SRW224G4 w/ vLan DHCP NAK responses for Macbook!

HI all,
After some wireshark, I see that when I have a vLan on the switch, only win7 gets IP, my macbook doesn't, sniffing to the bootp, I see that the DHCP sends NAK and after I only have DISCOVER & OFFER...
When I get the same switch and the same router and take out the vLan on the switch, everybody get an IP.
What's the deal with this switch and vLans and Mac OS x ???
Do I have to setup something else ?
cheers

DHCP NAK means the DHCP server is refusing to give an IP to the client. it might be that the client is requesting an already used IP, or is requesting an IP that does not fit within the scope defined for the VLAN or network the client is on. in any case, the NAK is not likely because of the the switch. check your dhcp server logs.

Similar Messages

VLAN & DHCP Server setup for voice & Data

We have a single SGE2010 in layer 3 mode switch with a Server 2008 DHCP server.
We will be implimenting a Voip netowork where the PC's connect to the voip phone. I would like to create another vlan - 10. I have created the vlan and assigned the IP on the swtich.
Routing seems to be working. I can ping both IP addresses of the switch on either vlan.
I cannot get DHCP working. In the SGE switch I have enabled DHCP Relay, enabled option 82, set my DHCP Interface as VLan1, and specified the DHCP servers IP address. On the ports I have set the port where the DHCP server connects to as a trunk port with Vlan 1 untagged and vlan 10 tagged. I have set the ports where the phones connect as a trunk port with vlan1 untagged and vlan 10 tagged.
The PC connected to the phone gets an IP from the DHCP server just fine.
The phone does not get an IP address
The scope has been set up on the server.
Any help is appreciated.
Thanks

Uh, I spent HOURS on this. I entered the interface for the DHCP server incorrectly. I thought you entered the interface the DHCP server was on.

VLAN DHCP Release not assigns dhcp ip for the first attempt

Hello,
I have a configured ISE with CWA enabled.
I have a DHCP Server provides auto ip from (vlan-2) to connect to my ISE and access to the Guest-Portal (that is a range from 192.168.2.0)
I have another DHCP Server which provides auto ip from another range (192.168.110.0) which is my Guest-VLAN
The issue we have is, while a guest user first connects to wifi, he gets an ip from my first-dhcp server (vlan-2) and is redirected to the Guest-Portal, but as soon as he enters his user-credintials he is connected to the Guest-VLAN as shown on my ISE and WLC reports,   but the User does not get Guest-VLAN-IP from dhcp server. unless he disconnects from the wifi and reconnect .
What can be the issue, why my users has to connect to the wifi twice to gets the guest vlan ip ?    althrough vlan dhcp replase option on my ise is correctly configured

Hi,
Can u check time and time zones on your switches are correctly configured? Are there any NTP Server?
And pls send "show version" printout...

