SRM7.0 - PO status issue in ECS

Hi,
We are observing status (Tracking-Status) of ECS POs is always "In Transfer to Execution system". Can some body help me in analysing why is it so?.
We are working on SRM7.0-SP03 and we are observing above mentioned issue only in Extended Classic Scenario POs. We are not having any issues with replication of POS to ECC and creation of follow-on documents. This is fyi.
Regards,
GM

SAP Note 1366608 - PO status remains in "In Transfer to
Execution Syst."
Symptom
Sometimes the Purchase Orders (POs) in extended classic scenario (ECS)
remain "In Transfer to Execution Syst." status. Because of which the "Edit"
button is not visible in purchase order. Also, no confirmation or invoice
can be created.
Steps to reproduce the symptom:
1. Check the flag "Enable Consistency Checks in Back-End"
in ECS customizing (SPRO).
2. Create a new PO / Copy the existing ECS PO.
3. Click on "Check" button.
4. Click on "Order" button.
5. Check that the PO is successfully replicated to R/3.
6. Check the status of the PO in SRM side. The status of the PO will be
shown as "Ordered" when opened from portal. However, the intermediate
status "In transfer to Execution System" will be active which can be seen
in "Tracking" tab of PO.
In standard, when an ECS purchase order is successfully replicated to ERP
system the status "In transfer to Execution System" of ECS PO on SRM side
should become inactive.
Cause and Prerequisites
The problem is due to a program error.
The RFC sessions which are opened during the backend checks (with test run
- ON) are not closed properly, because of which the locks on PO objects on
ERP side are not deleted.
Backend Consistency Checks should be active in SRM.
Solution
Implement the attached automatic corrections using SAP Note assistant or
import the corresponding Support Package.
BR
MUTHU

Similar Messages

  • Status issues across multiple devices

    Hi. I seem to be having the opposite problem to most people reporting status issues. I have friends telling me I'm always away or offline in the evenings, even tho I have 5 devices I can use Skype on. My main 3 clients are my win7 work PC (which I quiet often leave on over night), my xbox one which is on most evenings, and my iPhone. I also have an iPad and win8 laptop But I only occasionally use these for Skype.
    Do I have to sign in to the Skype app every time I switch on my xbox one to get it to show me as online? Is there something else I need to do? Do you think it's because I have too many clients?

    When I try to go to iTunes music match on her phone it asks me to sign into match, which I am assuming is the same as her Apple ID name and password.  This is a different name and password than my account.  So, it seems that she cannot access my "cloud" from her phone in order to download music that I have purchased.  I guess since she has her own iClud account, she needs to sign up for iTunes match through that account and pay the fee.  I was hoping we could access the same 'Cloud" to have the same library of music? Hope that made sense.
    Thanks for the help.

  • Bundle Status Issues

    Hello,
    Several of our bundles are reporting their effective statuses incorrectly. For example, one bundle that makes a bunch of registry changes has been installed successfully on every device I've checked, yet it only reports as being effective on 34 devices, with 253 pending. This is definitely incorrect. Any ideas? How does Zenworks determine if all a bundles actions (ie. registry edits) have been completed successfully?

    hi
    i have this status issue also. i have 22 device succeeded, but when i click on it, it list's me no device.
    i really need this function, to control where it has installed and where not.
    i have ZCM 10.3.3. on SLES 10.
    have the debug activated, look at the zmd-messages.log but really dont know for what to search !!!!
    i opened a ticket, but they dont have a really fast solution....(no solution till yet).
    Sascha
    >>> Anders Gustafsson<[email protected]> 22.11.2010 09:50 >>>
    Chewmanfoo,
    > Thanks. 10.3.1 and I'll check the logs.
    >
    Note that you will need debug logging to see anything useful.
    Check zmd-messages, but make sure a zac emp wakeup
    is done first. See:
    http://www.novell.com/support/viewCo...rnalId=3418069
    - Anders Gustafsson (Sysop)
    The Aaland Islands (N60 E20)
    Novell has a new enhancement request system,
    or what is now known as the requirement portal.
    If customers would like to give input in the upcoming
    releases of Novell products then they should go to
    http://www.novell.com/rms

  • Hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.

    hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.
    please help. this issue prevents music from syncing. I have set the sync setting to convert songs to 192kbps AAC to save space, I figure that could slow the sync
    down, but it's hanging indefinitely (I've left it for 24 hours with out it completing.)
    the the only music that appears on the phone are songs purchased from the iTunes Store. 95% of my collection are rips from my CDs.
    thank you for any help!

