Srss-4.2 (EA2): troubles with new firmware

we see some issues with the srss-4.2 EA2 (4.2_49_2009.08.27.18.08) firmware. during operation, we sometimes get this on our switches:
===
Sep 21 09:08:28.686 CEST: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet9/21, changed state to down
Sep 21 09:08:28.686 CEST: %PM-SP-4-ERR_DISABLE: psecure-violation error detected on Fa9/21, putting Fa9/21 in err-disable state
Sep 21 09:08:28.686 CEST: %PORT_SECURITY-SP-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0000.0000.0015 on port FastEthernet9/21.
.Sep 21 09:08:28.698 CEST: %LINK-3-UPDOWN: Interface FastEthernet9/21, changed state to down
Sep 21 09:08:28.694 CEST: %LINEPROTO-SP-5-UPDOWN: Line protocol on Interface FastEthernet9/21, changed state to down
Sep 21 09:08:28.698 CEST: %LINK-SP-3-UPDOWN: Interface FastEthernet9/21, changed state to down
===
it does not happen often, but it happens (only with the latest FW).
the switch recognizes some other mac addr (0000.0000.0015, in this case) -- as port security is enabled, the port shuts down.
this happens with (receive) flowcontrol enabled and disabled.
niki

I had the same problem, but it has only hapend one time.
(Running OpenSolaris 2009.06 snv_111b X86, with the EA2 release. )

Similar Messages

I am having trouble with a firmware update for my 40ex500 tv. Downloaded update to thumb drive but

Will try again. Am having trouble with a firmware updat for sony 40ex500. Downloaded update to my thumb drive but when inserted in the usb slot on the tv, the sequence to update the tv does not complete. Various service reps have led me to you for resolution. Please advise? Bill Becker

I have a Macbook with Tiger, and OS x 10.4. I had to install a new hard drive.
Run Disk Utility /Applications/Utilities
First, go to your Apple menu then click Software Update...
If no updates are available, check the startup disk using Disk Utility.
Using Disk Utility to verify or repair disks

I am having trouble with new I-Phone 4 battery running down in 5 hrs.? Help.

I am having trouble with new I-Phone 4 battery running down in 5 hrs.? Help.

Do you have alot of apps running in background? Tap home key 2 times and there's a list across screen with icons you can deselect them by hold on one and they wiggle touch the minus button and it will deactivate them untill you use them again. Do you have the phone dim after so many seconds or minutes? Is the screen bright all time? Do you go on the Internet or watch video on phone?
These things can affect the hrs of use.

Nokia N80 with NEW Firmware wont sync with PC Suit...

Hello everyone
i have my Nokia N80 on 02 network
i upgraded the old firmware to the new 4.0623 firmware without any problems at all...
now when i connect to latest version of PC Suite via bluetooth, which used to work fine with the old firmware..
PC Suite says its connected via bluetooth, but when you go to contacts, and then try tp UPDATE them, it just searches for over 15 minutes, and nothing happens..
have done everything i can, and nothing works!
why doesnt it work with new firmware?
even when i try and SYNC the phone with PC suite, it is having none of it! whats going on?

have you tried to syncronise with PC sync to see if the sync overall is in order in PC Suite.
Sometime the PC Sync might work, but the contacts folder sync in Nokia Phone Browser has zillion reasons to be stuck since it is Windwows Explorer inbedded.
By tryibg to use PC Sync you can narrow down the reasons what can go wrong

N95 photo shooting problem with new firmware V11

I have got a problem with photo shooting after upgrading my N95 (Product Code: 0534832) to the new firmware (v11.0.026) via Nokia Software Updater.
Before upgrading the firmware, I can turn off the loud and ugly snapping sound when shooting a photo; all I need to do is to change to Silent Profile (that has Warning tones OFF). But it seems that I can no longer turn that ugly sound off with the new firmware!
Is that a bug? Is there another way I can turn the sound off?

Actually I have 2 N95 phones, one is my GFs, both of them are bought and used in Hong Kong.
The way I test the differences between versions is directly comparing each feature with the two phones, where the one with new firmware has product code #0534832, and the one with old firmware has product code #0548445. Both of them has www.nokia.com.hk printed on the box and manuals, so I assume local law is not an issue.
By the way, I have just discovered that the one with product code #0548445 cannot update via Nokia Software Updater.

