Srw.run_report problem. Help needed...Urgent

Hi,
I am very new to Oracle Reports. I need some help in using the srw.run_report
I am having two reports. Rep_A and Rep_B
I will always invoke the Rep_A first...Rep_B should always be invoked in Rep_A
In Rep_A, i need to check a parameter P_Param1 and based upon the value i need to proceed as follows
If P_Param1 = 1 then
--Rep_A should be generated and returned as stream(cache)
--Rep_B shouldnt be invoked
If P_Param1 = 2 then
--Rep_B should be generated and returned as stream.
--Rep_A should not be generated
If P_Param1 = 3 then
--Rep_A and Rep_B should be generated and returned as stream
--(Rep_A followed by Rep_B)
If P_Param1 = 4 then
--Rep_A and Rep_B should be generated and saved as files in a specified location.(this location is in another machine)
This is my requirement. I hope I am clear with my requirement.
How can we achieve these.
Are there any technical issues?
Please guide me
thanks...
siva

Hi all,
just to keep this thread active.
can anyone help me in using srw.run_report.
its an urgent requirement.
thanks...
siva

Similar Messages

Zoom problem(help needed urgently please )

friends,
i m working on a class in which there is one JPanel inside a JInternalFrame. i have functionalities like zoomin and zoomout. for that i m writing my code on mouse clicked of JPanel but my problem is that mouseClicked method is getting called several times even if i click once on JPanel and thus zooming the JPanel by a very large value.
please help me if u have any solution for it.Its very urgent.

You are still crossposting.
It would be a waste of everyone's time to answer you here, since quite likely others have already helped you elsewhere.

Zoom problem (help needed urgently)

friends,
i m working on a class in which there is one JPanel inside a JInternalFrame. i have functionalities like zoomin and zoomout. for that i m writing my code on mouse clicked of JPanel but my problem is that mouseClicked method is getting called several times even if i click once on JPanel and thus zooming the JPanel by a very large value.
please help me if u have any solution for it.Its very urgent.

it would be difficult to post complete code so i m posting the important part of my code related to this zoom problem.
public class PaintPanel extends JPanel implements MouseListener
     public Rectangle normalShape;
     public int initialX =0;
     public int initialY = 0;
     public int finalX = 0;
     public int finalY = 0;
     protected void paintComponent(Graphics g)
addMouseListener(this);
super.paintComponent(g);
scale = zoomvalue;
// System.out.println("scale value is " + scale);
Graphics2D g2d = (Graphics2D) g;
AffineTransform at = g2d.getTransform();
AffineTransform atnew = new AffineTransform();
atnew.scale(scale,scale);
at.concatenate(atnew);
// g2d.setTransform(at);
g2d.setTransform(at);
public void mouseClicked(MouseEvent e)
// get the position of mouse released
setCursor(new Cursor(Cursor.DEFAULT_CURSOR));
finalX = e.getX();
finalY = e.getY();
temploc3 = finalX;
temploc4 = finalY;
if(WellPlot.zoomFlag)
System.out.println("zoomvalue in mouseClicked " + zoomvalue);
zoomvalue += 0.1 ;
setZoom();
return;
}

Problems Help needed URGENTLY

Hi
I have today updated to the latest software for my Nokia 5800 V 31.0.101 and now the ringtones and images that were pre installed seem to have gone also the facebook icon and games. I have tried to reinstall the software again but this did not work and also tried a hard reset on the phone this did not work either.
Please can you let me know if there is anyway to get these things back? Also is there anyway to downgrade back to the verison I was using before?

yes it will. also, if you don't like it, you can try on of these (one of them is the actual default facebook client) : http://store.ovi.com/content/6B505CF11830BD92E040050A85326355
The old firmware may have come bundled with different games, melodies and applications, however the default firmware configuration doesn't come with these stuff, that's why you're experiencing these problems now. But you can try browsing thru the Ovi Store, you might find the same old applications once again, for free, of course. Good luck!
If, from time to time, I actually give a good advice, please click on the Kudos icon, I have cookies and free hats!

HT201210 i have an error of no 11. kindly help, needed urgently

i have an error of no 11. kindly help, needed urgently
when i try to upgrage my
iphone 3gs wit 4.1 to new latest 5.1
it gives the erorr of 11. what that mean? Reply as soon as you can !
thnx

Error -1 may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Some J2ME midlets doubts!! help needed urgently!!!

