SRWC 2.2_13 Option not supported by Protocol

Hi,
First of all, I know what i'm trying to do is unsupported however my question remains.
I'm trying to run the EA1 bits on my Vostro Laptop running Solaris Express Build 107.
Installation of SRSS 4.2 EA1 runs just fine, aswell the installation of SRWC 2.2. However if i try to connect
to a windows environment i'm getting
SO_KEEPALIVE: Option not supported by protocol
SO_KEEPALIVE: Option not supported by protocol
/opt/SUNWuttsc/bin/uttsc[104]: 7543 Segmentation Fault
Does anyone have some pointers where I could check to get srwc 2.2_13 running on Solaris Express?
Regards,
patrick

You can ignore the SO_KEEPALIVE messages. They're caused by a bug in the 'uttsc-bin' program (which is the real SRWC program, 'uttsc' is just a launcher) but they're harmless. You might see similar messages in other SRSS logfiles, you can ignore those too.
The segfault is the killer. There's probably nothing you can do about that yourself, but if you can capture a corefile from the failing process and send that to Sun then they should be able to figure out what's going wrong and either fix it or tell you how to work around it. To do that you'll first have to use 'coreadm' to enable corefile collection for set[ug]id processes. By default cores aren't generated for programs that run with elevated privilege. That'll go something like this:
mkdir -p -m 0700 /var/core/uttsc-bin
coreadm -g /var/core/%f/%p-%t
coreadm -e global-setid
Then run 'uttsc' and after it reports the segfault look in /var/core/uttsc-bin for a core file whose name is <process-id>-<timestamp>. That's the core file you should send to Sun. To do that, send a message to the SRS5 EA feedback mail address or follow up in this thread and someone will give you an address to send it to. (Don't send the core file to the EA feedback address. It'd be rude to broadcast such a large file to all of the people who are monitoring that address.)

Similar Messages

  • Error In Receiver BC adapter(EOIO not supported by protocol BC.)

    Hi Experts ,
    My Scenario is ABAP proxy to SAP BC .I had  bellow error  in Receiver BC adapter .
    Adapter Framework caught exception: Delivery semantics EOIO not supported by protocol BC.
    Error Delivering the message to the application using connection BC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.InvalidParamException: Delivery semantics EOIO not supported by protocol BC..
    Please help how to resolve this .
    Regards
    Upendra.V
    Edited by: upendra v on Oct 4, 2010 2:08 PM

    HI Anuradha,
    Check the below link for receiver mail configuration and follow the steps accordingly.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&overridelayout=true
    Regards,
    Naveen

  • Fatal error: Client does not support authentication protocol requested by server; consider upgrading MySQL client

    Fatal error: Client does not support authentication protocol
    requested by server; consider upgrading MySQL client in
    /homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
    on line 9
    This is the error that comes up on the server where the site
    sits. The database is working on my local machine with the local
    settings, but wont connect due to the above.
    I think im using MySQL client 3.23 How do i upgrade?
    I found this on MySQL site:
    http://dev.mysql.com/doc/refman/5.0/en/old-client.html
    I'm not sure how to edit the connection string to make it
    accept the vaules.

    The_FedEx_Guy wrote:
    > Fatal error: Client does not support authentication
    protocol requested by
    > server; consider upgrading MySQL client in
    >
    /homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
    on
    > line 9
    > I think im using MySQL client 3.23 How do i upgrade?
    The MySQL client that the error refers to isn't the version
    of MySQL,
    but the MySQL library bundled with PHP. It sounds as though
    your hosting
    company has upgraded to MySQL 4.1 or higher, but is still
    using PHP 4.
    > I'm not sure how to edit the connection string to make
    it accept the vaules.
    You can't. It's the way that the user account passwords are
    stored in
    MySQL. You need to get the hosting company to upgrade to PHP
    5 or to
    reset the passwords in MySQL using the OLD_PASSWORD()
    function. This
    needs to be done by someone with top-level administrative
    privileges on
    the database.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • "Desktop does not support requested protocol" - vmware client on OS X 10.8

    Down loaded vmware client 1.7 on myiMac running Mountain Lion. I get the following issue - "Desktop does not support requested protocol"
    Can anyone advise or guide me?

    Thank you, understood, and I will not uninstall anything, but do I install this current update 3.8.2. v1.1?
    My current system does not match what is needed for it according to the information on this page ...
    http://support.apple.com/en-us/HT201068
    The system requirements needed for the update are OS X 10.9 or later, and my system is OS X 10.8.5.