    Yeah it's pretty sad that $1000 phone they put out you such cheap memory It causes issues, I have iPhone 6+128 GB actually this is the second brand-new one they gave me because they keep affording it trying to act like that's not the issue because they're too stupid to know how to check what memory is in each one before they give it to me when I have told them multiple times my back up runs perfectly fine on two 5s phones and a 6 64GB of course running MLC memory.
    I told them it's because just like the write ups say I have 809 apps but I have not even put all my music on the phone so I'm still running 50 to 60 gigs free and it crashes and reboots itself sometimes in multitasking and more often than it does that in between multitasking I get a black screen for 1 to 2 seconds in between apps and upon start up the Apple logo screen will flicker and do weird things, One of the genius idiots asked me if I could just delete some of my apps, really that's the answer to fix the phone the customer needs to limit the amount to apps they put on their phone, why the **** get a 128 gig if you can't put on anything you want to it guess they need to start selling them saying you can only put a limited number of apps on them, it's really is a **** joke, I have over $20,000 of Apple merchandise easily and always get the new phone every year but I'm starting to reconsider my decisions in the future because this company is starting to go downhill, The reason water not recalling the phones is because they're dealing with their top-of-the-line thousand dollar phones in this case and most people don't have over two or 300 apps so they're not having as many issues, so basically they have messed up phones they just don't know it in their hands and Apple is just too **** greedy to recall the phones, they'd rather sell customer spends that only work half ***.
    Stuff like this will be the downfall of their company, all the people that stay with them because as long as you don't jailbreak their stuff it normally just works without issue will be soon jumping ship if stuff like this keeps up, because I can guarantee they got me thinking now.
    not that I wanted to know or should I be expected to but I even offered for them to open up my brand-new phone and just replace the memory to MLC memory which is something I shouldn't have to do with a brand-new **** phone, they should just make one with the right memory and give me a new phone, actually just don't sell customers that buy the top-of-the-line phone from you trash ones in the first place that would be a great option.
    what burns me up the most is when you talk to AppleCare and Genius Bar they try to act like the issue isn't there and they're unaware of it, they say that Apple hasn't come out with any information about it, yeah that's because they don't want to recall the trash.
    Apple has became nothing better than your run-of-the-mill company, android is becoming just as good as they are sad to say this since I have been an Apple fan for so long but there is no excuse for BS like this they have been looking for options to fix my phone for a month now this is not the way you should treat loyal customers, I would've been better off keeping my 5S and in the future just switching to android.
    it's pretty sad that the company has no idea how to check which memory is in their **** phone and even after I offered to let them just replace the memory in my new phone by opening up my brand-new phone to replace it they have no idea how to do that either, yeah Genius Bar sure, I think that should change the name to idiot bar and Apple don't care instead of Apple care.

  • Purchase order status issue

    Hi Everyone
    I am having an issue with the status of Purchase order. When the Purchase order has single account assignment, everything is fine. But when I create a purchase order with multiple account assignment, the first line item is correct but when I ad second line, the still to deliver quantity gets added correctly but the amounts only reflect the recent item and not the previous one.
    For example:
    Item 10            Quantity 10           
    Item 20            Quantity 10         CC xxxx         GL account 666666
                                                       CC yyyy         GL account 666666
    Status:    Ordered        20              200
                    Still to deliver 20             100
    Please help me with this issue.
    Thanks,
    Shalu
    Edited by: Shalu G on Feb 9, 2010 12:07 AM

    Resolved myself

  • Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

    Hello,
    I'm seeing an issue that started this past Monday with no recent change to our environment. 
    External Outlook Anywhere users and Mobile users, OWA users are unaffected.
    Internal Users are affected when using Outlook of any version, 2010 or 2013.
    -Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
    1 . Using Cached Mode:
    a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
    on the workstations.
    b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
    c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
    The outlook icon in the system tray says "Outlook is requesting data from the server":
    2. Using Non-cached mode 
    a. No Login Prompt at startup, business as usual
    b. Free/Busy, Out of Office works fine. Autodiscover is fine.
    c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
    d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
    Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random. 
    3. Lync Pop up  for credentials often, though entering the password.
    URLs are correct. Autodiscover, EWS, etc. 
    Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node. 
    Not sure what is going on.
    Josh