WiSM having trouble getting the IP from service-vlan DHCP

WiSM WLAN Service Module WS-SVC-WISM-1-K9 in 6509e running VSS IOs s72033-ipservicesk9_wan-mz.122-33.SXI2a.bin having trouble to get the IP from service-vlan DHCP.
The pertinent config is as follows.
vlan 300
name WiSM_Service_Vlan
interface Vlan300
description *** WiSM Service-Vlan
ip address 192.168.200.1 255.255.255.0
ip dhcp excluded-address 192.168.200.1
ip dhcp pool WiSM_Service-Vlan_300
   network 192.168.200.0 255.255.255.0
   default-router 192.168.200.1
wism service-vlan 300
vlan 183
name WiSM_Management
interface Vlan183
description *** WiSM Management Vlan ***
ip address 10.39.139.254 255.255.255.0
wism switch 1 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 1 native-vlan 183
wism switch 1 module 4 controller 2 native-vlan 183
wism switch 2 module 4 controller 1 native-vlan 183
wism switch 2 module 4 controller 2 native-vlan 183
HO2NET0001#sh wism status
Service Vlan : 300, Service IP Subnet : 192.168.200.1/255.255.255.0
      WLAN
Slot Controller Service IP       Management IP    SW Version Status
----+-----------+----------------+----------------+-----------+---------------
20    1           0.0.0.0          0.0.0.0                      Service Port Up
20    2           0.0.0.0          0.0.0.0                      Service Port Up
HO2NET0001#sh module
Mod Ports Card Type                              Model              Serial No.
1    8 CEF720 8 port 10GE with DFC            WS-X6708-10GE      SAL13442Q5N
2    8 CEF720 8 port 10GE with DFC            WS-X6708-10GE      SAL13442GAL
3   48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX     SAL13410N8P
4   10 WiSM WLAN Service Module               WS-SVC-WISM-1-K9   SAD133101UY
5    5 Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL13442JE4
Mod MAC addresses                       Hw    Fw           Sw           Status
1 0025.84f1.55b8 to 0025.84f1.55bf   2.1   12.2(18r)S1 12.2(33)SXI2 Ok
2 0025.84f1.4e58 to 0025.84f1.4e5f   2.1   12.2(18r)S1 12.2(33)SXI2 Ok
3 0027.0da7.c240 to 0027.0da7.c26f   3.2   12.2(18r)S1 12.2(33)SXI2 Ok
4 0023.5e25.7168 to 0023.5e25.7177   2.3   12.2(14r)S5 12.2(33)SXI2 Ok
5 001f.9e2a.2608 to 001f.9e2a.260f   3.1   8.5(3)       12.2(33)SXI2 Ok
Mod Sub-Module                  Model              Serial       Hw     Status
1 Distributed Forwarding Card WS-F6700-DFC3C     SAL13442EG9 1.4    Ok
2 Distributed Forwarding Card WS-F6700-DFC3C     SAL13442H9T 1.4    Ok
3 Centralized Forwarding Card WS-F6700-CFC       SAL13442HU9 4.1    Ok
4 Centralized Forwarding Card WS-SVC-WISM-1-K9-D SAD133200D6 2.1    Ok
5 Policy Feature Card 3       VS-F6K-PFC3C       SAL13442E5S 1.1    Ok
5 MSFC3 Daughterboard         VS-F6K-MSFC3       SAL13421AJZ 2.0    Ok
Mod Online Diag Status
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
HO2NET0001#sh vlan
300 WiSM_Service_Vlan                active    Gi1/4/9, Gi1/4/10
The service IP is supposed to have been populated with an address from the dhcp pool. I am also unable to connect to it by doing a session switch 1 slot 4 processor 1. I get the following upon attempting to do so:
HO2NET0001##session switch 1 slot 4 proc 1
The default escape character is Ctrl-^, then x. You can also type 'exit' at the remote prompt to end the session Trying 0.0.0.0 ...
Any assistance or ideas offered will be greatly appreciated.
Thanks,

