SRW224G4P - " ERR Runtime Loading Fail - System Halt"

Hello everyone!
When I power up my switch (SRW224G4P), hyperterminal displays the following output:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
* the screen then clears and displays *
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
<ERR> Runtime Loading Fail - System Halt.
* no "auto-boot in 2 second" message is displayed *
Does anyone have any ideas what can be done to fix this error?
Message Edited by Vince_02 on 12-14-2009 10:52 AM

The SRW is now part of Cisco Small Business. You better ask your question in the Cisco Small Business Support Community. You'll find Cisco people over there...

Similar Messages

SRW248G4P - (!)Loader Binary checksum error - ERR Runtime Loading Fail - System Halt.

We have this 48 port switch in our engineering department, and it basically stopped passing network traffic.
When connecting to the Console port and power cycling the switch, this is what I see:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
(!)Loader Binary checksum error
<ERR> Runtime Loading Fail - System Halt.
This error obviously doesn't look "normal".
When pressing CTRL-U, I get the following screen:
File Name                         S/Up Type Size       Create Time
$logfile_1                          0    3         64 1193046:28:15
Factory_Default_Config.cfg          0    5        354 24:01:02
SRW224G4P_SRW248G4P_boot.bix        1    1    1377600 00:01:03
certificate                         0    8      18040 24:00:56
startup-config                      1    5       5651 25:00:38
startup1.cfg                        0    5       5537 24:01:14
Free Space : 5636096
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
I've tried to update the "SRW224G4P_SRW248G4P_image_v1310.bix" file using Xmodem download, but since I really wasn't sure how to use this boot loader tool, I haven't been successful at doing that, nor do I even know if that's the solution for the problem that I'm having.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 7289
Bytes Received = 394480
Errors:
        Checksum   = 0
        Complement = 0
        Duplicates = 0
Image downloaded to buffer.
        [R]untime
        [D]iagnostic
        M[u]ltipe Image
        [L]oader (Warning: Are you sure what you are doing?)
        [Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1310.bix
Updating file system.
File system update fail.
I'm guessing that I'll need to contact Cisco tech support, although at least through their web site, they make that nearly impossible to accomplish.
Does anyone have any suggestions on what may have happened to our switch and what I should do to recover? Of course we're about to start a time-critical round of product testing, and without this switch, I'm dead in the water. And it's not like we have a spare 48-port PoE switch lying around.

Hello,
I got the same issue. After downloading and uploading the firmware, I got the following result and all LED on the switch are glowing. Could you please help on this issue? Where can I find the right firmware. I also have Image loader 1.0.1.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 6b59
Bytes Received = 35ac80
Errors:
        Checksum   = 0
        Complement = 0
        Duplicates = 0
Image downloaded to buffer.
        [R]untime
        [D]iagnostic
        M[u]ltipe Image
        [L]oader (Warning: Are you sure what you are doing?)
        [Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1020.bix
Updating file system.
File system update fail.
File Name                         S/Up Type Size       Create Time
All I got now after restarting the switch is:
File Name                         S/Up Type Size       Create Time
Factory_Default_Config.cfg          1    5        354 24:01:02
certificate                         0    8      18040 24:00:56
Free Space : 7602176
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
Thnx in advance.

Compaq mini 700 model 735ED windiws 7 password check failed system halted CNU91453V3

Ciao sono nuovo nella comunita ,e non so ancora bene come funziona.
ma come o gia detto o un compaq mini 700 model 735ED con windiws 7 e ho acceso stamattina e sulla schermata nera mi diceva di inserire la password al bios ,(non so se ci ha messo le mani mio figlio ma e strano) quindi dopo vari di inserimenti password mi dice " password check failed system halted CNU91453V3" vi prego aiutatemi

Hi,
Please see the reply on your earlier thread on the following link.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-mini-compaq-700/m-p/4491550#...
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Z61t - Integrity check for code area failed system halted

Saw the post for the T series which recommended to downgrade bios to 2.23.
Having this issue with the Z61ts since January 4, 2010.
-Docked and undocked
-With and without the network cable plugged in
-With and without peripherals plugged in
-Bios 2.26 and 2.27,
-SafeGuard Easy 4.3 and 4.5.2.
In some cases restoring the SafeguardEasy Kernel fixes the issue. In some cases the error reappears and either the kernel needs to be restored again, or the PC can just be rebooted. One case had 2 kernel restores, a reimage and a kernel restore.

