SRSS 4.2 All dtlogin sessions stuck with 26B

Hi All,
I have just installed latest Solaris 10 Jan-13, i am running SRSS 4.2 with SRWC 2.0
everything was working fine for more than two weeks and then suddenly all sessions stuck with 26B
at /var/opt/SUNWut/log/messages is showing fine and all desktop sessions are attached properly
Oct 13 11:34:26 Al-Wusta utauthd: [ID 988051 user.info] Worker7 NOTICE: CONNECT IEEE802.00144fd3923c, pseudo.00144fd3923c, all connections allowed
Oct 13 11:34:26 Al-Wusta utauthd: [ID 118801 user.info] Worker7 NOTICE: MTU = 1500
Oct 13 11:34:26 Al-Wusta utdtsession: [ID 702911 user.info] Add (2,pseudo.00144fd3923c,normal)
Oct 13 11:34:26 Al-Wusta utauthd: [ID 274016 user.info] Worker7 NOTICE: SESSION_OK pseudo.00144fd3923c
But if you read the /var/opt/SUNWut/log/auth_ log file
-bash-3.2# more auth_log
/etc/opt/SUNWut/xmgr/notify: /bin/ps failed for PID 982
/etc/opt/SUNWut/xmgr/notify: /bin/ps failed for PID 982
/etc/opt/SUNWut/xmgr/notify: /bin/ps failed for PID 982
/etc/opt/SUNWut/xmgr/notify: /bin/ps failed for PID 982
/etc/opt/SUNWut/xmgr/notify: /bin/ps failed for PID 982
-bash-3.2#
Any help is highly appreciated...

Hi Khalid,
Are you still just getting 26Bs continuously?
What policy have you configured on the server?
Also, 5.2 is old too, you should be running 5.4.1 if this is a new system.

Similar Messages

  • I have a blackberry and sceen light dont wok and it get hot and turns off and it dont want to down load what can i do it new and i im not happy with it at all but im stuck with it what can i do

    i have a blackberry and im not happy with it at all its gets hot and it burns ur hands and the scern is black and it turns off and dont want to down load i hate is phone and i just got in 3mon ago im now stuck with it

    Hi and Welcome to the Community!
    Given that it's only 3 months old and was brand new, you are covered by warranty. You need to take it to whoever you bought it from as they are the servicer of your warranty.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have iphone 3gs 32 GB attempt to Reset-Erase all settings now stuck with Apple logo

    I have iphone 3gs, i have downloaded free games and apps from app strore installed and it was working fine. i even updated the games a couple of times. Two days ago  I attempt to Reset-Erase all settings & Content of my phone. It was stuck with apple logo. till now. What to do? Now it is stuck there and when I connect it to my PC it does not appear there also.
    It is just charging and chargning only. when i disconnect it shows battery low.
    Help please. Please... Please...............

    Force the phone into recovery mode & restore it:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • SMQ2 - Found a queue with name "*" and all other queues stuck in STOP state

    Hi all,
    We have a problem on the ECC side, on outbound asynchronous proxies. Sometimes a new queue appears on SMQ2 there with name "", and with status "STOP". At this time, all other queues stuck with STOP status... the only way of resetting all those queues to RUNNING state again is to delete the queue named as ""...
    Some of you has any idea how this queue "*" appears there and stop all other queues?
    thanks
    roberti

    Hi Ravi,
    Is not only about one queue stopped... the problem is this queue named ""... with status STOP, all other queues stops too with it. The only way to make things work again is to delete the queue named as ""... the problem is to discover what or who is creating this stupid "*" queue. I think that this is a procedural error on datacenter, but they are saying is not the case... I'm investigating, but if someone else has any idea about I would appreciate
    thanks!
    roberti

  • I followed all the directions to get Norton 360 to work with Firefox 8, but nothing works. I love Firefox, but if my Norton 360 won't work with it I'll be stuck with IE, which I do not like. Please Help Me!

