SRW2008P - QoS Advanced Mode is greyed out

Hello,
in the QoS-section of the SRW2008P web-interface I can choose only between Disable and Basic, Advanced mode is greyed out.
I've created a new ACL but QoS Advanced mode isn't available.
What can I do to activate it?
Boot Version: 1.0.1
Software Version: 1.0.4
Hardware Version: 00.03.00
Any help much appreciated, thanks in advance!

Hi Martin
There is a old english expression, Brad " let the cat is out of the bag"
The light version of CLI isn't support by Small Business Support Center (SBSC) on the older model SRW. But as Brad intimated, it works fine.
Martin, if you need support by SBSC on the older SRW2008P, the folks at SBSC will most likely want to share the GUI during a webex session and look at the GUI configuration.
If you have to try LCLI, well I better tell him how to exit out of the un-supported LCLI.
The way to exit out of this unsupported CLI and to 'exit' back from configuration mode to the user prompt and type;
'debug' and then 'menu'
Just for everyones information, when we refreshed the SRW2008P with new product p/n SRW2008P-K9-NA (North America variety) the product management team gave it a supported CLI with version 1.1 of the firmware.
This newer SRW2009-K9_NA (300 series switch),   also has a CLI manual that can be downloaded.
The SRW2008-K9-NA is the new 300 series switch technology and the resfreshed version of the old SRW2008P,
So
old EOS/EOL switch     order p/n SRW2008P
refreshed switch         order p/n SRW2008P-K9-NA (SG300-10P with two extra active ports.)
regards Dave

Similar Messages

Switch to control mode is greyed out

Decided to start a new discussion hoping someone can help.
Hi.
I have a problem with screen sharing where the option to "switch to control mode" is greyed out. I can only observe but not control the mac. I have 4 macs at home with the same set up "it looks like the same set up" and it only happens on my wife's new iMac.
I appreciate your help.
Yvon.

Control mode on Screen Sharing doesn't work - Solved

Disc mode is greyed out

On the summary tab of devises there is an option to enable disk use but I can't select it because its greed out. The manual says that this feature must be enabled so that the ipod appears on my PC. I'm trying to copy off the voice memos but can't. The ipod is already appearing in my PC but I can't see any folder or sub folder that I can copy across to my PC. How is this done?

It's the latest Nano.

No advanced mode on Mac OSX?

I'm usin the VPN client 4.9.01 on Mac OX 10.6 and I can not activate the advanced mode in order to set up or configure connections. The software starts in simple mode, CMD+M does not doe anything and if I click on 'Options' the Advanced Mode is greyed out. I already tried uninstall and reinstall but the situation doesn't change. It's unbelievable frustrating, how can I resolve this?

I have exactly the same problem and also tried uninstall and reinstall but nothing works. How to solve this?

How to Grey out the field "tracking number" during change mode in the order

HI Expert,
How to grey out the Tracking number (AFVGD-BEDNR) at Order -> Operation tab -> external tab ->tracking number.
during creation IW31 = not grey out and allow entry.
for change mode IW32 = grey out
if i set grey out at config OIOPD, it will grey out even during creation mode.
Please advise
Thanks
Regards

Hi
I think Using field selection it is not possible to make as display ,kindly check with screen or transaction variant -SHD0
regards
thyagarajan

Recording Modes greyed out

All my recording modes have greyed out, as the attached screen shot, so I cannt change options.
I seem to be stuck in Demo mode.
Any ideas what I have done wrong?
Noel
England

Hi Noel
Please note that if you have an image, you may insert it inline using the little camera icon just above where you type the post.
This way we may see your image immediately and not have to wait for the forum mods to make it available in the attachments section.
So it will be helpful if you could reply and add the image that way. Perhaps then we might better help you.
Also, what version of Captivate are you using?
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Why is the input mode greyed out when I try to create a virtual channel for my 1102?

I have set up a virtual channel for my SCXI-1102, and the input mode is greyed out with it set to "differential". I have already skimmed this forum for answers, and I have checked to verify that the mode slot under the AI tab for my MIO-E series card is set to nonreferenced single-ended mode. I then created a virtual channel with the device slot under the hardware column set to Dev1_SC1_MD1CXI-1102. At this point, as already stated, the input mode goes grey while set to differential. What's going on?