^ Same problem here.
How long it takes to create new fixed Bios-software.?
Moderator edit: Thinly disguised profanity removed. Please stick to the Community Rules.

Enter current password: system halted

My hp compaq mini show enter current password, after pressing enter 3 time it show password check failed system halted. CNU937B5BL, pls somebody help. ..

Hi,
Try entering: e9lofxpqpk ( Note that the 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Password Check Failed, Fatal Error, System Halted, CNU949701P

Hello!
I have a HP netbook model Mini CQ 10, and I have not switched it on in a while.
I recently went to turn it on to recover some important documents and this error message shows up;
Password check failed
Fatal Error... System Halted
CNU949701P
Canu anyone PLEASE HELP ME! I would be so grateful!
Thank you!
x
This question was solved.
View Solution.

Try >> e9lovox132
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

SQORA32 driver could not be loaded. System error 1114: A dynamic link library (DLL) initialization routine failed

I have an MS Access 2013 application that opens a connection to an Oracle database via an Oracle client.
On occasion the application returns the following error when the ODBC connection is opened:
Specified driver could not be loaded due to system error
1114: A dynamic link library (DLL) initialization routine failed. (Oracle in OraClient11g_home1, C:\oracle\product\11.2.0\client_1\SQORA32.DLL).
This is an intermittent problem that is reproducible on several workstations (all running Windows 7 x64 with 32-bit version of Office 2013 and 32-bit Oracle client 11.2.0).
Many times the ODBC connection is established without a problem
Other times the connection can be established by closing then re-opening the application once
Other times closing the re-opening the application several times does not help
The same application is being run on several workstations and not every user experience the problem at the same time. The problem may be chronic for one user whereas another user experiences no problem whatsoever.
All of the posts I have seen concerning this issue are for a persistent problem opening a connection and not an intermittent one. I am at a loss of how to diagnose this problem and would appreciate some direction.

Hi Ross,
This error message is Microsoft Data Link Error, this error occurs on windows when attempting to start a service or load a system driver but the DLL you loaded or one of its dependencies returned FALSE. It typically point to a system DLL file which is located
in system32 and can be fixed by using the System File Checker tool. In your case, I suspect that it occurs due to a calling failure connecting to ODBC driver and it pointed to an error link C:\oracle\product\11.2.0\client_1\SQORA32.DLL which is hosted by oracle.
If they are analogous, a “repair” seems to be helpful, However since we are not expert about oracle program I‘d suggest you check if C:\app\Oracle\BIN\SQORA32.DLL file exists on your machine and contact with Oracle first, I think there you can get more effective
suggestion by other experts who familiar with design of Oracle database. Your understanding is highly appreciated.
By the way, I searched for you and seems like you are not alone about this issue.
https://community.oracle.com/thread/2301119
https://communities.sas.com/message/118002
http://forums.networkautomation.com/forum/messageview.cfm?catid=50&threadid=11611
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

What does this mean? Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.

This is the error that we get when we run the Tag File.
ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
What does it all mean?

ACRE,
this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
Two checks I have in mind.
- Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
- Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
Roland

0orgunit_att full load failed

The full load failed. when i analyzed the error is job terminated in source system
i checked the job overview in source system and there is a dump.
the dump is
Runtime Errors         ITAB_DUPLICATE_KEY
Date and Time          02.02.2009 08:44:59
Short text
     A row with the same key already exists.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLHRMS_BW_PA_OS" had to be terminated because it
      has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An entry was to be entered into the table
      "\FUNCTION=HR_BW_EXTRACT_IO_ORGUNIT\DATA=MAIN_COSTCENTERS[]" (which should
have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key.
to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ITAB_DUPLICATE_KEY" " "
"SAPLHRMS_BW_PA_OS" or "LHRMS_BW_PA_OSU06"
"HR_BW_EXTRACT_IO_ORGUNIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
please suggest <removed by moderator>.
pramod
Edited by: Siegfried Szameitat on Feb 2, 2009 11:06 AM