Hi,
I am currently working in a company where it does wireless technology like WAP and I am assigned a task of creating a screensaver midlet. I have some doubts on the midlets.
1) How do i use a midlet suites? From what I heard from my colleagues & friends, a servlet is needed for midlets to interact with one another. is it true?
2) How do I get the startin midlet to take note the phone is idling so that the screen saver midlet can be called?
Help needed urgently... if there is any source codes for me to refer to would be better... Thanks...
Leonard

indicates that MIDlet suites are isolated (on purpose) from each other, so you can't write over another one's address space.
Also, I believe (at least on cell phones) that you have to specifically enter the Java Apps mode; unless you do the app won't execute. If you are in Java apps mode and a call comes in, the cell's OS puts the Java app currently executing on "Pause" mode and switches back to phone mode.
Not sure if you will be able to have a Java app do that automatically.
BTW why do you need a screensaver on an LCD display? Is it really intended to show an advertisement?
Download and real all the docs you can from Sun, once you get over the generic Java deficiencies MIDlet's aren't that hard.

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss....

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss..

The startup disk may need repairing.
Startup your Mac while holding down the Command + R keys so you can access the built in utiliites to repair the startup disk if necessary or restore OS X using OS X Recovery

Help needed urgently on a problem..plzzz

hi..this is a linear congruential generator. I have to implement it and i need the execution time for the program.
for your understanding i'm providing an example below.
Xn=(( a* xn-1 )+b) mod m
If X0=7 ; a = 7 ; b =7 ; m=10
Then
X0 = 7
X1 =((7 * 7) + 7))mod 10 = 6
X2 = ((6*7)+7))mod 10 = 9
X3 = ((9*7)+7) mod 10 = 0
X4 = ((0*7)+7) mod 10 = 7
Now since the cycle is being repeated i.e 7 appears again�so the period is 4 coz there are 4 diff nos. i.e 7,6,9,0�..
help required urgently....your help will be appreciated...thankyou..

Hi,
I wrote the code so that it catches any cycle (not only the "big" one).
Otherwise it will enter infinite loop...
The time complexity is O(N*logN): it can do at most N iterations (here N is your 'm'), and in each iteration there can be O(log N) comparisons (since I maintain TreeSet).
Interesting issue: is it possible to supply such (x0, a, b, m) tuple such that all possible values from 0 to m-1 will be output? I think no :)
Here is the program:
package recurr;
import java.util.TreeSet;
import java.util.Comparator;
public class Recurrences {
     private static long x0, a, b, m;
     private static TreeSet theSet;
     public static void main(String[] args)
          long l0, l1, l2, l3;
          try {
               x0 = Long.parseLong(args[0]);
               a = Long.parseLong(args[1]);
               b = Long.parseLong(args[2]);
               m = Long.parseLong(args[3]);
          } catch(NumberFormatException nfe) {
               nfe.printStackTrace();
          System.out.println("X[0]: " + x0 + "\n");
          long curr = x0;
          boolean cut = false;
          int i;
          // initialize the set
          theSet = new TreeSet(new LongComparator());
          // we can get at most m distinct values (from 0 to m-1) through recurrences
          for(i=1; i <= m; ++i) {
               // iterate until we find duplicate
               theSet.add(new Long(curr));
               curr = recurrence(curr);
               if(theSet.contains(new Long(curr))) {
                    cut = true;
                    break;
               System.out.println("X[" + i + "]: " + curr + "\n");
          if(cut) {
               System.out.println("Cycle found: the next will come " + curr + "\n");
          } else {
               System.out.println("No cycle found!");
          System.out.println("----------------------------------");
          System.out.println("Totally " + (i-1) + " iterations");
     private static long recurrence(long previous)
          return (a*previous + b)%m;
     static class LongComparator implements Comparator
          public int compare(Object o1, Object o2)
               if(((Long)o1).longValue() < ((Long)o2).longValue()) {
                    return -1;
               } else if(((Long)o1).longValue() > ((Long)o2).longValue()) {
                    return 1;
               } else return 0;
}

