SRW224G4 - Can't change port to PVE groupings

I have a Linksys SRW224G4. Two PVE groups are in use. However I can't change which PVE group a port is assigned to. The option to change the group is there but ghosted out and can't be selected.
I downloaded the user manual but it describes a web interface that looks slightly different than mine. For example it tells me to go to the Setup tab but I don't seem to have a Setup tab.
James

Dave,
You are trying to change the wrong port setting. Those you are describing are related to Incoming Servers and are changed in Mail Preferences/Accounts/Advanced -- those are NOT what you want.
Instead click open Mail Preferences/Accounts/Account Information, and click on the arrows beside the name of the Outgoing Server, then choose Edit Server List, and then select the Advanced tab and the smtp.mac.com there. You can then change to Port 587, for example.
Ernie

Similar Messages

Can't Change Port number on Mail account settings

I am trying to use Mac mail to read my .mac email. I can recieve messages but can't send them.
I have isolated the problem to the port number which is 993. The problem is I can't change it to 25 or to 587 which is what .mac recommends. If I uncheck "use ssl" the port number changes to 143 but I still can't change it.
I have tried every possible way to change the port but it will not allow me.

Dave,
You are trying to change the wrong port setting. Those you are describing are related to Incoming Servers and are changed in Mail Preferences/Accounts/Advanced -- those are NOT what you want.
Instead click open Mail Preferences/Accounts/Account Information, and click on the arrows beside the name of the Outgoing Server, then choose Edit Server List, and then select the Advanced tab and the smtp.mac.com there. You can then change to Port 587, for example.
Ernie

How can i change port No 1521 after installation

Dear all;
I have finished installing oracle database 10g, infrastructure 10g and BI 10g in one machine ,but after installation i found that the infrastructure use the same port 1521 of the database, and as a result the application server services not working like Forms, OC4j_bi_forms and report , so, how can change the port number after installation and how can i pass this problem during the installation??
Thanks

dear Mr.
actually after i installed the db10g and developer 10g and when I start the installation of the infrastructure I get the following message (that telling me that the port 1521 on my host is used by another product and if this port is being used by Oracle Network Service listener version 9.0.1 or higher, may I elect to continue the installation) , so I decide to continue the installation but after that I noticed that not all the oracle application server service not started and when I start forms as example may be the OC_4j_bi get down, and so onâ¦ and when I discuss this issue with another DBA he told me that this problem because of the using of the same port.
Finally i would like to solve this problem by any case even if i re-install the S/W again, but i'm afarid that i face the same problems.
Thanks

Can I change Port number?

During install NW2004s, I got error at the step Install Software Unit: "cannot establish connection with any of the available instances: MyHost:50004 Reason: Cannot open connection on host: 192.168.1.2 and port: 50004.
Are there any way that I can change the port 50004 to other number, because 50004 can not be accessed?
Thanks,
Mike

Hi,
Try this,
go /etc/host if you have unix level, then if you find that 50004 port, add a pound
sign "#" in the beginning... Continue your inst...
did you try to restart the installation?
Thanks,

Can the changing port be replaced

My 4 year old son decided to help charge my daughters 2nd gen iPod by shoving the lightening connector into the port over and over damaging and flattening all the pins. Is there anyway to replace the charging port? Or will apple fix it if I take it to an apple store? How much?

Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the connector for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Howeer, it may be better/less expensive to just purchase a used, newer model iPod

I can not sync my IPhone to My Imac. I have the latest version of ITunes on my Imac. I have tried reseting my phone (3), changing ports. Nothing works. I was thinking maybe my phone has the earlier version of ITunes but I can't update it.

I can not sync my IPhone to My Imac. I have the latest version of ITunes on my Imac. I have tried reseting my phone (3), changing ports. Nothing works. I was thinking maybe my phone has the earlier version of ITunes but I can't update it.

