Srs premium sound cannot find .startup file

will not start at all but sound is working
Hp pavilion g7-1260us Notebook
windows 7 home premium

Hi,
No it won't effect any of your files etc. Recovery Manager can be used to reinstall the operating system, but the process described in the link on my previous post is just for reinstalling specific software or drivers.
If your at all concerned about using Recovery Manager for this, you could instead try downloading and installing the IDT Audio codec from the link below. Either method is fine.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55026.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Beats Audio cannot find startup file (HP Omni 220)

When I try to access Beats Audio, I receive an error message stating that the startup file cannot be found.
Product name: HP Omni 220-1020a
OS: Windows 7 64-bit
This question was solved.
View Solution.

Hi,
Try using Recovery Manager to reinstall the IDT High Definition Audio driver ( this will also re-install the Beats Audio interface ) - details on using Recovery Manager to reinstall software and drivers can be found on the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01868333&tmp_task=solveCategory&cc=us&dlc=en&lc...
After the re-installation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Beats audio "cannot find .startup file"

HP Pavillion Notebook dv6
windows 7 home premium
I have tried the windows recovery step without any luck and downloading the drivers and beats software with the same results. there is no sound coming out from my speakers either, when i try to test to sound it says "failed to play the testtone" ( my own translation from swedish). but the test is succesfull when testing the earplugs.
thanks in advance

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, download and reinstall the Chipset drivers on the following link.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55095.exe
Whn the Chipset driver reinstallation has completed, shutdown the notebook.
Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it may well automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Startup error: ldaprealm.properties (The system cannot find the file specified)

Hello,
I'm starting WebLogic from JBuilder 3.5; before using the LDAP realm
everything worked fine.
After adding the following entry to the weblogic.properties file
weblogic.security.realmClass=weblogic.security.ldaprealm.LDAPRealm
the WLS states following error message:
java.io.FileNotFoundException: ldaprealm.properties (The system cannot
find the file specified)
The ldaprealm.properties file is located in the WL_HOME dir (same location
as weblogic.properties)
I've start WLS with -Duser.dir=c:\weblogic, but it didn't affect my problem.
When starting WLS with startWebLogic.cmd, everything works fine but no
practicalbe for me,
because I've to start in form JBuilder in order to enable remote debugging.
Thanx for your help in advance,
Michael

http://www.bea.com/support/askbea/wls/S-06632.shtml
ldaprealm.properties has to be in %WinDir%\System32 to be picked up by a WLS 5.1 server run as a service and LDAPRealm enabled.
Still getting interesting LDAP errors, but the file is being picked up on startup.

I cannot open Beats Audio. Get a, "Can not find startup file" message

I have an HP Touchsmart 320-1030 desktop w Windows 7 32-bit and cannot open Beats Audio. When I go to control panel and click on the beats icon I get a, "Can not find startup file" message