Srw.run_report problem

Hi all,
i'm trying to run a report inside another report using srw.run_report routine, but i get the following error:
REP-0110: Impossible to open file 'app/OA11i/NOCE/software.ds/noceappl/xxene/11.5.0/reports/I/XXENE_PROPACCPDRNOINT.rdf'
the full command that i use is: srw.run_report('report=app/OA11i/NOCE/software.ds/noceappl/xxene/11.5.0/reports/I/XXENE_PROPACCPDRNOINT.rdf desname=DL006345.pdf destype=file desformat=pdf batch=yes P_PDR_ID=10015 P_DATA_ATTIVAZIONE=20-FEB-07 P_USE_SITE=LEGAL');
Thanks for the help,
bye
Simona

Hello Simona,
Below is the definition of the error you are getting:
Cause:     Report Builder tried to open the file shown and could not. The possible causes of this error include the following:
        Case 1:     The file was not found under the specified name in the specified location.
        Case 2:     You lacked the necessary privileges to open the file.
        Case 3:     A system error made it impossible to open the file.
Action:     You can take the following actions to correct this error:
        If Case 1:     Make sure the file is stored in the specified directory under the specified name. If it is not, change the directory and/or filename as appropriate.
        If Case 2:     Make sure that you have the privileges necessary to open the file. If you do not, change your privileges accordingly.
        If Case 3:     Consult your operating system documentation or contact your system administrator.Hope this helps.
-Marilyn

Srw.run_report problem with distribute=yes

srw.run_report distribute=yes is not working for me. When running the report in rwbuilder or using command line rwrun, the distribution works fine.
The problem is eg. a report on employee, with a group on Dept_no. Dept_no is used as distribution list &<dept_no> i the distriubution Dialog in the Report and repeat on G_dept.,
The report wil generate a number of reports e.g. Dept_no_10.pdf, Dept_no_20.pdf and so on.
BUT, the file name Dept_no_10.pdf is containing data from Dept 20, and the file name4d Dept_no_20.pdf contains data from Dept 20.
So the question is, if the report can distinguish the number of files to generate and the correct name, how come the data is corrupt ?
Any ideas is wellcome.
Our installation is 11.2.0.2 and I'm using Reports 9.0.4.0.33.
The use of srw.run_report distribute=no is working fine.
The setup is to run from pl/sql calling srw.run_report
claus
try for a better example at this link : https://technology.amis.nl/wp-content/uploads/images/Reports%20Bursting.pdf
This explains classic distribution/bursting of reports, and it works with rwbuilder/rwrun, bur not through srw.run_report

Hello,
If you copy the parameters displayed by srw.message and create a BAT file with these parameters
and rwrun60 :
rwrun60 <the paremeters displayed by srw.message>
Does the report run correctly ?
Regards

Help needed Urgently- Rebate based on collected amount

Dear all,
I come across scenario while discussiion with client that they require rebate with collection. Details of the requirement are given below:
1. SAP rebates run on billed values & set the accrual in rebate agreement on the rate what we have specified in the rebate agreement. Requirement is that, If i have billed on 1000$ & my accrual value is 100$ with the rate of 10%. If i collected 800$ instead of 1000$, then i need to pay the accrual on the basis of 800$ not on the basis of 1000$. It means i have to adjust accrual amount on the basis of 800$. Conclusion is that i have to pay not 100$ accrual instead less then 100$ on the basis of 800$ which i collected.
2. In month 1 have billed on 5000$, my accrual amount is 500$ with rate of 10%. In the 2nd month i have to bill 1000$ and i have given an discount of 500$, it means my billed value is 500$ and my accrual amount is 50$@10%. In month 3 again i billed 500$ and my accrual amount is 50$@10%.
Requirement is that, when i am going to pay the accrual to client, i should pay correct accrual for which he is entitled for. Means i should pay 100$ accrual not 600$ because i have already given an discount of 500$. Discount which i have given already of 500$ should need to be offest with the first month accrual of 500$. So remaning accrual is 100$.
Great if somebody can help me out for the solutioning of the above requirements.

Thanks Ivano,
Somebody has started the conversation.
Let me put my questions again.
This requirement is nothing to do with Payment procedure in the agreement type.
1. In any month if i billed 1000$, so my account receivable would be 1000$. My rebate for that month is 100$ at the rate of 10%. During customer receipt if i collected against my invoice 900$ instead of 1000$, my accrual needs to be corrected 90$ instead of 100$.
I know this can not be fullfilled by standard SAP, by any thoughts on this welcomed.
2. I know Rebate can be settled partially or full settlement by payment method( by cheque, bank transfer, or by credit memo) we have configure in rebate agreement type. But here requirement is totally different.
Here, i need to pay the Rebate as a Discount instead of by cheque or by credit memo. While doing the partial or full settlement system will take into account collected accrual up to that day & apply as a discount to the final bill.
Scenario is like that sometimes customer asked to give us the discount on bill for whatever they accrued so far.
This is again cannot solved by standard SAP, but any thought by any body welcome. We have already thought that we need to enhance the solution.
Solution needed urgently.

