SS7: How to display all route sets at once, can it be done?

BTS10200
Fairly new to softswitch world. Needing to see what route sets already exist. Is there a command I am missing to dump or show all routesets at once?
Thank You!

Additional features can be added by adding a feature, vsc, and service:
http://www.cisco.com/univercd/cc/td/doc/product/voice/bts10200/bts4_1/provgd/feature.htm
Here is a list of commonly assigned VSCs:
http://www.cisco.com/univercd/cc/td/doc/product/voice/bts10200/bts4_5/cli/cp/85apc.htm#

Similar Messages

NOT WORKING -How To Display All Comments for a Planning Package

Hi All,
I am using How to Document "How To Display All Comments for a Planning Package" to display comments for list of "cost center" against different "fiscal/year" for Key Figure "Budget Amount".
Below is how the Layout looks like where comments are posted against Cost Center- year combination.
Cost Center                          2007     2008     2009     2010     2011
3          2.00     2.00     2.00     2.00     2.00
4          2.00     2.00     2.00     2.00     2.00
6          2.00     2.00     2.00     2.00     2.00
7          2.00     2.00     2.00     2.00     2.00
This case is very similar to the example given in how to document but after following all the steps correctly in the document and also followings various forum links such as below , I am not able to display the comments for list of Cost Centers.
"How to...BSP display comments"...problem with row comment
Below are the issues being faced:
1) When i save the comments , the icon for comments (indicating that some comments have been entered) is not shown against selection of Cost Center-Year although the comment is saved.Comment are also visible in BPS0.
2) On execution "Web interface could not be loaded" - is the message that is shown in the area where BPS application should show all the comments.
Highly Appreciate any help with issues mentioned above.
Kind Regards,
Robin Johri

Hello Robin,
1) please check if you set the row/cell selection property correctly for the layout component in the web interface.
2) the error does not make sense since the comments are displayed in an iframe using a BSP application, not a web interface. Check the URL in the HTML text component.
Regards,
Marc
SAP Techology RIG

How to display All User Logged in time & Logout Time?

How to display All User Logged in time & Logout Time?
Hi..
I want to display All user who logged in the portal,
their username,
their time logged in,
their time logged out..
where can i find these information?
do Portal have already something like this?
Plz advise..Thanks.

The login information is in the wwlog_activity_log. The logout action is only logged when it is explicit. I am using the last user action time for the logout time so I can determine the duration of the visit.

How to display all tables residing in my database

i'm using 10g express edition.
i'm developing a .net application using oracle
i want display table infomation in a datagrid
for that i need to select tables fromthe database using the interface given by them
in that i found server name field.....what it actually means?
also how to create a new database in 10g and how to display all tables residing in the database?
pls help me
thanking u
chaitanya

user11359516 wrote:
i want display table infomation in a datagrid
select owner||'.'||table_name owner_table_name
from all_tables
user11359516 wrote:in that i found server name field.....what it actually means?i'm not sute what you mean by server name field? if you refer to table column name see this code below:
select owner||'.'||table_name||'.'||column_name table_column_name,
       decode(data_type,'VARCHAR',data_type||'('||to_char(data_length)||')',
                        'VARCHAR2',data_type||'('||to_char(data_length)||')',
                        'NUMBER',decode(data_scale,0,data_type||'('||to_char(data_precision)||')',
                                                  null,data_type,
                                                  data_type||'('||to_char(data_precision)||','||to_char(data_scale)||')'),
                        data_type) type,
                        nullable
from all_tab_cols
order by table_name, column_id

I just upgraded to 10.9. My exchange email won't load emails that are older than a few weeks old. How do I change this setting so I can see all my mail?

I just upgraded to 10.9. My exchange email won't load emails that are older than a few weeks old. How do I change this setting so I can see all my mail?

Plett81,
I'm having the exact same problem. It does not seem to be a settings issue but rather some sort of "problem" with mac mail. My Exchange provider was able to setup my mailbox on a test machine running Mavericks and everything pulled in fine, however I cannot duplicate on my upgraded system.
I was able to get rebuild my mailbox and get the older messages within my Exchange inbox, however none of my folders and old messages outside of the Inbox are downloading/synching.
**NOTE** I contacted Apple SUpport and they told me to call my email provider. I called my email provider which did as described above and they don't see a problem. SO as suspected it has something to do with the Mavericks update but I'm not sure Apple is willing to help. I might try contacting them one more time and see.

