SRST How to Documentation CUCM Version 7.1.5.34900-7

Hello:
I am looking for some really good documentation on how to setup SRST and how to enable it when a internet/network circuit is down but the router is there on site.
Thanks
Cathy                  

Hi Cathy,
Please see the link below:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesrst.html
It is one of the chapter of
Cisco Unified Communications Manager Express System Administrator Guide
Hope this helps.

Similar Messages

  • Is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5?

    Hello,
    Customer has a CUCM 6.1.5 cluster which is getting upgraded to 7.1.5. currently the CUCM CDR is sent to a external system (performix) which generates required reports. I would like to know if there is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5/ its vital to confirm this prior to upgrade as the performix is managed by a different vendor.
    Please advise !
    Shahid

    You can review the CDR documentation here to find that out, most likely there might be some changes
    Maintain and Operate Guides
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
    CDR admin guides have the field definitions.
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • How to maintain mulitple versions of universe

    We are planning multiple projects related to BO reports and each project is going in different time.
    How to maintain 2 versions of Universe, when we migrate universe for the Project 1 which is going ahead of the Project 2, I don't want to show the Classess, Objects of Project 2.
    Currently I am hiding the classess which goes later. But is there any feature in BO to maintain multiple versions.
    I am thinking of maintaining a good documentation on what am I adding, modifying, deleting for the project 2 and apply those changes to Project 1 related Universe and deploy when we migrate the universe for Project 2.
    But, I see lot of work will be duplicated as well as lot of documentation, and overtime it becomes a night mare.
    Anybody was in similar situation, and how did you handle it.
    Currently we are using BO XI R2, and planning to migrate to XI 3.0 in near future.
    Anybody know BO has any best practices document on this kind of situation ?
    Thank you in advance for your time.

    when you are talking about versioing , starting form XI 3.1 SAP business objects released the BusinessObjects LifeCycle Manager for XI 3.1
    find more details here
    http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf
    good luck
    Amr

  • How to find supported versions of IE

    Can someone please tell me how to find which versions of Internet Explorer are supported by which versions of Interactive Reporting. I've been banging my head against the wall trying to find the documentation that will give me that information. I'm not so much interested in someone telling me the answer as I am in finding out how to find the answer myself.
    Any help much appreciated.
    dave

    Could you tell me if Interactive Reporting WebClient is work goog with IE9 ? I have some problems with in version 11.1.2.2 , when the windows user have no administrator right, the result of BQY section is not displayed and the windows not work good.
    Thanks for your answer.
    Regards.
    Edited by: 960184 on 7 mars 2013 09:20

  • How to upgrade from version 3.2 to version 4

    Current using SQL Developer version 3.2.09.
    OS: SUSE Linux 11
    How to upgrade from version 3.2 to version 4?
    Thanks
    Scott

    Current using SQL Developer version 3.2.09.
    OS: SUSE Linux 11
    How to upgrade from version 3.2 to version 4?
    The documentation is your friend.
    All of that is explained fully in the Oracle documentation.
    Oracle makes their documentation available for FREE download. The Sql Developer Installation Guide covers nothing BUT how to install and upgrade the product.
    https://docs.oracle.com/cd/E39885_01/doc.40/e38928.pdf
    The user guide is also available
    https://docs.oracle.com/cd/E39885_01/appdev.40/e38414.pdf

  • ESS/MSS Documentation - different version components

    Hi
    I need Info ESS/MSS Documentation - different version components ( ESS & MSS version).

    hi,
    check the following threads,
    Re: ITS Based ESS & MSS Documentation.
    versions (u need the service market place id)
    ESS/MSS Documentation - different version components
    info of ess
    Re: ESS & MSS
    how to install
    Re: Implementation of ESS MSS on EP
    jdi cookbook for  ess/mss
    Re: Modifying ESS/MSS iViews
    examples for ess/mss
    Re: ESS/MSS/XSS Install Guides for NW2004s?
    let me know u need further info
    bvr
    s