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
```````````````````````````````````````
If still no resolution, enter BIOS setup by tapping the F10 key immedaitely after powering on the laptop. Reset to Default settings.Usually done by tapping F9 key,check bottom of screen.Svae & Exit.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Photosmart C4780 install fails at "system cannot find specified file"

My problem started simply with the printer, an HP Photosmart C4780 which has always had a wireless connection and would not print. At first, the network connection checked out fine from the printer control panel. I ran a Microsoft printer troubleshooter, which found a block in the print queue, and cleared it. The first test page would not print, but the "inner test page" did print. I didn't understand whatever that meant, so I looked for help from the HP site.
I ran the HP Print and Scan Doctor, and it suggested I reinstall the driver. I downloaded and saved the current one from HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver. When I attempted to install the new one, a window popped up saying, "The system cannot find the specified file," with only one box to click which said simply "OK". The installation went through to "review installation options", after which came “checking updates, downloading updates, installing updates” and then it was while “checking system” that the “cannot find the file” window popped up, and when I clicked “OK”, the installation window as well as the error message box, just disappeared. What I assume was the file path was in the frame of the window, but the whole thing didn't fit so it didn't show the end. What I could read was “C:\Users\ … \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40 …
I found one topic on the same problem for the same model printer in the forum, which offered this fix:
You will need to first complete a level 3 uninstall of the software. I have included the steps below for this.
1. Press the Windows key, and the letter R
2. Type %temp%, and click OK
3. Open the 7z folder (most recent one if there are multiples)
4. Open the util folder
5. Open the ccc folder
6. Double click on the Uninstall_L3
Once the Uninstall_L3 has completed, please delete all items listed in the temp folder. Note, you will not be able to to delete all items, please skip the ones that you cannot. Next please empty the trash, and perform a clean boot. I have included the document 'How to perform a clean boot in Windows'. If your computer does not request it, please restart your computer.
Once your computer is back up, you will need to reinstall the printers software. You can either do this by using the Installation CD, or downloading the software.
I did what was suggested, until it got to the point where it said it did not recommend removing any further items if I intended on using the HP Officejet printer (yes I have a second HP printer attached to the network) anytime in the future. Not really understanding how this all works, I decided to stop what I was doing, so unfortunately it did not solve my problem.
Do I need to uninstall both HP printers before I can reinstall one? And if I do that, is there any reason I would not be able to reinstall both printers? Sounds like I'm asking for trouble. Bottom line... I still cannot install the driver.
I have tried to install both the full and basic versions of the driver and always get the same result.
I have an HP Pavilion dv6-3100t notebook, running Windows 7 Home Premium, version 6.1.7601 service pack 1, 64 bit. I haven't installed any new hardware or software. This printer has always had a wireless connection. The router I use is a Netgear 54 Mbps WGR614 v6 (supplied by my cable company), and the network includes not only my notebook and the Photosmart printer, but also an ASUS desktop, another HP printer, an Officejet 6300 series (used only for printing graphics and photos with a wired connection to the router), and a Vizio smart-TV. I use Norton 360 Premier Edition and disabled the anti-virus auto-protect when I downloaded and attempted to install the driver.
Please help! And thanks in advance for your time and attention.
This question was solved.
View Solution.

Hi wakey-wakey,
I would recommend accessing your Temp folders, rename a Temp folder to 7zS588E and run the installation from that folder.
Please keep me posted.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Satellite P850 - SRS Premium Sound

Previous to having this Satellite P850, I had the P750 which had the Dolby Advanced Audio installed with also the control center. Included was the "virtual surround sound" which I really liked. Since getting the P850 it has been changed to the SRS Premium sound which I don't like.
I want to know if it is possible to find and install the Dolby Advanced Audio etc which is on the P750, onto the P850 without complications? Would/could the SRS and Dolby run side by side?
Cheers

Hi
The Satellite P750 was equipped with the Harman/Kardon stereo speakers and the software called Toshiba Bass Enhanced Sound System with Dolby Advanced Audio (by Dolby Advanced Audio)
The Satellite P850 was equipped with the Harman/Kardon speakers with slip stream technology enhanced by the software SRS Premium Sound 3D.
