[SRP527w] NAT Traversal not available in VPN options!!!
Hi,
I'm so disappointed to find such a light and incomplete VPN menu on the SRP527w.
As a Cisco certified network engineer, I'm testing it because my company needs about twenty ADSL+ 3G Backup router, and Cisco seemed to offer the best solution.
We need to build a VPN over 3G if the ADSL link fails. Unfortunately, 3G acces in France are routed through a wide private network before reaching the Internet. That's not a matter for one of our Zyxel routers, wich include the NAT Traversal (or NAT-T) feature. But with this Cisco, it's impossible to make the traffic go through the VPN.
Please tell me that this feature will be included in the next firmware release!
Regards,
Gaultier
Thank you for your lightning-fast answer!
I downloaded the MR3 RC release, and... it works fine! My VPN is established over 3G.
Thank you for the great job you did improving the capabilities of the SRP520... Hope there are much more useful features like that on your roadmap!
Regards,
Gaultier.
Similar Messages
-
Question: Singapore and Malaysia not available as an option in First Implementation
Hi,
I am going through the available countries during the editing of the project scope in First Implementations and can't find Singapore and Malaysia as options in the list. Please help.
Thank you.
LiewThe SAP Cloud for Customer user interface is available in the following languages:
AR — Arabic
Note: Functional limitations for this language are described below.
CS — Czech
DA — Danish
DE — German
EN — English
ES — Spanish
FI — Finnish
FR — French
HE — Hebrew
Note: Functional limitations for this language are described below.
HU — Hungarian
IT — Italian
JA — Japanese
KO — Korean
NL — Dutch
NO — Norwegian
PL — Polish
PT — Portuguese
RU — Russian
SK — Slovak
SV — Swedish
TH — Thai
TR — Turkish
ZH — Simplified Chinese
Note
Because Arabic script and the Hebrew alphabet are written from right to left, the following functional limitations currently apply to the support of these languages on the user interface.
SAP Cloud for Sales
Right-to-left (RTL) languages currently are not supported for e-mail integration, analytics or maps. Moreover, the activity timeline, the deal finder, the influencer map, marketing attributes and document flow are only supported for left-to-right (LFR) languages.
SAP Cloud for Service
Right-to-left languages are not supported within the agent workspace for viewing the document flow and the creation of response templates. Furthermore, while right-to-left languages are supported by Adobe PDF output forms, translated examples are not provided. Lastly, the use of the SAP Cloud for Customer Add-In for Microsoft Outlook® is not supported for right-to-left languages in SAP Cloud for Service.
SAP Cloud for Customer for iPad® app
Right-to-left languages are supported in online and offline mode alike, but currently are not supported for contextual help, sales quote previews, the navigation bar, maps, or the analytics dashboard.
SAP Cloud for Industries
Right-to-left languages currently are not supported for SAP Cloud for Customer industries solutions.
Thank you. -
What can I do to unlock the IPAD if I cannot access the device by using computer? When I connect to computer, it says I have to unlock the IPad to connect to itunes.
I try everything but I cannot figure out what to do. I turn off IPAD and it still stay in the connect to Itunes mode. It does not goes back to wait mode.
Any suggestion would be appreciated.
Thanks,
BillHow can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi everyone, I recently got a 8830 and wanted to find out how to temporarily disable email push. The most common answer is to toggle the "Send Email to Handheld" option to "No". For some reason I don't have this option...can anyone help? I am with Bell in Ontario. Thanks in advance.
That option is on your BIS account.
https://bis.na.blackberry.com/html?brand=bell
Otherwise, on your handheld, you can go to Manage Connections and disable the Mobile Network.
Upon re-enabling that option, you will get a flood of the emails you have not received while off the network.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Urgent!!!!!! Mac os and recovery option not available in boot option
Hello all,
I installed windows 8 pro in my Mac using boot camp. It worked fine. I made my boot priority to windows. Then one day I shrinked my windows partition drive to another drive. Then I extended back to normal. But when I restated my pc, it won't load to windows. And when I press the option key, only "windows"partition appear. No "Mac os " no "recovery" only "windows" option. I tried to open terminal using command+s but no luck how can I boot to Mac?
Waiting for it to be solved..
ThanksYou can't do that, Re-Partition the drive, Shrink/Expand, or anything after you install Windows. you have FUBARed the complete system.
