava -
Errors in client when calling web service:
Here is my code:
public static void main(String[] argv) throws Exception
// Setup the global JAXM message factory
System.setProperty("javax.xml.soap.MessageFactory",
"weblogic.webservice.core.soap.MessageFactoryImpl");
// Setup the global JAX-RPC service factory
System.setProperty("javax.xml.rpc.ServiceFactory",
"weblogic.webservice.core.rpc.ServiceFactoryImpl");
Stub stub = createProxy();
stub._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY, argv[0]);
stub._setProperty("javax.xml.rpc.security.auth.username", "weblogic");
stub._setProperty("javax.xml.rpc.security.auth.password", "weblogic");
HelloWorldPort port = (HelloWorldPort) stub;
String returnVal = port.sayHello(4, "A");
System.out
.println("The client passed the Values 4 and A to the webservice, "
+ "and got back this result:");
System.out.println(returnVal);
-------------- ERRORS -----------------------------------
[java] <Jun 9, 2005 10:26:50 AM EDT> <Info> <WebService> <BEA-220024> <Hand
ler weblogic.webservice.core.handler.WSSEClientHandler threw an exception from i
ts handleRequest method. The exception was:
[java] weblogic.xml.security.SecurityConfigurationException: Service requir
es signed requests, but no Token was provided.>
[java] java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultExc
eption: Exception during processing: weblogic.xml.security.SecurityConfiguration
Exception: Service requires signed requests, but no Token was provided (see Faul
t Detail for stacktrace)
[java] Detail:
[java] <detail>
[java] <bea_fault:stacktrace xmlns:bea_fault="http://www.bea.com/servers
/wls70/webservice/fault/1.0.0">weblogic.xml.security.SecurityConfigurationExcept
ion: Service requires signed requests, but no Token was provided
[java] at weblogic.webservice.core.handler.WSSEClientHandler.processSpe
cs(WSSEClientHandler.java:324)
[java] at weblogic.webservice.core.handler.WSSEClientHandler.handleRequ
est(WSSEClientHandler.java:100)
[java] at weblogic.webservice.core.HandlerChainImpl.handleRequest(Handl
erChainImpl.java:143)
[java] at weblogic.webservice.core.ClientDispatcher.send(ClientDispatch
er.java:231)
[java] at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDisp
atcher.java:143)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:457)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:443)
[java] at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:2
90)
[java] at mil.dss.dcii.webservice.client.HelloWorldPort_Stub.sayHello(H
elloWorldPort_Stub.java:27)
[java] at mil.dss.dcii.webservice.client.Client.main(Unknown Source)
[java] </bea_fault:stacktrace>
[java] </detail>; nested exception is:
[java] javax.xml.rpc.soap.SOAPFaultException: Exception during processi
ng: weblogic.xml.security.SecurityConfigurationException: Service requires signe
d requests, but no Token was provided (see Fault Detail for stacktrace)
[java] at mil.dss.dcii.webservice.client.HelloWorldPort_Stub.sayHello(H
elloWorldPort_Stub.java:32)
[java] at mil.dss.dcii.webservice.client.Client.main(Unknown Source)
[java] Caused by: javax.xml.rpc.soap.SOAPFaultException: Exception during p
rocessing: weblogic.xml.security.SecurityConfigurationException: Service require
s signed requests, but no Token was provided (see Fault Detail for stacktrace)
[java] at weblogic.webservice.core.ClientDispatcher.receive(ClientDispa
tcher.java:313)
[java] at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDisp
atcher.java:144)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:457)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:443)
[java] at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:2
90)
[java] at mil.dss.dcii.webservice.client.HelloWorldPort_Stub.sayHello(H
elloWorldPort_Stub.java:27)
[java] ... 1 more
[java] Exception in thread "main"
[java] Java Result: 1I got it, I coded the WS with message-secured not access control.
thanks,
JT -
Getting Error ID 4625 when one service tries to access a shared path on another machine
Hi guys .. I have a scenario where there are two machines involved, both of which are using
Windows Server 2008 Standard. One is called the IS Server (has IP 10.1.1.89 and machine name bxtwmistv1) and the other is called the
MWS Server (has IP 10.1.1.88 and machine name bxtwmmwstv1). They are both part of the
infosix.root domain. Their users are also part of this domain. On the IS server, there is a drive, R:\, which is shared on the network through the UNC path
\\bxtwmistv1\R. On MWS server, there is a service called
MWS Service, which is supposed to access that shared folder \\bxtwmistv1\R. The MWS service is running using a domain username to start itself:
[email protected] On the IS server, I have given Full Control rights for the domain user [email protected], for the shared drive.
However despite doing all the above, MWS service is unable to access the shared folder, and when it tries to access it, I get the following error on IS Server's Event Viewer:
An account failed to log on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svcWebDev
Account Domain:
bxt1
Failure Information:
Failure Reason:
Unknown user name or bad password.
Status:
0xc000006d
Sub Status:
0xc000006a
Process Information:
Caller Process ID:
0x0
Caller Process Name:
Network Information:
Workstation Name:
BXTWMMWSTV1
Source Network Address:
10.1.1.88
Source Port:
55768
Detailed Authentication Information:
Logon Process:
NtLmSsp
Authentication Package:
NTLM
Transited Services:
Package Name (NTLM only):
Key Length:
0
I've tried my best to try and figure out what's wrong here, but I can't. Can someone tell me what might be the problem ?
