SRM5.0 with Backend ECC6.0

Hi experts,
We actually have SRM5.0 / SAPKIBKT08 with Backendsystem Enterprise 4.7 and are upgrading to Backendsystem ECC6.0
In SRM-Customizing 'Define Backendsystem' I should change the Sys.Type accordingly but there is no entry possible for ECC6.0.
Does anybody know what effect this customizing setting has and whether it would also be ok to leave it with R/3 4.7 entry?
Many thanks for your help.
Regards,
Corinne

You need to set the value to ERP_2.0. This is the equivalent for ECC 6.0. If this not performed, then system will still use old Driver Functions and the RFC function modules called many not be appropiate and hence can lead to inconsistency.
Regards
Kathirvel

Similar Messages

Guide ep7.0 with backend R/3 4.7?

Hi, gurus:
where can i find ess configuration on ep7.0 with backend R/3 4.7?
in nw04 and nw04s, ep use JCo connects backend.
what connection type is used by r/34.7?
Thanks
Br,
Chrina

Hi Chrina,
If you look at the link below it states what SAP recomends your release should be for each business package:
https://www.sdn.sap.com/irj/sdn/contentportfolio
ESS 50.4 -> EP 5/6, R3 4.6C/4.7
ESS 60.2 -> EP 7, ERP 2004
ESS 1.0 -> EP 7, ERP 2005
I have implemented ESS 50.4 with EP7 and both R3 4.7 and ERP 2005. It can be done, but when I spoke to a contact from SAP they stated the landscape I was using was not recommend and there was no documentation availbale for the specific landscape. You have to use bits of documents from various guides.
Thanks,
Nick.

Problem in SRM (with backend PO)

Hi,
I have a problem in creating a PO with backend product category in backend. The error message is some backend documents could not be determined.
But I could able to create a PR Reservation and Direct PO for the same Product Category. (in the backend and in SRM too).
Org Structure:
I have maintained the transaction type in attribute tab. (backend/EC).
I have maintained the Product Responsibilties and Org Responsibilities for the Respective Pgrp. (Product Cateogeries)
I also have maintained the Product Categories in Extended attributes.
In SRM I havent maintained the transaction type for the EC but I have maintained the follow on document number range. (shopping cart)
The Transaction Type is maintained in the backend and the number range as external.
I have also maintained the Product categories in Technical Basic settings and defined the backend system with respect Product categories in Cross application basic settings.
Please let me know if you need any more information...
Thanks
Jagan

Hi Jagan,
If your SC is considered as complete by SRM (but with a fixed vendor and not a preferred vendor) the system will check if it can create a PO in R/3.
For this, each item will request a META_INTERPRETE_DATA to R/3, asking if it can create a PO. If R/3 considers this data as incomplete, it will reply to create a PR.
Usual cases of R/3 PR creation instead of PO:
- prefered vendor in SRM (and not a fixed one)
- custom checks in user exits in R/3
- error messages in R/3 (ex: O6 334 In the case of a fixed vendor, please enter info record)
Kind regards,
Yann

Lumira on HCP or Cloud Lumira server with backend as HANA DB

Hi
I have developed Lumira stories in desktop version and deployed in trial version of Cloud Lumira server.
But not able to connect HANA DB as backend to create stories in Cloud Lumira.
is there any way to create Cloud Lumira stories with backend as HANA DB ? i'm able to achieve this in desktop version and again not able to publish to Cloud Lumira.
i tried with Hana Cloud Platform trial account.
But i dont find Lumira Server on HCP. Only Cloud lumira is available where we are not able to connect with HANA DB.
Is Lumira is available on HCP ? or how to connect HANA DB with Cloud lumira server?
I'm new to Lumira developments, Any help would be appreciable.
Thanks & Regards
Yokesvaran Kumarasamy

I don't think you will be able to connect to those with trial accounts; those are typically limited in data sources
See Figure 15 here BI in the Cloud - ASUG Webcast Summary - Lumira Server on HCP is planned

Implementing Application gateway for 2 enterprise portals with backend syst

Hello Experts,
We have a scenario where in we have 2 different portal with backend SAP systems attached to them. We want to expose those to internet. we have an SSL certificate with a FQDN https://www.XXX.com
Can we have a mechanism in the application gateway wherein we can bifurcate the two portals by https://www.XXX.com/abc and https://www.XXX.com/xyz so that different users can logon to specific portal.
should we use a web dispatcher or apache reverse proxy for this scenario.
Awaiting your reply.
Regards,
Vinayak

