SRT: Unsupported xstream found: ("HTTP Code 400 : Bad Request")
hi,
I get the error message
SRT: Unsupported xstream found: ("HTTP Code 400 : Bad Request")
what can cause that. I have created a RFC Connection have tested it, it workd well.
But when I call CALL METHOD r_user->MAP_R3USER i get this message.
Regards
sas
Thanks.
Kindly take note that the "Comment" field is not mandatory, so there is no need to bounce all 200 threads to the top again.
You can leave threads unanswered when you still hope or suspect that an answer might be searched be someone, but if it is a "dead duck" (like many cross-posted threads are - which often cause this problem) then please close them.
People who neglect following up on their threads, often neglect thanking those who put in an effort to help with helpfull answers. But many people notice this and stop answering. That does not apply in your case in posts since about July this year, so if you clean up then I am sure that you will further benefit from it.
Please take this in a positive way. Personally I enjoy reading some of your questions and learn from them as well.
Cheers,
Julius
Similar Messages
-
Dear expert,
When i run sap call .net web service ,it occurs error:
SOAP:1,008 SRT: Couldn't create Object: ("ICF Error when creating object for HTTP DESTINATION "tempuri.org": DESTINATION NOT FOUND")
Exception of class CX_AI_SYSTEM_FAULT
Could you please tell me how to do?
Looking forward to your reply.
Best Regards,
MerryHi Merry,
Did you create a logical port (using transaction code SOAMANAGER) for your client proxy & add the necessary configuration pointing to the .NET web service?
Also, if the logical port is configured, make sure that the URL ( for WSDL with endpoint) that you've specified for the logical port is correct. Error 404 generally means that you have made contact with the service provider but it can't find what you're looking for.
As a quick sanity test, you can run a test request to the service provider using a free tool SoapUI just to make sure that everything on the provider side is ok (i.e. they have provided correct WSDL with binding)
In future, please post this type of question in the SOA forum, see URL below, that's the correct forum for it. Thanks:
Service-Oriented Architecture (SOA) and SAP
Regards, Trevor -
"Unsupported xstream found: ("HTTP Code 200 : OK")
Hi,
I am trying to consume an webservice using ABAP (standrad web service provided by SAP). I am getting an error "Unsupported xstream found: ("HTTP Code 200 : OK")".
Has anybody faced this problem before ?
Regards
GoutamHey,
This is the description.along with the note.
1) Error: HTP 200 OK
Description: The request has succeeded. The information returned with the response is dependent on the method used in the request GET an entity corresponding to the requested resource is sent in the response; HEAD the entity-header fields corresponding to the requested resource are sent in the response without any message-body; POST an entity describing or containing the result of the action; TRACE an entity containing the request message as received by the end server.
Possible Tips: Have a look into SAP Note: 871959 -
I am trying to consume a web service from an Outbound Proxy. I am getting the following error message:-
Unsupported xstream found: ("HTTP Code 200 : OK")
This is a System Exception generated while I call the Outbound Proxy.
Kindly let me know what could be the issue.
An early reply will be highly appreciated as I am getting this issue in my Production Server.This doesn't appear to be a Web Dynpro related question. Please only post Web Dynpro ABAP related questions in this forum.
-
("HTTP Code 200 : OK") SRT: Unsupported xstream found
Hi,
when I am trying send a request to an external webservice
I am getting this message. Do you have an idea what can cause this error.