How To Display All Comments for a Planning Package

Hi,
I have the How-to guide mentioned in the subject and have now moved onto BI7. Is the guide still applicable in BI7 and how would I go about implementing the above How-to in IP instead of BPS?
Thanks,
Ale

Thanks Marc.
I will use BW-BPS for the time being as I've seen screenshots of the solution in the how-to. Still need to answer the question here:
How To. Display All Comments for a Planning Package
As I have no idea how to achieve the functionality detailed in the thread above.
Thanks for your time Marc,
Regards,
Ale

How to display all the questions of a survey in a page?

How to create multiple surveys in a survey list?How to display all the questions in a page and provide feedback button for each question?While giving the feedback user can ab. to see posted question date and posted person name.
sindu

Hi,
To display all the questions in a page instead of in a dialog, you can achieve it by using such an URL:
http://yoursite/Lists/survey1/NewForm.aspx?IsDlg=0
You can add a hyperlink with this URL into a page of your site, then you can navigate to the questions page by clicking this hyperlink.
About how to add a hyperlink into a page:
http://sharepoint.stackexchange.com/questions/55543/how-to-add-a-hyperlink-anchor-in-a-sharepoint-wiki-page
If you have several questions to ask, it is recommended to post them into every single thread to make others easier to focus on one question in one thread.
Feel free to reply if there is still any questions.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to display all the surveys using content query web part

Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?

Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT

HT1420 how to deauthorise all five more then once a year

how to deauthorise all five more then once a year

You cannot deauthorize all more than once per year.
You can ask Apple for assistance, however, by contacting them via your Account or Support link under Quick Links in iTunes Store.

How to display all data on one page in web app

Hello.
So I have web app JSF (IceFaces framework) + JBoss all Crystal Report working perfectly. So I have page with Crystal Report tags (e.g.
<bocrv:reportPageViewer reportSource="#{crystalReport.reportPath}" ...
in this report I have table with some data (data from DB) and I want to display this data on one page. Unfortunately now this data are moving to the next page and unfortunately I even donu2019t know how switch to the next page (I see only info e.g. 1with 2).
So how to display this data on one page if its impossible how to torn on pagination.

So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

How to display all rows in the report in one page in Oracle APEX 3.2

Friends -
We are using Oracle Applications Express 3.2 on oracle database 10.2.0.5 on solaris environment.
One of our report contains total no of rows 50000. when we ran report by default it is showing 15 and i can go search and change display no of rows to different numbers and click go.
My question is it possible to display all 50000 rows during first time report launching without going to change rows. Is there any option that we can set how many number of rows that we can display during report design.
Please advise
VSH

Hello VSH,
>> My question is it possible to display all 50000 rows during first time report launching without going to change rows
As vee pointed out it is possible, however the question you need to ask yourself is is it wise?
Bear in mind that displaying 50,000 rows on a single HTML page means a lot of code that must be loaded by the client browser all at once. What it will do to your page loading time? Browser memory? Network bandwidth? Also, do you really believe that it is effective to let an end user look for a specific row among 50,000 rows?
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

How to display All the rows in a Table

Hi All,
Our requirement is, we need to display all the records of an VO in a table. We should not have navigation bar with previous and next. Runtime only will come to know how many records the VO has. Is it possible to achieve our requirement using setNumberOfRowsDisplayed() method in OATableBean ?

Do u want to do it declaratively or programmatically.
Declaratively You can set no of rows property of table bean. If u want to set it programmatically then u can do it as discussed in the thread..
Regards,
Ram

How to display all parent regions (repeatedly reference cursor)?