  • Mount -o loop: option not supported

    Hello,
    I have .TRK file and trying to mount as below.
    User-2:CD Admin$ file IC01.TRK
    IC01.TRK: ISO 9660 CD-ROM filesystem data 'ABCD'
    User-2:CD Admin$ sudo mount -o loop -t cd9660 XY01.TRK /tmp/trk
    mount_cd9660: -o loop: option not supported
    The same is working fine with Linux: sudo mount -t iso9660 -o loop IC01.TRK /mnt/vshare
    Can you help me to undertand the difference and how to mount this file in Mac?
    regards
    MM

    What works in one operating system may not work in another. Read the manual. Try the following->
    hdiutil attach IC01.TRK

  • Ffserver can't start. (Address family not supported by protocol)

    Does anyone can successfully use the latest ffserver from Arch ? It refuse to start and give me the "Address family not supported by protocol"  on my system.
    The ffserver error message is:
    $ ffserver -f ./ffserver.conf
    ffserver version 0.7.6, Copyright (c) 2000-2011 the FFmpeg developers
    built on Oct 3 2011 13:04:32 with gcc 4.6.1 20110819 (prerelease)
    configuration: --prefix=/usr --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-libx264 --enable-libvpx --enable-libtheora --enable-postproc --enable-shared --enable-x11grab --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-libschroedinger --enable-libopenjpeg --enable-librtmp --enable-gpl --enable-version3 --enable-runtime-cpudetect --disable-debug
    libavutil 50. 43. 0 / 50. 43. 0
    libavcodec 52.122. 0 / 52.122. 0
    libavformat 52.110. 0 / 52.110. 0
    libavdevice 52. 5. 0 / 52. 5. 0
    libavfilter 1. 80. 0 / 1. 80. 0
    libswscale 0. 14. 1 / 0. 14. 1
    libpostproc 51. 2. 0 / 51. 2. 0
    bind(port 8090): Address family not supported by protocol
    and the ffserver.conf is just as simple as follows:
    Port 8090
    # bind to all IPs aliased or not
    BindAddress 127.0.0.1
    # max number of simultaneous clients
    MaxClients 1000
    # max bandwidth per-client (kb/s)
    MaxBandwidth 10000
    # Suppress that if you want to launch ffserver as a daemon.
    NoDaemon
    <Feed feed1.ffm>
    File /tmp/feed1.ffm
    FileMaxSize 800M
    </Feed>
    <Stream status.html>
    Format status
    </Stream>
    <Stream test.swf>
    Feed feed1.ffm
    Format swf
    VideoCodec flv
    NoAudio
    # Audio bit rate at 16 instead of 44 reduces bandwidth a lot! ;)
    # AudioBitRate 16
    # idem for sample rate
    # AudioSampleRate 22050
    # Bitrate for the video stream: QUADRATAZZI
    VideoBitRate 90
    # Ratecontrol buffer size, non esagerare, meno e' meglio (?!?)
    VideoBufferSize 1000
    # Number of frames per second: SCATTICAZZI
    VideoFrameRate 3
    #VideoQMin 1
    #VideoQMax 5
    VideoSize 352x288
    PreRoll 15
    #Noaudio this if you want video only
    </Stream>
    some basic info on my system is:
    $ pacman -Q ffmpeg linux glibc
    ffmpeg 20111003-1
    linux 3.0.6-2
    glibc 2.14-6
    Any help is welcome.

    Does anyone can successfully use the latest ffserver from Arch ? It refuse to start and give me the "Address family not supported by protocol"  on my system.
    The ffserver error message is:
    $ ffserver -f ./ffserver.conf
    ffserver version 0.7.6, Copyright (c) 2000-2011 the FFmpeg developers
    built on Oct 3 2011 13:04:32 with gcc 4.6.1 20110819 (prerelease)
    configuration: --prefix=/usr --enable-libmp3lame --enable-libvorbis --enable-libxvid --enable-libx264 --enable-libvpx --enable-libtheora --enable-postproc --enable-shared --enable-x11grab --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-libschroedinger --enable-libopenjpeg --enable-librtmp --enable-gpl --enable-version3 --enable-runtime-cpudetect --disable-debug
    libavutil 50. 43. 0 / 50. 43. 0
    libavcodec 52.122. 0 / 52.122. 0
    libavformat 52.110. 0 / 52.110. 0
    libavdevice 52. 5. 0 / 52. 5. 0
    libavfilter 1. 80. 0 / 1. 80. 0
    libswscale 0. 14. 1 / 0. 14. 1
    libpostproc 51. 2. 0 / 51. 2. 0
    bind(port 8090): Address family not supported by protocol
    and the ffserver.conf is just as simple as follows:
    Port 8090
    # bind to all IPs aliased or not
    BindAddress 127.0.0.1
    # max number of simultaneous clients
    MaxClients 1000
    # max bandwidth per-client (kb/s)
    MaxBandwidth 10000
    # Suppress that if you want to launch ffserver as a daemon.
    NoDaemon
    <Feed feed1.ffm>
    File /tmp/feed1.ffm
    FileMaxSize 800M
    </Feed>
    <Stream status.html>
    Format status
    </Stream>
    <Stream test.swf>
    Feed feed1.ffm
    Format swf
    VideoCodec flv
    NoAudio
    # Audio bit rate at 16 instead of 44 reduces bandwidth a lot! ;)
    # AudioBitRate 16
    # idem for sample rate
    # AudioSampleRate 22050
    # Bitrate for the video stream: QUADRATAZZI
    VideoBitRate 90
    # Ratecontrol buffer size, non esagerare, meno e' meglio (?!?)
    VideoBufferSize 1000
    # Number of frames per second: SCATTICAZZI
    VideoFrameRate 3
    #VideoQMin 1
    #VideoQMax 5
    VideoSize 352x288
    PreRoll 15
    #Noaudio this if you want video only
    </Stream>
    some basic info on my system is:
    $ pacman -Q ffmpeg linux glibc
    ffmpeg 20111003-1
    linux 3.0.6-2
    glibc 2.14-6
    Any help is welcome.

