SRS-X7 ClearAudio+

Where is the clearaudio+ feature on the SRS-X7? The SRS-X5 has a button on top of the unit, but I don't see it in pictures for the SRS-X7.
I would like to be able to use this device using bluetooth without needing any aditional software, like I can with the SRS-X5. Is that possible?
Thanks

Greetings and thank you for your message. Unfortunately, we are unable to assist customers outside of the US. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
>Joffrey

Similar Messages

Error while runing standard SRS concurrent program

Hi all,
I had written the interface for po_vendor_sites_all.The data is loaded perfectly into interface table AP_SUPPLIER_SITES_INT.
Now while running standard interface program on SRS(Supplier Sites Open Interface Import) .it is giving following error .
Spawned Process 24209
REP-1419: 'beforereport': PL/SQL program aborted.
And it is not showing any reject code or status on back end on table AP_SUPPLIER_SITES_INT. And it is printing IMPORT_REQUEST_ID as request code in the table.now how many times i will run the SRS it is showing in the table AP_SUPPLIER_SITES_INT the MPORT_REQUEST_ID is not changing .
And Can any body suggest good document for writing interface program
Thanks in advance
Goutham
Message was edited by:
goutham konduru

the same situation i am also facing everything almost same .... but just i got diffirent error in request log that is
==========================
==========================
P_WHAT_TO_IMPORT='ALL'
P_COMMIT_SIZE='1000'
P_PRINT_EXCEPTIONS='Y'
P_DEBUG_SWITCH='Y'
P_TRACE_SWITCH='Y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
LOG :
Report: d:\oracle\prodappl\ap\11.5.0\reports\US\APXSSIMP.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
ERR REP-1419: 'beforereport': PL/SQL program aborted.
is anyone got solution and can anybody get me out of this situation
thanks in advance
regards
anwer

Error while runing standard SRS program

Hi all,
I had written the interface for po_vendor_sites_all.The data is loaded perfectly into interface table AP_SUPPLIER_SITES_INT.
Now while running standard interface program on SRS(Supplier Sites Open Interface Import) .it is giving following error .
Spawned Process 24209
REP-1419: 'beforereport': PL/SQL program aborted.
And it is not showing any reject code or status on back end on table AP_SUPPLIER_SITES_INT. And it is printing IMPORT_REQUEST_ID as request code in the table.now how many times i will run the SRS it is showing in the table AP_SUPPLIER_SITES_INT the MPORT_REQUEST_ID is not changing .
Thanks in advance
Goutham

the same situation i am also facing everything almost same .... but just i got diffirent error in request log that is
==========================
==========================
P_WHAT_TO_IMPORT='ALL'
P_COMMIT_SIZE='1000'
P_PRINT_EXCEPTIONS='Y'
P_DEBUG_SWITCH='Y'
P_TRACE_SWITCH='Y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
LOG :
Report: d:\oracle\prodappl\ap\11.5.0\reports\US\APXSSIMP.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
ERR REP-1419: 'beforereport': PL/SQL program aborted.
is anyone got solution and can anybody get me out of this situation
thanks in advance
regards
anwer