CREATE TABLE regions
PARENT_NAME VARCHAR2(30),
CHILD_NAME VARCHAR2(30)
INSERT INTO regions VALUES(NULL,'Asia');
INSERT INTO regions VALUES(NULL,'Australia');
INSERT INTO regions VALUES(NULL,'Europe');
INSERT INTO regions VALUES(NULL,'North America');
INSERT INTO regions VALUES('Asia','China');
INSERT INTO regions VALUES('Asia','Japan');
INSERT INTO regions VALUES('Australia','New South Wales');
INSERT INTO regions VALUES('New South Wales','Sydney');
INSERT INTO regions VALUES('Canada','Ontario');
INSERT INTO regions VALUES('China','Beijing');
INSERT INTO regions VALUES('England','London');
INSERT INTO regions VALUES('Europe','United Kingdom');
INSERT INTO regions VALUES('Illinois','Aurora');
INSERT INTO regions VALUES('Illinois','Chicago');
INSERT INTO regions VALUES('Illinois','Rockford');
INSERT INTO regions VALUES('Japan','Osaka');
INSERT INTO regions VALUES('Japan','Tokyo');
INSERT INTO regions VALUES('North America','Canada');
INSERT INTO regions VALUES('North America','United States');
INSERT INTO regions VALUES('Ontario','Ottawa');
INSERT INTO regions VALUES('Ontario','Toronto');
INSERT INTO regions VALUES('United States','Colorado');
INSERT INTO regions VALUES('United States','Illinois');
INSERT INTO regions VALUES('United States','Texas');
INSERT INTO regions VALUES('United Kingdom','England');
COMMIT;
Based on the REGIONS table, write a PL/SQL anonymous block that accepts a region name from the user input and display all its parent regions.
right now this is what I have so far:
ACCEPT p_1 PROMPT 'Please enter the region name: '
DECLARE
v_rname regions.child_name%type := '&p_1';
v_count number;
v_counter number := 0;
v_parent regions.parent_name%type;
v_child regions.child_name%type;
cursor reg_cur is
select parent_name, child_name from regions;
BEGIN
open reg_cur;
fetch reg_cur into v_parent, v_child;
select count(*) into v_count
from regions
where upper(child_name) = upper(v_rname);
if v_count = 0 then
dbms_output.put_line(v_rname || ' is not in the regions table.');
else
while reg_cur%found loop
if upper(v_rname) = upper(v_child) then
if v_parent is null then
v_parent := v_child;
dbms_output.put_line(v_count || ') ' || upper(v_parent));
else
dbms_output.put_line(v_count || ') ' || rpad(upper(v_rname), 20) || '<<<<<' || lpad(upper(v_parent), 10));
end if;
end if;
fetch reg_cur into v_parent, v_child;
end loop;
end if;
close reg_cur;
END;
if user inputs 'chicago' my query returns only a single parent. I'm not certain how to keep referencing the cursor so that I could output the rest of the parent_names and child_names until parent becomes null
the output should be:
chicago <<<<< illinois
illinois <<<<< united states
united states <<<<< North america

Hi,
If you have to do this in PL/SQL, then why don't you use Solomon's solution in PL/SQL?
BEGIN
     FOR regions_info IN
               select child_name || ' <<<<< ' || parent_name     AS txt
                   from      regions
                   where      parent_name      is not null
                   start with      child_name      = '&p_1'
                   connect by      child_name      = prior parent_name
     LOOP
          dbms_output.put_line (regions_info.txt);
     END LOOP;
END;
/However, if you want to see what's happening with your code, add some code to make sure you don't get into an infinite loop. I used the local variable v_counter (which you had declared, but not used for anything else) to count how many times you had gone through the loop, and EXIT once you reach 100 times.
Also, add some more calls to dbms_output, so you can see what's going on.
For example:
     else
          v_counter := 0;
          loop
               v_counter := v_counter + 1;
               EXIT WHEN v_counter > 100;
               dbms_output.put_line ( v_child   || ' = v_child, '
                              || v_parent || ' = v_parent in LOOP'
               open reg_cur;
               fetch reg_cur into v_child, v_parent;
               if upper(v_rname) = upper(v_child) then
                    dbms_output.put_line(v_counter + 1 || ') ' || rpad(upper(v_child), 20) || '<<<<<' || lpad(upper(v_parent), 10));
               end if;
               fetch reg_cur into v_child, v_parent;
               close reg_cur;
               v_parent := v_child;
               exit when v_parent is null;
          end loop;
...Make sure you issue the SQL*Plus command
SET   SERVEROUTPUT   ONbefore running this; otherwise, you won't see the output from put_line.
What do you see?
Do you understand why you're in an infinite loop?
Do you really want the cursor to do exactly the same thing every time you call it?
Maybe you should add a parameter to the cursor, which can be used in, say, a WHERE clause.
Edited by: Frank Kulash on Feb 2, 2011 11:50 PM

SS7: How to display all route sets at once, can it be done?

Similar Messages

Maybe you are looking for