  • Address family not supported by protocol family: bind

    Over the past few days a number of users have reported connection issues with our application. We've been able to track the problem to this line of code:
    ServerSocketChannel sc = ServerSocketChannel.open();
    sc.socket().bind(new InetSocketAddress("localhost", 0)); <- error thrown
    The following error is thrown:
    java.net.SocketException: Address family not supported by protocol family: bind
    sun.nio.ch.Net.bind(Native Method)
    sun.nio.ch.ServerSocketChannelImpl.bind(Unknown Source)
    sun.nio.ch.ServerSocketAdaptor.bind(Unknown Source)
    sun.nio.ch.ServerSocketAdaptor.bind(Unknown Source)
    I've read this is something to do with an IPv4 / IPv6 issue. But what I don't understand is that our users have had this working fine for months and we've never had any problems in the past, but within the last couple of days 10 people have contacted us, all with the same issue. We've not released any patches so we've not introduced the problem. Does anyone know what might have changed in the past few days? Did Microsoft release a patch to modify the IPv 4 / 6 protocols?
    Apparently the issue might be resolved in Java7, but we have thousands of users, and rolling out a new version of Java is a big upheaval.
    Any ideas???
    BBB

    It uses a JRE that is isolated for our application, so Java updates 'shouldn't' affect it. I have a sneaking suspicion that a Vista update may have changed something, but I can't be sure.
    I'm working through the problem with one of our users, and I've changed the code from:
    ServerSocketChannel sc = ServerSocketChannel.open();
    sc.socket().bind(new InetSocketAddress("localhost", 0));To
    ServerSocket sc = new ServerSocket();
    sc.bind(new InetSocketAddress("localhost", 0));This works and I'm able to get an available port. However, later in the code it runs this section of code to connect the socket:
         void connect() throws IOException, InterruptedException {
              int retry;
              for (retry = 0; retry < MAX_RETRY; retry++) {
                   try {
                        channel = SocketChannel.open();
                        channel.configureBlocking(false);
                        //connect to server
                        channel.connect(serverAddr);
                        //register events to listen
                        channel.register(selector, SelectionKey.OP_CONNECT);
                        while (!channel.isConnected()) {
                             if (selector.select(1) > 0) {
                                  Set readyKeys = selector.selectedKeys();
                                  Iterator i = readyKeys.iterator();
                                  while (i.hasNext()) {
                                       SelectionKey key = (SelectionKey) i.next();
                                       i.remove();
                                       SocketChannel keyChannel = (SocketChannel) key
                                                 .channel();
                                       if (key.isConnectable()) {
                                            if (keyChannel.isConnectionPending()) {
                                                 keyChannel.finishConnect();
                                            break;
                        break;
                   } catch (Exception e) {
                        channel.close();
                        channel = null;
                        try {
                             Thread.sleep(150);
                        } catch (Exception ex) {
              if (retry == MAX_RETRY) {
                   throw new InterruptedException("Maximum retry number reached!");
              channel.register(selector, SelectionKey.OP_READ);
         }It's now falling over on this line:
    channel.connect(serverAddr);
    java.net.SocketException: Address family not supported by protocol family: connect
    serverAddr is a InetSocketAddress, channel is a SocketChannel, which appears not to be supported on the machine that are having these connection issues.
    I'll be honest, I have little or no experience of implementing Sockets, and since I can't replicate the actual problem that our users are having it makes it even hard to fix it or try to code a workaround. The code above is from an OpenSource project, i.e. it's not something I wrote. In other words, I'm kinda up the 'proverbial creek'!
    Could anybody be kind enough to steer me in the right direction for a workaround that doesn't use a SocketChannel? It really would be appreciated!
    BBB