Hi,
A while ago you had no choice then Apache Reverse Proxy...
Since a while now SAP has enhanced the Web Dispatcher so that one web dispatcher installation can handle more than one system. Check the following articles for details:
Overview: http://help.sap.com/saphelp_nw70ehp2/helpdata/en/03/afe24bfeb7419b9172ffb6e7636926/frameset.htm
Detail: http://help.sap.com/saphelp_nw70ehp2/helpdata/en/b0/ebfa88e9164d26bdf1d21a7ef6fc25/frameset.htm
Example: http://help.sap.com/saphelp_nw70ehp2/helpdata/en/b0/ebfa88e9164d26bdf1d21a7ef6fc25/frameset.htm
PS you still can choose to use the Apache Rev Proxy foor this but now you also have an native SAP alternative ....
Cheers and good luck,
Benjamin Houttuin
Edited by: Benjamin L.F. Houttuin on May 31, 2011 10:10 AM

How to link B2C basket (order page), with backend or IPC or JCo

Hi
It is in the standard flow of the B2C application, when we add the campaign on the header of the Order page, on clicking Update the prices donot get update.
If we click on the product catalog and again add same product to the basket, product to which the campaign is linked, we get updated prices.
This is a standard flow of B2C application.
If I come to change the Action class for Update, we need the fields to from salesDoc or Basket to get the Pricing condtions generated for the item on adding campaign to order jsp , using the stangard java class "PrepareIsaPriceAnalysisAction".
i.e
1.     IPC Connection Key: needed at header level of sales document.
2.     IPC Document ID: needed at header level of sales document.
3.     Item Id: present at sales document item level.
In the Action class for B2C, we are just getting item id as standard and not other fields from salesdocument getHeader() method, as we get in B2B.
If anyone in SDN, who has earlier worked on this issue and got some patch downloaded from SAP market place for standard appliaction of B2C. We are using service pack 4. Kindly help us in getting this issue resolved.
I am able to get all the values of campaign related data on the page and I am able to add the campaign in the sales document, but not able to link with backend or not able to get or create IPC info from the Backend using standard Bapi's for getting the information.
Kindly help in resolving the issue.
Thanks a lot!
Ekta
Edited by: Ekta on Feb 19, 2009 10:53 AM

Thanks Cormac!
Thanks for the quick reply. We have informed our Basis team member. Hopefully applying the patch shall solve our issue. If in case any further assistance is required, I shall get back to you.
Thanks!
Ekta

Compliance Calibrator Issue with Backend system

Hi Experts,
We have situation where we are unable to run any risk analysis from CC to our backend system.
The error we are getting is " Can not execute BAPI USERLIST, Invalid value in OPTION field of value table for IN itab operator"
and the RFC ID in R/3 system is getting below dump
" The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
statement in which the WHERE condition contains an IN itab operator.
The IN itab operator is used with internal tables which
have the following structure:
SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
The OPTION column should contain only one of the following values:
"EQ LE GE CP BT NE LT GT NP NB"
The value "##" is not allowed here."
The functin module is /VIRSA/ZCC_GET_USER_LIST
Recently we have upgraded our R/3 system to ECC6.0, after upgrade we are geting this error.
Please help us.
Thank you.

"Recently we have upgraded our R/3 system to ECC6.0, after upgrade we are geting this error."
During upgrade, what method (process) you followed to upgrade VIRSANH ? What is version of VIRSANH , is it 5.3?
Earliar was it VIRSA or VIRSANH installed on your system?
Do you also have SAP_HR component?
regards,
Surpreet

Special request with backend PO

Hi Gurus,
We are on SRM 5.0 using classic scenario. The system works fine according to the customizing in
SRM the source determination logic in MM. In the case of external procurement, the system is to always create a purchase requisition or, if the data is complete, a purchase order
In the classic scenario the purchase order is created on R/3 side.When we create a Backend purchase order or purchase requisition the system runs the price transfer from the contract/info record.
As for Special Request during shopping cart creation, sourcing is performed internally which a standard behaviour of the program when all needed information is available i.e., Material number, Vendor number in the shopping cart . It searches sequentially for possible source of supply and will apply that valid source in creating purchasing document when it is able to find in any of these -
>Quota arrangement --->, Sourcelist --->, Contract, ---> Inforecord. At that time, the only valid source available was the inforecord that is why the program was able to create the purchasing document in the backend using the inforecord as its reference. The PO was created in the backend since our present configuration via the customizing, for non-stock materials, it will trigger to create PO if item data is complete (able to find a source of supply) otherwise it with create a PR."
Can we prevent the use of the 'Info Record' when there is no valid contract/ source list? Our business requirement is for that a PO, with the exception of PO type ACMI, must be generated subject to a valid contract.
Thanks.
Jho