wired client is working & able to get IP from vlan 300 DHCP pool.
Here is the complete configuration.
Core-Switch6509#sh run
Building configuration...
Current configuration : 21462 bytes
upgrade fpd auto
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
service counters max age 5
hostname
boot-start-marker
boot system flash sup-bootdisk:
boot-end-marker
security passwords min-length 1
logging buffered 8192
no aaa new-model
ip subnet-zero
ip dhcp excluded-address 192.168.200.1 192.168.200.2
ip dhcp pool wism-service-port
   network 192.168.200.0 255.255.255.0
   default-router 192.168.200.1
ip dhcp pool voiceFLR1
   network 10.39.103.128 255.255.255.128
   default-router 10.39.103.254
   option 150 ip 10.39.139.240 10.39.139.241
ip dhcp pool voiceFLR2
   network 10.39.104.128 255.255.255.128
   default-router 10.39.104.254
   option 150 ip 10.39.139.240 10.39.139.241
ip dhcp pool voiceFLR3
   network 10.39.105.128 255.255.255.128
   default-router 10.39.105.254
   option 150 ip 10.39.139.240 10.39.139.241
no ip domain-lookup
vtp domain
vtp mode transparent
switch virtual domain 100
switch mode virtual
mls netflow interface
mls cef error action reset
spanning-tree mode pvst
spanning-tree extend system-id
wism service-vlan 300
wism switch 1 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 1 native-vlan 183
wism switch 1 module 4 controller 2 native-vlan 183
wism switch 2 module 4 controller 1 native-vlan 183
wism switch 2 module 4 controller 2 native-vlan 183
diagnostic bootup level minimal
redundancy
main-cpu
auto-sync running-config
mode sso
vlan internal allocation policy ascending
vlan dot1q tag native
vlan access-log ratelimit 2000
vlan 101
name Grd_FLR_Data_Vlan
vlan 102
name Grd_FLR_Voice_Vlan
vlan 103
name MZ_FLR_Data_Vlan
vlan 104
name MZ_FLR_Voice_Vlan
vlan 105
name 1st_FLR_Data_Vlan
vlan 106
name 1st_FLR_Voice_Vlan
vlan 107
name 2nd_FLR_Data_Vlan
vlan 108
name 2nd_FLR_Voice_Vlan
vlan 109
name 3rd_FLR_Data_Vlan
vlan 110
name 3rd_FLR_Voice_Vlan
vlan 111
name 4th_FLR_Data_Vlan
vlan 112
name 4th_FLR_Voice_Vlan
vlan 113
name 5th_FLR_Data_Vlan
vlan 114
name 5th_FLR_Voice_Vlan
vlan 115
name 6th_FLR_Data_Vlan
vlan 116
name 6th_FLR_Voice_Vlan
vlan 117
name 7th_FLR_Data_Vlan
vlan 118
name 7th_FLR_Voice_Vlan
vlan 119
name 8th_FLR_Data_Vlan
vlan 120
name 8th_FLR_Voice_Vlan
vlan 121
name 9th_FLR_Data_Vlan
vlan 122
name 9th_FLR_Voice_Vlan
vlan 123
name 10th_FLR_Data_Vlan
vlan 124
name 10th_FLR_Voice_Vlan
vlan 125
name Wireless_Users
vlan 126
name Wireless_Guest
vlan 150
name Printer
vlan 151
name v151
vlan 152
name v152
vlan 153
name v153
vlan 154
name v154
vlan 155
name v155
vlan 183
name Network_Management
vlan 300
name WiSM_Service_Vlan
interface Port-channel1
description *** For 1st Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel2
description *** For 2nd Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel3
description *** For 3rd Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel4
description *** For 4th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel5
description *** For 5th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel6
description *** For 6th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel7
description *** For 7th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel8
description *** For 8th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel9
description *** For 9th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel10
no switchport
no ip address
switch virtual link 1
mls qos trust cos
no mls qos channel-consistency
interface Port-channel11
description *** For 10th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel12
description *** For Ground Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel13
description *** For MZ Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel20
no switchport
no ip address
switch virtual link 2
mls qos trust cos
no mls qos channel-consistency
interface TenGigabitEthernet1/1/1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
shutdown
interface TenGigabitEthernet1/1/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
shutdown
interface TenGigabitEthernet1/1/3
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode on
interface TenGigabitEthernet1/1/4
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 2 mode on
interface TenGigabitEthernet1/1/5
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode on
interface TenGigabitEthernet1/1/6
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode on
interface TenGigabitEthernet1/1/7
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 5 mode on
interface TenGigabitEthernet1/1/8
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode on
interface TenGigabitEthernet1/2/1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 7 mode on
interface TenGigabitEthernet1/2/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 8 mode on
interface TenGigabitEthernet1/2/3
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 9 mode on
interface TenGigabitEthernet1/2/4
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 11 mode on
interface TenGigabitEthernet1/2/5
description *** Connected to Juniper Port Ten 0 Inside ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
interface TenGigabitEthernet1/2/6
no switchport
no ip address
interface TenGigabitEthernet1/2/7
no switchport
no ip address
interface TenGigabitEthernet1/2/8
no switchport
no ip address
interface GigabitEthernet1/3/1
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet1/3/2
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet1/3/3
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet1/3/4
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet1/3/5
switchport
switchport access vlan 154
interface GigabitEthernet1/3/6
switchport
switchport access vlan 154
interface GigabitEthernet1/3/7
switchport