  • Portal - Infoview option not supported by SAP

    I have a deck titled "Delivering SAP BusinessObjects content from SAP NetWeaver Portal"
    In this deck ,slide 14  it says Infoview option not recommended "Not supported (known issues with some web browser)"
    is it true ,they how do we leverage Infoview as for URL it takes lot of effort
    Thanks

    This is the option you are recommending right ?but it says not recommended by SAP for browser supporting known issues
    /people/ingo.hilgefort/blog/2010/04/08/sap-businessobjects-enterprise-sap-enterprise-portal--part-3-of-4
    This is the deck I was referring to pg-14 which says not recommended by SAP for browser supporting known issues
    http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/800a9e1c-f0f7-2c10-b48e-d3f34f20ef88
    Thanks

  • Class-map does not support match protocol ssl

    I have several 1941/k9's that do not have the class-map command: to suppot ssl.  System image is c1900-universalk9-mz.SPA.152-1.T.bin.
    class-map match-any af31
    match protocol ssl  <-- missing.
    I did some google searches but come up with nothing. 
    Is the fix to upgrade IOS?  I have found it on other routers running c1900-universalk9-mz.SPA.152-4.M4.bin.  I would just upgrade and check but have an extensive change review board with questions before doing so.
    Thanks for advice,
    Haydn

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    I'm not current on NBAR (or NBAR 2), but NBAR used to support loadable modules (PDMs?).  Sometimes Cisco would provide those so you could add match protocols without upgrading your IOS.
    Otherwise the "fix" would be to upgrade your IOS.
    Lastly, depending on what it matching SSL really means to you, using port based ACLs might suffice (in fact, some NBAR match protocol is only really that, but some NBAR matches regardless of the port usage).
    PS:
    Also on the subject of SSL, don't forget much can use it.  I once matched on it for the purposes of providing secure shell higher queuing priority, worked great for SSH, not so great when secure copy (SCP) also matched against it.

  • IChat video option "not supported on this computer" but it is a MacBook ...

    I bought my wife a MacBook and have been using iChat with an AIM account over a Sprint Sierra 3g/4g hotspot to video chat with my wife while she is away for training.
    It has been working for the past several months and now says it is no longer supported. Only audio chats.
    Camera works fine in Photo Booth and I made sure that all camera apps were closed when she opened iChat. Also had her reboot her machine and make sure that she had not disabled video. Video menu isn't even available though only audio.
    Any idea what is going on??

    Hi,
    This can be about how much Internet Speed or rather the portion of a shared connection she can "See" on the computer.
    Doing a Speed test may determine how much speed she has
    http://www.speedtest.net/ (Use the yellow star)
    When you say "reboot" do you mean a complete shut down then (Re)starting the machine rather than just using the Restart option ?
    I would also try a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD (or ⌘)+ALT PR Keys until she has heard three Start Up Bongs.
    Lastly it might be that iChat has "Saved" the wrong Bandwidth speed to the .plist involved.
    She should do this to find out what iChat can 'See" and has saved.
    Shut down iChat
    Open Terminal.
    Copy and paste this Bold text in to Terminal and hit the Enter/Return key.
    /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
    This will cause iChat to Launch and create a Log in Terminal about what it is doing.
    It will pause once the Buddy list has loaded with info in the Log about NAT tests and port tests.
    She should Quit iChat at this point.
    She should copy the log and post it here. (Save it to TextEdit is an option)
    Quit Terminal.
    About 1/3rd the way Down the Log should list the BWD (Bandwidth) it can see - both upload and download and say whether it can do 1-9 Audio chats or 1-3 Video chats.
    Also get her to check the System Profiler and whether in Hardware > USB the computer can "See" the camera ?
    8:54 PM Sunday; July 18, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Does GNOKII support smpp protocol?

    I read that smslib does not support
    smpp protocol .....so I want to
    know does GNOKII support smpp
    protocol?

    Hi,
    From what I understand optomux is a standard that determines the syntax of the command sent. The commands are sent through serial or Ethernet. You can use LabVIEW (the VISA VIs) to communicate with a device using serial or Ethernet. However, there are no VIs that will build the optomux commands.
    I'm not familiar with them, but you can check out the optomux VIs included with the Fieldpoint explorer. That should give you an idea of how to use the VISA to implement optomux communication.
    DiegoF
    National Instruments.

