SRP521W - Local and Remote Traffic Cannot be the Same Subnet Address
I support an existing VPN infrastructure with PIX, Juniper NS5GT, and Netopia devices used as VPN endpoints. In all cases, I can create a VPN where the location's internal subnet, 10.x.y.0/24 sends traffic to 10.0.0.0/8 out the VPN tunnel. In the case of this 521W that we are evaluating, it appears that I cannot do this. Insteadm when creating the IPSEC policy I get this error "Local and Remote Traffic Cannot be the Same Subnet Address." Which, while strictly true, has never been an issue with all the above devices. Is there a workaround or other methodology to support this?
Thanks.
We have extactly the same problem with the SRP527W. Other Cisco small business products work like.
Cisco RV 120W
http://www.cisco.com/en/US/products/ps10852/index.html
Cisco WRV210
http://www.cisco.com/en/US/products/ps9929/index.html
We need a device with that supports one IPSec VPN and one ADSL interface and is easy to use like these devices.
Similar Messages
-
Clusters cannot use the same multicast address
Hello All,
Found following error while starting of managed server in weblogic.
error***
<Aug 22, 2012 4:40:57 AM GMT-06:00> <Error> <Cluster> <BEA-000166> <Some other c
luster in this domain is configured to use the same multicast address as OIM_CLU
STER. Clusters cannot use the same multicast address.>
error***
I have three managed server and two cluster.
CLUSTER NAME >> MANAGED SERVERS IN CLUSTER
OIM_CLUSTER >> admin server and oim_server1
SOA_CLUSTER >> SOA_SERVER1.
I am starting servers through cammand prompt. In cammand prompt i see above error.
How can i correct the above error ?
Thanks in advance,
ManoharChange the multicast address: http://docs.oracle.com/cd/E21764_01/apirefs.1111/e13952/pagehelp/Corecoreclusterclusterconfigmulticasttitle.html
"The multicast address used by cluster members to communicate with each other.
The valid range is from from 224.0.0.0 to 239.255.255.255. The default value used by WebLogic Server is 239.192.0.0. You should avoid using multicast addresses in the range x.0.0.1
This address should be unique to this cluster and should not be shared by other applications."
Some general information on clusters: http://docs.oracle.com/cd/E21764_01/apirefs.1111/e13952/pagehelp/Corecoreclustercreateclusterpagetitle.html -
My icloud and Apple ID aren't the same email address. My phone wont let me change my icloud email. I don't know the password to my icloud account, and every time I try to email myself the password, it doesn't go through.
Welcome to the Apple Community.
Your Apple ID and iCloud email address don't need to be the same, you can't change an iCloud email address.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you. -
My WLan card and my Bluetooth have both the same MAC address?
Hello dear Arch Forumers.
I've recently purchased a brand new Sony VAIO SVF 14415. I installed Arch in Legacy BIOS mode (I didn't want to deal with the UEFI stuff and I don't use windows anyway, so I erased the complete disk and started from scratch) successfully without any glitches except for the wifi card (broadcom device) and the bluetooth device. For the wireless connection I installed the Broadcom-wl driver from AUR and worked fine, then I went after the bluetooth integration (I'm using KDE). I installed every package in the official repositories to make it work, I also enabled the systemd service for bluetooth management but no luck to get it to work...
Then I tried with CLI tools to see if I could diagnose the problem and I noticed that both my bluetooth and wireless device have the same MAC address (see the image below).
Even though I found something I still don't have a clue about how to proceed to make the bluetooth work. Can someone help me?
Kind Regards!
EDIT: I'm sorry, I just realized the last character is different in both mac addresses but the bluetooth still doesn't work.
Last edited by Silex89 (2014-01-21 20:01:29)If the battery has been completely depleted on the Nano (not really a good idea) then it is going to take 15 to 30 minutes before your computer can see it. Same thing will happen with an iPod Touch.
-
Q10 and Z10 cannot have the same email address??
Hello Everyone!
I have this weird situation going on:
I have purchased a few months ago a Q10 after having a Z10 for a several months.
I have swithched the new Q10 with the phone number that i mostly deal with, and left the Z10 with the second number.