  • How to disable previous version downloading in appstore

    hi,
    As i assume ios 7 onwards, apple allowing the users to download older version of application in appstore.
    But in my previous version has some bugs which i dont want to allow the users to download.
    i have tried to disable this under "Rights and Pricing section of the Manage Your Apps module in iTunes Connect".
    But i could not see any specific option like older version disability.
    So could you please help me on how to disable older version downloading in appstore.

    i found the solution.
    Please refere the following url under section "Editing Rights and Pricing Information" https://developer.apple.com/library/mac/documentation/LanguagesUtilities/Concept ual/iTunesConnect_Guide/11_EditingandUpdatingAppInformation/EditingandUpdatingAp pInformation.html

  • I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click. How do I get version 4 to do this? Thanks.

    I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
    How do I get version 4 to do this?
    Thanks.

    The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
    1) type in longer strings that narrow the search
    2) use an add-on to search just the beginnings:
    https://support.mozilla.org/en-US/questions/1037469
    3) install an older version of TB:
    http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

  • How to add different versions of layout in XML Publisher Report?

    How to add two versions of layout(RTF) for different languages in xml publisher report template so that user can see the report in two languages? Is that possible?
    If so then what is the procedure to do that? Can anyone help in this regard?

    Soma,
    Refer to [Oracle XML Publisher User Guide|http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115xdoug.zip] manual, Page 5-8 Adding Localized Templates for Additional Languages.
    Regards,
    Hussein

  • How to get the version no of a document created/updated in KM

    Hi All,
    We are currently working on SAP 7.0 SP16.
    We have used the KM API to store our documents into the KM repositories.
    The problem we are facing here is related to the version no of the documents created.
    I will explain this with an example :
    I have created a document "test.txt" --> default version no is 1
    I updated the same twice now there are 3 version for this document 1, 2 & 3.
    Now if I delete the version no 1 then there are only 2 document versions remaining in the system, but the Portal still displays them as 2 and 3.
    Now when I want to read the version history of this document I get an IResource object for each version but I am not able to find any means through which I can retrieve the version no of the IResource object which is currently being read.
    Can someone please help me the information regarding how to retrieve the version no from the IResource object returned whenever a document is read using KM API.
    Thanks in advance!
    Regards,
    Manish

    Hi,
    try something like this:
    String strRevisionID = null;
    if (resource.isVersioned())  {
      IVersionHistory versions = resource.getVersionHistory();
      if (versions != null) {
        IResource version = versions.get(i);
        strRevisionID = actResource.getRevisionID();
    hope this helps,
    Romano

  • How to delete old version of itunes and install the latest? When I update an error message pop-up.  "the feature you are trying to use is on a network resource that is unavailable".  Plese help!

    How to delete older version of itunes and installed the new version? When I try to install the new version (update) a message popup.  " The feature you are trying to use is on a network resourse that is unavailable".  Please can someone help? Thanks!

    Which particular .msi file is the message going on to say can't be found? (Several different msi files can be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

  • How to tell the version of the ORacle 9iAS?

    How to find the version information about the Oracle 9iAS (Not OC4J) from Enterprise Manager? In windows, we can always use help-->about to get the version number, how do I know the version of the application server is 9.0.2 or 9.0.3?
    thanks

    AS rel 2 is 9.0.2, never 9.0.3. But AS suite has many many product components that has different version number strings depending on your installations and your set of installed Patch Sets (e.g. you could have Infrastructure 9.0.2.3.0 and Core RSFs 9.0.1.4.0a)
    OC4J has been released as 9.0.3, next full AS is 9.0.4 (according to Metalink but who knows, maybe it'll be 10.0.1, 10.1.4 or whatever sounds marketingishly good)