switchport access vlan 154
interface GigabitEthernet1/3/8
switchport
switchport access vlan 154
interface GigabitEthernet1/3/9
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/10
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/11
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/12
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/13
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/14
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/15
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/16
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/17
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/18
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/19
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/20
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/21
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/22
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/23
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/24
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/25
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/26
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/27
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/28
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/29
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/30
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/31
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/32
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/33
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/34
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/35
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/36
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/37
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/38
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/39
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/40
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/41
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/42
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/43
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/44
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/45
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/46
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/47
switchport
switchport access vlan 107
switchport mode access
spanning-tree portfast edge
interface GigabitEthernet1/3/48
switchport
switchport access vlan 152
switchport mode access
interface GigabitEthernet1/5/1
no switchport
no ip address
shutdown
interface GigabitEthernet1/5/2
no switchport
no ip address
shutdown
interface GigabitEthernet1/5/3
no switchport
no ip address
shutdown
interface TenGigabitEthernet1/5/4
description *** Connected to CS-2 Port Ten 2/5/4 ***
no switchport
no ip address
mls qos trust cos
channel-group 10 mode on
interface TenGigabitEthernet1/5/5
description *** Connected to CS-2 Port Ten 2/5/5 ***
no switchport
no ip address
mls qos trust cos
channel-group 10 mode on
interface TenGigabitEthernet2/1/1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
shutdown
interface TenGigabitEthernet2/1/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
shutdown
interface TenGigabitEthernet2/1/3
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode on
interface TenGigabitEthernet2/1/4
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 2 mode on
interface TenGigabitEthernet2/1/5
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode on
interface TenGigabitEthernet2/1/6
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode on
interface TenGigabitEthernet2/1/7
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 5 mode on
interface TenGigabitEthernet2/1/8
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode on
interface TenGigabitEthernet2/2/1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 7 mode on
interface TenGigabitEthernet2/2/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 8 mode on
interface TenGigabitEthernet2/2/3
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 9 mode on
interface TenGigabitEthernet2/2/4
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 11 mode on
interface TenGigabitEthernet2/2/5
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface TenGigabitEthernet2/2/6
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface TenGigabitEthernet2/2/7
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface TenGigabitEthernet2/2/8
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet2/3/1
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet2/3/2
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet2/3/3
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet2/3/4
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet2/3/5
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/6
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/7
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/8
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/9
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/10
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/11
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/12
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/13
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/14
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/15
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/16
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/17
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/18
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/19
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/20
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/21
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/22
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/23
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/24