Hi asish,
Runtime Errors         ITAB_DUPLICATE_KEY
Date and Time          02.02.2009 06:18:44
   180                i0027_flag         = ' '
   181                ombuffer_mode      = ' '
   182            TABLES
   183                in_objects         = in_objects
   184                main_costcenters   = main_co
   185            EXCEPTIONS
   186                OTHERS             = 0.
   187
   188
>>>>>         INSERT LINES OF main_co INTO TABLE main_costcenters.
   190
   191         last_plvar = orgunits-plvar.
   192         REFRESH in_objects.
   193         MOVE-CORRESPONDING orgunits TO in_objects.
   194         APPEND in_objects.
   195       ENDIF.
   196
   197     ENDLOOP.
   198   ENDIF.
   199
   200   LOOP AT orgunits.
   201
   202     CLEAR:   infty1000, main_co, infty1008, l_t_hrobject.
   203     REFRESH: infty1000, main_co, infty1008, l_t_hrobject.
   204
   205     APPEND orgunits TO l_t_hrobject.
   206
   207     LOOP AT l_t_i1000_all INTO infty1000 WHERE objid = orgunits-objid.
   208       APPEND infty1000.
i checked this this reflects a structure. i cannont modify as this is standard table.
pramod

ERR Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install

==============>deploy log information:
2015-04-27_14-50-42:INFO:Install Args AGENT_PORT=3872
2015-04-27_14-50-42:INFO:Action description 在主机 expquery03 上执行命令 /bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872'
2015-04-27_14-50-42:INFO:Attempt :1 pty required false with no inputs
2015-04-27_15-11-47:INFO:/bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872' execution failed on host expquery03
2015-04-27_15-11-47:INFO:Pattern ERROR: found in file /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log Line ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO:Error Message found Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: ACTION 在主机 expquery03 上执行命令 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872
2015-04-27_15-11-47:INFO: OUT null
2015-04-27_15-11-47:INFO: ERR Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: EXIT CODE1
2015-04-27_15-11-47:INFO:InvocationTargetException Exception
2015-04-27_15-11-47:INFO:Printing Exception :java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.executeActions(BaseDeployerOps.java:1924)
        at oracle.sysman.core.agentpush.ui.deployer.NewAgentDeployer.deploy(NewAgentDeployer.java:59)
        at oracle.sysman.core.agentpush.ui.deployfwk.DeploymentWorker.run(DeploymentWorker.java:26)
        at oracle.sysman.util.threadPoolManager.WorkerThread.run(Worker.java:311)
Caused by: CommandException: err: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install. out: null exitcode: 1
stacktrace:
null
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1204)
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1050)
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:644)
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:593)
        at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.doInstall(BaseDeployerOps.java:484)
oem@oragc12c bin]$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log: No such file or directory
[oem@oragc12c bin]$ more /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log
-e Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /u01/app/agent_12c/core/12.1.0.4.0/jdk/bin/java -classpath /u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar oracle.s
