SRM5.0 cookbook needed

Hi Gurus,
Could you please send me the SRM cookbook.
Please send the document(s) to my E-mail: <removed by moderator>
Many thanks in advance
Dirk

Hello,
can you please send the cookbook to me on my e-mail <removed by moderator>
Thanks in advance!
Best regards,
Pierluigi

Similar Messages

Portals in CRM

hi guys..
its me again....
i m 3 yr experienced in abap and nw goin CRM with abap. In fact i have just started. However though i came across peope centric user interface and portals..Now i m in serious doubts and want to knw few very basic things..
1) Is it compulsion to have enterprise portal knwledge for mySAP CRM??
2) wat exactly is the role of portal???
3) IF portals is compulsion , wat level of knwledge i need to have??
if possible can u send me sum docs and cookbooks needed for a starter at [email protected]//
thanks in advance...
gaurav

Hi Gaurav,
It all depends in which area you are intrested in. It is not at all necessary to have the knowledge of EP if you want to work in CRM. Even with your ABAP knowledge you are very much welcome in CRM world.
But if you want to works in e.g Internet sales it will be advantage if you have EP knowledge.
Allot points if my post helps!!
Best regards,
Vikash

Need cookbook for iPod environmental cover task

Folks:
My aim is to have my iPod Nano 1st Gen do this job: Play some "cover" noise as steadily and gaplessly as possible so I can listen and sleep through the night in some noisy hotels, etc.
I'm a computer professional with access to standard Mac tools (GarageBand, Final Cut Express), but I have no idea how to do this, and maybe my terminology isn't very good,either. Can someone point me to a cookbook and/or tell me how to do this in reasonably small steps, please?
Starting with a CD of that contains 1 hour of environmental sounds (rain), I want to isolate the "best" (most steady) rain segment --probably about 15 minutes-- and splice it together as seamlessly as possible. Transfer the result to my iPod and play in "repeat" mode.
I'm told that the "stock" 1st Gen iPod can't do gapless playback. OK, if so, is it possible to adjusting the gap to be minimal? Using fades to minimize the effect of gaps? (Experiments show full-volume to silence to full-volume is NOT good for sleeping!) It's also OK to minimize gaps by recording longer segments. Experiments seem to indicate a practical 30 minutes length limit on segments for Garage Band. That's not enough. I'm willing to devote a significant portion of my iPod storage to this purpose, ideally one 8 hour segment. Even 2 hour segments would be decent.
Variations: If there's an alternative source for high quality rain noise, I'd like to hear about it. As long as I'm wishing out loud, the most restful noise I can imagine is steady, hard rain on a metal or plastic roof. I have a Mac program that will play white or pink noise on the audio output, and that's pretty decent cover noise, but I don't know of a way of piping the output to anything usable to get it to the iPod.
TIA,
Henry

sandt33511 wrote:
ok I'm going to bite the bullet and do the database route. I'm going to attempt this via derby since it's built in to eclipse.JavaDB (Derby) comes with the JDK, so this choice works even w/o Eclipse.
Apparently this is going to be easier, although add work to re-creating the datalayerEasier that flat files? Hmm... YMMV. I suggested a real database because it's super useful to know how to do this. Flat files less so.
>
Off the bat I can see how you'd pull the list and put into an arrayOff the bat, you should take the JDBC tutorial:
[http://java.sun.com/docs/books/tutorial/jdbc/index.html]
>
now I need to figure out how to update/delete the records and add an image (which should just be a stored field)A couple tips:
1. Always use PreparedStatement over just Statement.
2. get something simpler up and running before adding images. Images are binary data, and to INSERT binary data
you would use method setBinaryStream:
[http://java.sun.com/javase/6/docs/api/java/sql/PreparedStatement.html#setBinaryStream(int,%20java.io.InputStream,%20int)]
>
i see something in regards to indexof... is this what I would use to match the records when updating?Huh? String method indexof? I don't understand the context.