Regards
ilhan
Server: SAP Web Application Server (ICM)
HTTP/1.1 500 Internal Server Error
set-cookie: MYSAPSSO2=AjQxMDMBABhBAFIAQwBIAEkAQgBVAFMAIAAgACAAIAACAAYyADgAMQADAB
BFAFMAUgAgACAAIAAgACAABAAYMgAwADAAOQAwADUAMgA2ADAAOQAwADcABQAEAAAACAYAAlgACQACRA
D%2fAPswgfgGCSqGSIb3DQEHAqCB6jCB5wIBATELMAkGBSsOAwIaBQAwCwYJKoZIhvcNAQcBMYHHMIHE
AgEBMBkwDjEMMAoGA1UEAxMDRVNSAgcgCAYQFiMnMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJ
KoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0wOTA1MjYwOTA3NDNaMCMGCSqGSIb3DQEJBDEWBBThnsmT
%2f90RLKhrO%2fWjjbrvDvw%21czAJBgcqhkjOOAQDBC8wLQIUTDMZiy9E9buJoePGCdCDg5BwYvsCFQ
DQGyevsV2OfRgF9ol%2fQJKRj9l%214Q%3d%3d; path=/; domain=apslidl
content-type: text/xml; charset=utf-8
content-length: 675
accept: text/xml
sap-srt_id: 20090526/110743/v1.00_final_6.40/DE49D4AA07D6C6F1BC1E000C29A9F676
server: SAP Web Application Server (1.0;700)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><s oap-env:Header></soap-env:Header><soap-env:Body><soap-env:Fault><faultcode>soap-
env:Server</faultcode><faultstring xml:lang="en">SRT: Unsupported xstream found:
("HTTP Code 200 : OK")</faultstring><detail><ns:SystemFault xmlns:ns="http://w
ww.sap.com/webas/710/soap/runtime/abap/fault/system/"><Host>undefined</Host><Com
ponent>COREMSG</Component><ChainedException><Exception_Name>CX_SOAP_CORE</Except
ion_Name><Exception_Text>SRT: Unsupported xstream found: ("HTTP Code 200 : OK")
</Exception_Text></ChainedException></ns:SystemFault></detail></soap-env:Fault><
/soap-env:Body></soap-env:Envelope>hi
the error message comes if I use this tool http://curl.haxx.se/
When I use this tool I dont get an error. http://www.eviware.com/
To sum up:
What do you thing what the error causes ?
- the wsdl format is not correct
- you are saying "just compare the two clients"
what can I compare with them
Regards
ertas -
Hello ,
while importing the message mapping (in which RFC look up is used) from development to quality server, we are getting RC = 12 .
The error log shows the following error:
SOAP:1.007 SRT: Unsupported xstream found: ('HTTPCode 503 : Service Unavailable')
The server is Up and the credentials are also correct.
Can anyone suggest what can be the solution for this?
Do we need to include any specific objects in the Transport?
Thank you,
SivaHi Ranjani,
Please refer this forum thread discussed on a similar issue. [CTS+ For Portal Error: SoapFaultCode:1 Authentication failed; It might help you to move further.
Thanks
Uaruna -
HTTP Error Code 400 Bad Request error when connecting to SQL db
I realized I should move this to a new post since it was a new question...
I am trying to connect to a distributed SQL database from CS4.
Let me show you how the connection is built... and then maybe someone can tell me what I am doing wrong...
First I go to the database panel:
I click on the '+' sign to add an MS SQL Server Connection:
That brings up the SQL Server Connection window where I am supposed to replace the placeholders with my server values:
After I enter the correct values and click test, I get the error (HTTP Error Code 400 Bad Request)... These values work from SQL Server Management Studio on the same PC.
Just as a side note... I tried one other thing that makes me think SOMETHING is wrong here:
If I choose as OLE DB Connection instead... and click the 'Build...' button and then enter the values in the Data Link Properties Window (OLE DB Provider for SQL Server, and then the connection info on the Connection tab) and then click Test Connection on the Data Link Properties window, it says my test succeeded. Then I click 'ok' which takes me back to the OLE DB Connection windows with the connection string pre-filled, and click test on THAT window and I get the same HTTP Error Code 400 Bad Request error...
Hopefully that is enough detail that someone can can tell me what I have broken?
Thanks,
MikeYou will get a better response if you ask this question on the DW Application Dev forum. This forum mainly covers client-side issues.
-
"The request failed with HTTP Status 400: Bad Request." when running reports
Hi,
I installed reporting services and the install went fine. The Reporting Services are located on a different server. I can see all the reports in SCCM but when I try to run them I get the "400" error with the following details:
System.Net.WebException
The request failed with HTTP status 400: Bad Request.