You'll need to boot to the Online Internet Recovery system. At startup hold down the Command+r keys until you see a spinning globe in the center of the screen, have the system WIRED to your internet Router, Ethernet cable.
If the Command+r keys don't work try Command+Option/Alt+r keys. Again hold them down until you see a spinning globe in the center of the screen.
Form that you will need to Re-Partition the drive as ONE (1) Partition and then reinstall Mac OS X. Once that is done then you will need to Reinstall Windows and then all your programs for both OSs and hopefully you have a backup of all your data files.'
Good Luck and Best Wishes. Happy Holiday and Happy Festivus for the rest of us. -
Jpeg A is not available in format options for redering
Hello everybody , I am using AF CS3 running in a new iMac with the new OS snow leopard, I also have the quicktime pro with all codec and I am trying to render my work. I would like to do that using the compression type Jpeg A. Unfortunately when I go in the render window, to format options and click in compression type, it is missing a lot compressions including the Jpeg A. I was wondering if somebody know how can I fix my problem?? I already had this problem before in another computer. I have fixed that going into the system preferences, in the quicktime icon and allowed it to use the previous codecs. This time there is no quicktime icon in the system preferences!! Does anybody can help me???
I just tested it on a MacBook Pro running OS 10.6.3 and QT Pro 7.6.6 and it worked fine.
To confirm the process:
open terminal window
enter the text
qtdefaults write LegacyCodecsEnabled yes
and press enter/return
Screenshot attached:
Notice the system responds with "Legacy encoders have been enabled".
What happens when you enter the text? -
Wifi is not available in network options. How do I connect to wifi?
when I go to network there is no wifi in the list, Bluetooth is here but no wifi. So how do I connect to wifi?
When you open System Information from the Apple in the upper left hand corner of the screen and then go to System Report > Network > WiFi, what shows up there?
-
VPN service not available or not responding - Please help!!
For years, I was using VPN AnyConnect without much of a problem. I have an older Gateway 500XL Desktop PC that has functioned well for me since 2004. I have only had to replace the hard drive once. I did upgrade the memory from 512MB to 2 GB recently. I was using Verizon FIOS for my internet connection but recently moved and am now using Cox Communications High Speed service which is doing 5MB per second on the download side. Shortly after the move, I began to develop connection problems with my VPN. I would get the 'service not available' or 'VPN not responding' messages. If I tried to uninstall and then reinstall, the VPN would work again BUT once I disconnected, I would get the above referenced messages again if I tried to reconnect. So I would unistall and reinstall every time in order for it to work and then just leave it running all day rather than disconnect. This all started happeing in Oct. and then more recently, it would magically start reconnecting again without me having to reinstall it so I was happy the problem seemed to go away. However, now, within the past week, I could not get it to work at all, even after reinstalling! So, I am completely out of options. I need to have this up and running again very soon for work reasons.
Since Oct., I have tried multiple things. Initially, the router that Cox gave me was bad after the guy installed it incorrectly (without me realizing it) and it became faulty. Got a new router, but that did not change the VPN problem. I have McAfree Anti-Virus. I tried uninstalling it to see if it was conflicting somewhere but that changed nothing for the VPN. I downloaded malwarebytes and ran scans with that and McAfree full scans but did not have any malware or problems on the PC. I tried to check the PC disk for errors and came up empty there. Cleaned out caches and all that with no change. When I look at the network connections panel on my PC, I can see the AnyConnect link is set up but it will say 'disabled'. When I try to 'enable' it, it will not allow it (a message window pops up but I forget what it says). WHY? I think this is the problem. Is there something corrupted with my PC's ability to establish network connections? Is this something that can be fixed? I know the PC is older and XP will not be supported any longer but none of this make sense. If I could previously connect after installing but ONLY the first time connecting, something is happening to break the network connection on my PC but I have no idea. I tried using the windows network connections troubleshooting tool but came up empty there.For years, I was using VPN AnyConnect without much of a problem. I have an older Gateway 500XL Desktop PC that has functioned well for me since 2004. I have only had to replace the hard drive once. I did upgrade the memory from 512MB to 2 GB recently. I was using Verizon FIOS for my internet connection but recently moved and am now using Cox Communications High Speed service which is doing 5MB per second on the download side. Shortly after the move, I began to develop connection problems with my VPN. I would get the 'service not available' or 'VPN not responding' messages. If I tried to uninstall and then reinstall, the VPN would work again BUT once I disconnected, I would get the above referenced messages again if I tried to reconnect. So I would unistall and reinstall every time in order for it to work and then just leave it running all day rather than disconnect. This all started happeing in Oct. and then more recently, it would magically start reconnecting again without me having to reinstall it so I was happy the problem seemed to go away. However, now, within the past week, I could not get it to work at all, even after reinstalling! So, I am completely out of options. I need to have this up and running again very soon for work reasons.