The issue is: I have registered my Gmail email address on the Q10 and everything works ok, as soon as I try to set up the same address on the Z10 the, on the Q10 it stops working and magically it works on the Z10.
How can I solve this thing? Is annoying!
I want both my devices to have the same gmail account running.
Please advise.
GBHi and Welcome to the Community!
If you truly are talking strictly about email (and not, for example, BBID), then that should not happen. I have the same GMail accounts integrated to my Z10 as well as my Q10, with no difficulties. Note however that my Z10 is integrated via ActiveSync and my Q10 is integrated via IMAP, but they both work correctly. I can think of no reason why it does not work for you, and can only consider that you should remove the email account integration from BOTH devices, and re-integrate it again to both and see if a fresh integration will help your situation.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My icloud has been working fine then suddenly it says my password isnt right. I went into setting and now it says that I cant leave the pop incoming field blank but it wont allow me to put anything in. Any suggestions.
Call apple tech support. I had the same kind of issue with my daughters iPhone and they were very helpful
-
My provider's (ATT) modem recently went bad and though I usually use an Airport Extreme connection to the modem I had to start up their new modem via a direct ethernet connection from my computer to the modem. In trying to restart my Airport to modem via ethernet connection I was told that my computer IP and Airport ID are the same and so now my computer will not connect to the Airport. How can I best get out of this situation?
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
OTPC Teams and SVN Repo -- cannot use the same SVN repo for different teams
Can one Subversion repository be used as the versioning repository for two teams?
I recently installed OTPC Server and client.
As the administrator, I created a Rally connection, and a Task connection, and a Subversion connection.
I created a team, and attached the three connections.
All worked fine.
Next I created a second team, attaching the three connections.
In the JDeveloper OTPC client, the Rally and Task connectors work for BOTH teams that I am on.
The subversion connection will not.
In the Team Navigator Panel, under the "Versioning" accordion subpanel, for one team it has a SVN connection, for the other team it says "Create Connection."
When I double-click on it, enter the repository information, and test read access, it says "Access granted."
When I press Okay to close the dialog it says:
"A repository connection with the supplied URL already exists."
Is this an intentional feature that one subversion repository cannot be used on both teams? Or is it a bug? Or is it my error?
Thanks,
Ariethe proxy env is ok in superuser env
➜ ~ git:(master) ✗ export | grep proxy
ftp_proxy=http://proxy.zte.com.cn:80
http_proxy=http://proxy.zte.com.cn:80
https_proxy=http://proxy.zte.com.cn:80
rvm_proxy=''
➜ ~ git:(master) ✗ su
Password:
[root@myhost jinleileiking]# export | grep proxy
declare -x ftp_proxy="http://proxy.zte.com.cn:80"
declare -x http_proxy="http://proxy.zte.com.cn:80"
declare -x https_proxy="http://proxy.zte.com.cn:80" -
Looking up Identical EJB both locally and remotely
prior to posting this request, i have read and
attempted multiple solutions to this problem
suggested in the forums to no avail.
if i have the same EAR, which contains both
an EJB Component and a WAR, deployed to multiple
servers, is it possible to look up an EJB both
locally and remotely?
for instance, on the server performing the lookup,
EJB A is deployed. i successfully look it up
via the following call:
InitialContext context = new InitialContext();
Object ref = context.lookup(name);
return javax.rmi.PortableRemoteObject.narrow("EJBA", EJBAClass.class);
subsequently, i try to lookup the same ejb
on a remote server by performing the following
calls:
Properties environment = new Properties();
environment.put("java.naming.factory.initial", "com.evermind.server.rmi.RMIInitialContextFactory");
environment.put("java.naming.provider.url",
"ormi://remoteserver:23791/application");
environment.put( "java.naming.security.principal", "user");
environment.put( "java.naming.security.credential", "password");
jndiContext = new InitialContext(environment);
Object ref = context.lookup(name);
return javax.rmi.PortableRemoteObject.narrow("EJBA", EJBAClass.class);
however, i either receive an authentican exception, saying "user"
doesnt have access to allication "application", or a null pointer
exception int the RMIInitialContext.
on my local application, i have defined my ejbs in the web.xml
as defined by the spec. the ejb component is marked as remote="false"
in my orion-application.xml as well.