  • Upload Error message: HTTPS protocol is not supported

    Hi,
       Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
       Log says
    Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
         How to resolve this?
    Thanks
    Sumathi

    Hi Sumathi,
    As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
    Hope it helps
    Detlev

  • "DBSL does not support extended connect protocol" while configuring SSFS

    Hi, I'm trying to configure ssfs on ERP EHP7 on HANA Database system. Doing it with this guide - SSFS Implementation for Oracle Database
    But when I'm trying to test connection with r3trans I got following error in the log:
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): DBSL does not support extended connect protocol
    4 ETW000                         ==> ssfs won't be used                                                   26  0.004936
    I already updated DBSL_LIB to the latest version, but it doesn't help.
    Here is full log:
    4 ETW000 C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE version 6.24 (release 741 - 16.05.14 - 20:14:06).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 02.06.2014 - 13:49:16
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [     dev trc,00000]  Mon Jun 02 13:49:16 2014                                                 106  0.000106
    4 ETW000  [     dev trc,00000]  db_con_init called                                                        36  0.000142
    4 ETW000  [     dev trc,00000]  set_use_ext_con_info(): ssfs will be used to get connect information
    4 ETW000                                                                                                  61  0.000203
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  26  0.000229
    4 ETW000  [     dev trc,00000]  create_con (con_name=R/3)                                                 17  0.000246
    4 ETW000  [     dev trc,00000]  Loading DB library 'dbhdbslib.dll' ...                                    46  0.000292
    4 ETW000  [     dev trc,00000]  DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEED100000
    4 ETW000                                                                                                3840  0.004132
    4 ETW000  [     dev trc,00000]      using "C:\usr\sap\CM1\DVEBMGS04\exe\dbhdbslib.dll"                    21  0.004153
    4 ETW000  [     dev trc,00000]  Library 'dbhdbslib.dll' loaded                                            21  0.004174
    4 ETW000  [     dev trc,00000]  function DbSlExpFuns loaded from library dbhdbslib.dll                    42  0.004216
    4 ETW000  [     dev trc,00000]  Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.22)                 81  0.004297
    4 ETW000  [     dev trc,00000]  function dsql_db_init loaded from library dbhdbslib.dll                   25  0.004322
    4 ETW000  [     dev trc,00000]  function dbdd_exp_funs loaded from library dbhdbslib.dll                  41  0.004363
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    47  0.004410
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000)            24  0.004434
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.004452
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000205F170)            22  0.004474
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.004491
    4 ETW000  [     dev trc,00000]  New connection 0 created                                                  17  0.004508
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                  38  0.004546
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141BAEDB0)            44  0.004590
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.004609
    4 ETW000  [     dev trc,00000]  db_con_connect (con_name=R/3)                                             19  0.004628
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  24  0.004652
    4 ETW000  [     dev trc,00000]  find_con_by_name found the following connection:                          17  0.004669
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                 164  0.004833
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): reading connect info for connection R/3             34  0.004867
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=74,arg_p=0000000000000000)            24  0.004891
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=15)                                                   19  0.004910
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): DBSL does not support extended connect protocol
    4 ETW000                         ==> ssfs won't be used                                                   26  0.004936
    4 ETW000  [     dev trc,00000]  { DbSlHDBConnect(con_info_p=0000000000000000)                             31  0.004967
    4 ETW000  [     dev trc,00000]  DBHDBSLIB : version 741.10, patch 0.022 (Make PL 0.26)                    34  0.005001
    4 ETW000  [     dev trc,00000]  HDB shared library (dbhdbslib) patchlevels (last 10)                      32  0.005033
    4 ETW000  [     dev trc,00000]    (0.022) Get database version via dbsl call (note 1976918)               24  0.005057
    4 ETW000  [     dev trc,00000]    (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
    4 ETW000                                                                                                  32  0.005089
    4 ETW000  [     dev trc,00000]    (0.020) SQL DDL with data aging (note 1897636)                          21  0.005110
    4 ETW000  [     dev trc,00000]    (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
    4 ETW000                                                                                                  30  0.005140
    4 ETW000  [     dev trc,00000]    (0.014) Tablesize calculation for HANA optimized (note 1952609)         25  0.005165
    4 ETW000  [     dev trc,00000]    (0.014) Native SQL UPSERT with DataAging (note 1897636)                 21  0.005186
    4 ETW000  [     dev trc,00000]    (0.014) DBSL supports HANA revision number up to 3 digits (note 1952701)
    4 ETW000                                                                                                  27  0.005213
    4 ETW000  [     dev trc,00000]    (0.010) Quotes missing by FAE with the hint dbsl_equi_join (note 1939234)
    4 ETW000                                                                                                  28  0.005241
    4 ETW000  [     dev trc,00000]    (0.007) Obsere deactivate aging flag (note 1897636)                     24  0.005265
    4 ETW000  [     dev trc,00000]    (0.007) Calculated record length for INSERT corrected (note 1897636)
    4 ETW000                                                                                                  27  0.005292
    4 ETW000  [     dev trc,00000]                                                                            15  0.005307
    4 ETW000  [     dev trc,00000]   -> init()                                                                21  0.005328
    4 ETW000  [     dev trc,00000]    STATEMENT_CACHE_SIZE = 1000                                            181  0.005509
    4 ETW000  [     dev trc,00000]   -> init()                                                               505  0.006014
    4 ETW000  [     dev trc,00000]   -> loadClientRuntime()                                                   27  0.006041
    4 ETW000  [     dev trc,00000]  Loading SQLDBC client runtime ...                                         19  0.006060
    4 ETW000  [     dev trc,00000]  SQLDBC Module  : C:\usr\sap\CM1\hdbclient\libSQLDBCHDB.dll               779  0.006839
    4 ETW000  [     dev trc,00000]  SQLDBC Runtime : libSQLDBCHDB 1.00.68 Build 0384084-1510                  74  0.006913
    4 ETW000  [     dev trc,00000]  SQLDBC client runtime is 1.00.68.0384084                                  45  0.006958
    4 ETW000  [     dev trc,00000]   -> getNewConnection()                                                    28  0.006986
    4 ETW000  [     dev trc,00000]   <- getNewConnection(con_hdl=0)                                           78  0.007064
    4 ETW000  [     dev trc,00000]   -> checkEnvironment(con_hdl=0)                                           34  0.007098
    4 ETW000  [     dev trc,00000]   -> connect(con_info_p=0000000000000000)                                  27  0.007125