Stack Trace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.ReportExecutionService.LoadReport2(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.<>c__DisplayClass2.<LoadReport>b__0()
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I can open the URL from the SCCM server but when I select a report I am unable to select any report options if available. If no options are availble the report just doesn't run, I don't get and error if I select "View Report" mutiple
times.
If I connect to the Reporting Services site on the computer where it is installed all the reports run fine.
One thing I have noticed is that when I try to change or add a role assignment for Reporting Services the edited account always reverts back to the default settings and the added Domain user is dropped.
ThanksI reviewed the topic and found a couple of steps I missed the first time around. I had to "Configure Reports to Use Report Builder 3.0 and setting the "Log on Locally" permission.
I then uninstalled the role and reinstalled it. I am still getting the 400 error.
When I inspected the SmsAdminUI.log I noticed the Error on the last line 2151811598 (it repeats in the log). I couldn't find anything specific related to it. By reading a few "related" Internet posts I came accross a intial setup
blog that noted some WMI firewall execptions (Async-in, DCOM-in and WMI-in) as require so I checked and they were not allowed on the SCCM server so I allowed them and tested with the same result. I turned them off again.
Here is the tail end of the SmsAdminUI.log
[19, PID:2684][01/24/2013 16:08:29] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[4, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[15, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[1, PID:2684][01/24/2013 19:06:02] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
[1, PID:2684][01/24/2013 23:39:14] :System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsCustomDialog.get_LocaleIndependentIdentifier()
at Microsoft.ConfigurationManagement.AdminConsole.ShowDialogTaskHandler.DoTask(NavigationModelNodeBase node, SccmTaskConfiguration sccmTask, PropertyDataUpdated dataUpdatedDelegate, Boolean readOnly)\r\n
[1, PID:5008][01/25/2013 20:48:00] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n -
BPC NW 7.5 - Request failed with HTTP status 400: Bad Request
Dear Experts,
I am trying to upload a flat file to BPC server. I am getting the following error.
" Request to transfer a file to the server failed (ERROR): The request failed with HTTP status 400: Bad Request"
Could any of you please help?
I am selecting BPC for excel >manage data > upload data file > selection for source file > selection of destination file > ok
Thanks in advance
Vipin JainHi Vipin,
Glad to know that you have heard good about me.
Can you try to upload the same file from some other system. If it doesnt work from any system, there might be some problem with the flat file. In that case, you can try to create a small and simple file and try to upload that.
You might also get this error if there is a blank line at the end of the file.
Hope this helps. -
Http error 400 - bad request when calling external webservice
I have a problem connecting OSB to webservices exposed by Lotus Domino Server.
When I test the services with XMLSpy, it works fine. I started a project in OSB, and imported WSDL files from the server url. So far it worked. I built the corresponding Business services. When I tried to test these business services, i got error 400 from the domino server.
Does anyone have an idea to fix this problem?
My response document:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.generalException</faultcode>
<faultstring>org.xml.sax.SAXParseException: Korai fájlvége.</faultstring>
<detail/>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>HTTP/1.1 400 Bad Request
Server: Lotus-Domino
Date: Sat, 09 May 2009 19:57:19 GMT
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Expires: Sat, 09 May 2009 19:57:19 GMT
Content-Type: text/html
Content-Length: 161
<HTML><HEAD><TITLE>Unable to Process Request</TITLE></HEAD><BODY><P>Http Status Code: 400</P><P>Reason: Unknown or unsupported protocol version</P></BODY></HTML>Yes, the problem should be in the request, but in the test console the request document looked fine.
I tried the following:
I tested the service with XMLSpy. I took the soap envelope generated, and pasted it into the business service test console. Then the payload should be the same in both cases, but it does not work. -
SOAP 1,007 unsupported xstream found
Dear experts-
We are implementing Learning portal. We have done the setup most of our services are working as desired. Except for iview in course admin, to publish course content.
In the publish course content iview when users select the browse functionality next to source file we are getting a
SOAP 1007 unsupported xstream found: (TTP code 401 : un authorized")
Has any one seen this error before?