GoFunctionKey not working in SAP SRS application

Hi Friends,
I have been working on SAP SRS application which is created in Web Dynpro Java and some ABAP part too.
It 7 dcs.
The main dcs are: isisrsrsgrbcsap.com, isisrsrsgrappsap.com and isisrsrsamsap.com.
ScanView is a view which inside a Web Dynpro Java Component ArticleComp which is inside the dc isisrsrsamsap.com.
The ScanView has 4 buttons:
1> Go button,
2> Cancel button,
3> Overview button
and 4> Advanced Search button.
The ScanView has 5 functionkey for mobile devices:
1> GoFunctionKey,
2> CancelFunctionKey,
3> OverviewFunctionKey,
4> AdvancedSearchFunctionKey
and 5> BarCodeReader.
The GoFunctionKey is not working.
It has keycode PI_MaterialScanFk.Search_Go which gets the value 13 from a RFC.
The onAction event of the function key GoFunctionKey is:
public void onActionScan(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent, java.lang.String scanData )
    //@@begin onActionScan(ServerEvent)
     //wdComponentAPI.getMessageManager().reportSuccess("Scan value: "+scanData);
     wdContext.currentPi_Mat_EanElement().setEan_Upc(scanData);
     wdThis.onActionSearch(wdEvent);
    //@@end
The onActionSearch event for the Go button is onActionSearch :
public void onActionSearch(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionSearch(ServerEvent)
     wdThis.wdGetArticleCompController().scanArticle();
     if (wdThis.wdGetArticleCompController().getSizeMatList()>0) {
          wdContext.nodePi_Mat_Ean().invalidate();
          if (wdThis.wdGetArticleCompController().getSizeMatList()==1)
               wdThis.wdGetArticleCompController().goMaterialResult();
          else
               wdThis.wdFirePlugToDispatcher(INavCodeConstants.NAV_CODE_COPY);
    //@@end
So, internally GoFunctionKey calls the function of the Go button.
But nothing happens when client clicks this Enter button of the mobile device.
I am planning to debug the code by putting some breakpoints but it would not help.
I have already tried to print statements inside the onActionScan by using wdComponentAPI.getMessageManager.reportSuccuess();
but nothing is getting printed as the action is not getting called.
There are some changes done in ABAP side but no customization done in the java side.
Also, the mobile devices used are given below:
http://emobilescan.co.uk/downloads/manuals/ppt8800.pdf
Please show how to approach and solve this issue.
Thanks & Regards
Kaushik Banerjee

Hi,
I have not worked on mobile development but are you sure wdComponentAPI.getMessageManager.reportSuccuess() works on mobile devices.
Also you have called a method of your Comp Controller in onActionSearch. Check if it might be throwing an exception that is not being printed.
Regards,
Himanshu

T.code for check the Total SRS

pls tell me t.code for match the SRS (stock requitions slip)from store or production ?
Thanks
Rekha Sharma

U can check in MB25 or in MB51.

SRS-X7 touch controls no longer working

Hello!
In July 2014, I purchased in Japan the portable sound system SRS-X7. But ever since I updated its firmware to the latest version 2.11.2.06, I lost access to the volume (+ and -) and bluetooth touch controls located at the top of the unit.
I've performed the recommended resets various times (including the hard reset, with the unit attached to my MacBook via ethernet cable), but the problem remains. This seems to be a software issue because, whenever I hard reset the unit, I become able to access the bluetooth touch control in order to perform a new pairing; but then I loose access to it once again.
Until you release a correction it would be useful to downgrade the firmware to the oldest version, but I cannot find it in your support pages.
Since my unit is stil in the warranty period, I would appreciate orientation on how to proceed, if the problem turns out to be a hardware malfunction of my unit.
Thank you!

Greetings and thank you for your message. Unfortunately, we are unable to assist customers outside of the US. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
>Joffrey

Named Pipes provider, error:40 could not open a connection to sql server. Only happens on one of the front end SRS servers

when testing a datasource connection I get the following error.
Named Pipes provider, error:40 could not open a connection to sql server.
I've read all the posts on this and nothing works. This is a scale out deployment and the connection
works from the other server I have setup with SRS that is connected to the same backend SRS databases. It just doesn't work from one of the SRS front ends. I'm at a loss.. please help

Enable both named pipe and TCP communications.
Make sure client is using the same (named) pipe name as server for connection.
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Problem in creating Saved Result Set (SRS) in OBIEE 10.1.3.4