the version of oc4j is 1.0.2.2.1.
any directinon on this would be greatly appreciated.
thanks,
ted riceas a follow up to my own question, using a application
client, outisde of the web application i can
successfully look up my ejbs locally and remotely.
however, from within the web application, i constantly
receive a ClassCastException.
if no one can tell me how to resolve this, could someone
let me know if they have in fact looked up the
same EJB, both deployed locally and remotely, from the
same web application.
thanks,
ted -
I want to use I face between two ipads with the same email address
I have two ipads and special circumstances dictate using the same email address for both is this possible somehow?
Also, See here for,
Using FaceTime
http://support.apple.com/kb/ht4319 -
How to use the same services-config for the local and remote servers.
My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
<services>
<service id="amfphp-flashremoting-service"
class="flex.messaging.services.RemotingService"
messageTypes="flex.messaging.messages.RemotingMessage">
<destination id="amfphp">
<channels>
<channel ref="my-amfphp"/>
</channels>
<properties>
<source>*</source>
</properties>
</destination>
</service>
</services>
<channels>
<channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
</channel-definition>
</channels>
</services-config>
I think the problem is the line
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime . -
Hello.....
I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
This issue is with only three servers in the environment
"Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
The date/time is correct on the server when i checked in the console session of the server
Can see below messages in event logs
Event ID 1014:
"Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
Event ID 1053:
The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Any thoughts ....Hi,
Have you tried to connect these three servers with IP address instead of computer name or DNS name?
Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
For more information please refer to following MS articles:
Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
Cannot connect via Remote Desktop
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
Lawrence
TechNet Community Support -
When you expand to show local and remote sites, in the previous verions of DW, the files type (local or remote) selected when not seeing both, automatically came up on the left. I liked local when I am editing and when I am ready to upload I expand to see both local in remote. Before, the one you had selected, in my case local, was always displayed on the left. Now in CS6 when I have local selected before I expand, the local is on the right and remote on the left. For me that is not correct. I find that having local on the left works best for me like reading, left to right, I want the local on the LEFT so I can put the updated from left to the remote on the right.
-->In DW CS6 how do I get the local to be on the left?Thank you so much! That did it!
-
I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...
the new computer is a Mac.
I see the site on my computer files, but it will not connect with Dreamweaver on this new computer.
can anyone help with this?
thanks,
Margaretno special characters...
see if this gives you any info... -
Help with local and remote site setups
i've always use dreamweaver to point directly to the dev server files and edit them, save them, and run them. i was the only developer for some time but now we have other developers onboard and we started experimenting with using subversion.
i need to understand how i can leverage the local site and remote sites with subversion so that we arent editing the remote files directly. ive played around with the setting and i think i need to GET the files and have it copy to my local site. however i cannot RUN the files since i dont have Coldfusion on my local machine its only on the DEV server. I used to make a change, press F12 to run the file and could see my changes. can anyone point me in the right direction?First, move the styles from the form generator to the <head> of your document. Otherwise there is a possibility browsers could ignore the invalid code.
Then move your form div inside the banner div and set the attribute float:right; in your CSS for the form div. Then you should be good to go.
Maybe you are looking for
-
Problem in creation of system alias for bw system
Hi, I want to create system alias for the bw system system admin->sys Config->system landscape->portal content->my own folder for this folder i created the system object after creation of system object, from property category i select the connector a
-
Can you connect to 2 different time capsules?
I have a time capsule airport extreme at home. It connects to all my devices perfectly. So, I bought one for the church because I'm there about as often as I am at home. I wanted to use my airport to extend my existing wireless network at the chur
-
Problem with attachment saving to db
Hi, I've encountered the following problem when writing a small app. to receive e-mails and subsequently storing them in a database. private void handlePart(Part part) throws IOException, MessagingException { String disposition = part.get
-
Making a button appear on a track
I've searched here and in the manual but I'm not sure I'm searching for the right thing. How can I make a button appear within a stream so the user can link back to a menu? puzzled..... Thanks
-
is it possible to order square prints or any size not offered on the standard Apple prints ordering menu? If not and I crop a photo to square, how can I order it then?