SRP547W Voice User# Speed Dial Settings - Access?

How is the Voice>User>Speed Dial Settings number accessed from a phone keyboard?
Is the field in the settings page a dial plan string?
Unlike the Selective Call Forward Settings entires, this field seems to only accept a phone number or URL.
As such, I'm not sure how to access it from the phone keyboard.

Hi Gary,
Once configured, you should just have to press n then # - where n is the speed dial index (2 - 9).
Regards,
Andy

Similar Messages

How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone. I find nothing in the phone or in the manuals on how to set up speed dial.

How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone. I find nothing in the manual or online about speed dial.

BToddP, I completely understand wanting to customize your phone the way you once had it on your old phone. Fear no longer, help has arrived! Please review this link for additional assistance: http://spr.ly/6588AEzw Let us know if you need any further assistance. Thanks!
KristieQ_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Nokia XL speed dial settings: no possibility to se...

If I set a number on the speed dial settings it is obvious that I will call the contact always using a specific sim.
why not have the possibility to set the sim to use.

Hi, navio1973. This can be done. You can select which SIM card to use whenever you call or send text messages. To enable this, go to Settings > Phone > Dual SIM > Calls and messages > Always ask. If you prefer to use your SIM 2, you can also set it by selecting SIM 2. Hope this helps.

Nokia 6500 slide speed dial settings

Does anyone know how to change the numbers for the speed dials 1 & 2
number 1 is voice mail but is the wrong number and 2 is video calling which i dont want
Thanks

Found the answer elsewhere:
Follow the steps :-
>Menu
>Messaging
>Voice Messages
>Voice Mailbox NO.(CHange it)

I want to use the speed dial extension when I start firefox. I have the option checked in speed dial settings but firefox does not open to the speed dial. How do I get this to work?

I want firefox to open up to the speed dial add-on so I can use it as my start page. In the speed dial options I have checked the option to start firefox in the speed dial but when I open firefox it doesn't open the speed dial.

Sorry, I don't use that add-on, and I don't see a SpeedDial support forum listed on the download page. <br />
Here is the SpeedDial homepage. <br />
http://speeddial.uworks.net/
http://speeddial.uworks.net/manual.html

I have recently needed to reimage my computer. As a result I needed to reload Firefoix. I backed up the "Mozilla Firefox" and "Profile" folders but don't know how to recover my speed dial settings. Can anyone help?

I have downloaded the speed dial add-on and placed the previously mentioned folders in the proper directory.

See Recover your iTunes library from your iPod or iOS device, there are useful links in there even if you don't have a device.
tt2

I can no longer Dial my speed dial numbers by bluetooth after GB update....HELP

I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.
Motorola Droid X now with Gingerbread updated OTA
Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
Help

Adam819 wrote:
I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.
Motorola Droid X now with Gingerbread updated OTA
Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
Help
Food for thought: There is actually information released by the NTSB that even using "hands free" devices while driving have been proven to distract drivers.
As for the Bluetooth commands: I've never used "speed dial" I usually say "Call Nicole Mobile" and it will connect still with no problems.
I just tried to use the voice command "call speed dial 1" and it did not recognize it. It appears you must use the name now.

Need help with speed dial on Continuum

I've read the book which isn't very helpful for a new user. Can anyone help me set up speed dial on the Continuum?

Hi jackiejunque,
Welcome to the wonderful world of Smartphones! We do offer in-store or online Smartphone Workshops to help customers get acclimated with their devices. Additionally, here are the steps on how to add or remove speed dials:
Add Speed dial
From the main screen tap Phone
Tap Menu
Tap Speed dial settings
Remove Speed dial
From the main screen tap Phone
Tap Menu
Tap Speed dial settings
Tap Menu
Tap Remove
Select the contact to remove from speed dials and press the "Red X" icon to remove
I hope this information is helpful as you begin to explore your new device. Please let me know if you have any additional questions.
Thank you,

How to speed dial a number when accessing att voice mail

When I dial voice mail for my land line, it first asks for a password, then the phone number. Is there a way to speed dial a number like this?

Not that I'm aware of.

Speed dial access

I have a 8310 curve and I have put speed dials a-i on my phone, but how do I access them? Ex: I hit the "a" button for my hubby and then then green call button, but it says invalid because it comes up as an asterik. Any ideas for quick access or how to even use it?
Solved!
Go to Solution.

For example if you set the N for a contact, and you want to call that person, press the N key for 3 or 4 seconds, and the device made the call.
There are 3 letters you can't use as speed dial. A, Q, W,
With the A you can lock the device
With the Q you can change the device to vibrate only
With the W you can call the voicemail.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Capture incoming phone # to contacts? Voice commands? Speed dial?