Since Oct., I have tried multiple things. Initially, the router that Cox gave me was bad after the guy installed it incorrectly (without me realizing it) and it became faulty. Got a new router, but that did not change the VPN problem. I have McAfree Anti-Virus. I tried uninstalling it to see if it was conflicting somewhere but that changed nothing for the VPN. I downloaded malwarebytes and ran scans with that and McAfree full scans but did not have any malware or problems on the PC. I tried to check the PC disk for errors and came up empty there. Cleaned out caches and all that with no change. When I look at the network connections panel on my PC, I can see the AnyConnect link is set up but it will say 'disabled'. When I try to 'enable' it, it will not allow it (a message window pops up but I forget what it says). WHY? I think this is the problem. Is there something corrupted with my PC's ability to establish network connections? Is this something that can be fixed? I know the PC is older and XP will not be supported any longer but none of this make sense. If I could previously connect after installing but ONLY the first time connecting, something is happening to break the network connection on my PC but I have no idea. I tried using the windows network connections troubleshooting tool but came up empty there. -
Iphoto library not available as screensaver
I want my computer to show my pictures from the iPhoto library, as the screensaver. I always had that but now in Mountain Lion the iPhoto library is not available as an option to select. I do have the possibility to select my PhotoBooth picture, but I want my iPhoto Library. Anyone have the same issue and, more importatn, does anyone know how to fix this?
you can choose to use your iphoto library pics by going into system prefs/desktop & screensaver
click on screensaver and make sure you choose a screen saver option that uses pictures (such as floating, snapshots, etc)
now next to source option hit the drop down and your iphoto library should be an option to choose
once you choose iphoto library it will further give you options to use specific event pics etc.
the following article also talks about screensavers in mt lion:
http://support.apple.com/kb/PH3780 -
Results from another Query - not available
HI,
My environment is Business Objects XI 3.1 SP2 Edge series , i have below quereis with web Intelligence Reports
1. not available the functions/options Results from another Query(Any) or Results from another Query(ALL) at Query Level.
2. not getting list of Values for pronpt until i refresh values for prompt?
Please suggest me is there any fix packs available for the same to availle that functionality.
Best Regards,
Reddeppa Knot getting list of Values for pronpt until i refresh values for prompt?
There is option called "Automatic refresh before use" for the object properties available in the universe designer.
Please check the box for the object you are using for populating the list of values and export the universe.
not available the functions/options Results from another Query(Any) or Results from another Query(ALL) at Query Level.
There is a limitation for the query on query functionality that the both the queries can-not be from the OLAP universe.
I guess the query which needs to be filtered should be built on universe from the relational data base.
Regards,
Rohit -
Mexico Country code is not available in CallerID r...
While registering Caller ID feature, Mexico Country Code is not available as an option.
How will the Mexicans register their number in Caller ID.?Try change the DNS server to 8.8.8.8 in the wifi settings.
And use another country. -
Music sync not available in iTunes 10.5 preferences
I have upgraded to iTunes 10.5, upgraded my iPhone to iOS 5, updated OS-X to 10.7.2, updated iPhoto to latest version, enabled sync of everything in OS-X iCloud settings.
BUT, in the iTunes preferences, under store, Music is not available as an option to syncronize, only programs and books as earlier.
The Apple guides state that Music should be there.
What can be wrong? any other having this problem?
I want all my bought music to be available on all my devices...hey henke,
I , too , was wondering why the most important service that I was waiting for , was not available.... the check box for "music" does not appear.
It turns out that this service is ONLY available to users that have an AMERICAN iTunes account....
sadly , apple dons't say that and in the web site it seems that this sync service for music is availale for all.
I guess amd hope it will come to Europe soon. i myself have a German account in itunes
pete -
MSI GTX 560Ti Hawk SLI not available
I have 2 MSI GTX 560Ti Hawk and when I go into Nvidia control panel SLI is not available as an option.
