SRW224G4 - can seem to reset, set to a bad address

Hello board members perhaps you may be able to offer some assistance with a strange issue I have come into. Small office, 11 machines, router is a RV016 and the swtich is a SRW224G4. Constant connection problems, dropping clients after a few days etc.
After invetigating the issue I find the switch is set to 10.1.1.255 and I cant access it at all. Got the console cable connected it and rebooted the switch, does come up with a few options like password reset but nothing along the lines of full reset.
I am really at loss and could use some help if you have any thoughts how I can either change or reset the ip.
Thanks in advance.

I believe there should be an opting for “Restore System Default Settings” under the category “System Configuration Menu” via the HyperTerminal. Try to look at this link so that you can be guided of the options:
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=16619&p_created=1212...

Similar Messages

Slaris 10 u6 auditing - pam_unix_cred: cannot set user audit Bad address

When I switch on auditing (execute /etc/security/bsmconv command), after rebooting system I cannot login to the system. When I try to login I can see the followin message:
pam_unix_cred: cannot set user audit Bad address
I have not idea, what to do

Thanks for this. Parent chmod o+x fixed it.

I found an old Apple id on a computer I use infreqently with an old Ipod. I have the the Applie ID, but I do not have the password. In addition,my email account has changed since I created this Applie ID. How can I get reset info to new email address?

I found an old Applie ID on a computer I use infreqently with an old IPod. I do not have the password for this AppleID. When I use the procedure to reset the password, I cannot receive the email as my email address has changed from the original used with the Apple ID. How can I get the reset information sent to my current email addres so I can establish a new passwod for this Applie ID?

FR Tecmobility is wrong, sure he means well but what he suggests will not work - signing out of iTunes Store and back in will have no effect on iCloud. Try the steps at iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
You may need to contact apple tech support if none of the password change methods work for you. Ask for Account Security. They will need to verify identity, to ensure you are who you claim to be. If that goes well, they can send a password rest e-mail to any e-mail you desigate, so make sure it is one you can access. Then reset the password. Then you can delete the iCloud account (needs the password to turn off find My Phone/Activation lock)
keep data on phone, then sign in with your desired apple ID. Good luck. hope you get this sorted out.

TS4006 I want to set up "find my ipad" on my sister's ipad, so we can find each other's iPads. However, this seems to require differing individual cloud email addresses, so one ipad wouldn't recognise the other one. How do I get round this?

I want to set up "find my ipad" on my sister's ipad, so we can find each other's iPads. However, this seems to require differing individual cloud email addresses, so one ipad wouldn't recognise the other one. How do I get round this?

Many thanks for the quick response.
I'm fine with using the same ID for iCloud, so I'll give that a try.
You mention that a lost ipad can be found from any computer. As a relative computer novice, I didn't know this. How would I go about carrying out such a search?
I don't think I'd use the find friends app. My concern is to find a lost or stolen ipad.
Thanks

I accidentally set a remote mac to "remote management" while screen sharing. Can I remotely reset it to screen sharing?

I accidentally set a remote mac to "remote management" while screen sharing. I did not realize that this set it to require the commercial Apple Remote Desktop application to get to it. Can I remotely reset it to screen sharing? It has disconnected me from accessing it using iCloud.

Good question, and I am not sure. I believe the remote login WAS checked, so if that is needed, I think that is a available, unless checking Remote Management unchecked Login.
I am not computer illiterate, but I am not a professional IT guy. I read about more subjects than I know. Back to My Mac should still be set up in iCloud and I have seen some discussion of using ssh with that, and I am gathering that you are talking about ssh when you talk of remote shell access?
Thanks.

HT5312 I don't have a rescue e-mail to reset my security questions, what can i do to set one or to reset the questions?

I don't have a rescue e-mail to reset my security questions, what can i do to set one or to reset the questions?
Every time i want to purchace something i have to answer these questions that i have forgotten !
Please help

If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

I've lost my password for my Airport, and cannot set up AppleTV without it. How can I either reset or recover the password?

I've lost my password for my Airport, and cannot set up AppleTV without it. How can I either reset or recover the password?

While you can reset your password, it might be wise to first check and see whether you can retrieve it, which will save you some time as far as setting up new connections on all of your devices with a new password.
On your iMac.....
Open Finder > Applications > Utilities > AirPort Utility
Click on the AirPort router icon, then click Edit in the smaller window that appears
Click the Base Station menu at the top of the screen....up where the other File, Edit, Window, and Help menus reside
Click Show Passwords

My daughter is using old round airport at college. I set it up without protection. I have an old iBook and I understand I can use that to set the passsword. But I can't seem to figure out where I can set the it?