Hi Jho
Shows vendor using Purchasing info record in Source of supply tab
eventhouh the sos is selected by the user with inforecord ,please validate the sos vendor if it is a puchase inforecord by BBP_DOC_CHECK_BADI throw error message like please select a contract as Source of supply not inforecord".
regards
Muthu

Problem in connecting NWCE7.2 with backend R3 and BI

Hello Gurus
I have installed the NWCE7.2 for creating a pilot in which i have to show the compsite application for BPM involving data from backend R3 and BI. I plan to use the Visual composer for developing the pilot
In Portal - System admin - System configuration, i have set to two system one for BI and one for R3. But when i am running the connection test for connectors it is failing consistently.
For BI system it is giving error - Connection failed make sure user mapping is correct.and all connection properties are correct
For R3 - system it is giving error - Connection failed make sure user mapping is correct.and all connection properties are correct
I am using my SAP account. I have created a portal UME account with the same id as my SAP ID and using SAP Logonticket
Since i am new , can any one give me step by step process to create successfully the connectors to connect to BI and R3.
I had followed the steps mentioned in Sap.help.com and followed all the steps without success.
In the help page - http://help.sap.com/saphelp_nwce72/helpdata/en/48/a80b7a516b35b6e10000000a42189d/frameset.htm
I have followed the Maintaining RFC Destinations & Maintaining BI Server Connectionsbut am consistently failing to connect and thus not use the Visual composer to use the RFCs for the pilot.
Do I have to do any other setting as well, am i missing some configuration as well.
Can someone please help me resolve this issue
Thanksing in adavnce
Raghu

Followed the help.sap.com and resolved the issue

Mapping with backend

Hi,
Can any one send me the details on tcode "BBP_UPDATE_MAPPING".
So can u explain , what inputs we have to gve to different scenarios.
Regards,
RAghu.

Hi Raghu,
Let me explain to you the transaction precisely:
The Transaction has two screens, one on the top and the other at the bottom:
<b>Top Screen: Adjust Backend Reference:</b>
In multiple back-end scenarios, transaction BBP_UPDATE_MAPPING can be very useful because vendors that once have been replicated do not need to be replicated again from other back ends if their numbers are equal (top area). This transaction essentially will adjust those different numbers as one single number in the SRM system.
Example: You have 4 backends A, B, C and D and Vendor "Circuit City" has numbers as follows:
A- 100
B - 200
C - 300
D - 400
Now that you have already replicated circuit city from A (100) -> SRM, you dont want to overlap the same vendor with different vendor numbers. So, this transaction in the top area gives the ability to adjust the mapping of the local (SRM) vendor number to other vendor numbers in other backends.
The input parameter on the top area will be the logical system of the corresponsing backedn system for which you wish to perform an adjustment. Once you do this, SRM vendor number will have one to many mapping created. (i.e. Vendor Number 100 in SRM is same as Vendor Number 100, 200, 300 and 400 in backend A, B, C and D)
<b>Add/Delete/Change Backend (Bottom Area)</b>
The Bottom Area assists if a back-end has been replaced (for example, from test to productive), this can be switched very easily from this transaction (bottom area). In this area you can add, delete and change backends.
Hope this info helps !!
Pls assign points for usefull answers !!
Sundeep

Condition types in SRM for mapping purposes with backend contracts

Hello,
We need to map condition types for the creation of a Backend contract on the basis of a accepted bid.
We use SRM 5.0 but our products do not have prices in their product master!
We use the catalog funcion to indicate the prices of the materials. for service-items we manually add the prices in the Shopping cart.
How can I find out what conditions types we use in these circumstances in SRM 5.0?
What condition type are we using in the case of materials?
What condition type are we using in the case of service-items?
Thanks for any reply.
Aart