I dont see any entries in the logs either.
You suggestions are most welcome.
Thanks,
John.Hi,
Did you resolve your problem????? could you tell me how did you do that?
Thnahs a lot -
Visual Studio Integrate REST Api - WIQL request returns status 400 (Bad Request)
Hi,
I'm attempting to submit a WIQL (Work Item Query Language) request to the Visual Studio Online REST api but receiving a status code 400 (Bad Request).
I'm using the sample request of the first example "Run a query" of the reference documentation listed here: http://www.visualstudio.com/en-us/integrate/reference/reference-vso-work-item-wiql-vsi
I've taken the sample request: https://fabrikam.visualstudio.com/DefaultCollection/Fabrikam-Fiber-Git/_apis/wit/wiql?api-version=1.0-preview.2 and substituted "fabrikam" with our account and "Fabrikam-Fiber-Git" with our team project
name.
I've used the exact same query listed for the sample request:
"query": "Select [System.WorkItemType],[System.Title],[System.State],[Microsoft.VSTS.Scheduling.Effort],[System.IterationPath] FROM WorkItemLinks WHERE Source.[System.WorkItemType] IN GROUP 'Microsoft.RequirementCategory' AND Target.[System.WorkItemType]
IN GROUP 'Microsoft.RequirementCategory' AND Target.[System.State] IN ('New','Approved','Committed') AND [System.Links.LinkType] = 'System.LinkTypes.Hierarchy-Forward' ORDER BY [Microsoft.VSTS.Common.BacklogPriority] ASC,[System.Id] ASC MODE (Recursive, ReturnMatchingChildren)"
Couple of things that I've tried:
1. I've tried both "api-version=1.0-preview.2" and "api-version=1.0-preview.1"
2. I've left out the project name from the request url: Based on the query format listed in the example "https://{account}.visualstudio.com/defaultcollection/[{project}/]_apis/wit/wiql?api-version={version}" I'm assuming that the wrapping of the
project section in the url in square brackets ([{project}/]) indicates that this section is optional.
3. I've tried a simpler query:
"query": "Select [System.WorkItemType],[System.Title],[System.State],[Microsoft.VSTS.Scheduling.Effort],[System.IterationPath], [Microsoft.VSTS.Common.BacklogPriority] From WorkItems"
Any help would be greatly appreciated.
Kind Regards,
MornéHello Morne,
Visual Studio Integrate forum is for questions about Visual Studio extension development. Yours seems to be about Visual Studio Online REST API to query something. Maybe
Visual Studio Online forum is better, I'm not sure.
I move it to [where is this forum for ...] forum, where the moderator will direct you to the right forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, KedarHi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar -
HTTP 400 - Bad request Page cannot be found while submitting tabular form
Hi,
My Apex application has sql report for summary and tabular form in a single page.
This page is working fine when the number of rows per screen is upto 130.
When we sets the maximum number of rows as more than 130, it displays the record but if we click button to submit the page to save
it shows page cannot be found.
HTTP 400 - Bad request
URL shows apex URL followed by /wwv_flow.accept
Is there any maximum limits to show number of records in a page in apex.
Since number of rows selection is not there in tabular form I created a select list with submit item with values 10,20,50,100,500,1000.
default value is '15'.
My tabular form has 15 columns and out of them 12 are editable.
Apex version is 3.1.Sounds like you're submitting too many parameters (15 * 130 = 1950), very close to 2000
Check this post our regarding PlsqlMaxParameters
"Page cannot be found" error when submitting tabular form
Scott -
Hello All,
I'm up against a show stopper. I have a simple region (lets call it the "Quote Region") of type SQL Query that returns rows from a table which I will need tp update. Occasionally the query will return a large number of rows, depending on the size of the customer's quote. My problem is when the quote is large (somewhere around 200 rows) and I perform an update I get HTTP 400 Bad Request "the webpage cannot be found", the URL says something about 7779/pls/apex/wwv_flow.accept.