SRM5.0 Cookbook

Hi SRM Experts,
I'm looking for the SRM5.0 Cookbook. Can anyone please send the cookbook to me on my e-mail [email protected]
Thanks in advance!
Best regards,
Peter

Hi Disha,
Can u please forward that to me too. your help will be highly appricated and i will reward full points for ur help.
My mail id is [email protected]
Thanking you,
lokesh kumar

Complete DW CS5 Cookbook for PHP/MySQL ebook needed

Complete DW CS5 Cookbook for PHP/MySQL ebook needed.
Please reply me a good link for download.
Thanks
or email me here: [email protected]

Sorry, I don't know of any e-books for that particular title.
Some links that may be of interest to you:
http://foundationphp.com/books.php
http://tinyurl.com/7vk4n47
http://tinyurl.com/yh6n8yo
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Need IC webclient Cookbook for CRM 5.0 version

Can anyone pls send me IC webclient cookbook for CRM 5.0. I have CRM4.0. And Any CTI documentation that would be really nice.
Thanks
Kumar

Kumar,
On <a href="http://service.sap.com/instguides">SAP Service Marketplace</a>, under mySAP Business Suite Solutions --> mySAP CRM --> mySAP CRM 2005 --> CRM Core and Standalone Components, you will find the cookbook.
Also take note of the guide on ERMS. This will probably part of your IC WebClient project.
Regards

Need a cookbook

Is there an example somewhere that shows, step by step how to login to lite? I had to come to the discussion board to find the scott,tiger,odbc:polite login (jeez) I will read a step by step but don't know where to go.
what is the password for system and what should be in host?
I just want to use lite for a college course to do an overview but need to be able to grant privledges to allow me to create and use a database.
Please point me in the right direction...
Thanks

In the time I tried some variations and ended with this:
// creating compound Object
iErr = sAIArt->NewArt( kCompoundPathArt, kPlaceInsideOnBottom, firstLayerArtHnd, &newArtHnd);
// inserting "Masterobject" (path wich surrounds the children)
iErr = sAIArt->NewArt( kPathArt, kPlaceInsideOnBottom, newArtHnd, &childArtHnd);
// creating and inserting children
iErr = sAIArt->NewArt( kPathArt, kPlaceInsideOnBottom, newArtHnd, &childArtHnd);
iErr = sAIArt->NewArt( kPathArt, kPlaceInsideOnBottom, newArtHnd, &childArtHnd);
iErr = sAIArt->NewArt( kPathArt, kPlaceInsideOnBottom, newArtHnd, &childArtHnd);
at least the result looks like what it should. It's a pitty that there ist no sample how to do it the right way from adobe. Or have I overseen it in "SnippetRunner" in the CS4 SDK. Would be a good place. I will add a request for the CS-Next Thread taht we need codesnippets for every function of the API (like it was in one of the very first SDKs of Freehand. They had a big word dokument which provided such stuff for every function).

Need CIC Framework Configuration Cookbook

Hi Experts,
Can anybody provide CIC Framework Configuration Cookbook?
Ankur

Dear all, the cookbook is available on SAP http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90c8d13d-5c56-3010-73bd-b4a493c7c14b?QuickLink=index&overridelayout=true&58029303136455 Best regards Christina

Need a cookbook for creating a compound Path

Hello together,
has anyone a short sample for creating a compund path with to pathes inside?
This doesn't work:
iErr = sAIArt->NewArt( kCompoundPathArt, kPlaceInsideOnBottom, firstLayerArtHnd, &newArtHnd);
iErr = sAIPath->SetPathClosed( newArtHnd, isClosed);
//Adding segments
// Adding one child
iErr = sAIArt->NewArt( kPathArt, kPlaceInsideOnBottom, newArtHnd, &childArtHnd);
//Adding segments to the child
iErr = sAIPath->SetPathClosed( childArtHnd, isClosed);
Should I first create a group? But how to change this group to an kCompoundPathArt Element?
best reagrds
Michael