Missing tracks with new firmware 2.11

I'm guessing that I can't be the only person on here who has had trouble managing the music on their Zen Touch after upgrading to 2..0, but I can't find any posts that mentions it. IMO the new firmware is terrible in the way it changes the way Mediasource shows the music on your player and even if you use Windows Media Player or the Windows Explorer type utitily the system of folders is rubbish as well.
Has anyone had issues with whole albums missing or ID3 tracks not showing correct information since moving to the latest firmware? When i connect my player to my PC I have a few albums which show on my PC as being on the player but when I'm using the player regularly when I'm out and about the albums are missing.
One other request. Can you guys tell me how you are transferring music to the player now? I would be interested to know if you do it through Mediasource or via copy and paste using explorer? If you do the latter where exactly do you put the music? Do you put it in the music folder under "media", and also do you put the artist folder in there or just dump the albums in there?

I could not believe how much of a **bleep** up the team at Creative had made upon installing the firmware update. Im not at all happy with the fact that it is not reversable either... It really blows ey mate?

WRT54G v6 problems with new firmware

I performed the mandatory firmware update and soon began having problems such as DNS errors when trying to access web pages and no IP address assigned to secured wireless connections using DHCP. I reinstalled the earlier version and all of my problems vanished.
I tried reinstalling the new firmware several times with the same results each time. I ran with a backup D-Link DI-524 until I came up with the idea of rolling back the firmware.
Has anybody else experienced this??

Hello belbeebala
You should be able to find older versions at the Linksys ftp site below.
Just be sure to get the correct one.
For example, if you have the WRT54G v6, you'll want to be sure you find one that looks something like this:
wrt54gv5_v6_fw_1.00.9_US_code.zip
That version can be found down near the bottom of the link, and is just an example of the 1.00.9 Firmware made specifically for the WRT54G v5 and v6....look very carefully for the one you want/need.
Good luck.
ftp://ftp.linksys.com/pub/network

Time Capsule connecting to windows with new firmware

I have opgraded my TC´s firmware to 7.4.1, and now my PC cannot log on to the harddrive in it. I get this error message: The computer cannot connect to the TC, check that netbios is on.
This is translatet fra danish, but the meening is the same.
What is wrong???

The new firmware does not work with Windows XP. I had to revert to the last firmware, and the last version of Airport, but the good news is, you can't do that thru Windows either. You HAVE to boot thru MacOS because their instructions for Windows and the Airport do not work. You are unable to find previous versions of the firmware unless you use the Airport util thru native MacOS.

Calendar Sync from iPhone 3G & Mobile.me to Outlook works with new firmware

YEAH - SOLUTION TO ONE PROBLEM FOUND !
Appointments I created on the Iphone do not get synced to Outlook via Mobile.me
*NO LONGER SO !*
I upgraded my firmware on my iPhone 3G to version 2.0 (5A347) by clicking on the Restore button in tha iTunes interface. It then downloads a new firmware to the iPhone and with this - I can sync all tha way !

I can't remember where I found this but it worked for me. To get appointments composed on the iPhone to sync with Outlook, the appointments must be recurring. So what I do now until Apple gets this problem fixed is make all of my appointments recurring with start and end date on the same day so they only show up once. Try it, it works for me.
Joe
Windows Parts-Pieces Windows XP Pro 3GB, 2.8GHZ
BJ Hammond
Posts: 1
From: Indiana
Registered: Jul 21, 2008
New! Re: Calendar Items Created on the iPhone do not sync to Outlook 2007
Posted: Jul 21, 2008 11:11 AM in response to: thejoeyz Reply Email
This worked for me. Thanks so much! It's still a pain in the "you know what!" Make sure you do the following.....
1. Repeat, Every Day, Save
2. End Repeat, Enter Same Date as above, Save

Permissions trouble with new MacBook Pro

I had previously upgraded my MacBook Pro (original unibody model) to Mountain Lion with no apparent issues. I have two Users, both with Admin status and everything appeared to function as before.
I just traded in my old MacBook Pro for a new current model Retina MacBook Pro, using Migration Assistant upon first startup to move everything over from the older machine. Most everything has been seamless - except for Permissions.
I started seeing messages appear indicating I didn't have permission to open files, run apps, delete files, etc. Looking at Get Info, I found Sharing & Permissions was only set up for (if I recall correctly) Admin, Administrator and something called Wheel. I solved the permissions issue while logged in as the primary User by adding both Users to the Sharing & Permissions section of the Info screen for the entire hard drive, giving them Read & Write access, and selecting Apply to enclosed items... That seems to have solved the issue for the primary User.
But then I tried working logged in as the secondary User. I started getting messages indicating I could not save a file I had just modified because I did not have permission, and that I should contact the Administrator. Well, that's me. So I tried the same thing that I did logged in as the primary User, but there was no change. I still can't save a modified file logged in as the secondary Admin User.
I haven't found anything that addresses this - except to learn where the Wheel User originated. Can someone point me in the right direction to where I can learn how to gain full, unlimited access to my own computer - under bothe User accounts?
Thank you.