Hello,
All outputs from the SCXI module are measured in differential mode. You can still mix differential and single ended measurements (if you use the remaining channels of your daq board).
The easiest way to mix modes is with virtual channels. All SCXI analog input channels will be differential, while you can make other virtual channels differential or single ended. If you don't want to use virtual channels, you can use AI Hardware Config in LabVIEW to change the mode.
Hope this helps. Regards,
John N
Applications Engineer
National Instruments

Extending View Object expert mode greyed out

Hi,
I am trying to extend the View Oject oracle.apps.irc.offers.server.IrcOfferSearchVO. While extending the expert mode check box is greyed out and I can't change the SQL. I wanted to add a table in the from list and add an extra where condition using the added table.
Can you please help me how can I extend the view object if the expert mode is greyed out.
Thanks,
HC

Hi Pratap,
When I select Edit the seeded VO IrcOfferSearchVO, I received the below message.
Warning: There are java errors for this object. The wizard will be read-only until they are corrected.
file:/C:/..../myprojects/oracle/apps/irc/offers/server/IrcOfferSearchVORowImpl.java
file:/C:/..../myprojects/oracle/apps/irc/offers/server/IrcOfferSearchVOImpl.java
Its not allowing me to set the expert mode for the seeded VO.
Thanks,
HC

VOID button on dispute case is greyed out

Hi All,
VOID button in a dispute case change mode is greyed out. Pls through some light on how to go over activating VOID button.
Thanks
Rajanikanth

Hi Mark/Nick
I have configured status profile for VOID correctly.
Status 50, System Status 009, Low value 10 and High Value 20.
However, VOID button is still greyed out. In other system we have configured with the same status profile values and VOID button is working fine in other system. We are not able to figure out what went wrong. Is there any authorizations missing for my User ID ?. Your help in this regard is appreciated.
Thanks
Rajanikanth

"Use RAW files with external editor" greyed out for Photoshop CS2?

I've just upgraded from iPhoto 5, and the "Use RAW files with external editor" option in the advanced preferences is greyed out when I select Photoshop CS2 as my external editor (back in the General pane).
It works fine when Preview.app is selected. I can understand that pre-CS2 Photoshop wouldn't be available, but CS2 is capable of editing RAW images.
Has anyone been able to get iPhoto 6 to send a RAW image to Photoshop CS2 using this preference? I've written an Applescript to do it in iPhoto 5, but I'd rather use something cleaner...
15" PowerBook G4 Mac OS X (10.4.4)

Works great with Photoshop Elements, opens with Camera Raw. The issue is you can't save it so that iPhoto gets the changes.
You have to save it and then re-import. I tried all permutations of saving it in originals and modified folders in the library. No luck. The only thing I didn't try is to save it as a jpeg over the top of the full sized one iPhoto created on import.

"Authentication Type" greyed out in Advanced Wireless Settings (WRT54G)

I wish to change my Authentication Type from Auto to Shared Key in my Wireless -> Advanced Wireless Settings section of my web-based admin utility. However, it's been greyed out for some reason.
I understand that the Shared Key mode is more secure than the Auto mode, therefore I wish to change it. Would anyone happen to know as to why this would be greyed out like this and how I can fix it so that I can have access to the options? I'm using WRT54G V.6 with firmware v.1.01.1 (the latest one from linksys). TIA.

I think I figured it out. I'm currently using WPA Personal mode and as I understand it, only WEP mode applies to whether you're using an Open System or Shared Key. Can someone please confirm this for me? TIA.

HT1473 I have always imported my cds into iTunes using one step called 'joining cd tracks' which is done under the "Advanced" drop down menu. I then went on with the process. Half way through the process today the "join tracks' choice greyed out. Not avai

I have always imported my cds (including books) into iTunes using one step called "join cd tracks" which is under the "Advanced" menu. Never a problem. But today I was importing a 10 disc book and on the 7th disc all of a sudden the choice to join cd tracks was greyed out. I have tried it with other discs. No luck. How can I get to this option again. I was not doing anything different so don't know what took away this choice. Can anyone help me?