In the time I tried some variations and ended with this:
// creating compound Object
iErr = sAIArt->NewArt( kCompoundPathArt, kPlaceInsideOnBottom, firstLayerArtHnd, &newArtHnd);
// inserting "Masterobject" (path wich surrounds the children)
iErr = sAIArt->NewArt( kPathArt, kPlaceInsideOnBottom, newArtHnd, &childArtHnd);
// creating and inserting children
iErr = sAIArt->NewArt( kPathArt, kPlaceInsideOnBottom, newArtHnd, &childArtHnd);
iErr = sAIArt->NewArt( kPathArt, kPlaceInsideOnBottom, newArtHnd, &childArtHnd);
iErr = sAIArt->NewArt( kPathArt, kPlaceInsideOnBottom, newArtHnd, &childArtHnd);
at least the result looks like what it should. It's a pitty that there ist no sample how to do it the right way from adobe. Or have I overseen it in "SnippetRunner" in the CS4 SDK. Would be a good place. I will add a request for the CS-Next Thread taht we need codesnippets for every function of the API (like it was in one of the very first SDKs of Freehand. They had a big word dokument which provided such stuff for every function).

Need CRM Technical Cookbook

Hai,
Anyone can send me the CRM Technical cookbook to mail id.
I will give points, if it is worth, Please send me any thing related CRM BSP and Workflow also.
My mail Id is : [email protected]
Thanks,
Tamil.

Hi Tamil,
I have sent you the required docs at [email protected]
For Workflows refer the following thread:
http://www.sap-img.com/workflow/sap-workflow.htm
http://www.sapgenie.com/workflow/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-press.com/product.cfm?account=&product=H950
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
Check the below PDF file on Workflow:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
There is a good book from SAP Press that I would
recommend as a starting point.It's called Practical Workflow for SAP and it is by Alan Rickayzen.
Reward points if it helps.
Message was edited by: Amit Mishra

Custom fields not display in SRM5.5 Basic Data Frame

Hello Everybody,
      I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
     No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
    I added these fields by help of 672960 OSS notes..
   Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
Is there anything else do i need to display custom fields in basic data frame??
I have one more question..
When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
To display all the fields which are display in GUI Mode also should display in URL..
To bring this functionality , What do i need to do?
I appreciate if you answer these questions..
Thanks,
John.

Hi Disha,
We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF". We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
I will be gald to provide any kind of info.
Thanks in advance...

New to InDesign: things I need to know before starting my 200-page book?

Hi there (second time attempting to post this; sorry if both somehow end up on the discussion page—this version is my most recent)—
I'd practically completed a 180-page cookbook—lots of photos and recipes, instructions and comments—in Apple Pages ('cause I'm on a Mac and Pages seemed pretty straightforward) when I realized that not being able to see the book in a facing-pages view was completely ridiculous. So I'm trying InDesign, and already I can see that this is THE app for what I'm doing. I purchased a hard copy of the InDesign Classroom in a Book 2014 book, which I'm slowly going through... but I'm so incredibly eager and going page by page is so slow. I will keep going through the book, but in the meantime, would people on this forum mind making sure I'm starting off on the right foot? (I don’t want to get too far along and then discover that I should have been doing things completely differently).
Question One: Many of my pages will be for recipes, of course—name of the dish at the top (white text on a black background), photo below, and below that the list of ingredients and the instructions. So should I create a Master Page just for recipes? That would seem to make sense, as all of the recipes will be organized on the page in the same way. But what about all the other parts of the book (Preface, Table of Contents, various pages of commentary, pages of photos, etc.) that are different from one another?
Should I create other Master Pages for other parts of the book?
Question Two: given that I’m planning to have all the pages printed at a printing house, and then bound into book form… should all my ‘left-hand’ Master Pages leave an extra wide margin on the right (to account for the part of the page that’s bound/glued) and, similarly, should all my right-hand Master Pages leave extra room on the left? How much extra room do I need for this?
Question Three: I really don't know enough about InDesign to even know what other question to ask, so maybe I'm safest to ask this: are there settings I should 'build in' now, so I don't find myself trying to do it later, when it's much more difficult? As I say, I'm going to keep struggling with the book (so many lessons seem to have nothing to do with my particular project, but I know I have to keep plugging away). I do want to get my cookbook off on the right foot though.
Thanks so much for any advice,
Malcolm