Hi,
We have migrated Siebel Analytincs 7.8.5 to OBIEE 10.1.3.4, and we are now unable to create any SRS from OBIEE though we can create Segment and marketing cache for the segment.
We did the following steps -
1. Unisntall Siebel Analytincs 7.8.5
2. Install OBIEE 10.1.3.4
3. Use MIGRATE tool (sawmigrate) to migrate RPD & WEBCAT
4. We have ALTERed the SRS tables - M_SR_HEADER, M_SR_ACCOUNT (as in OBIEE version there are many new columns have been added)
5. We passed GLOBAL CONSISTENCY in the RPD
6. We followed the steps in the document *"Oracle®Marketing Segmentation Guide Version 10.1.3.4 July 2008"*
7. We created a Saved Result Set Format as instructed in the document - here we are very confused to select the list of columns - we don't know what should be the excat source / format
8. Then we click the SRS create button
9. We got the below error -
Error Codes: QS2QOLYY:GDL67CY9:IHVF6OM7:OPR4ONWY:U9IM8TAC
Error in getting cursor for WorkNode (Id:0)
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
*State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [nQSError: 43001] Authentication failed for Administrator in repository Star: invalid user/password. (08004)*
Can anyone help us to resolve the issue ?
A quick response is much much appreciated.
Many Thanks,
Prasanta

Hi,
It seems like you didnt setup the Administrator user for Saved Result Sets as it mentioned in the Marketing Segmentation Guide.
Here is an extract from the guide:
Setting Up the Web Administrator for Managing Cache and Saved Result Sets
Some queries issued by the segmentation engine require the use of the Execute Physical stored
procedure. These queries include delete statements on the cache, delete statements on the saved
result sets, and insert statements for the cache and saved result set. The Execute Physical stored
procedure must be run by a user with administrator privileges. The administrator user is set up in
the instanceconfig.xml file.
NOTE: The BI Administrator password and login parameters are case sensitive.
To set up the administrative user in the instanceconfig.xml file
1 Open a command shell and navigate to the <OracleBI>/web/bin, where <OracleBI> represents
the root directory of the installation.
2 Execute the following command:
cryptotools credstore -add -infile <OracleBIData>/web/config/credentialstore.xml
3 When prompted, enter the following values:
Credential Alias: admin
Username: Administrator
Password: <enter Admin password here>
Do you want to encrypt the password? y
Passphrase for encryption: <password >
Do you want to write the passphrase to the xml? n
File "<OracleBIData>/web/config/credentialstore.xml" exists. Do you want to overwrite it? y
4 Open the credentialstore.xml file and verify that the following section has been created:
<sawcs:credential type="usernamePassword" alias=“admin">
<sawcs:username> Administrator </sawcs:username>
<sawcs:password>
<xenc:EncryptedData>

SCCM 2012 R2 Install - Reporting Services Point, Remote SRS Server

Hi all,
Here's a brief run down of the setup so far. SCCM 2012 R2 installed on Windows 2012 R2 (SCCM01). SQL 2012 back end is off box, on a separate cluster (SQL01C01). Reporting Services for SQL 2012 is due to be installed on a different server (SRS01).
My question is, when I come to sort out Reporting Services in SCCM, will I simply need to add SRS01 into SCCM as a Site System Server and install the Reporting Services Point onto SRS01?
I realise I could simply wait for the sql guys to sort the install of SRS and then test it myself but it might be a while before that gets done so I thought I'd ask....Thanks for the help

will I simply need to add SRS01 into SCCM as a Site System Server and install the Reporting Services Point onto SRS01?
Correct, although the other way around. Remember you have to make SCCM01$ a local administrator on SRS01.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SMS SRS Reporting Point - 7403 at regular time intervals