The update is simple, it takes values that a user enters in another region and does a mass update to the lines in the Quote Region. The lines in the Quote region that are updated are determined by the user selecting them in a shuttle with the shuttle returning the line_id. For small quotes and even quotes with up to 195 lines everything works fine but I need this to work for large quotes! Does anyone know what's going on here???
I'm on version 3.1.2.00.02
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
I don't think it's my code, but here is the mass update anonymous block for review...
DECLARE
l_selected APEX_APPLICATION_GLOBAL.VC_ARR2;
x PLS_INTEGER := 1;
c_loopcount NUMBER := 0;
c_labelcount NUMBER := 0;
l_records VARCHAR2(32000);
l_line_id NUMBER;
BEGIN
-- Check that the shuttle has values
If :P3_APPLY_TO_LINES = 'NA' Then
RAISE_APPLICATION_ERROR( -20110, 'At least one line is required.' );
End If;
-- Convert the colon separated string of values in the shuttle into
-- a PL/SQL array
l_selected := APEX_UTIL.STRING_TO_TABLE(:P3_APPLY_TO_LINES);
FOR i IN 1.. NVL(l_selected.count,0) LOOP
l_line_id := l_selected (i);
c_loopcount := c_loopcount +1;
-- loop through each of the label values that have been entered by the user
FOR i IN 1 .. apex_application.g_f11.COUNT LOOP
c_labelcount := c_labelcount +1;
-- Update the transaction table with the provided value
UPDATE forx_label_transactions
SET value = apex_application.g_f01 (i) -- the user supplied value
,last_update_date = sysdate
,last_updated_by = :P3_LAST_UPDATED_BY
,last_update_login = :P3_LAST_UPDATE_LOGIN
WHERE label_id = apex_application.g_f11 (i) -- the hidden label id that is the foreign key
AND source_transaction_id = l_line_id; -- the line id of the quote line
--AND source_transaction_id = 1074016;
END LOOP;
l_records := l_records||l_selected (i);
END LOOP;
:p3_labelcount := c_labelcount;
:p3_loopcount := c_loopcount;
:p3_selected := (l_records);
END;
Edited by: blue4speed on Oct 7, 2010 8:54 PM
Edited by: blue4speed on Oct 7, 2010 9:04 PMWhen submitting a page there is some limit about the page size (I think 32K) after that it throws HTTP 400. We were also facing the same problem in our large tabular form. You can use Pagination to limit the rows displayed in a page to avoid this error.
But when using pagination you will face another issue. Let's say you have 100 rows and pagination is displaying only 10 rows. If you update some rows and press navigation button (Next/Previous) the changes you have made are lost and not saved. I also have a workaround for this if you are interested please let me know. I will post you if you need it.
Maybe you are looking for
-
Composite Primary Key in M:N CMP Entity Bean Relationship
Dear Sir/Madam, We are creating an Enterprise Application for our institute using EJB 2.0 specifiactions. In the course of developement, we are facing a problem in writing the CMP Entity Beans with EJB Relationships. We are having many to m
-
Booting from external hard drive
Hello. How do I install Mac OS X on an external hard drive, or have Mac OS X running on an external hard drive and boot from it? I tried to install to it and it says Mac OS X cannot be booted from this drive. What should I do?
-
Hi, I've bought an iPod Touch together with an Universal Dock (Apple branded). I have an old sector adapter that came with my old iPod (3 gen). When I plug the sector adapter to my iPod Touch, the batterie charges itself ok. But when I plug it to the
-
ACS Express 5.0 - "unique authentication" what does it mean?
Hi to all, the ACS Express 5.0 datasheet states: "Cisco ACS Express supports a maximum of 50 AAA clients and 350 unique user logins in a 24-hour period" It's clear what's the meaning of the max 50 AAA clients...in fact what is not clear is regarding
-
Safari running very slow, freezing and unexpectantly quiting
Please help!!! this started about a week ago and is driving me mad! I have changed the proxies, turned off extensions and reset safari Here is the EtreCheck Hardware Information: MacBook Air (11-inch, Late 2010) MacBook Air - mode