Also, I tried logging into the MWS Server using the [email protected] domain user account (which the MWS service is using to start itself), and I was able to access the shared folder, and write to it as well.According to the post of the error, the wrong domain name is specified for the service:
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svcWebDev
Account Domain:bxt1
But you said the accounts were: "They
are both part of the infosix.root domain"
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years. -
PI 7.0 - Error HTTP 401 when calling XISOAPAdapter/MessageServlet
Hi experts,
I am trying to call a web service, published from our XI system. (SAP PI 7.0 SP 15).
I generated the Web Service & saved the WSDL successfully from Integration Directory.
The whole scenario is well designed and configured, because it had been working well for some time.
I am using XMLSpy to send a request (something that have been working well) but now, we are unable to log on to the system.
It doesnt matter with which user we try to log on. Its simply not possible. It raises a HTTP 401 ERROR.
The configuration channel SOAP SENDER is configured like this.
- SOAP - SENDER
- Transport Protocol HTTP
- HTTP Security Level : HTTP
- QOF - BEST EFFORT.
Another symptom
when i call the service http://<host>:<50nn00>/XISOAPAdapter/MessageServlet (on DEV system) it doesnt work.
"401 Unauthorized
Cannot authenticate the user.
Details: No details available"
when i call the same service (but on QA system) it works well.
(the calls from XMLSpy work fine, and the interface executes well)
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/NW04S_14_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
ModuleProcessorRemote not instantiated
I will appreciate if you could give me some advice, which configuration i need to check, or any usefull information.
Thanks!
Cristian.Hi Supriya, thanks for your reply.
I ve tryed with my user, which is not locked, and also with other users, none of them locke. With SAP_ALL and SAP_NEW profiles. And it didnt work.
The url is something like that.
for DEV:
http://myhost:50000/XISOAPAdapter/MessageServlet
for QA:
http://myhost:50200/XISOAPAdapter/MessageServlet
Since DEV and QA instances are on the same server.
Thanks.
Cristian. -
Hello,
I am trying to execute a SSIS package from SQL Server 2008 R2 stored procedure but getting error code 1 (as per my knowledge, error code description is as below:
0 The package executed successfully.
1 The package failed.
3 The package was canceled by the user.
4 The utility was unable to locate the requested package. The package could not be found.
5 The utility was unable to load the requested package. The package could not be loaded.
6 The utility encountered an internal error of syntactic or semantic errors in the command line.
Details:
I have a stored procedure named "Execute_SSIS_Package" (see below sp) which executes 'Import_EMS_Response' SSIS package (when I execute this package directly from SQL Server BID it works fine it means package itself is correct) and calling
it from SQL as:- EXEC Execute_SSIS_Package 'Import_EMS_Response'.
Here I receives error code 1.
Can anyone help me to resolve this issue please?
Thanks in advance!
CREATE PROCEDURE [dbo].[Execute_SSIS_Package]
@strPackage nvarchar(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @cmd VARCHAR(8000)
DECLARE @Result int
DECLARE @Environment VARCHAR(100)
SELECT @Environment = Waarde
FROM Sys_Settings
WHERE Optie = 'Omgeving'
--print @Environment
SET @strPackage = '"\W2250_NGSQLSERVER\BVT\' + @Environment + '\' + @strPackage + '"'
SET @cmd = 'dtexec /SQL ' + @strPackage + ' /SERVER "w2250\NGSQLSERVER" /Decrypt "BVT_SSIS" /CHECKPOINTING OFF /REPORTING E'
--print @cmd
EXECUTE @Result = master..xp_cmdshell @cmd, NO_OUTPUT
--print @Result
ENDIt has something to do with the security.
E.g. cmdshell is not enabled or the caller has not rights over the package.
There could be a syntax error, too.
I suggest you make the package runnable off a SQL Agent job then trigger the job from the stored proc with
sp_start_job <job name>
Arthur
MyBlog
Twitter
Maybe you are looking for
-
Went to update the ipod touch and it wiped out everything , Itunes keeps trying to restore it but fails everytime giving me an error that it cannot see my ipod yet it sees it and tries to restore it everytime i connect the ipod to the pc , the help f
-
All of a sudden old emails are reappearing as new, and are then duplicating themselves
-
FCX & Compressor 4 - output audio is hiss for older video/audio files
Hello - I'm using FCPX and Compressor 4. I'm compiling video files that go back to thirteen years old. FCX has been handling the files very well. They all look and sound as expected in the viewer and project playback. I've mixed the audio with an add
-
PXI - DAQmx tasks will not export to MAX 5.4
I am in the process of upgrading a PXI 1050 with an 8176 to an MXI bridge. The latest headache is that the CVI program had several DAQmx (tasks) defined in MAX 3.1.1 which will not export to MAX 5.4. I have been posting these additional questions on
-
Hello fellow Mac users, since a few days my MacBook Pro is running slow. It doesn't matter what I do, sooner or later the mac freezes (just showing the spinning wheel) for a few seconds and that happens very often, about every 2 minutes. The system r