Hi,
At regular time intervals I see a 7403 error message in the "SMS_SRS_REPORTING_POINT" component appearing in my ConfigMgr 2012 SP1 environment. SQL Server 2012 is used.
My reports are working fine and accessable via the Console and URL. This error 7403 appears twice a day. The srsrp.log states the following at the moment of the issue:
STATMSG: ID=7403 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=servername SITE=XXX PID=8180 TID=6516 GMTDATE=Tue Aug 27 04:58:18.849 2013 ISTR0="servername" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SRS_REPORTING_POINT 8/27/2013 6:58:18 AM 6516 (0x1974)
Failures reported during periodic health check by the SRS Server servername. SMS_SRS_REPORTING_POINT 8/27/2013 6:58:18 AM 6516 (0x1974)
A few minutes before and after the health check is successful.
I found out that at the moment of my 7403 error, the SQL RS recycle process is started. The log file reportserverservice.log looks like:
06:55:58:: i INFO: Recycling the service from the default domain
The recycle time of SQL Reporting services is configured at 720 minutes, so each 12 hours.
Can someone tell me if this is normal and how I can avoid the 7403 error?
Thanks.
Greets!

Yes I know this is an old post, but I'm trying to clean them up.
Have you see this blog / KB before?
http://myitforum.com/myitforumwp/2011/11/14/fix-configmgr-error-7403-srs-web-service-is-not-running-on-srs-reporting-point-server/
http://www.enhansoft.com/

Configuration Manager 2012 R2 - SRS Reporting Services not configuring Report Server

Hi all,
I am running stand-alone primary site and remote (shared) SQL 2012 SP1 on Windows 2012 R2 Standard. Remote SQL server is currently hosting multiple instances and Configuratoin Manager is running on a custom instance. SCOM databases also co-exist on the same
SQL environment (different instance with SSRS installed & running perfectly).
After setting up the Reporting Services role on Configuration Manager environment, srsrpsetup.log & srsrpMSI.log states installation is successful. However, when monitoring srsrp.log file, we encounter the below message -
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 5232 (0x1470).
SMS_SRS_REPORTING_POINT 02/12/2014
07:44:00 7828 (0x1E94)
This is a SRS Reporting Point Role as SRSRP registry key exists.
SMS_SRS_REPORTING_POINT 02/12/2014 07:44:15
5232 (0x1470)
Waiting for changes for 0 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check state SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check server health. SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Registry change SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:45:15 5232 (0x1470)
Steps taken so far -
1. Switched reporting services to run from local system account to domain account.
2. Created new Report Server database on our instance and reconfigured Reporting Services to this DB.
3. Un-installed and re-installed Reporting Services role in Configuration Manager
4. Un-installed and re-installed SSRS on Configuration Manager (dedicated) SQL instance after removing Reporting Services role in CM12.
I have referred couple of links on forum and none seem to help resolve this issue.
Let me know if there is anything specific I missed out from my end. Appreciate any assistance.
Regards,
mittu

It seems that Reporting Services for SCOM and SCCM cannot co-exist on the same server (it sounds like a bad idea anyway)
http://www.systemcentercentral.com/system-center-2012using-a-common-sql-backend-database-sysctr-scom-scsm/
https://social.technet.microsoft.com/Forums/en-US/7e6b5ae9-04c8-4c5d-a77f-9f5208d4e65f/is-it-possible-to-deploy-2-scom-2012-r2-reporting-in-a-sql-server-which-already-has-scom-reporting?forum=operationsmanagerreporting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/0332b156-bc36-4699-8775-a561915f35ab/scom-2012-reporting-components-with-a-shared-sql-cluster?forum=operationsmanagerdeployment
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Enable SRS Role?

I have CM2012 and SQL 2012 installed in a lab. SQL does have SRS installed and enabled, the SRS service is up and running. In CM2012 I'm trying to add the reporting service point role. I'm on the Reporting Services Point page
and I click Verify and it says "Successfully verified" on my database name. But the Reporting Services server instance is blank and it does not allow me to add anything.
How do I populate the Reporting Services server instance?
mqh7

Hi,
If you start the Reporting Services Configuration Manager under SQL\Configuration Tools, are the Reporting Services point configured? can you use a browser and access
http://servername/reports? otherwise that is most likely the issue.
Here is a guide on how to configure SQL Reporting Services for ConfigMgr
http://prajwaldesai.com/deploying-sccm-2012-part-12-installing-and-configuring-reporting-services-point/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How to stop concurrent programs from appearing in the SRS window ?

