SRP527W - How to open port 491 for Go-Global apps

Hi Guys,
Recently bought a Go-Global to a remote which require to open port tcp 491. I'm using SRP527W,  how configure using this devices, I tried using the port forwarding but failed.  Need anyone can help thanks. 

I have the same request, and have tried the steps written in the post online, but the screen options are not what was explained.
Per the instructions with my IP Camera support, here's what I need to do:
======
First thing you will need to do is make sure that in the network settings of your camera that you have entered the correct gateway and DNS information. The default gateway address is going to be the LAN IP address of your router. The primary DNS address is also going to be the LAN ip address of your router. For the secondary DNS address enter the address 4.2.2.2, save these settings in your camera.
The second thing you will need to do is, you will need to log into your router and forward the port your camera is using (the default port is port 80) to the LAN IP address of your camera. This will be done in the port forwarding section of your router. You may need to contact the manufacturer of your router to have them walk you through these steps.
In order to access your camera, you will need to use the WAN (public) IP address that was provided to you by your ISP. As an example, the URL will look like this, HTTP://65.44.139.2 or if you are using a different port number other than 80, you will have to use the URL with the port number. That URL would look exactly like this, HTTP://65.44.139.2:81
======
I've changed the secondary DNS to 4.2.2.2, but I cannot find how to forward the camers's port to the IP address of the camera....I've set 198.268.1.240 as the camera address.
Can you help?
Thanks,
Kent Tunell

Similar Messages

  • How to open port 8000 (outward)

    Can someone please explain how to open port 8000 for streaming Nicecast to my (network) IceCast2 server? Thanks!

    If all you are using is the inbuilt firewall then it shouldn't be blocking outward connections.

  • The access to our new chess hall may be blocked by your local firewall. You would need to reconfigure your firewall to open port 15010 for TCP traffic.

    How do I do the following so I can get into my chess program??
    The access to our new chess hall may be blocked by your
    local firewall. You would need to reconfigure your firewall to open port 15010
    for TCP traffic.

    This is not really Firefox related.
    What you need to do here is to read the firewall manual which usually explains how to create a rule for what you want to do.
    If you're using the Windows XP firewall, see this Microsoft article: http://windows.microsoft.com/en-US/windows-vista/Firewall-frequently-asked-questions

  • Don't know how to open ports

    Hello.
    Could someone please tell me how to open ports on my LinkSys WRV200 Wireless-G VPN Router.
    Thank you.

    Open up internet explorer. On the address bar type the numbers 192.168.1.1 (username is admin, password is admin as well). Go to the Firewall tab. Depending on what kind of port opening you want, you either click on the Port Triggering or Port Forwarding subtab.
    If you are hosting a certain program or application, use port forwarding. If you are just simply trying to use and access it, use port triggering.

  • HT201304 How do I set password for all in app purchases?

    How do I set password for all in app purchases? xx

    In-App purchases cannot be made without entering your iTunes store account password.

  • TS1424 How do i get credit for an iPhone app?

    How do i get credit for an iPhone app that was billed to me? 
    The description even said that the app was free that day.  I downloaded it once and it showed TWO downloads, with the first one FREE and the second one I got billed for. 
    It was only $0.99, but I want to know HOW to get a refund!   It's all hidden somewhere on their website, apparently.
    Tom

    You can contact iTunes support here and explain the situation:
    http://www.apple.com/support/itunes/contact/

  • How to install flash player for the gaming app "raptr"?

    how to install flash player for the gaming app "raptr"?

    Hi,
    If you wants to install flash for any browser just visit http://get.adobe.com/flashplayer/ from that browser and click on "Install Now" button to install flash player for that browser.
    But since i have found that raptr is a standalone game so raptr support team would be the right contact who can guide you well that which Flash player plugin they are using in their game. And this is what i have found on there support page Raptr wants me to download "Flash for Other Browsers". Where do I get that? : Raptr Support
    You can follow the steps on that link, I hope it will solve your problem.
    -Varun

  • HT4009 Does anyone know how to get a refund for an iPad app purchase?

    Does anyone know how to get a refund for an iPad app purchase?

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • How do I find/search for a particular app or genre of them

    How do I find/search for a particular app or genre of them in Maverick app store...thx for any help...byeGeorge

    Just go to App store and type in what you want in the search box.   Say, apps for word processors, Anti virus apps, Games apps and so on.   You could also go via Google with a similar approach and lastly, the system divides up particular subjects in any event ...  under the term Categories.
    Having said that, the system isn't a mind reader.   It's up to you to refine what you've  been presented with.

  • Total Newbee, How to open ports 5198 and 5199 for Amateur Radio software program

    I am a Amateur Radio operator using a software program called Echo Link which will enable me to talk to other radio operators around the would through repeaters running this software.  I need to open ports 5198 and 5199 in my Airport Time Capsule for this software to work.  How do I open these ports?  They talk about mapping the ports which I don't understand.  Below is a screen shot of an older version of Airport that shows what I want to do.
    I tried to do it but it does not work and I can't change the private IP Address.  Here is a screen shot of what I tried to do below.  Thanks for any help you can provide. 