    I followed all the directions to get Firefox 8 to work with my Norton 360, but nothing has worked. Is there anything else I can do? I didn't know there was an issue when I first upgraded to Firefox 8 so didn't choose the Norton plug ins immediately so I uninstalled Firefox hoping to be able to do it correctly when I Downloaded it again. Unfortunately it didn't ask me any thing regarding Norton so I went to Plug ins as directed to Enable Norton 360's plug ins, but none were listed.
    What can I do now? I LOVE Firefox! If we can't make it work I'll be stuck with Internet Explorer which I do not care for at all!
    I need to have Norton Security to protect my computer. Please help me find a solution to this problem ASAP.
    Thank you,
    Susan L Woods
    [email protected]

    Hi Susie, I use Norton 360 and have the latest Firefox 8 installed is working fine for me. Firefox 8 support for [http://community.norton.com/t5/Norton-360/Firefox-8-Support-for-Norton-Toolbar/td-p/581640 Norton Toolbar] was released on Nov 8th. Install the appropriate add-ons based on the version of Norton 360 you're using (see official Norton link above). Hope this helps.

  • HT204120 My iPhone 5s is stuck with 3948 photos (shown on the iTunes storage bar) on and I can not find a way to delete them all! It's very annoying as it takes up 6.54 GB of space and leaves me no room to add films, music...etc on to it. Please help me!!

    My iPhone 5s (16GB) is stuck with 3948 photos (shown on the iTunes storage bar) on and I can not find a way to delete them all! It's very annoying as it takes up 6.54 GB of space and leaves me no room to add films, music...etc on to it. Please help me!!! I have already tried the numerous articles Apple have sent my way and I am still having no luck.I'd be eternally grateful if anyone could find a solution for me as this has been a problem for almost a year. Thank you.

    If they were put there via iTunes sync process, then simply untick the Music box before syncing again.

  • I purchased a text tone from Itunes.  It shows up in my library, but not as a text tone.  Is there a way for me to set it as a text tone for all texts?  Or I am stuck with factory settings?

    I purchased a text tone from Itunes.  It shows up in my library, but not as a text tone.  Is there a way for me to set it as a text tone for all texts?  Or I am stuck with factory settings?

    So it is conseidered a customized text tones even if it was purchased through iTunes?  Confusing.  Since I bought it through itunes as a text tone I assumed it would work.  OOOPS
    Thanks so much

  • I've stuck with Entourage way too long. Now I don't dare install the Mavericks OS because all my Entourage files will go away. And my iMac won't open Mac Mail (probably because I've never opened it in the 5 - 6 years I've owned the Mac.) Any suggestions?

    I've stuck with Entourage way too long. Now I don't dare install the Mavericks OS because all my Entourage files will go away. And my iMac won't open Mac Mail (probably because I've never opened it in the 5 - 6 years I've owned the Mac.) Any suggestions?

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

    I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

    If you didn't back it up, your data is gone. There is no "solution" after the fact.

  • Hi All, I just purchased the iphone 4S, was upgrading my phone with my itunes acct, its stuck with itunes, cable icon...Help.

    Hi All, I just purchased the iphone 4S, was upgrading my phone with my itunes acct, its stuck with itunes, cable icon...Help.

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • New session started with an advertizing page and all my tabs are lost

    New session started with an advertizing page and all my tabs are lost. Restore the previous session is not active. How can I restore my tabs?

    This advice might come too late, but, don't exit Firefox! Or if you already did, don't start it back up again!
    ''If Firefox is running:'' Open your current Firefox settings (AKA Firefox profile) folder using either
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table on the page, click the "Show Folder" button. This should launch a new window listed various files and folders. For best results, change the view to "Details".
    (''If Firefox not running, get to this folder by pasting the following in the Run box on the start menu and pressing Enter: %APPDATA%\Mozilla\Firefox\Profiles and then double-click into the most recently updated semi-randomly-named folder you find there.'')
    In the window that launches, scroll down and double-click into the '''sessionstore-backups''' folder. Save all files here to a safe location, such as your Documents folder, so Firefox doesn't overwrite them. We may be able to use them to recover your lost tabs.
    Also, if you return to the main level of the profile folder, you may find some sessionstore files. Copy those to the safe location as well.
    Could you report back on what you found?
    Note: If Windows hides the .js file extension from you, you can change a setting so that you can see all file extensions (this helps when renaming files). This support article has the steps: http://support.microsoft.com/kb/865219 or http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions
    The kinds of files you may find among your sessionstore-backup files are:
    * recovery.js: the windows and tabs in your currently live Firefox session (or, if Firefox is closed, your last session)
    * recovery.bak: a backup copy of recovery.js
    * previous.js: the windows and tabs in your last Firefox session
    * upgrade.js-''build_id'': the windows and tabs in the Firefox session that was live at the time of your last update

  • Hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim c

    hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim card it says that simcard not recognized. I tried all the solutions in the net but nothing seemed to work. What should I do? I'm located here in the Philippines. I hope you could help. Thanks! 