Did you already have a look at this article?
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Can't change printer port on Windows 8.1 and Server 2012 R2

1. Install "Lexmark X646e Class Driver" using a in-box print driver (i.e. one comes with the Windows installation base) .
2. Go to "Printer properties" -> "Port"
3. Select a custom monitor port, and the following error occurs in Event Viewer.
An error occurred while configuring print queue 'Lexmark X646e Class Driver'. Printer driver 'Lexmark X646e Class Driver' may not be used in conjunction with a non-inbox port monitor.
Same steps applied on Windows 8 and Server 2012, and not issues found. The restriction/limitation is newly added in Window 8.1 and Server 2012 R2.
Changing to a custom monitor port after printer driver installation is very important for us.
How can we solve or workaround the above issue, so it can behave like Windows 8 and Server 2012?

What Port Monitor just so I can bubble this information to some others?
Alan Morris Windows Printing Team
Hi Alan:
We developed a custom printing system, which involved the following configurations:
1. Create a custom port monitor on server 2012 r2.
2. Change an existing print queue to use this custom port monitor, and share this print queue.
3. All workstations will print to this shared print queue on the server.
The goal is to manage/monitor the print information in StartDocPort for all printing for instance. This is what we've been doing for a long time.
Now we upgraded our system from server 2012 to server 2012 R2, but we can't change the port monitor to our ones anymore.
I've tried the Type3 printer driver, such as Brother Color Type3 Class Driver, unfortunately it didn't work if the installation is using "Add a printer", and select the driver from the list.
The only way to make it work is to install the printer driver using the one downloaded from the vendor's website, this will bypass Windows "Add a printer".
Is there any chance we can make this to behave like server 2012 or earlier? Modify registry keys?
Cheers
Steven

Can't change my Port under preferences

For some reason.
I have chosen my server for outgoing mail, but when I go to advanced to type in the appropriate Port #, the number that is there is shaded and I can't type there. I click the SSL checkbox on and off and the port number changes but incorrectly both times.
Is there a way I can control what port I wanna send my mail through?
Thanks

You do not have to set up your mail again.
If you scroll down far enough in the screenshots it tells how to access
the smtp server settings.
NOT on the advanced tab, but under the 'account information' tab.
On the Outgoing Mail Server (SMTP) pop-up menu (close to bottom )select Edit Server List.
Result: The SMTP Server Options window opens. This window should let you change
the port smtp uses.
You are not trying to change the smtp port in the correct location if you are seeing the port number 143 was my point.

How can I change the port of a running database ?

Hi Friends,
on my laptop there is running a 9i DB with port 1521 and a 10gR2 DB with port 1521 also.
The tnsping on these db's is successfully and
with any tools I get the error : ORA-12505 .
How can I change a port number e.g. of the 10g DB ?
Thanks,
Friedhold

These tools you are talking about, did you configure the tnsnames for them?
If you plan to change the default listening port, you need to modify the listener.ora file under $ORACLE_HOME/network/admin
After 9i, Oracle has service registration
A feature by which the PMON process automatically registers information with a listener. Because this information is registered with the listener, the listener.ora file does not need to be configured with this static information.
You can try to run one listener, see if both instances can register themselves in even they are different versions.

Can I change of the port in J2EE

I am the beginner of J2EE, If I access the J2EE server, I need to type http://localhost:8000/
the port is 8000, can I use the other port instead of 8000, for example use the common port 80 instead of 8000

Yes, the port can be changed from J2EE_HOME/Config/web.properties
You have to change http.port line...

How can I change HTTP port in J2EE

Hi.
I installed Sneak Preview 640 and I want to change HTTP port for J2EE. (default port is 50000)
So, I started config tools and move to dispatcher -> service -> http -> port.
There is port information.
- Custom value : empty
- Default value : (Port:80,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:http)(Port:443,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:ssl)
My first question is that default port is "80" in above confirguration. Why we use "50000" ?
Second question is that I changed custom value but It doesn't work. How can I change HTTP port ?
Regards, Arnold.

you can use the "visual administrator" to set your http-port, too:
Dispatcher / Services / HTTP Provider / Ports
kr, achim

How i can change port that oracle web server listen on in 10gEx

Hi
Thank you for reading my psot
How i can change the port 8080 that oracle web server listen on it ?
I have other server listening on this port and i can not change that port.
I have oracle 10g Express edition

This question has been asked and answered several times in the XE forum. Feel free to join us in the XE forum at Oracle Database Express Edition (XE)
If you're not registered there, do so using http://www.oracle.com/technology/xe/registration
The answer is to use dbms_xdb's sethttpport procedure.