    It says above 2 relevant and 1 correct answere available .............
    I'm new here so could anyone direct me to these answeres?

  • How to open Ports for App running in VPC

    Trying to open ports for a Windows app that I am running via VPC but the application still shows the port is unreachable.
    So far I have, opened the port in Mac OSX Firewall, opened ports on my D-Link DSL504G router, disabled the Windows firewall (plus opened the ports in case it became enabled).
    Have also redirected the ports to the IP address within VPC Windows and the Mac itself.
    Have run out of ideas as nothing seems to work.
    Regards
    Alan

    Try the following ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): <enter the appropriate UDP port values>
    o Public TCP Port(s): <enter the appropriate TCP port values>
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
    o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • How to open Port 85 & 37777 for NVR

    I recently purchased a security camera system (Q-SEE / QC Series) for my house but the system required to have open ports 85 and 37777 to be able to view the cameras from outside the local network ie: from my computer at work.
    Can someone please help me? I'm not a computer savy and I'm having a hard time to be able to accomplish this task.
    Thank you in advance

    Matt's pointed you in the right direction - ignore the stuff about uPNP, you just need to use AirPort Admin to configure your time capsule - setup port forwarding to forward ports 85 and 37777 to the IP address of your camera.
    Use AirPort Utility to access your Time Capsule. Under the Network tab you have the configuration for the network, including port forwarding options:
    Click the + button to add a port forwaring rule and add the first public port (e.g. 85) and the IP address of the camera on the LAN that it should be forwarded to:
    Here I've created a rule for port 85 - I'm assuming it's using TCP, but if it's using UDP just add the port values into the UDP fields instead (or in addition to). Also set the IP address to your camera's address (which probably isn't 10.0.1.201 as above).
    Rinse and repeat for port 37777

  • How to open ports 119 and 443 in my Mac?

    I've been trying to use the UseNeXT software with my Mac with no success. I called their support and they told me I need to open the ports 119 and 443. I contact Apple support and they told me that is beyond their scope (???).
    Can somebody help me with that? I tried to find it online, but all tutorials that i tried didn't work or are outdated.
    Thanks

    Hi Drew,
    It probably depends on the router as to the method used to open the ports.
    As I have said elsewhere in the thread the first 1024 ports are open in most router to allow things to work Out of the Box such as Mail (110, 25, 567, 569, 995, 996 and many more ) and web Browsing (port 80 mostly but secure site can use 443) FTP (21 and 22) to name some.
    Port Forwarding is one way to open some of the ports for One IP (computer).
    Most routers have  table for doing this and this can be limited as to the number of ports included.
    This Linksys pic shows how to do it for some as it allows groups based on Start and end ports. However it restricts it to one IP
    DMZ is a form of Extreme Port Forwarding that opens all 65535 ports to one IP (Computer)
    In both the above cases other computers (IP addresses) are excluded from using the ports.
    Port Triggering doe allow multiple computers to access the same Port but requires that you know the lead  - Trigger - port involved for each app.
    It is limited by the table size for your particular router.
    Same Router in Trigger ports for iChat 3
    Most router come with UPnP nowadays.
    It is an ON/Off setting that allows the apps on the computer to say which ports are needed and when.
    On some you can reduce the time to live  and the Hop amounts.
    The ports stay open from a period of normally 30 mins after non use.
    This can be changed.
    It also tends to list the number of Hops (the number of devices beyond the UPnP device) that it can be heard.
    My Sky Hub
    I have no other router on my network but I do sometimes use Internet Sharing between two computers hence the 2 Hops.
    Every other device is only one Hop away from the the router.
    There are concerns that the "Advertisement" is seen upstream (internet side) as well as device downstream.
    The Concern is that this could be Up to your ISP and then down to the "next" IP end user on the particular router/server at the ISP end.
    I have seen no evidence of this being the case.
    Hope this helps.
    8:45 pm      Monday; May 5, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • TS2972 How do you port forward for Home Sharing ?

    I want to home share with my apple tv and it's not working, so i think i need to port forward for home sharing on my apple tv. But i dont know how to port forward :S

    I use an application called port map. http://www.codingmonkeys.de/portmap/  Make sure you download the landlubbers version. When you open it add a port called minecraft with the port 25565

  • How to open ports? BEFW11S4

    I have to open up some ports.
    My router is a BEFW11S4
    I have a cable system, and the cable company tells me that when they ping I average around 6mbs .
    Some of the files I have downloaded require addiontian ports to be open.
    How do I do that.
    thanks
    BATA

    Point your browser to http://192.168.1.1/ leave the username empty and enter the password for your router configuration. Then look for the port forwarding tab. Configure port forwardings for all ports you require to the LAN IP address of the computer to which the ports should go.

Maybe you are looking for