Unfortunately the Toshiba Bass Enhanced Sound System with Dolby Advanced Audio software feature was not released for Satellite P850 series and it seems that this software part cannot be downloaded anywhere. Its just a part of the Toshiba image.

The System cannot find the file specified (0x80070002) backing up

HP Pavillion G6, Win 7 Home Premium 64-Bit
When I try to set up Backup, I get the Error message " The system cannot find the file specified (0x80070002)", Using a 160GB External HDD, Tried backing up to DVD Drive.
I have tried tweaking the settings to just backup certain component, I am at a loss now, Really need to back up.
Thanks in advance

Hi,
What program are you using to backup? Are you creating a system image or just some other files.
There is a Blog from the storage team at Microsoft that may have the answer to the issue. It covers common issues and solutions to backup problems.
I recommend using the free or paid version of Paragon Software's Backup & Recovery 2012. It is more reliable than the Windows built in backup program and simpler to use. Free backup programs .
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Data Manger error: the system cannot find the file specified.

Hi,
I am using VPN to connect to MDM repository and get error:
the system cannot find the file specified. Windows sockets error code 2. And forced exit data manager. However I can login the other repository on the MDM server. Can you suggest any way to fix? Thanks!
David

It really does sound as if you are having a problem with ports. If you are able to connect to even one repository, then the problem is not with the Data Manager.
Here is how you can check:
1) Open the MDM Console, and note the port numbers of the loaded repositories.
2) Now open a Command Prompt window and type the following command:
telnet [mdm server] [repository port]
(you can use either the machine name or IP address for mdm server).
For example:
telnet 10.20.30.40 5500
You should get an empty command-type window with no error messages. This indicates success. You can close the window by clicking on the "X". Try this with the one repository which works in the DM, and then with the other repositories.
Let us know the results,
Walter

Error: ldaprealm.properties (The system cannot find the file specified)

Hi,
I'm getting the following error message when starting up WLS
java.io.FileNotFoundException: ldaprealm.properties
(The system cannot find the file specified)
This seems to me as if ldaprealm.properties isn't in the
proper place/dir.
The docu tells me to put it to WL_HOME - and there
it resides.
I cannot start WLS with the startWebLogic.cmd file (which
alway works fine), because I'm forced to do it via JBuilder.
Maybe someone can tell me a property to change the
startup dir (-Duser.dir=c:\weblogic doesn't work)
thanx in advance,
Michael

http://www.bea.com/support/askbea/wls/S-06632.shtml
ldaprealm.properties has to be in %WinDir%\System32 to be picked up by a WLS 5.1 server run as a service and LDAPRealm enabled.
Still getting interesting LDAP errors, but the file is being picked up on startup.

SRS premium sound enhancements not working!!!!!

Two weeks back I installed Windows 8. Now I have Win 7 & Win 8 on dual boot. But SRS premium sound enhancement does not improve the sound quality in windows 8 as it does in windows 7. I mean it does nothing when I slide the audio enhancement slides. The sound is same whether the srs audio enhancement is enabled or not. But the equalizer works fine, only the audio enhancements not working.....my laptop HP G6 1202tx i3 4gb ram 500gb hdd 1gb radeon. Everything is okay in windows 7 but what happened to windows 8?

You could try to install the Windows 7 driver in compatibility mode:
Visit HP Support and get the Windows 7 drivers for the hardware you'd like to try.
Download the driver to your desktop.
Allow the extraction to complete but close the installation process when it comes up.
Navigate to the C:\swsetup\ folder. You will see your driver listed here. They usually have a name like "sp56349". Navigate to this folder.
Within your driver's folder you will see a "setup.exe" file. Right click this file and select Properties.
Navigate to the "Compatibility" tab.
Click the box that says "Run this program in Compatibility mode for..." and also select Windows 7 from the drop down menu.
Check the box which says "Run this program as administrator" at the bottom.
Save these changes and double-click the "setup.exe" to begin the install.
Once the install completes reboot your PC and verify the functionality of the piece of hardware.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

:( :( SRS PREMIUM SOUND

hi i have a hp pavilion g6 1113eo and i installed windows 8 and now my srs premium sound equalizer is gone how do i get it back btw i installed the newest drivers i could find for my IDT high definition codec

i have a hp probook 4540s, i installed windows 8 & now my srs premium sound equilizer is gone . how do i get it back?

I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

If your Mac is new-ish and has one of the Lions as its OS, the drives, cards, USB sticks no longer show up, even though they're there. Go to Finder's Preferences and tick the corresponding items in the General and Sidebar tabs.

Srs premium sound cannot find .startup file

Similar Messages

Maybe you are looking for