Hi
You can map the condition type 01CT (gross price) in SRM with PB00 for Gross Price in contracts. Standard SRM generally work with simple pricing with gross price condition types and do not have complex conditions unless you customize it. For material or services, it should matter from condition perspective unless you have done some specific customization.
Regards,
Sanjeev

MSS Component not connected with Backend system

Hello All,
In our NW Portal 7.01 system, we have got old Business package of MSS 60.1 & when we are trying to connect to our backend system R/3 4.7, we are able to connect it.
Now we have upgraded portal to EHP1 and then we are trying to do the same, then we are not able to connect to MSS business package, as we are getting TP Host missing error and connection not able to do with R/3 system
Has anyone come across such scenario? please update us asap.

Just 1 correction, we are able to work successfully with NW 7.0, but not after upgrade to EHP1.
So need to know, whether anyone is able to work with NW 7.01?

Best practice to develop internet app integrating with backend R/3 modules

While we wait to upgrade from R/3 4.6c, going forward we want to stop investing in ITS Flow Logic applications.
What is the best practice around using backend RFCs/BAPIs to expose SAP functionality as a web application that is accessible on the internet? One thought looks like using WAS 6.4 - utilizing JRA to call RFCs and using JSP/Servlet; another is to use Webdynpro based development. Will appreciate some architecture advice along side - especially if we also wanted internet surfers to set up user accounts. Thanks!

Hi Vito,
I do have the same situation as you and also some of the guys mentioned above as well. I have Portal only users and also users who uses the SAP GUI.
Thus, what I would advise, taking into consideration of audit as well, is to have the below scenerios:
1) Users who login to backend with SAP GUI on Citrix only
We have changed the system parameter: login/password_change_for_SSO=2
The password change dialog box appears and the password must be changed (input: old and new password). Also we have setup SNC (CyberSafe) so that in our SAP GUI, users can click on the system with SNC setup and login to backend without having to enter userID and password
2) Users who login to backend with SAP GUI on client (local)
Users will login with userID and password
3) Portal user with SSO and no login to backend vwith SAP GUI
Portal users will have their password deactivated.
Explaination to Audit for Portal users:
We have 90days password reset on Windows (AD). So our Portal users are respecting the audit request of having 90days password reset, but instead of having it in SAP, its in our Windows. Furthermore, SSO is setup as such that the coinnection for these Portal users to the backend is secure.
We are not able to set login/password_change_for_SSO=3 as we have sites which does not use Citrix. Thus, these sites will have local SAP GUI install.
Hope that can share some experience of mine to those who are also in my past situation.
Ray

Problem with the ECC6 Data sources after migration

Dear All.
I transfer all the data source which is required for sales overview cube 0SD_C03.
lets take two senairos.
for example take 2LIS_11_VAHDR to BI 7 and then i migrate this data source with Export option after that i activate the data source and then i initialize the delta request with data.
the request successfully generated in BI to R/3 but in monitor it shows in yellow for long period of time and no data arrive i wait for 30 min but nothing happen.
in second one i initialize the delta process for data source 2LIS_12_VCHDR this data source i did't migrate but face the same situation.
can you please explain what will be the cause of this and how i can manage to fetch the data from ECC6 client through Business content data source.
i did not migrate the update rules into transformations.
any help will be highly appreciated.
kind regards,
Zeeshan

yes that is what exactly happen i did not do any thing as in the previous update rules there are written complex abap routine.
please let me know how to generate the update rules as was there previously or if i have to revert the datasource back to the previous position what i have to do.
i have figure out that why the data is not coming from SAP just need steps that how to revert the data source or make the new transformations with generated update rules or transformation.
any help will be highly appreciated.
Kind Regards,
Zeeshan
Edited by: Zeeshan haider on Jun 2, 2009 6:02 PM

Mapping of SRM UOM with backend system UOM

Hi,
In the SRM system customization, where we can map the UOM's in the SRM system with the UOM's in the backend system?
Could you please explain navigation path in the SRM system?
Thanks & Regards
Ravi

Hi
You need to download the UOMS from Backend using CRM middleware.
DNL_CUST_BASIS3 is the object name.
Pls. check this blog for the procedure to download UOMs, Product categories and Products from backend.
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
Once downlaoded from backend, the UOMs are updated automatically.
Regards
Kedar

SRM5.0 with Backend ECC6.0

Similar Messages

Maybe you are looking for