  • How to find out version of Jakarta-ORO in Weblogic.jar

    Our environment is Weblogic 6.1 SP3 on Win2k professional with JDK 1.3.1_03 (build
    1.3.1_03-b03). We use Protomatter Syslog in our application and it uses Jakarta
    ORO classes for regexp parsing. Since Weblogic jar already has the classes we
    do not have a separate jar for ORO in our classpath.
    We have seen ArrayIndexOutOfBounds exceptions in ORO code and the bug is listed
    as solved in version 2.0.7 & later versions. http://nagoya.apache.org/bugzilla/show_bug.cgi?id=17707
    I appreciate someone letting me know how to find the version of ORO in Weblogic
    6.1 SP3. I could try placing the Jakarta jar before Weblogic jar on my classpath,
    but I would like to figure out the problem instead of trial and error.
    Thanks,
    Nitin
    [ArrayIndexOutOfBounds.txt]

    I don't find it with a quick scan of the src610 code line, you might have to
    open a support case, unless you can give me a class name for some more
    hints.
    mbg
    "Nitin Shenoy" <[email protected]> wrote in message
    news:[email protected]..
    >
    Our environment is Weblogic 6.1 SP3 on Win2k professional with JDK1.3.1_03 (build
    1.3.1_03-b03). We use Protomatter Syslog in our application and it usesJakarta
    ORO classes for regexp parsing. Since Weblogic jar already has the classeswe
    do not have a separate jar for ORO in our classpath.
    We have seen ArrayIndexOutOfBounds exceptions in ORO code and the bug islisted
    as solved in version 2.0.7 & later versions.http://nagoya.apache.org/bugzilla/show_bug.cgi?id=17707
    >
    I appreciate someone letting me know how to find the version of ORO inWeblogic
    6.1 SP3. I could try placing the Jakarta jar before Weblogic jar on myclasspath,
    but I would like to figure out the problem instead of trial and error.
    Thanks,
    Nitin

  • How to get shadow version of DTP in BI 7.0

    How to get shadow version of DTP in BI 7.0..
    while activating DTP i got error as :
    "Shadow DTP_7KU3789XP6HX9XP3NS6PZ7XAP object can not be resolved - Chain inconsistent"
    Please can you suggest me

    Check if this note is applicable :
    Note 1044054 - Correction: Shadow DTP with DataSource cannot be displayed

  • How to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris

    how to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris

    If you have only a single home, the quickest/easiest way is probably just to check the properties of %ORACLE_HOME%\odp.net\bin\2.x\oracle.dataacess.dll
    Or are you asking how to check it at runtime?
    If you want to see externally what is actually loaded by an app you can use process explorer
    http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
    If you want to check it in the app itself:
    http://stackoverflow.com/questions/383686/how-do-you-loop-through-currently-loaded-assemblies
    Hope it helps,
    Greg

Maybe you are looking for

  • Is this an OpenSSL or httpd or JAVA problem ???

    Hi All. Problem: Netscape 6.2 will not "redirect" from http://my.first.dom to https://my.secure.dom Objective : from first web-site, create a link to a secure web-site in index.html using an anchor e.g. ClickMe Set up : Apache2 httpd + mod_ssl + Tomc

  • The requested item could not be found...

    My phone is one of the tested for Firefox Mobile (Xperia X10), and yet I keep getting the "The requested item could not be found" when trying to download it...

  • Playlists in new format

    I'm still learning how to use the new iTunes format. Today I purchased an album and added it to theapprpriate playlist. That list was alreadyon my iPod Touch, so I want to replace it with the updated version. The problem is that I casn't figure out h

  • C4 - Issue With Proximity Sensor

    Got my xperia c4(E5363) this afternoon and noticed an issue with the proximity sensor. When I make a call and bring the phone near my ear, the screen becomes black BUT it does not recover even when I take the phone away from my ear. It remains black

  • Retrieving voice mail, error message on first attempt, success on second?

    When I first call voice mail and enter my password, I receive an error message, but I am successful on the second attempt. What is the problem, I changed the PW but still have the same problem?