    4 ETW000  [     dev trc,00000]  Try to connect via secure store (DEFAULT) on connection 0 ...             62  0.007187
    4 ETW000  [     dev trc,00000]   -> check_db_params(con_hdl=0)                                         61365  0.068552
    4 ETW000  [     dev trc,00000]  Attach to HDB : 1.00.68.384084 (NewDB100_REL)                           7595  0.076147
    4 ETW000  [     dev trc,00000]  Database release is HDB 1.00.68.384084                                    49  0.076196
    4 ETW000  [     dev trc,00000]  INFO : Database 'HDB/00' instance is running on 'hanaserver'            6867  0.083063
    4 ETW000  [     dev trc,00000]  INFO : Connect to DB as 'SAPCM1', connection_id=201064                 43659  0.126722
    4 ETW000  [     dev trc,00000]  DB max. input host variables  : 32767                                   6954  0.133676
    4 ETW000  [     dev trc,00000]  DB max. statement length      : 1048576                                   34  0.133710
    4 ETW000  [     dev trc,00000]  DB max. array size            : 100000                                    75  0.133785
    4 ETW000  [     dev trc,00000]  use decimal precision as length                                           21  0.133806
    4 ETW000  [     dev trc,00000]  ABAPVARCHARMODE is used                                                   19  0.133825
    4 ETW000  [     dev trc,00000]  INFO : DBSL buffer size = 1048576                                         20  0.133845
    4 ETW000  [     dev trc,00000]  Command info enabled                                                      19  0.133864
    4 ETW000  [     dev trc,00000]  Now I'm connected to HDB                                                  18  0.133882
    4 ETW000  [     dev trc,00000]  00: hanaserver-HDB/00, since=20140602134916, ABAP= <unknown> (0)          30  0.133912
    4 ETW000  [     dev trc,00000]  } DbSlHDBConnect(rc=0)                                                    18  0.133930
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=30,arg_p=0000000000000000)             24  0.133954
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.133972
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F460)             22  0.133994
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.134012
    4 ETW000  [     dev trc,00000]  Connection 0 opened (DBSL handle 0)                                       36  0.134048
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=7,arg_p=000000000205F4B0)              25  0.134073
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.134090
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=63,arg_p=000000000205F2B0)             23  0.134113
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.134131
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F300)          12214  0.146345
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    32  0.146377
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=11,arg_p=000000000205F420)             26  0.146403
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.146421
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=22,arg_p=000000000205F390)             23  0.146444
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    37  0.146481
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=13,arg_p=000000000205F260)             29  0.146510
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.146528
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=24,arg_p=000000000205F210)             37  0.146565
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    35  0.146600
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=51,arg_p=000000000205F200)             40  0.146640
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=15)                                                   31  0.146671
    4 ETW000  [     dev trc,00000]  { DbSlHDBPrepare(con_hdl=0,ss_p=000000000205F4E0,op=3,da_p=000000000205F540)
    4 ETW000                                                                                                  46  0.146717
    4 ETW000  [     dev trc,00000]   -> buildSQLStmt(stmt_p=000000000205F4B0,da_p=000000000205F540,for_explain=0,lock=0,op=3)
    4 ETW000                                                                                                  89  0.146806
    4 ETW000  [     dev trc,00000]   <- buildSQLStmt(len=27,op=3,#marker=0,#lob=0)                            33  0.146839
    4 ETW000  [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0)           75  0.146914
    4 ETW000  [     dev trc,00000]  sc_p=0000000003AEAC40,no=0,idc_p=0000000000000000,con=0,act=0,slen=27,smax=256,#vars=0,stmt=000000000AD913E0,table=SVERS                        
    4 ETW000                                                                                                  46  0.146960
    4 ETW000  [     dev trc,00000]  SELECT VERSION FROM SVERS  ;                                              23  0.146983
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 PREPARE on connection 0                                   21  0.147004
    4 ETW000  [     dev trc,00000]  } DbSlHDBPrepare(rc=0)                                                  6174  0.153178
    4 ETW000  [     dev trc,00000]  { DbSlHDBRead(con_hdl=0,ss_p=000000000205F4E0,da_p=000000000205F540)
    4 ETW000                                                                                                  53  0.153231
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     25  0.153256
    4 ETW000  [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540)          25  0.153281
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  30  0.153311
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    21  0.153332
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  54  0.153386
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
    4 ETW000                                                                                                  33  0.153419
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  33  0.153452
    4 ETW000  [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,bulk=0,in_out=1,da_p=000000000205F540)
    4 ETW000                                                                                                  36  0.153488
    4 ETW000  [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,in_out=1,da_p=000000000205F540)
    4 ETW000                                                                                                  95  0.153583
    4 ETW000  [     dev trc,00000]    OPEN CURSOR C_0000 on connection 0                                      28  0.153611
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 SET InputSize=1                                           23  0.153634
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 EXECUTE on connection 0                                   22  0.153656
    4 ETW000  [     dev trc,00000]    execute() of C_0000, #rec=0, rcSQL=0, rc=0                            6404  0.160060
    4 ETW000  [     dev trc,00000]    CURSOR C_0000, rc=0,#rec=0,#dbcount=0                                   36  0.160096
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  33  0.160129
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=1)                                    21  0.160150
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,types=000000000205F518,#col=1,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  37  0.160187
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=72,rec_lng=144,db_lng=144
    4 ETW000                                                                                                  31  0.160218
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=144, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  31  0.160249
    4 ETW000  [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=1)                                    21  0.160270
    4 ETW000  [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      21  0.160291
    4 ETW000  [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,arr_size=1,types=000000000205F518,da_p=000000000205F540)
    4 ETW000                                                                                                  45  0.160336
    4 ETW000  [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEAC40,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  41  0.160377
    4 ETW000  [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20  0.160397