ysman.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c -prereq
Validating oms host & port with url: http://oragc12c.yto.net.cn:4903/empbs/genwallet
Validating oms host & port with url: https://oragc12c.yto.net.cn:4903/empbs/genwalletReturn status:3-oms https port is passedUnzipping the agentcoreimage.zip to /u01/app/agent_12c ....12.1.0.4.0_PluginsOneof
fs_197.zip
Executing command : /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/unzip -o /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/12.1.0.4.0_PluginsOneoffs_197.zip -d /u01/app/agent_12cExecuting command : /u01/
app/agent_12c/core/12.1.0.4.0/jdk/bin/java -d64 -classpath /u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/xmlparserv2.jar:/u01/app/agent_12c/core/12
.1.0.4.0/oui/jlib/srvm.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/emCfg.jar:/u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/share.jar oracle.sysman
.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c /u01/app/agent_12c/agent_inst AGENT_BASE_DIR=/u01/app/agent_12c
Failed to read the inventory
Failed to read the inventory=====================>but the inventory no problem
Cloning the agent home...
Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs   -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.0   AG
ENT_BASE_DIR=/u01/app/agent_12c ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=f
alse b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872 -noconfig ORACLE_HOME_NAME=agent12c1 -force b_noUpgrade=true
ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
Agent Deploy Log Location:/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
============>agent client privage and "/tmp" information at hp-unix
$ bdf
Filesystem          kbytes    used   avail %used Mounted on
/dev/vg00/lvol3    5242880 384784 4820160    7% /
/dev/vg00/lvol1    1835008 376272 1447400   21% /stand
/dev/vg00/lvol7    20971520 8977200 11902024   43% /var
/dev/vg00/lvol9    7864320 3213136 4614904   41% /usr
/dev/vg00/lvol6    85983232 63055260 21527575   75% /u01
/dev/vg00/lvol5    10485760 2268216 8153768   22% /tmp===============>
/dev/vg00/lvol8    10354688 6536024 3788952   63% /opt
/dev/vg00/lvol4    52428800 13319488 38803816   26% /home
$ ls -lt
total 6
drwxr-xr-x   2 oem        oinstall      1024 Apr 27 15:14 agent_12c
drwxrwx---   5 grid       oinstall      1024 Apr 27 15:11 oraInventory
drwxr-xr-x   3 oem        oinstall        96 Apr 22 16:16 agent
drwxrwxr-x   8 grid       oinstall      1024 Apr 21 14:58 grid
drwxrwxr-x   6 grid       oinstall        96 Aug 7 2013 oracle
drwxr-xr-x   3 root       oinstall        96 Aug 2 2013 11.2.0
$ cd oraInventory
$ ls -lt
total 44
drwxrwx---   2 grid       oinstall     16384 Apr 27 15:10 logs
drwxrwx---   3 grid       oinstall      2048 Apr 22 10:36 backup
drwxrwx---   2 grid       oinstall      1024 Apr 3 2014 ContentsXML
-rwxrwx---   1 grid       oinstall      1686 Aug 6 2013 orainstRoot.sh
-rw-rw----   1 grid       oinstall        56 Aug 6 2013 oraInst.loc
$ cd ContentsXML
$ ls
comps.xml      inventory.xml libs.xml
$ ls -lt
total 6
-rw-rw----   1 grid       oinstall       842 Apr 21 10:31 inventory.xml
-rw-rw----   1 grid       oinstall       329 Apr 20 17:32 comps.xml
-rw-rw----   1 grid       oinstall       292 Apr 20 17:32 libs.xml
I view some oms document ,don't know the case