How do I capture an incoming phone call to my contacts? Is there any way to dial by voice commands? On my old phone I could press and hold a number to speed dial, is Favorites the only way to do this on the iPhone? Any help would be appreciated

once you have a call in your call log (recents) press the blue arrow to the right of the number and you will see two buttons 1. create new contact 2. add to existing contact
no voice dialing
favorites is the only way to speedial, i think its faster than the traditional method just double click the home button and you are taken directly to favorites then just one touch and 'viola' phone call
good luck

Speed dialing in the digital voice system

I am having difficulty in setting up speed dialing in the digital voice system. I have followed Verizon directions, have spoken to numerous tech people, but once I program the speed dial codes and phone numbers, the system does not retain them in memory. When I enter the two digit code associated with the phone, I just get a dial tone. Help!!

you doing *75 or *74

Since upgrading to 5.0 I have not been able to access the firefox version of speed dial, what happend to this?

On 5.0, what happened to the foxdial (similar to speed dial addon)?

The player works for me in Firefox 3.6.26 on Linux, but not in current Firefox releases and in Google Chrome.
Weird. It works in Firefox 10 if I run the object code in a new tab. This also works in Google Chrome.
<pre><nowiki>data:text/html;charset=utf-8,<object data="http://media-player.cdn.level3.net/flash/v1_1_1/Level3MediaPlayer.swf" id="L3MP" type="application/x-shockwave-flash" height="382" width="640"><param value="transparent" name="wmode"><param value="true" name="allowfullscreen"><param value="HaloColor=0x0086db&ToolTips=true&AutoPlay=true&VolumeLevel=50&CaptionURL=Old Faithful Geyser Live!&Title=Eyes on Yellowstone Made possible by Canon USA through a generous grant to the Yellowstone Park Foundation&Logo=&SRC=rtmp://npsaflivefs.fplive.net/npsaflive-live//stream50&BufferTime=5&AutoHideControls=false&IsLive=true" name="flashvars"></object></nowiki></pre>

Speed dials

Hi all experts.
I have 2 questions kindly take time to answer them
1) All of you know, how we configure speed dials in mobile phones. We configure them on normal keypad, press the key 2 (for example) for few seconds, and the speed dial number gets dialed. Can we do the same in CUCM7.x or 8.x ?
2) With reference to the above question, what approach should i take to find the answer on my own ?, i downloaded cucm 7.0 administration guide and feature guide, but it hasnt shown how to configure speed dials :-(, how do you guys search for a specific feature ?
Thanks

I am going to assume by "mobile phones" you mean the 7921G or 7925G. Speed dials are a feature of that model and a referenced in the phone's documentation, not UCM. Cisco UCM has no feature called speed dials which is why you cannot find documentation on it. The closest that UCM comes is the speed dial line button type. The UCM-level features that are equivalent are :
Abbreviated dialing. You press a one- or two-digit index number representing the number you want to dial and then the AbbrDial soft key. This is a per-device setting (i.e. not global). These are configured by the user on the device using /ccmuser or the adminstrator by assigning a Speed Dial line button type to a device. If assigned to a free button it will act as a one-button speed dial. If you associate it beyond the available buttons, the index number shown to the left becomes its Abbreviated Dialing index.
Fast dials. These are Personal Address Book entries that you have configured as a fast dial through /ccmuser. They are accessed and dialed through the Personal Address Book service. These are per-user settings.
Translation patterns. Many other PBX systems have an explicit concept called Speed Dials that are globally available to all users. UCM doesn't bother with that feature because Translation Patterns can do that instead. Cisco just doesn't point this out very well. You can create a translation pattern that translates FROM anything TO anything. For example: *411 translates to +16085532447.

Unable to Edit Number Locked In Speed Dial Position

All my Speed Dial listings were ported over to a new 8900 from an 8300. I also changed carriers. Coincidentally, I had my old carrier's voice mail access number programmed into the "W" position in the Speed Dial list on the 8300. That number is now in the "W" position on the 8900, which is the default position for the voice mail access number on the 8900. I am unable to delete the old number so I can enter my new carrier's voice mail access number. There is no EDIT option for that position, but the EDIT option is available for all other numbers in my Speed dial list EXCEPT the position Q, which has a default feature "Change Profile to Vibrate." It would be nice to know how to delete that feature, too. Can anyone help?

There are three keys preassigned
A Lock System
Q Change to vibrate
W Voicemail
You can change this ones, but if for any reason you reset the device, the preassigned keys come back
To change this go to phone, press menu, view speed dial list, go to the A (for ex), press enter, and choose the contact you want.
Remember to create a new contact called Voicemail or something like that to change the Voicemail Key.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

SRP547W Voice User# Speed Dial Settings - Access?

Similar Messages

Maybe you are looking for