    I know. I was with my brother when we did this. He didnt clearly understood the question that poped-up. Regarding the simcard, after successfully restoring it on itunes my simcard won't work. I'm not able to send and receive calls and messages.
    hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim c 

  • Could apple send me an iPad air. All my friends are making fun of me because I'm stuck with the old device and no phone. I've had app problems with apple before so I think that it would only be fair to get a newer device. Thank You Apple

    Could apple send me an iPad air. All my friends are making fun of me because I'm stuck with the old device and no phone. I've had app problems with apple before so I think that it would only be fair to get a newer device. Thank You Apple

    First we aren't Apple just normal users just like you.
    Second provide Apple a feedback or send them a mail.
    Third they will never send you a free iPad Air.
    If you want one you have to buy it. (go for refurbished if the device is too expensive) or look for special prices.
    Contact iTunes support if you have a problem with an App.

  • HT1535 This isn't working at all... I follow instructions and it doesn't work.. there's no option in !tunes to add to movies... This is a nightmare, I should have stuck with my PC instead...

    This isn't working, all I need is to add a couple of movies to my Iphone 4s but itunes doesn't seem to have any option to add movies, videos etc.... I should've really just stuck with my PC you guys....  Why do they have to make things so difficult in Apple? really? just to add a **** movie to my Iphone 4s I have to ask for help... This is ridiculous..

    Hi,
    Yes, I know this forum has users like me and it's not Apple. I was only venting and, showing my frustration for Apple. You said if I wanted more help I need to give more info...
    What kind of info? like what kind of Apple computers I have? the specs? etc. I know I need Itunes on a PC as well to add movies to my Iphone 4s but, I also have a Samsung Galaxy S4 and, that phone all I do is Plug it in to my PC and from there on it's really easy because it gives me the option to let my PC see it as a external HDD to where I can litteraly drag my movies that I want into it.. And, boom! I'm done. With Apple is like oh my god, you need this you need that you need the other thing.. Blah Blah Blah LOL.... But, I'm a stubborn bull and I want to add movies to my Iphone 4s. So, what I do is the following, I plug in my iphone 4s to my macbook pro and Itunes launches by itself, then I click on the iphone 4s on the upperr right corner, right after a list appears with all my music, then I click on where it says Movies on the upper left, then I try to drag a movie into the list and there's an error message that appears telling me that the movie wasn't copied to my iphone because it can't be played.... at this point I gave up and here I am asking for help.
    I don't what info you want, I have a iphone 4s, a macbook pro wth OSX Mavericks, 2.6 GHz Intel Core !7 8 GB ram... I also have a Imac which I have put away since we just moved in so, I can't remember the specs but it's about 2 - 3 years older than my macbook pro...  Apple seems easy to use when it comes to graphic design, video editing and, working with audio... When it comes to multimedia, it seems not so great. I hope this is enough info... If not just ask me what you guys would need to know.. Thanks for your help... I appreciate it, hopefully I can master the use of Apple just like PC.

  • HT4623 my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ... i have updated all software on the pc and disabled Norton as the

    my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

Maybe you are looking for

  • How can I put my music from my ipod to my computer with out losing it all

    I just got a new computer and I need to transerfer my music from my ipod to my new computer, but when i tried it almost deleted all my music. I'm not a technological person and I dont have anything to back my ipod up on if I lose all my music. Does a

  • Message from Gateway when sending on arch-general list with Mutt

    Hello, a second issue with Mutt. This only happens when I send or reply ( <L>) to arch general list. I do not know for other arch lists, as I didn't posted, but I do not have this issue with other lists or private mail. When I send the mail, I receiv

  • Accessing Exchange Profile Parameters programatically (using Java/ ABAP)

    Hi All, Exchange Profile parameters can be accessed using the URL http://<server>:<port>/exchangeProfile Does anyone know how to access 'Exchange Profile parameters' programatically. (from java). Code snippet for the same would be of great help. Rega

  • Programmatic horizontal waveformchart legend

    Hello, As you can see in the picture, I itend to use a horizontal graphic legend. I've added the plots as a simple 2d array (multiplot). Whenever I start the VI labview seems to override my settings and reset the legend to vertical alignment. I've tr

  • Need help with reader 11.0.5  can't print

    I can open the file in reader but it just won't print.  No error messages.   Print screen comes up and when I click print it does nothing.   Printer works for all other printing Message was edited by: coryd22