    4 ETW000  [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEAC40)                                   20  0.160417
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 FETCH (xcnt=1) on connection 0                            23  0.160440
    4 ETW000  [     dev trc,00000]    next() of C_0000, rc=0                                                  27  0.160467
    4 ETW000  [     dev trc,00000]    fetch() of C_0000, #rec=1, rc=0, rcSQL=0                                28  0.160495
    4 ETW000  [     dev trc,00000]   -> deactivate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540,rc=0)
    4 ETW000                                                                                                  91  0.160586
    4 ETW000  [     dev trc,00000]   -> StmtCacheFree(DBSL:C_0000)                                            24  0.160610
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 CLOSE resultset on connection 0                           20  0.160630
    4 ETW000  [     dev trc,00000]  } DbSlHDBRead(rc=0)                                                       34  0.160664
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=43,arg_p=00000001400FAB06)             25  0.160689
    4 ETW000  [     dev trc,00000]  INFO : SAP RELEASE (DB) = 740                                             19  0.160708
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    16  0.160724
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=41,arg_p=00000001400FAB98)             49  0.160773
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.160792
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002055888)             22  0.160814
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.160832
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002055880)             22  0.160854
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    26  0.160880
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=52,arg_p=00000000020558F0)             23  0.160903
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.160920
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=20,arg_p=0000000141FC74F0)             99  0.161019
    4 ETW000  [     dev trc,00000]  INFO : STMT SIZE = 1048576                                                21  0.161040
    4 ETW000  [     dev trc,00000]  INFO : MARKER_CNT = 32767                                                 18  0.161058
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.161077
    4 ETW000  [     dev trc,00000]  NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS'...
    4 ETW000                                                                                                  38  0.161115
    4 ETW000  [     dev trc,00000]  { DbSlHDBPrepare(con_hdl=0,ss_p=0000000002055160,op=3,da_p=00000000020551B0)
    4 ETW000                                                                                                  31  0.161146
    4 ETW000  [     dev trc,00000]   -> buildSQLStmt(stmt_p=0000000002055180,da_p=00000000020551B0,for_explain=0,lock=0,op=3)
    4 ETW000                                                                                                  32  0.161178
    4 ETW000  [     dev trc,00000]   <- buildSQLStmt(len=63,op=3,#marker=0,#lob=0)                            23  0.161201
    4 ETW000  [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEACD8,ss_p=0000000002055160)           38  0.161239
    4 ETW000  [     dev trc,00000]  sc_p=0000000003AEACD8,no=1,idc_p=0000000000000000,con=0,act=0,slen=63,smax=256,#vars=0,stmt=000000000AE09690,table=DDNTT                        
    4 ETW000                                                                                                  38  0.161277
    4 ETW000  [     dev trc,00000]  SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS' ;          21  0.161298
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 PREPARE on connection 0                                   19  0.161317
    4 ETW000  [     dev trc,00000]  } DbSlHDBPrepare(rc=0)                                                  6453  0.167770
    4 ETW000  [     dev trc,00000]  db_con_test_and_open: 1 open cursors (delta=1)                            30  0.167800
    4 ETW000  [     dev trc,00000]  db_con_check_dirty: 1 open cursors, tx = NO , bc = NO                     18  0.167818
    4 ETW000  [     dev trc,00000]  db_con_check_dirty: db_con_dirty = YES                                    16  0.167834
    4 ETW000  [     dev trc,00000]  { DbSlHDBBegRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
    4 ETW000                                                                                                  35  0.167869
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     23  0.167892
    4 ETW000  [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEACD8,da_p=00000000020551B0)          23  0.167915
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.167947
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    23  0.167970
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  34  0.168004
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
    4 ETW000                                                                                                  30  0.168034
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  31  0.168065
    4 ETW000  [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,bulk=0,in_out=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.168097
    4 ETW000  [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,in_out=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.168129
    4 ETW000  [     dev trc,00000]    OPEN CURSOR C_0001 on connection 0                                      20  0.168149
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 SET InputSize=1                                           19  0.168168
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 EXECUTE on connection 0                                   20  0.168188
    4 ETW000  [     dev trc,00000]    execute() of C_0001, #rec=0, rcSQL=0, rc=0                            5712  0.173900
    4 ETW000  [     dev trc,00000]    CURSOR C_0001, rc=0,#rec=0,#dbcount=0                                   34  0.173934
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.173966
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=2)                                    21  0.173987
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,types=0000000002055240,#col=2,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  34  0.174021
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=2,#int=0,#llong=0,#uc=0,rec_lng=16,db_lng=4
    4 ETW000                                                                                                  30  0.174051
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=16, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=65536)
    4 ETW000                                                                                                  32  0.174083
    4 ETW000  [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=65536)                                20  0.174103
    4 ETW000  [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      30  0.174133
    4 ETW000  [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,arr_size=65536,types=0000000002055240,da_p=00000000020551B0)
    4 ETW000                                                                                                  36  0.174169
    4 ETW000  [     dev trc,00000]  } DbSlHDBBegRead(rc=0)                                                    24  0.174193
    4 ETW000  [     dev trc,00000]  { DbSlHDBExeRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
    4 ETW000                                                                                                  35  0.174228
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     20  0.174248
    4 ETW000  [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEACD8,bulk=0,da_p=00000000020551B0)
    4 ETW000                                                                                                  33  0.174281
    4 ETW000  [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20  0.174301
    4 ETW000  [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEACD8)                                   20  0.174321
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 FETCH (xcnt=1) on connection 0                            20  0.174341
    4 ETW000&