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/25
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/26
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/27
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/28
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/29
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/30
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/31
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/32
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/33
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/34
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/35
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/36
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/37
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/38
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/39
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/40
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/41
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/42
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/43
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/44
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/45
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/46
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/47
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/48
no switchport
no ip address
shutdown
interface GigabitEthernet2/5/1
no switchport
no ip address
shutdown
interface GigabitEthernet2/5/2
no switchport
no ip address
shutdown
interface GigabitEthernet2/5/3
no switchport
no ip address
shutdown
interface TenGigabitEthernet2/5/4
description *** Connected to CS-1 Port Ten 1/5/4 ***
no switchport
no ip address
mls qos trust cos
channel-group 20 mode on
interface TenGigabitEthernet2/5/5
description *** Connected to CS-1 Port Ten 1/5/5 ***
no switchport
no ip address
mls qos trust cos
channel-group 20 mode on
interface Vlan1
no ip address
interface Vlan101
description *** Grd Floor Data Vlan ***
ip address 10.39.101.126 255.255.255.128
interface Vlan102
description *** Grd Floor Voice Vlan ***
ip address 10.39.101.254 255.255.255.128
interface Vlan103
description *** MZ Floor Data Vlan ***
ip address 10.39.102.126 255.255.255.128
interface Vlan104
description *** MZ Floor Voice Vlan ***
ip address 10.39.102.254 255.255.255.128
interface Vlan105
description *** 1st Floor Data Vlan ***
ip address 10.39.103.126 255.255.255.128
interface Vlan106
description *** 1st Floor Voice Vlan ***
ip address 10.39.103.254 255.255.255.128
interface Vlan107
description *** 2nd Floor Data Vlan ***
ip address 10.39.104.126 255.255.255.128
interface Vlan108
description *** 2nd Floor Voice Vlan ***
ip address 10.39.104.254 255.255.255.128
interface Vlan109
description *** 3rd Floor Data Vlan ***
ip address 10.39.105.126 255.255.255.128
interface Vlan110
description *** 3rd Floor Voice Vlan ***
ip address 10.39.105.254 255.255.255.128
interface Vlan111
description *** 4th Floor Data Vlan ***
ip address 10.39.106.126 255.255.255.128
interface Vlan112
description *** 4th Floor Voice Vlan ***
ip address 10.39.106.254 255.255.255.128
interface Vlan113
description *** 5th Floor Data Vlan ***
ip address 10.39.107.126 255.255.255.128
interface Vlan114
description *** 5th Floor Voice Vlan ***
ip address 10.39.107.254 255.255.255.128
interface Vlan115
description *** 6th Floor Data Vlan ***
ip address 10.39.108.126 255.255.255.128
interface Vlan116
description *** 6th Floor Voice Vlan ***
ip address 10.39.108.254 255.255.255.128
interface Vlan117
description *** 7th Floor Data Vlan ***
ip address 10.39.109.126 255.255.255.128
interface Vlan118
description *** 7th Floor Voice Vlan ***
ip address 10.39.109.254 255.255.255.128
interface Vlan119
description *** 8th Floor Data Vlan ***
ip address 10.39.110.126 255.255.255.128
interface Vlan120
description *** 8th Floor Voice Vlan ***
ip address 10.39.110.254 255.255.255.128
interface Vlan121
description *** 9th Floor Voice Vlan ***
ip address 10.39.111.126 255.255.255.128
interface Vlan122
description *** 9th Floor Voice Vlan ***
ip address 10.39.111.254 255.255.255.128
interface Vlan123
description *** 10th Floor Voice Vlan ***
ip address 10.39.112.126 255.255.255.128
interface Vlan124
description *** 10th Floor Voice Vlan ***
ip address 10.39.112.254 255.255.255.128
interface Vlan150
description *** Printer Vlan ***
ip address 10.39.120.254 255.255.255.0
interface Vlan151
description *** Connected to Juniper FW Port Ten 0 ***
ip address 10.39.121.1 255.255.255.240
interface Vlan183
description *** Network Management Vlan ***
ip address 10.39.139.254 255.255.255.0
interface Vlan300
ip address 192.168.200.1 255.255.255.0
ip classless
ip route 0.0.0.0 0.0.0.0 10.39.140.169
ip route 0.0.0.0 0.0.0.0 10.39.121.14
no ip http server
no ip http secure-server
control-plane
dial-peer cor custom
line con 0
login local
line vty 0 4
login local
line vty 5 15
login local
mac-address-table aging-time 480
no event manager policy Mandatory.go_switchbus.tcl type system
module provision switch 1
slot 1 slot-type 227 port-type 60 number 8 virtual-slot 17
slot 2 slot-type 227 port-type 60 number 8 virtual-slot 18
slot 3 slot-type 147 port-type 61 number 48 virtual-slot 19
slot 4 slot-type 242 port-type 31 number 10 virtual-slot 20
slot 5 slot-type 254 port-type 31 number 2 port-type 61 number 1 port-type 60 number 2 virtual-slot 21
module provision switch 2
slot 1 slot-type 227 port-type 60 number 8 virtual-slot 33
slot 2 slot-type 227 port-type 60 number 8 virtual-slot 34
slot 3 slot-type 147 port-type 61 number 48 virtual-slot 35
slot 4 slot-type 242 port-type 31 number 10 virtual-slot 36
slot 5 slot-type 254 port-type 31 number 2 port-type 61 number 1 port-type 60 number 2 virtual-slot 37
end
Thanks & Awaiting for response.