Thought it had worked but soon found out it had not.
after further days of trying finally, solved it for me Yesterday.
turned off notifications when locked, and bingo, wow.
i have not turned off iCloud but location services are also off.
best thing to do I found was keep checking your usage, settings, general, usage, and flip down to bottom, if the standby and usage are similar there is a problem, if there is a big difference then all is ok. Just keep turning things off and on until the difference is very apparent.
something on my phone was keeping the phone alive even when turned off, and I think this was the phone repeatedly trying to update continually.
to me this is definitely down to the iOS, my wife has exactly same phone and iOS but hers doesn't have any problem and the battery lasts for days.
the guy at the Genius Bar told me to restore the phone via iTunes, not iCloud. This is because iCloud remembers the exact info from your phone and simply reinstates it when you restore, and this includes the iOS too.
when I get home from holidays that's what I'll do, or wait for iOS 8 in few weeks. But I'm so pleased I finally made it work, I was beginning to think ditch the phone and buy Samsung.
anyway anyone out there please try my final solution and let me know if it works for you?

Unable to create a new playlist on Itunes when in "On My IPhone " mode. New playlist shows as greyed out. Why?

Before the recent update on Itunes, I was able to create new playlists and drag music diretly into saved playlist folders from my laptop. Now, I can't do either because when in the what's on " my Iphone" mode, trying to creat a playlist is impossible because it is greyed out. I can no longer drag and drop music into saved playlist showing on my phone. What's going on Apple? or anyone.

Csound1 wrote:
Don't press the option key, instead hold down the command and R keys, if recovery is present that will take you there.
Thanks for this suggestion, but I have already tried that. The only way for me to boot my mac is by starting in single user mode and mounting the drive, then exiting from there. Nothing else will work, I cannot press Command-R, so this will not work.
Thank you both for your suggestions as well. I found your help useful and it will help me solve this :-)
I have ended up buying a Flash Drive, and will now download the Mountain Lion installer. I assume that I will be able to boot from this, and then use Disk Utility to format the drive, and later on install Mac OSX Mountain Lion on it?
Thanks Again.

Sold to Party and Ship to party field are in grey out mode in VA01.

Hi Friends,
I am facing a very critical situation, Please help me on this.
While creating the sales order by VA01, the Sold to Party and Ship to Party field are in grey out, so we cannot enter sold to party and ship to party. This is happening for all Order types.
And while checking the existing sales order by VA02, so I found that at Header level and Item level the Partner tab are disable
( mena partner tab are in grey mode,).
But when we click on sold to party field in VA02 it directly moves to partner but all Partner shown in Sales tab.
I have check all the partner function and partner determination configuration.
So can any one help me out in this, how in VA01 sold to party and ship to party field are in grey out mode.
How in VA02 the partner tab are disable.?
Thanks
Irfan Ullah
09370236510

Hai Irfan Ullah,
In Sales - customer
1. Partners are listed (SP,BP,PY, SH)for account group and Partner Determination procedure(TA) is assigned to it
Now for sales order type you need to assign the partner determination process
SPRO
Sales and Distribution
Basic Functions
Partner Determination
Set Up Partner Determination
Execute
Set Up Partner Determination for Sales Document Header
Select TA - standard order from the right side list
and select Partner Determination Procedure Assignment (from left)
Now assign your sales type to Partner determination TA.
Create a SALES order you can find the sold to and ship to are editable.
Regards,
Mani

Sold to Party and Ship to party are in grey out mode in VA01.

Hi Friends,
I am facing a very critical situation, Please help me on this.
While creating the sales order by VA01, the Sold to Party and Ship to Party field are in grey out, so we cannot enter sold to party and ship to party. This is happening for all Order types.
And while checking the existing sales order by VA02, so I found that at Header level and Item level the Partner tab are disable
( mena partner tab are in grey mode,).
But when we click on sold to party field in VA02 it directly moves to partner but all Partner shown in Sales tab.
I have check all the partner function and partner determination configuration.
So can any one help me out in this, how in VA01 sold to party and ship to party field are in grey out mode.
How in VA02 the partner tab are disable.?
Thanks
Irfan Ullah
09370236510
Edited by: Lakshmipathi on Aug 4, 2011 4:30 PM
Thread Locked - Reason Cross Posted

Hai Irfan Ullah,
In Sales - customer
1. Partners are listed (SP,BP,PY, SH)for account group and Partner Determination procedure(TA) is assigned to it
Now for sales order type you need to assign the partner determination process
SPRO
Sales and Distribution
Basic Functions
Partner Determination
Set Up Partner Determination
Execute
Set Up Partner Determination for Sales Document Header
Select TA - standard order from the right side list
and select Partner Determination Procedure Assignment (from left)
Now assign your sales type to Partner determination TA.
Create a SALES order you can find the sold to and ship to are editable.
Regards,
Mani

SRW2008P - QoS Advanced Mode is greyed out

Similar Messages

Maybe you are looking for