My daughter is using old round airport at college. I set it up originally without password protection because my macbook was too new to recognize the old style airport. I have an old iBook and I understand I can use that to set the passsword. But I can't seem to figure out even using the Airport admin how to establish a password. Any suggestions? Thanks.

If it even has that built-in, you would configure it using Airport Utility. It would likely be in the Wireless configuration for first turning on security and then setting the required password. For Macs you should use WPA Personal if the option is present.

TS3988 i seem to have set up two different icloud accounts can someone tell me how to correct ?

I seem to have set up two different icloud accounts one on mac and one on my ipad newest one can someone tell me how to correct this?

Welcome to the Apple Community.
Choose which one you are going to use and delete the iCloud account from the other device, then log back in using the details of the account you wish to use.

Who can i make a set-reset flip-flop with labview interacting with for cycle outputs

Who can i make a set-reset flip-flop with labview interacting with for cycle outputs

Are you wanting a VI that emulates a RS filp flop, or do you have a question about using an actual one?
You can make a RS flip flop by knowing the 4 states:
R=0, S=0, Q=no change
R=0, S=1, Q=1
R=1, S=0, Q=0
R=1, S=1, Q=?(invalid condition)
I have attached a RS flip flop VI in LV version 6.0
dhuff
Attachments:
RS_Flip_Flop.vi ‏34 KB

Yesterday I used my iphone in the rain. I think some water must have got inside. Now the phone seems to be working OK but is not backlit so is incredibly hard to read. Is there anything I can do to reset or have I ruined the phone?

Yesterday I used my iphone in the rain. I think some water must have got inside. Now the phone seems to be working OK but is not backlit so is incredibly hard to read. Is there anything I can do to reset or have I ruined the phone?

What you should have done is immediately turn the phone off, then put it in a ziploc bag of dried rice after you wiped all visible moisture off the phone. Leave it in the ziploc bag for 3 ~ 4 days, then turn it on & hope things work OK. It may be too late to try the dry rice trick now, but you can give it a shot if you like.
Apple does have an out of warranty replacement program, cost in the US is $199 for the 4S & $149 for other models.

6th I can seem to choose what I want on my home screen? I have tried the reset still not giving me the options I have choosen

I have the 6th generation and I can seem to pick what I would like on the home screen . I would like voice memo and I can't access it now even though it is on?

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

Can't view the setting tab to edit

I have WRT54GS I can't view the setting tab to check or change. It seem the tabs are light in color and I click on them. I did have a virius which I got rid of. I have removed the linksys software and re installed it the same problem.

Let me know of which setting tab that you want to check or change? Secondly which Linksys software that you reinstalled… Once reset the Router, power cycle the whole network and reconfigure it … For the reconfiguration of the Router, let me know the name of the ISP (Internet Service Provider) or the connection type that you are using means it is a Cable Connection or DSL connection?
So if you have a DSL connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4020&userrole=Linksy...
So if you have a Cable Internet Connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
So after configuration check whether you can see the tab that you are looking for…

I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)

I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)
This is a section:
May 12 02:05:10 wendy-drapers-macbook configd[14]: setting hostname to "wendy-drapers-macbook.local"
May 12 02:05:29 wendy-drapers-macbook kernel[0]: Auth result for: 00:26:44:14:17:a3 MAC AUTH succeeded
May 12 02:05:29 wendy-drapers-macbook kernel[0]: AirPort: Link Up on en1
May 12 02:05:29 wendy-drapers-macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (192.168.1.92); network traffic reduction measures in effect
May 12 02:05:29 macbook configd[14]: setting hostname to "macbook.lan"
May 12 02:05:31 macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021E:C2FF:FEB3:1A3E); network traffic reduction measures in effect
May 12 02:05:34 macbook com.apple.launchd[1] (org.samba.nmbd): Throttling respawn: Will start in 5 seconds

I've been seeing messages exactly like that (and many, many other kinds) in the Console since the first version of OS X. They look menacing but are harmless.
You don't need any kind of security software.
Just surf the web carefully, pay attention to where you're going and don't install anything that you don't recognize. If you are asked to enter an admin user name and password, DON'T. Unless you know for sure that you initiated the installation from a known and reliable source (like Apple).
Mac malware relies on social engineering. No amount of security/anti-virus, blah, blah, blah software is going to help.

When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts. How can I change this setting?

When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts. How can I change this setting?

The only way that I know currently know of to remove old or incorrect email addresses from the Mail app is to reset the iPad back to factory defaults, which I assume that you don't want to to. You could try leaving feedback for Apple and maybe one day we'll day be able to edit them : http://www.apple.com/feedback/ipad.html#ipad

SRW224G4 - can seem to reset, set to a bad address

Similar Messages

Maybe you are looking for