Problem with battery for MacBook Pro 2007

I have a problem with battery that was replaced during video card service 1.5 years ago
Battery health was around 80% and it stopped to work, I continued to use notebook with power cable and after week the battery become like this!
spoke with person in Apple store and got answer that it is not covered by Apple and I will need to buy another new battery.
For me it looks like manufacturing problem and I'm not expecting that after 1 year my battery will die like this! Thanks that it didn't explode!
What I should do in such case?

Thanks for your reply!
All my battery story is ending with bad taste...
I always relied on quality of the Apple products, it brought me to change all computers and phones to Apple brand. I was ready to pay extra for their products...
This battery has an Apple brand on it and I'm expecting that Apple will take some responsibility for it.
First battery on my MacBook Pro 2007 worked without any problem for 4 years, then it was replaced by Apple service tech person for unknown reason. This "new" battery failed just after ending of 1 year warranty coverage and even deformed in such scarry way. And now I don't have any option to ask if there is possibility that I'm experience a manufacturing defect! And I know that it is possible, internet is full of negative comments for these batteries!
Now I'm asking myself again, if it worst to buy Apple products? Are these products have proper quality?

Vlans dhcp status are not received

Hello,
I am configuring vlan on sg300-20 in dhcp mode.
One vlan that is directed connected to the adsl router get ip address and when I connect host to the ports in this vlan they also receive ip address and can go on internet.
The other four vlans dhcp status are not received.
Kindly help me check this. Thanks
Below is the config log:
switch4ba497#sh running-config
config-file-header
switch4ba497
v1.2.9.44 / R750_NIK_1_2_584_002
CLI v1.0
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
vlan database
vlan 5,10,20,30,40
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp relay address 192.168.3.1
ip dhcp information option
no boot host auto-config
bonjour interface range vlan 1
hostname switch4ba497
line telnet
exec-timeout 0
exit
no passwords complexity enable
username cisco password encrypted 7af78c911d5b48bea1dc2449d9d89513abeb4be5 privilege
15
ip http timeout-policy 0 http-only
ip name-server 192.168.1.1 192.168.3.1
ip telnet server
interface vlan 1
ip address 192.168.2.254 255.255.255.0
no ip address dhcp
interface vlan 5
name WAN
ip address dhcp
interface vlan 10
name Studio
ip address dhcp
interface vlan 20
name Service
ip address dhcp
interface vlan 30
name Admin
ip address dhcp
interface vlan 40
name Data
ip address dhcp
interface gigabitethernet1
switchport mode access
interface gigabitethernet2
switchport mode access
switchport access vlan 10
interface gigabitethernet3
switchport mode access
switchport access vlan 10
interface gigabitethernet4
switchport mode access
switchport access vlan 10
interface gigabitethernet5
switchport mode access
switchport access vlan 10
interface gigabitethernet6
switchport mode access
switchport access vlan 10
interface gigabitethernet7
switchport mode access
switchport access vlan 10
interface gigabitethernet8
switchport mode access
interface gigabitethernet9
switchport mode access
switchport access vlan 20
interface gigabitethernet10
switchport mode access
switchport access vlan 20
interface gigabitethernet11
switchport mode access
switchport access vlan 20
interface gigabitethernet12
switchport mode access
switchport access vlan 20
interface gigabitethernet13
switchport mode access
switchport access vlan 30
interface gigabitethernet14
switchport mode access
switchport access vlan 30
interface gigabitethernet15
switchport mode access
switchport access vlan 30
interface gigabitethernet16
switchport mode access
switchport access vlan 30
interface gigabitethernet17
switchport mode access
interface gigabitethernet18
switchport trunk native vlan 40
interface gigabitethernet19
switchport mode access
switchport access vlan 5
interface gigabitethernet20
switchport trunk native vlan 5
switch4ba497#sh ip int
    IP Address         I/F       Type     Directed   Precedence   Status
                                          Broadcast
0.0.0.0/32          vlan 10   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 20   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 30   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 40   DHCP        disable    No         Not
                                                                received
192.168.2.254/24    vlan 1    Static      disable    No         Valid
192.168.3.102/24    vlan 5    DHCP        disable    No         Valid
switch4ba497#
Also i do not understand why the ip address is 0.0.0.0/32 because the dhcp server ip address is 192.168.3.1

Dear Customer,
Thank you for reaching Small Business Support Community.
In Layer 2 system mode, only the management VLAN can be configured with a static or dynamic IP address. In Layer 3 system mode, all the interface types (ports,LAGs, and/or VLANs) on the device can be configured with a static or dynamic IP. Configuring the device to work in either mode is performed in the Administration >System Settings page
When a DCHP Client starts a discovery process, it assigns a dummy IP address 0.0.0.0 before the real address is obtained. This dummy address has the status of “Not Received”.
Pretty much your problem should be solved by changing to Layer3 system mode. Please let me know if anything comes up and/or if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