    Hi,
    Could you check for SAP Note   1952701 - DBSL supports new HANA version number
    Regards,
    Gaurav

  • When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    I am in the same boat. I tried repeatedly to contact iTunes support, but was told each time that I had contacted the wrong deaprtment and they could not help me. There must be a way to still be able to use the iTunes store without paying for a system update. If not, I hope they will reimburse me the money I have in my acount.

  • TS3716 I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?

    I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
    Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!!

    I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
    Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!!

Maybe you are looking for

  • Problems with RAW file conversion in PS5?

    I recently updated Photoshop and Lightroom to PS5 and LR3.  Never had any problems when I moved between the two programs before.  Now, when I open a RAW photo (jpegs are fine) into PS5 there is a colour/contrast shift which gets saved when I import i

  • Multiple base load in same Hyperion Application

    Need to have some clarity over the multiple base load in same Hyperion application. Just to give some background of the requirement our current HFM application captures the base level data in Indian GAAP reporting structure only just like any other i

  • Length of a sequence

    I have problems with sequences. When I try to define a sequence in an IDL (see the posted code), I have to give the length of the sequence, without the length it doesn't work. If I give the length it works fine. But the problem is that the length of

  • How to configure drill through column

    Hi Guys, I have been trying to drill through column for detailed information on the data. Regards Sabir

  • Db batch update problem

    I have a real problem with doing a batch update in SOA Suite and have tried a number of different approaches but they have all failed at some point. My requirement is really quite simple. I have a simple table - MY_TABLE: Columns: PK_ID - primary key