agent client's apeloy log:
$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_16-22-23-PM.log
INFO: /u01/app/agent_12c/core/12.1.0.4.0
INFO: /u01/app/agent_12c/ADATMP_2015-04-27_15-33-29-PM
INFO: /u01/app/agent_12c
INFO: /u01/app/agent_12c/agent_inst
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: -ignorePrereqs
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: Setting the system property ORACLE_HOSTNAME to:expquery03
INFO: Setting the system property oracle.installer.oui_loc to:/u01/app/agent_12c/core/12.1.0.4.0/oui
INFO: Agent Base Directory is : /u01/app/agent_12c
INFO: Agent Home is : /u01/app/agent_12c/core/12.1.0.4.0
INFO: Sbin Home is : /u01/app/agent_12c/sbin
INFO: Logs Location is : /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy
SEVERE: User has specified -ignorePrereqs when invoking the installer. All pre-requisite checks will be ignored for this installation session. Configuration failures may result if proper pre-requisites are
not satisfied.
INFO:
Setting system property CUSTOM_INVENTORY to /u01/app/oraInventory
INFO: Clone start time:2015-04-27_16-22-24-PM
INFO: Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs   -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.
0   -noconfig ORACLE_HOME_NAME=agent12c1 -force
INFO: Starting Oracle Universal Installer...
INFO:
INFO: Checking swap space: must be greater than 500 MB.   Actual 61440 MB    Passed
INFO: Preparing to launch Oracle Universal Installer from /tmp/OraInstall2015-04-27_04-22-24PM. Please wait ...Oracle Universal Installer, Version 11.1.0.12.0 Production
INFO: Copyright (C) 1999, 2014, Oracle. All rights reserved.
INFO:
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO:   at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO:   at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO:   at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO:   at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO:   at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO:   at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: OUI-10053:Unable to generate temporary script: /tmp/orainstRoot.sh. Unable to continue install.
INFO: SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
INFO: Plugin homes:
INFO:
INFO: LD_LIBRARY_PATH environment variable :
INFO: -------------------------------------------------------
INFO: Total args: 42
INFO: Command line argument array elements ...
INFO: Arg:0:/tmp/OraInstall2015-04-27_04-22-24PM/jre/bin/java:
INFO: Arg:1:-Doracle.installer.library_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui/lib/hpia64:
INFO: Arg:2:-Doracle.installer.oui_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui:
INFO: Arg:3:-Doracle.installer.bootstrap=TRUE:
INFO: Arg:4:-Doracle.installer.startup_location=/u01/app/agent_12c/core/12.1.0.4.0/oui/bin:
INFO: Arg:5:-Doracle.installer.jre_loc=../../jre:
INFO: Arg:6:-Doracle.installer.nlsEnabled="TRUE":
INFO: Arg:7:-Doracle.installer.prereqConfigLoc= :
INFO: Arg:8:-Doracle.installer.unixVersion=B.11.31:
INFO: Arg:9:-d64:
INFO: Arg:10:-mx96m:

Windows 8.1 SOFTWARE registry hive load failed on Windows Server 2012

Hello,
I am participated in custom Windwows Software backup/restore project development that requires load of Windows SOFTWARE/SYSTEM registry hives from target OS system drive connected to Windows system.
On all Windows version except Windows 8.1 program works correctly but when host system (on that programm run on) is Windows Server 2012 or Windows 8 and target system is Windows 8.1 registry hive load failed with following error:
Failed to load f:\Windows\System32\config\software: [1009] The configuration registry database is corrupt.
After run of 'chkdsk /r' error still remained. All requred security privileges (SE_BACKUP, SE_RESTORE) are applied. All systems are 64-bit.
Generally even system registry editor (regedit) could not open SOFTWARE hive from Windows 8.1 with following error:
Cannot Load f:\Windows\System32\config\software: Error while loading hive.
But when host system is Windows 7 or Windwos Server 2008 then SOFTWARE hive loaded without any problem.
So is there some Windows 8/8.1 registry hives validation mechanism or additional security checks tha prevents load of registry hives fromother OS instance?

Sorry for later response. I was busy with other tasks.
The procMon tool shows RegLoadKey is failed when it tried to load the hive on Windows 8.1 (8.1 based WinPE also). On Windows 7, I didn't see the error (Shows Success instead of REGISTRY CORRUPT). Once the hive is load & unloaded on Windows 7 OS, the
check sum of the hive is changed, and I can load the updated hive with regedit in Windows 8.1 OS.
"reg.exe","752","RegCloseKey","HKLM\SOFTWARE\Microsoft\SQMClient\Windows","SUCCESS",""
"reg.exe","752","RegQueryKey","HKLM","SUCCESS","Query: HandleTags, HandleTags: 0x0"
"reg.exe","752","RegOpenKey","HKLM\Software\Microsoft\Rpc","SUCCESS","Desired Access: Query Value"
"reg.exe","752","RegQueryValue","HKLM\SOFTWARE\Microsoft\Rpc\IdleTimerWindow","NAME NOT FOUND","Length: 144"
"reg.exe","752","RegCloseKey","HKLM\SOFTWARE\Microsoft\Rpc","SUCCESS",""
"reg.exe","752","QueryNameInformationFile","C:\Dhoni","SUCCESS","Name: \Dhoni"
"reg.exe","752","RegQueryKeySecurity","HKLM","SUCCESS",""
"reg.exe","752","RegLoadKey","HKLM\target1","REGISTRY CORRUPT","Hive Path: C:\Dhoni\SYSTEM1"

SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
CREATE TABLE #promo (promo VARCHAR(1000))
BULK
INSERT #promo
FROM '\\aseposretail\c$\nz\promo_names.txt'
WITH
--FIELDTERMINATOR = '',
ROWTERMINATOR = '\n'
SELECT * from #promo
It's ok when I manually execute the proc in SSMS.
When I try to run the report from BIDS I got following error:
*Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

I'm having the same type of issue. I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another. I get this error:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager. Still this one workstation is getting the error. Since the same login is being used on both workstations and it works on one but not the other, the issue is not a permissions issue. I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine. Any ideas on what the client configuration issue is? These are the version numbers for Management Studio:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.5512
Microsoft .NET Framework 2.0.50727.1433
Operating System 5.1.2600
Thanks,
MWise

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

Initial load failing between identical tables. DEFGEN skewed and fixable?

Initial load failing between identical tables. DEFGEN skewed and fixable?
Error seen:
2013-01-28 15:23:46 WARNING OGG-00869 [SQL error 0 (0x0)][HP][ODBC/MX Driver] DATETIME FIELD OVERFLOW. Incorrect Format or Data. Row: 1 Column: 11.
Then compared the discard record against a select * on the key column.
Mapping problem with insert record (target format)...
**** Comparing Discard contents to Select * display
ABCHID = 3431100001357760616974974003012 = 3431100001357760616974974003012
*!!! ABCHSTEPCD = 909129785 <> 9 ???*
ABCHCREATEDDATE = 2013-01-09 13:43:36 = 2013-01-09 13:43:36
ABCHMODIFIEDDATE = 2013-01-09 13:43:36 =2013-01-09 13:43:36
ABCHNRTPUSHED = 0 = 0
ABCHPRISMRESULTISEVALUATED = 0 = 0
SABCHPSEUDOTERM = 005340 = 005340
ABCHTERMID = TERM05 = TERM05
ABCHTXNSEQNUM = 300911112224 = 300911112224
ABCHTIMERQSTRECVFROMACQR = 1357799914310 = 1357799914310
*!!! ABCTHDATE = 1357-61-24 00:43:34 <> 2013-01-09 13:43:34*
ABCHABCDATETIME = 2013-01-09 13:43:34.310000 = 2013-01-09 13:43:34.310000
ABCHACCOUNTABCBER =123ABC = 123ABC
ABCHMESSAGETYPECODE = 1210 = 1210
ABCHPROCCDETRANTYPE = 00 = 00
ABCHPROCCDEFROMACCT = 00 = 00
ABCHPROCCDETOACCT = 00 = 00
ABCHRESPONSECODE = 00 = 00
…. <snipped>
Defgen comes out same when run against either table.
Also have copied over and tried both outputs from DEFGEN.
+- Defgen version 2.0, Encoding ISO-8859-1
* Definitions created/modified 2013-01-28 15:00
* Field descriptions for each column entry:
* 1 Name
* 2 Data Type
* 3 External Length
* 4 Fetch Offset
* 5 Scale
* 6 Level
* 7 Null
* 8 Bump if Odd
* 9 Internal Length
* 10 Binary Length
* 11 Table Length
* 12 Most Significant DT
* 13 Least Significant DT
* 14 High Precision
* 15 Low Precision
* 16 Elementary Item
* 17 Occurs
* 18 Key Column
* 19 Sub Data Type
Database type: SQLMX
Character set ID: ISO-8859-1
National character set ID: UTF-16
Locale: en_EN_US
Case sensitivity: 14 14 14 14 14 14 14 14 14 14 14 14 11 14 14 14
Definition for table RT.ABC
Record length: 1311
Syskey: 0
Columns: 106
ABCHID 64 34 0 0 0 0 0 34 34 34 0 0 32 32 1 0 1 3
ABCHSTEPCD 132 4 39 0 0 0 0 4 4 4 0 0 0 0 1 0 0 0
ABCHCREATEDDATE 192 19 46 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHMODIFIEDDATE 192 19 68 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHNRTPUSHED 130 2 90 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPRISMRESULTISEVALUATED 130 2 95 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPSEUDOTERM 0 8 100 0 0 0 0 8 8 8 0 0 0 0 1 0 0 0
ABCTERMID 0 16 111 0 0 0 0 16 16 16 0 0 0 0 1 0 0 0
ABCHTXNSEQNUM 0 12 130 0 0 0 0 12 12 12 0 0 0 0 1 0 0 0
ABCHTIMERQSTRECVFROMACQR 64 24 145 0 0 0 0 24 24 24 0 0 22 22 1 0 0 3
ABCTHDATE 192 19 174 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHABCDATETIME 192 26 196 0 0 1 0 26 26 26 0 6 0 0 1 0 0 0
ABCHACCOUNTABCER 0 19 225 0 0 1 0 19 19 19 0 0 0 0 1 0 0 0
ABCHMESSAGETYPECODE 0 4 247 0 0 1 0 4 4 4 0 0 0 0 1 0 0 0
ABCHPROCCDETRANTYPE 0 2 254 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDEFROMACCT 0 2 259 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDETOACCT 0 2 264 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHRESPONSECODE 0 5 269 0 0 1 0 5 5 5 0 0 0 0 1 0 0 0
… <snipped>
The physical table shows a PACKED REC 1078
And table invoke is:
-- Definition of table ABC3.RT.ABC
-- Definition current Mon Jan 28 18:20:02 2013
ABCHID NUMERIC(32, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHSTEPCD INT NO DEFAULT HEADING '' NOT NULL NOT
DROPPABLE
, ABCHCREATEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHMODIFIEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHNRTPUSHED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPRISMRESULTISEVALUATED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPSEUDOTERM CHAR(8) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTERMID CHAR(16) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTXNSEQNUM CHAR(12) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTIMERQSTRECVFROMACQR NUMERIC(22, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCTHDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHABCDATETIME TIMESTAMP(6) DEFAULT NULL HEADING ''
, ABCHACCOUNTNABCBER CHAR(19) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHMESSAGETYPECODE CHAR(4) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETRANTYPE CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDEFROMACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETOACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHRESPONSECODE CHAR(5) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
…. Snipped
I suspect that the fields having subtype 3 just before the garbled columns is a clue, but not sure what to replace with or adjust.
Any and all help mighty appreciated.