    You have a hybrid configuration with Office 365, right?  You didn't provide this valuable piece of information.
    In Exchange Online PowerShell run this command:
    Get-OrganizationConfig | FL PublicFoldersEnabled
    If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders.  Be sure that you have legacy pubic folder interoperability properly configured.
    http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Transfer Order Status Issue

    Hi All.
    For the delivery we are Creating the Transfer Order using the Transaction LT03 . Currently we are having issue with Transfer Order status.When we look the document flow for the transfer order, TO status reads as "Completed" instead of "open" whereas deleviry status is still in "being Processed" status.
    Please give me the solition , why status goes to "Complete" status instead of "Open".
    Thank you,
    Cha
    Edited by: Chabalan on Oct 5, 2011 10:57 AM
    Edited by: Chabalan on Oct 5, 2011 11:00 AM

    Hi Cha,
    I thought it is a one-off issue.
    You mean the TO is not yet confirmed using LT12 but status already shows complete?
    Delivery is in correct status as the pick/pack and PGI steps are not completed..but for TO status, if it's confirmed then it should be complete.
    Pls confirm what's your scenario?
    Regards,
    Raghu.

  • PeopleSoft CS SAIP Announce Status Issue in Bulk Data Exchange Status

    XML is generated in the provided Directory Path under SAIP “Web Service Targets” but “Announce Status” is blank under Bulk Data Exchange Status, Even the “Event Message Monitor” shows nothing!
    We have activated all SAIP service operations and their delivered routings on our side.
    The Transaction status under Bulk Data Exchange Status page says Announced but but “Announce Status” is blank on the same page.
    Announce status should have any of these possible values per PeopleBooks (Connector Error,Failure,Processing,Success,Unsupported)
    What could be wrong? Please help. Thank You...
    Regards,
    Ashish

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • Work Status Issues - BPC 10.0 NW

    Hello,
    I am having trouble changing a work status setting that is approved to open.
    We have three settings, default, open, and approved. Approved has data loads locked to everyone. The other two are open to everyone.
    Only a manager can modify the statuses. I am a technical support analyst so I have full access and can change any work status. However, when I look at the selection for the new status, all I see is approved. It will not let me choose another option. And this is for a specific company and month (June 2013). If I take that same company I can modify the closed status to open for other months and for the same company.
    Status is set on company code and time.
    Does closing at different hierarchies cause issues like this? Just not sure why I am unable to change it. Any thoughts?

    Hi
    When you need open a company code, make sure you open the parent node first and try to open individual company code.
    You also need to populate the OWNER property for company code dimension.
    thanks
    ravi

  • Status issues with sales process

    Hi Friends,
    I have an issue with thrid party sales order processing
    Step#1
    My client runs the sales order for
    Material Qty
    p-100 10
    p-101 10
    p-102 10
    step-2
    Purchase requisition created and from vendor delivery happened
    Step-3
    My user created billing with reference of sales order for below material
    Material quantity
    p-100 20
    p-101 10
    p-102 20
    step-4
    user found mistake and he cancelled the invoice and created new billing document
    for
    material quantity
    p-100 10
    p-102 10
    again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
    material quantity
    p-100 10
    p-101 10
    p-102 10
    now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
    please suggest m

    Just checking to see if anyone has re-produced any of these issues...
    Thanks!
    Jason Walters

  • Adobe Air installation status issue via silent installation

    I installed adobe air silently, then installed an adobe air applicaiton silently.  Everything works, and I can launch the application.  However, if I use the status check via air.swf file it has the "available but not installed" and it can't retrieve the version of my air application.  Once I double click on "any" .air file, it launches the non-silent installer, and I don't have to even install or update the app, just lanching the iapp nstaller non-silently seemed to correct something.  From then on air.swf statu now returns "installed" and it can read the version of my app.  Can anyone tell me what's going on and how can I correct this?