You corrupted the permissions of every file on the volume. Restore everything from the backup you made before doing that. Then do as follows.
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Doesn't recognize my movies with new firmware

With the new firmware, I can't go to My Movies, where I have a few movies bought from Apple. I get a blank screen and I have to reboot Atv. All the rest works fine (music, tvshows, rent, etc). I guess there is a problem with that firmware and hope it will be solved soon.

is your appletv modified in any way ?

Nokia E71 problem with New Firmware 410.21.010

I have updated my Nokia E71 (RM-346) to new firmware 410.21.010. It creating a problem with battery that drain out quickly. Before update, for normal use, I need to charge once a week. But after upgrade new firmware 410.21.010. It finishes in 24 hour for normal use. I have read article that I can not downgrade, just only to wait for next firmware. Have some one any solution?
Solved!
Go to Solution.

I had a Nokia E71 running very happily on version 3 firmware. I updated the firnware to 410.21.010.
It worked fine until I switched the phone off and tried to re-start the phone. It stopped working.
It is my work phone. The messaage on the phone said take it back to my retailer. He tried to get it fixed but because Nokia say it is out of warranty I am out of a phone that is set up to use the Oki system.
It worked perfectly well until the software update.
It is now at my retailer waiting for me to collect.
This is very disappointing.
Especially as I am now considering not using a Nokia telephone ever again. Moreover, I am sure that Fair Trading would consider this matter very strange and might like ot investigate it further.
I want my E71 fixed for free by Nokia as it was working without any malfunctions until the firmware update - which was done after receiving notification from Nokia. I have not been able to use the Oki system for some weeks now and would like to contiue using Nokia. Otherwise I guess Nokia lose another customer to iPhone or HTC or Samsung. I await anyone's advice on this matter.

SRW224G4 - cant manage with new firmware thru Xmodem (dead after upgrade)

Hi All,
Before i wrote this msg, i saw few threads aboud "problem with upgrade firmware". Today i've upgraded my Linksys SRW224G4 to newest 1.2.2b and... after rebot, switch was still rebooting. I found on cisco site how to solve the problem regarding this: http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
So, i've made RS232 (because i don't have orginal one ; pinout 1-1 2-2 3-3 4-4 5-5) and connected to console
The problem is with hiting ESC on POST screen. My hyperterminal freezes So, i can't upload my files
Files: SRW224G4_fesm-12216.ros ; ls_106-12216.ros ; SRW224G4-1.0.0.61
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.
Downloading code using XMODEM.
Download failed
Perform WARM BOOT ...
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.
Downloading code using XMODEM.
When i try to send SRW224G4_fesm-12216.ros now, HT freezes too
Guys, what shall i do now ?
I think the RS232 cable is ok, pinout is linke normal DB9 one-to-one without crossing 2 with 3 pin.
Best regards, w8ing 4 any help.

So...
I've solved it
Problem was with settings in HT and sending ESC chacter
thank U ;D

How do you empty mail trash with new firmware

In 1.1.4 you could go to your email account click advanced and set the IPT to empty mail trash once a day. I upgraded to 2.0.1 and there is no longer a setting on that screen to set when trash is emptied. I get a lot of spam so I need to empty daily. Anyone know how to do this with the new firmware?
Thanks.

Also, you can move email to the trash folder directly from your inbox without even reading it. To do so from within your "inbox", click on "edit". You will notice there is a blue dot to the left of all new mail (shows you haven't looked at it.) When you click on edit, all the blue dots disappear.
Tap the same area where the blue dot was and a red circle will come up with a check in the center. Tap the Delete All button at the bottom and every red circled email will go directly to "trash".
In Trash, just do as the previous post says. Hit the edit button and then Delete All.
That's it and to me this is worth much more than the $9.95 for 2.0 that there is so much belly aching go on about on this forum.

HT5262 Hi Good morning, trouble with new phone 5s 32gb when i have just tied to connect to itunes nothing happens

Hi I have just plug into my computer with new iphone 5s 32gb and it will not connet to itunes

Our fix was:
Control panel, uninstall every apple program including bonjour and quicktime and mobile device drivers. restart computer, download itunes...worked fine on our 2 computers.

Srss-4.2 (EA2): troubles with new firmware

Similar Messages

Maybe you are looking for