WLC 5508 Flexconnect dhcp request landing on wrong vlan/dhcp pool

Hi,
We've recently setup our 5508 to work with Flexconnect. The 5508's run on 8.0.100, they are setup redundant. On the remote site we've setup a local dhcp pool for the various WLAN's/VLAN's. The AP's have registered with the WLC succesfully.
We then setup the flexconnect groups, added the ap's and configured 1 vlan mapping to it's corresponding wlan id. Alsio setup the wlan, made it so it's using flexconnect, bound it to the interface which will allow it to reach the local dhcp machine.
User can see the SSID, can login using the password, but they are awarded an ip addres from a different dhcp pool, meant for antoher vlan than the bonding in the flexconnect group is indicating.
When I check the local dhcp pool for bindings on the mac address of a machine I can see multiple bindings. At 1 point I had 3 bindings in different pools, 1 on the native vlan for the AP, 1 on the vlan it should have and 1 on another vlan which wasn't configured anywhere in the flexconnect setup.
Does anybody have a clue how and why this is happening?

Just to add to Salma... All your AP's in FlexConnect are most likely connected to a trunk port. Make sure the native Vlan is defined and the vlan's are allowed on the trunk port. Then you need to verify that the AP's native Vlan and WLAN to Vlan mappings are correct. Seems like you might have some AP's that are not defined properly and that's why users that connect to a WLAN is getting in the wrong subnet.
Scott

RECOVERING FORGOTTON ADMINISTRATOR PASSWORD FOR MACBOOK PRO WITH OS MOUNTAIN LION REQUIRES (A) OPTICAL DISK READER or (B) ANOTHER COMPUTER. I HAVE NONE OF THE TWO. I HAVE BEEN ABLE TO LOGIN TO APPLE SUPPORT AND COMMUNITIES. NO SOLUTION IS AVAILABLE

RECOVERING FORGOTTON ADMINISTRATOR PASSWORD FOR MACBOOK PRO WITH OS MOUNTAIN LION REQUIRES (A) OPTICAL DISK READER or (B) ANOTHER COMPUTER. I HAVE NONE OF THE TWO. I HAVE BEEN ABLE TO LOGIN TO APPLE SUPPORT AND COMMUNITIES. NO SOLUTION IS AVAILABLE

Terribly sorry Joseph Kriz. I had absolutley no intention of annoying anyone. This was the first time I have been communicating in a discussion group, and as I wrote my comments I had no idea how my typing would reflect and where my question would be going. Hope my unintentional typing will be forgiven and causes no further agitation.The only additional comment I can make on your response is that "I do not use capital letters or CAPS LOCK while I try to enter my administrator password". Thank you for guiding me

What anti-virus is the most recomended for MacBook?

Hi, I have a cuestion. What anti-virus is the most recomended for MacBook?

pablo.asz wrote:
... But the true is that exist virus and I wish to know what is the best protection.
OS X already includes everything it needs to protect itself from viruses and malware. Keep it updated with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

Add switchports to new VLAN/DHCP pool

Hello community,
Our company recently added a new VLAN/Subnet/DHCP pool to seperate the physical workstations. I updated a few interfaces to the new VLAN...which is fine for testing a few workstations, however what is the best approach and least disruptive way to update a range of ports to the new VLAN/DHCP pool.
Can we update the Interfaces to the new VLAN with the range command.....let the current DHCP lease expire and then they would get an ip from new Pool? Should we lower the lease time on old pool? ...I think it is currenty set to 24hr (default)
Please include IOS commands
Much appreciated!

Hello,
Create the new DHCP pool on your DHCP server, and lower the lease time of old pool, after pcs are get the new ip addresses, create a new vlan and assign the ports to this vlan.
ip dhcp pool OLDPOOL
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
ip dhcp pool NEWPOOL
network 192.168.2.0 255.255.255.0
default-router 192.168.2.1
interface range f0/1 - 24
switchport mode access
switchport access vlan 1

Curious - frequency response of MacBook sound?