How can we change the default port 50000 of SAP WAS?

Hi,
1. How can we change the default port 50000 of SAP WAS?. Can we assign 8080?
2. Can we assign default context ("/") for the application we have developed?
Regards,
Sudheesh

Hi Sudheesh,
just refer this help..
http://help.sap.com/saphelp_nw04/helpdata/en/5b/82d3c3ee9691418e6b0281f933a37d/frameset.htm
U have to restart the sever after changing the port.
One more main thing here , no other services must not be using the port.
It will cause port binding exception.
Regards
Kishor Gopinathan

How can I change my TM disk in TC to a external HD?

I have a 1 TB time capsule and was used as time machine backup. But now as my iMac is running out of space, how can I change the disk in TC to be an external hard drive?
Plus, I want to set up the drive in the TC be use via wireless, like a share network drive. Is that possible?

how can I change the disk in TC to be an external hard drive?
Technically, you can't.
An external hard drive is defined as a drive that is attached directly to a computer by USB or FireWire connection.
The TC does neither of these things. It is a network drive that connects to the network via an Ethernet or wireless connection.
I want to set up the drive in the TC be use via wireless, like a share network drive. Is that possible?
Yes. I'm not recommending that you do this, but if you have another wireless router that is providing a wireless network, you can configure the TC using AirPort Utility to "join a wireless network".
In effect, the TC becomes a wireless hard drive in this type of setup. The Ethernet ports are not enabled in this type of configuration, so you cannot connect via Ethernet for a faster wired connection.

Re: if weblogic can serve two ports at the same time?

That's not true. WebLogic supports a non-secure and secure listener port at the
same time. That was one of the selling points for my organization.
Michael Girdley wrote:
If, you mean the same port on two different IP addresses, then the answer is
yes.
If, you mean two different ports on the same IP address, then the answer is
no.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
fxy <[email protected]> wrote in message
news:8fdk99$t9$[email protected]..
<URGENT QUESTION>
I'd like to know if weblogic can support two ports at the same time.
thank you in advance.
<URGENT QUESTION>

Well, the question was really meant to see if any change was made to WL to support
this, not because I didn't believe Michael Girdley.
P.S., this is something Websphere 4.0 let's you do...In case this encourages someone
to add this support.
"Mike Reiche" <[email protected]> wrote:
>
If you don't believe Michael Girdley, then I don't know why you would
believe anyone
else. I believe the answer is still 'no'.
Why do they 'have to be on different ports'? We block requests by URI
- so just
block all requests to /youradminapp/* at the firewall. Or you can block
them at
your Web Server. Or restrict them by user in WL.
Mike
you"Anil Arora" <[email protected]> wrote:
Is it still true that WL 6.0 cannot host multiple (non-secure) HTTPports
on one
server? We need this capability within one JVM to allow one web application
to
be accessed from one port while another through a second port. Forexample,
we
have a application to be exposed through the firewall at port 7001.
Then we have
another admin application to only be accessed within the firewall. But
they need
to be deployed within the same JVM since they may have shared statebetween
them.
Thanks,
Anil
"Michael Girdley" <[email protected]> wrote:
I'm sorry, to clarify my statement: I was speaking about nonsecure
communications. Weblogic can only support one listener port at a time.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Allen Akers <[email protected]> wrote in message
news:[email protected]...
That's not true. WebLogic supports a non-secure and secure listenerport
at the
same time. That was one of the selling points for my organization.
Michael Girdley wrote:
If, you mean the same port on two different IP addresses, then
the
answer is
yes.
If, you mean two different ports on the same IP address, then theanswer
is
no.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
fxy <[email protected]> wrote in message
news:[email protected]...
<URGENT QUESTION>
I'd like to know if weblogic can support two ports at the same
time.
thank you in advance.
<URGENT QUESTION>

SRW224G4 - Can't change port to PVE groupings

Similar Messages

Maybe you are looking for