    Ok, I understand.  So before we continue, we really need to figure out what the exact error is.  Can you, on at least 2 systems, generate the MSI logs we'll need?  Here's a document that explains how to enable logging and where to find the logs once they've been created:
    How to enable Windows logging
    Once you've enabled logging, try installing again.  Grab the newly created msi logs and either post here or email me at [email protected]  I'll examine the logs and see if we can find a common issue between the systems.
    Thanks,
    Chris

  • Po Requisition workflow pending status issue

    Hi
    We have updated some quantity from 200 to 250 for a requisition line and sent for approval,at this time the user who updated the qty did not have the email address in oracle user name.So requistion status is always showing as pending.We have updated the oracle User with email address and ran Sync WF local tables concurrent program.
    But we still could see requisition line in pending status.
    Could anyone please tell me how to restart the requistion or any other solution to solve the issue.
    Our apps version is 11.5.10.2
    Thanks

    Hi user;
    please follow below and see its helpful:
    Stuck POAPPRV Workflow Records At The Email PO Process Activity [ID 417722.1]
    View Approval Workflow Hangs With No Error for Approved Purchase Orders and Requisitions [ID 413272.1]
    APPROVE PO, WORKFLOW PROCESS, PROCESS HANGS [ID 1056081.6]
    Workflow Is Not Completing For PO Supplier Change [ID 554024.1]
    Regard
    Helios

  • EHP4 - Task Statuses issue

    Dear Experts,
    We have a situation after the EHP4 upgrade,
    we were able to configure Restatement & status reporting.
    But when we imported the Transport requests in another environments,
    We have issue with the task statuses.
    Like all the statues of the tasks in consolidation monitor changed to Initial stage.
    please help us understanding this. Is it expected or is it an issue.
    Do we have any remedy. can we get back the earlier statuses.
    We have a Go live on this upgrade. plz help us in this situation.
    Thanks
    Kamal
    Edited by: kamal kishore on Nov 12, 2009 2:39 PM

    Hi,
    After the upgrade we checked the status monitor & we found all the historical status of tasks were made to initialised status.
    As per SAP while regenerating the data basis system created new table for status rather than the old table (not sure why)
    Hence all the old period task status were made to initialised status.
    SAP made a fix in the system & we could solve the issue.
    Thanks
    Kamal

  • Employment Customer Specific & Employment Status Issue!!!

    Dear Experts,
                  More than 30 Employee's Customer Specific & Employment Status in Infotype 0000 is Wrongly Displaying as Customer Specific = M,  Employment Status = I . Instead of Customer Specific = Blank, Employment Status = Active, please advice how to correct this Issue waiting for your valuable Suggestions and advice.
    Thanks & Regards
    Khaiser

    Khaiser
    Employee's Customer Specific & Employment Status  will be displayed based on your Personnel Action From PA40
    the settings will be done in Table T529A ,  Once after correction you have to upload the data or else have to go with manual changes

  • ChARM - Change Request status issue

    We are currently testing our ChaRM processes.  The biggest issue we have with the ChARM system is that transports associated with a Change Request are being imported into subsequent systems regardless of the status of the change request.
    For instance...
    If I have 5 transports (each having their own change request) in which all 5 have been released from development and have been imported into the quality system. It seems that from this point on, if 3 of the 5 change requests have their status changed to "testing completed", the production import should only import 3 of the 5 tranports.  We assumed that if the other two did not have a status of testing completed, they would not be allowed to be imported into production.  This causes an issue because all 5 tranports will move to quality and subsequently move to production regardless of the status of the change request.  All 5 of these tranports are also on the same maintenance cycle.
    Is this the way the system is supposed to work?  If so, how do we utilize ChARM in a continuous maintenance production environment?
    Your response is appreciated, Thank You for your help.

    Thanks for the update.
    So, I guess my next question would be if Change requests and their associated tranports can be moved from one maintenance cycle to another after they have been submitted and released from Dev.  My concern is that in our normal production release environment has tranports that pass testing requirements at different times.
    For example, Lets say that we release transports into our production system, or "set to go live" for a scheduled import on Tuesday and Thursdays at 5PM. 
    On Monday, I have 5 transports from 5 different Change Requests that I develop and release the DEV environment. On Tuesday, 3 of the 5 transports have been successfully tested and are cleared to go to Production, however 2 of the Change Requests did not have testing completed.
    Is it possible to move the 2 transports to a subsequent maintenance cycle so that the first 3 that successfully passed testing can proceed to go live and import on Tuesday at 5PM?
    My concern is that we do not always know upon development release when the Change Request and associated transport will be permitted to go to production.
    Thanks much for your help.

Maybe you are looking for