Unable to allocate 27160 bytes.........Help needed urgently

hi
in my production database in getting this error..
ORA-04031: unable to allocate 27160 bytes of shared memory ("shared
pool","unknown object","sga heap(1,0)","session param values")
help needed urgently

If you have a program that does not use bind variables you can get this error.
In such cases you do not want to increase the size of the shared pool, but reduce it, and flush regularly. This is a bug in the application and should be fixed to use bind variables.
Another possible workaround is setting cursor_sharing = force, but this can cause other problems, so should only be used as a last resort. If the apps connections can be distinguished by user account or machine, then a log on trigger could be set cursor_sharing just for that application, to limit the damage until the vendor can fix it.

Reports 6 using SRW.RUN_REPORT - problem with transferring variable to new report.

I have one report "analyse" that calls another report "pdf".
In "analyse" i have a function pdf_rep:
FUNCTION PDF_Rep(c_proevenummer varchar2) RETURN boolean IS
msg char(150);
BEGIN
SRW.Run_Report
('BATCH=YES
REPORT=PDF
DESTYPE=file
DESFORMAT=PDF
desname=test1.pdf
p_proevenummer='||(c_proevenummer) );
return(true);
exception
     when srw.run_report_failure then
     msg := srw.geterr_run;
     srw.message(1,'err msg: '||msg);
     return(false);
END;
This function is called from BeforeReport-trigger. (or AfterParameterForm-trigger)
The "pdf" query:
select proevenummer
from View_Analyse
where proevenummer= :p_proevenummer;
The "pdf" report is run and a test1.pdf file is made BUT the where-clause is NOT performed.
What do i do wrong ?

Hello,
If you copy the parameters displayed by srw.message and create a BAT file with these parameters
and rwrun60 :
rwrun60 <the paremeters displayed by srw.message>
Does the report run correctly ?
Regards

Help neede urgently(Problem in adding exponential numbers)

Hi,
Actually i want to add the contents of two files which contains exponential numbers.
i'm not able to add these numbers. Can any one help me?
import java.io.*;
import java.nio.*;
class userFile
     public static void main(String[] args) throws IOException
          try
               BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
          String s1,s2,s3;
          FileReader fr1,fr2;
          System.out.println("Enter first file :");
          s1=br.readLine();
          System.out.println("Enter second file :");
          s2=br.readLine();
          System.out.println("Enter new file :");
          s3=br.readLine();
          fr1= new FileReader(s1);
          fr2= new FileReader(s2);
          BufferedReader fin1=new BufferedReader(fr1);
          BufferedReader fin2=new BufferedReader(fr2);
          String str1,str2,str3;
          double i1,i2,i3;
          OutputStream fout=new FileOutputStream(s3);
          while((str1=fin1.readLine()) != null)
               while((str2=fin2.readLine()) != null)
               i1=Float.parseFloat(str1);
               System.out.println(i1);
               i2=Float.parseFloat(str2);
               System.out.println(i2);
               i3=i1+i2;
               System.out.println("i3=" +i3);
               str3 = Float.toString(i3);
               byte buf[]=str3.getBytes();
               fout.write(buf);
               fout.write('\n');
          catch(NumberFormatException e)
               System.out.println(e);
}I need help urgently.
Thanks in advance.

By "exponential number, do you mean one in scientific notation (eg. -1.55743e21) or what?
What do your files look like?
What problem are you encountering? Is an exception being thrown? If so, give us the exact message (copy/paste). Is the results simply not what was expected? If so, give us the input, the expected results and the actual results for us to compare and consider.
Chuck

Audio Problems in Adobe Presenter: Help Needed Urgently!!

I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
Can anyone help me on this?
1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
2. Is it the problem of Trial Account or something like that?
Please let me know the solution. Need to work on this ASAP!!!
Thanks in Advance,
Yogini

This is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer?

Srw.run_report problem. Help needed...Urgent

Similar Messages

Maybe you are looking for