Hi - not a complaint - I'm just curious - I kinda like the way my MacBook deals with audio using the internal speakers - it seems to do a good job of getting the point across with limited resources.
Does anyone know what the frequency response for the MacBook is or where I could find a freq response curve for it?

Look here.

MAXIMUM RAM for MacBook Pro Core 2 Duo Mid 2010

What is the MAXIMUM RAM for MacBook Pro, 2.4 GHz Intel Core 2 Duo, Mid 2010 - 24MC374LL/A, running OS X 10.8.2 (12C60)?
I tried to search for this but was unable to find anything.
Apple Specs say 8GB, but I was just told by someone I THINK would know, that you can actually go up to 16GB.
This would be an enormous improvement to my workflow if true.
Anyone out there know for certain?
Making sure before I buy (or NOT!)
Thanks.
Jerry G

I just found this post and I realize this is a late response but maybe it will help others.
Based on recent circumstances I just happened to have two 8GB DDR3 modules collecting dust. Having an old trusty MacMini as my media center, server among other things and whatnot, I was curious if I could bump this little thing to 16GB. In doing so I found this post and verified with OWC.
End result:
Booted with no issues, and is running nice and smooth. Should be noted that just adding 16GB of RAM to a Core 2 Duo will not make the machine lightning fast or become some amazing computing platform. It will just make the box run a bit quicker and give you the ability to have more applications open before you begin to note some lag.
However this is really nice to see:

DHCP lease issue for PPPoA sessions when using external DHCP server

We used to use the Cisco 7206VXR's DHCP server to hand out leases, and when we lost several hundred customers on a link, the router was able to get them up and connected with an IP address within minutes.
We switched over to using an external DHCP server so we could have more control over some extended DHCP options, as well as to aggregate all our DHCP traffic. Now, if we lose 100 DSL customers all at once, it takes 90 minutes for them to come up again. They come in a few at at time, until all 100 are back.
We see waves of RADIUS auth's in our RADIUS log (RADIUS has always been handled externally, so nothing changed there), and continuous streams of DHCP requests come in and DHCP offers go out. What seems to be happening is that a whole bunch of modems auth with RADIUS, request IP addresses, but for whatever reason, timeout when they don't all get their lease, drop the connection, and retry the whole process all over again. We purchased a dedicated DHCP server, thinking that was the bottleneck, but performance is about identical.
Here's our config:
interface Virtual-Template1
ip unnumbered Loopback11
ip helper-address a.b.c.d
peer default ip address dhcp
ppp authentication pap
ppp ipcp dns a.b.c.d e.f.g.h
ppp ipcp unique-address
My questions are:
- is there any performance issue with using an external DHCP server and PPPoA
- is there anything in our config that would cause such delays
Frank

GP:
No, the DHCP server is not across a WAN link; there is only a 10/100 switch in between the router and the DHCP server. There are no dropped packets on the interface.
I ended up opening a case with TAC about this issue. While I had the helper address configured in the template, TAC recommeneded that I specify the actual DHCP server with the command "ip dhcp-server x.x.x.x". This eliminates the DHCPBROADCAST (which I've verified). Perhaps the DHCP relay portion of the Cisco router is performed serially, instead of in parallel. By that, I mean, the next DHCPBROADCAST won't go out until there is the response for the first DHCPBROADCAST.
I'll know in a few days when we test again.
Frank

HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

mini graphics to vga adapter for macbook how to install in windows 7.
i have macbook with windows 7 operating system.

Can you be more specific?
What are you trying to do?

The normal value of battery capacity for macbook pro

Hi there,
I noticed my battery full charge capacity value is way below the technical specification from Apple.
For macbook pro 15" early 2011 version a 77.5W battery is built-in.
However, so far after 4 cycle, my full charge capacity is 6913mAh.
It seems that I missed something. Though I didn't really notice the initial value when it's brandnew.
Statistically what's the average value of the new battery will be ? around 75W or 7500mAh? Any idea?

Best battery info resource is here:
https://discussions.apple.com/thread/1764220?threadID=1764220

SRW224G4 w/ vLan DHCP NAK responses for Macbook!

Similar Messages

Maybe you are looking for