Both cards are visible and working properly in both the Device manager and the Nvidia control panel and the bridge is installed between the cards.
I am using Nvidia driver 285.62 which I have completely removed and reinstalled to try and solve the problem.
The only strange thing I noticed when installing the cards is that there is a small switch next to the SLI bridge that is marked Performance and Silent. When I opened the boxes one card had the switch was set to performance and the other was set to silent. Looking on the net I found that this was how aggressive the fan control was so I set them both to silent. After running into the problem of no SLI I also tried shutting down the machine and moving both switches to Performance but this didn't fix the issue.
Motherboard is a MSI Z68A-GD65 and Live update 5 says its up to date.
Any pointer on where to look would be appreciated.K problem sort of solved. I installed an old nvidia driver 270.61 and it works perfectly. Guess I'll just use the old drive until a game is giving me major issues and then see if a new drive is safe.
-
VPN and iManager - not displaying VPN options?
Hi,
We just installed BorderManager v3.9 SP1 (upgrade from BM 3.7) and are running iManager 3.6
In iManager v3.6 we can see and configure Access Rules, Proxy, etc but the VPN option does not list up.
Could someone post how to get VPN listed in iManager successfully. Under Installed Novell Plug-in Modules it shows as an installed module but never shows in our Roles and Tasks despite logging in as admin and it being the owner.
Thanks,
Dale.Craig,
That didn't work on that server but now using iManager successfully off another Netware server with BM Plug-ins.
We have configured the BorderManager server for Client to Site with all setting as per your book, opened the ports required on the firewall device (NAT happening here to), have public IP natting to private ip of server on firewall and have setup VPN Client on external workstation.
When we try to VPN Login it seems to find the server as the VPN status server says Authenticating user but after about 1 min we get "Failed receiving server DH public value". We have double-checked the we have Allow NMAS Authentication and "Logged".
Any ideas what could be wrong here and what we can check?
Cheers,
Dale.
Kind Regards,
Dale Bentley
Network Help
>>> Craig Johnson<[email protected]> 24/07/2008 3:46 am >>>
In article <[email protected]>, Dale wrote:
> Would like to fix this rather than using iMan on Windows - customer request. If the plug-in shows
installed why would it require a reinstall?
>
Because something is broken, and a reinstall (of the plugin) might be the easiest way to fix it?
Have a look at the logger screen when trying a reinstall of the plugin. You might also want to uninstall
it first.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com *** -
RV016 V3 vs RV082 V3 VPN Tunnel Backup not available on RV016
VPN tunnel backup is not available on the RV016 firmware version 4.0.2.08 (it IS on the RV082. The data sheet and the manual for the RV016 is wrong. I have purchased several RV016 hardware V3 and several RV082 hardware V3. Both have the same current firmware version. We have noted that the RV016 does not have the VPN tunnel failover option found in the RV082. It also does not have split DNS (noted in the manual. A I would have thought that the firmware would provide equal options on the RV042, RV082, and RV016. Good job, Cisco!
We did not have VPN back up with the V1 RV016, either. Also tried V2 and at the time it was not working. The product that we have found works as expected is the Peplink Balance. There is still a few second delay on failover, but if you have two broadband connections, it is imperceptible. We gave up on the Cisco products.
Maybe you are looking for
-
How do I move itunes library from my ipad back to my itunes library in my windows computer ?
How do I move itunes library from my ipad back to my itunes library in my windows computer ? All the songs got transfered by mistake from my windows itunes library to my ipad. All i had wanted to do was to move a select # of songs newly purchased fro
-
Single users getting Dimension must defined once error in Smartview
I have a user that is refreshing a Smartview sheet in Excel "Formula Driven" when they refresh they get a message - Error in Grid XML each dimension must be used once and only once - and per the connection info at the bottom of the worksheet prior to
-
What Is That Song On Miranda July's Final Cut Studio Movie?
at the beginning. =)
-
Itunes is saying my music is downloaded but ipod is saying no content
I have purchased several albums on Itunes and it tells me that music has downloaded but my ipod says no content. I purchased the ipod 2nd hand. Any suggestions would be greatly appreciated. Thanks
-
MSI TI4800SE supported resolutions.
I have a MSI TI4800SE and my old monitor died recently, and I have been thinking about getting a widescreen monitor to replace the old one. All the ones I have seen have a warning stating to make sure your card can support the resolution(1440x900 or