Hi All,
We have hundreds of custom concurrent programs registered under a custom application.
Except for 3 hidden programs (which will be submitted internally from another concurrent program), all the others should appear in the SRS window. Therefore, instead of individually registering each program in the request group, we have registered the application itself, in the request group.
However by doing this, the 3 hidden concurrent programs are also appearing in the SRS window. The concurrent program define form doesn’t allow us to uncheck the “show in SRS” checkbox if we have parameters define for a concurrent program.
Is there any way that we can prevent these hidden programs from appearing in the SRS window, in our case?

Hi,
Create a new request group and add all but the 3 programs, using a PL/SQL script calling fnd_program.add_to_group.
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Map Viewer SRS Parameter (WMS service)

Hello,
In MapViewer WMS documentation it is mentioned, that two SRS parameter values are supported: SDO:8307 and EPSG:4326. We try to access WMS server using MapInfo Professional as client, but it reports that SDO:8307 projection is not supported by MapInfo (EPSG:4326 is supported).
So, is it possible to configure MapViewer in such way, that it will return EPSG:4326, not SDO:8307?
Thanks,
Andrejus Baranovskis

Hello,
Coordinate system used with our datasource we have declared in table MDSYS.CS_SRS. It is analog of EPSG:2600, but it is not included in Oracle Spatial standard coordinate systems list.
Response from Oracle WMS:
<Layer queryable="1" opaque="0" noSubsets="0">
<Name>DATA_R</Name>
<Title>DATA_R</Title>
<SRS>SDO:1000002</SRS>
<BoundingBox SRS="SDO:1000002" minx="100000.0" miny="5700000.0" maxx="800000.0" maxy="6700000.0" resx="0.01" resy="0.01" />
<ScaleHint min="10000.0" max="1.0" />
</Layer>
May be we can define SDO:1000002 equivalent in EPSG in Oracle Spatial DB?
MapViewer version: 10.1.2.0.2
Thanks,
Andrejus

Add a new field on SRS (SAP Retail Store)

Hi Experts,
We have a requirement to add a new field on the SRS(SAP Retail Store) screen for Purchase Order.
We identified the template - zwspo_entry/90/saplwspo_docdlg_2000.
We included a new field in the Internet Services => ZWSPO_DOCDLG under TOPIC_90.
Now we can see the field on the web output.
However the corresponding input value which is entered by user is not gettting updated in the structure WSPO_HEAD. So we are unable to save the value entered by user in the PO.
The code is as below :-
<tr>
<TD class="formatlabel" width = 200>
       <label for="STG_LOC">`#_2100_sloc`</label>
    </TD>
    <TD nowrap colspan="5">
         <INPUT id="STG_LOC" TYPE="text" name="WSPO_HEAD-STG_LOC" value="`WSPO_HEAD-STG_LOC`" maxlength="4" size="4" >
         `if (WSRS_RETURN-FIELD == "STG_LOC")`
              <img src="`mimeURL(~service="WOSM", ~name="image/arrl.gif", ~language="")`">
          `end`
    </TD>
   </tr>
STG_LOC is a new field which we have appended to WSPO_HEAD.
We have created a enhancement in include LWSPO_BAPIF02 in subroutine BAPI_CRT_POHEADER_MAP_TO where we get the values of WSPO_HEAD. However for STG_LOC its coming blank though we are entering a value on the web.
Any pointers to resolve this would be extremely helpful.
Thanks,
Best regards,
Prashant

Hi:
Check this link
http://erpgenie.com/index.php?option=com_content&task=category&sectionid=6&id=55&Itemid=77
Regards
Roberto

SRS-X7 ClearAudio+

Similar Messages

Maybe you are looking for