Worthwhile suggestion, just having difficulty applying.
I will tinker with it more. But still open to more suggestions.
=-=-=-=-
Oracle GoldenGate Delivery for SQL/MX
Version 11.2.1.0.1 14305084
NonStop H06 on Jul 11 2012 14:11:30
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-01-31 15:19:35
Operating System Version:
NONSTOP_KERNEL
Version 12, Release J06
Node: abc3
Machine: NSE-AB
Process id: 67895711
Description:
** Running with the following parameters **
2013-01-31 15:19:40 INFO OGG-03035 Operating system character set identified as ISO-8859-1. Locale: en_US_POSIX, LC_ALL:.
Comment
Comment
REPLICAT lodrepx
ASSUMETARGETDEFS
Source Context :
SourceModule : [er.init]
SourceID : [home/ecloud/sqlmx_mlr14305084/src/app/er/init.cpp]
SourceFunction : [get_infile_params]
SourceLine : [2418]
2013-01-31 15:19:40 ERROR OGG-00184 ASSUMETARGETDEFS is not supported for SQL/MX ODBC replicat.
2013-01-31 15:19:45 ERROR OGG-01668 PROCESS ABENDING.

Adobe loader fails to complete

cs6 photoshop..Student version installed.. Blue screen of death required system restore to befor that installation.
Trying to reinstall, but adobe loader fails to complete. Any ideas?? Thanks Ray

We cannot know. We need the exact crash info and at least some system specs. Refer to this:
Working with your Operating System’s Tools
That aside, if you ran a system restore, the install would be busted from stem to stern. Run the Creative Suite Cleaner Tool and try again. If it still doesn't work, we need install logs.
Mylenium

SRW224G4P - " ERR Runtime Loading Fail - System Halt"

Similar Messages

Maybe you are looking for