Presumable the book will be divided into sections (chapters) to make it more accessible. (1) front matter – title page, imprint/copyright, TOC etc. these tend not to have pages numbers (2) Individual chapters – e.g. Starters, Main courses, Puddings, Drinks (3) back matter e.g Index.
The simplest approach is to have page numbers on your master page with running headers – that is the name of the book at the top of the left hand page and the name of each chapter on the right hand page, and guides for the repeating elements.
Produce and print out a couple of specimen pages of the recipe pages to see how your design looks and how easy it is read/use and how you will allow in the design for short and long menu headings and recipes etc. Use paragraph, character and object styles in your design. You wouldn't need extra space for perfect binding, look at similar books of the same trimmed pages size to see what kind of margins they have.
The cover artwork should be produced as a separate document as it will be printed separately on heavier stock.
Check you have an economical page size for printing (talk to your printer) discuss the paper you might choose and how many pages in a printed section. Also what kind of PDF s/he wants.

Unrecognized Event Datatype Using ActionScript 3.0 Cookbook

This is my first time using Flash 9 Alpha (F9A)/ActionScript
3.0. I am using code from the ActionScript 3.0 Cookbook so I
assumed it would work immediately; this is not the case. I've
verified that my code looks exactly as it does in the Cookbook with
two exceptions:
1) the image file I'm using, which is located in the root
directory with the .fla file.
2) the Cookbook import statement for the Event class is
"import flash.events.Event;" but F9A didn't recognize ".events."
and gave me another error, three errors total. In response, I
changed the import statement to "import flash.event.Event;" and got
rid of that error, resulting in two errors total.
Even still I'm getting these two errors:
**Error** C:\Documents and Settings\Owner\My
Documents\My_F9A_Project\BitmapLoader.as : Line 15, Column 36 :
[Compiler]
Error #1046: Type was not found or was not a compile-time
constant: Event.
public function onComplete(event:Event):void {
ReferenceError:
Error #1065: Variable BitmapLoader is not defined.
Can anyone help me figure out what is going wrong with this?

flash.events is correct, and flash.event should not be valid,
I'm not sure what's going on there.
The other two errors are a because the class is not imported.
Event is not imported because, as noted, flash.event does not
exist. It should be flash.events.Event. And you also need to import
flash.display.Bitmap
AS3 doesn't get much attention here(probably because this is
a Flash forum, and there's not final release of Flash with AS3 yet,
although there is the public Alpha, as you know). I suggest the
actionscript.org AS3 forum. It's full of crazy Flex users, but the
AS3 portion is all the same.

CLEAN_REQREQ_UP SRM5.5 - Question re field entry

Hi
Within SRM5.5 for clean_reqreq_up, in the classic scenario, does the logical system field require an entry ie the backend system or should it be left blank ?
The reason for the question is that if a held LOCAL PO is deleted, the end users check status does not show this when the clean program is run with the backend logical system input, but if left blank, the status does show in the check status graphical view.
We have always run clean program with the backend system in on versions 2.0c, 3.5 and 5.5 and we had no issues, but after a few support packs, this is now a minor problem.
OSS message was raised, but it seems that we may not now need a logical system in the field.
Can anyone advise on how the job is recommended to be set for the logical system.
Thanks

yes. i schedule this job for every 3 minutes .
if you have more than one backend system it is definetly required.
even you can create a variant and mention logical system if you want.
Muthu

Need help in localizing the Flex Application

Hi,
I need help in localizing my Flex Application.
my Question is: How to make SPANISH as the default language of Flex Application(Progamatically)? By default its taking en_US as the locale but my requirement is to change it to sp_SP(SPANISH)..
Thanks in Advance..
Pradeep

Localization tutorial:
http://livedocs.adobe.com/flex/3/html/help.html?content=l10n_3.html
How to change the locale at runtime:
http://cookbooks.adobe.com/post_Change_Locale_at_the_runtime-11143.html

SRM5.0 cookbook needed

Similar Messages

Maybe you are looking for