SSAS Cube Measures will not display for all associated dimensions in Excel client

Dear All,
Can you please clarify the below query to me?
I have one Calculated Member CM1 and the expression used to calculate is:
([Dimension1].[HierarchyName1].CURRENTMEMBER.Prevmember,[Measures].[Amount]) associated to a Measure Group MG1.
Dimension1 is having two Hierarchies HierarchyName1 and HierarchyName2.
Measure CM1 is used to Calculate another calculated Member CM2 along with other Non Calculated measures and associated to the same Measure Group MG1.
And the Measure Group MG1 is linked to other dimensions, Dimension2 and dimension3 as well.
When I query the cube in Excel Client for the measure CM2, values appears only when the dimension Dimension1.HierarchyName1 is used to view the results.
And values do not appear:
When I do not use any dimensions (Only CM2 used to display in the excel)
When I use Other dimensions linked i.e. Dimension2 and dimension3
And Also does not display any values if the CM2 is used along with other hierarchy of same dimension1 i.e. HierarchyName2
I don understand this concept OR Is this the concept how the tuples work in SSAS MDX?
If a Calculated measure is created using a one of Dimension member, cannot we view that measure value along with other dimensions linked or when we do not use any dimension to view the results in excel?
Can you please help me to understand this.
Thanks in Advance and Regards.

As you explained CM2 depends on CM1.
The dependency for CM1 is "[Dimension1].[HierarchyName1].CURRENTMEMBER.Prevmember".
So to get value for CM1 you need to bring HierarcyName1.
So for CM2 also HierarcyName1
has to be used only then the data will be visible. When HierarcyName1 is used you can play with
the combinations of other dimension as well .
http://www.bifeeds.com

Similar Messages

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

Album artwork not displaying for all albums in Coverflow view

Very interesting problem I'm having. All of my music has album artwork assigned to it and can clearly be seen in the preview pane at the bottom left of the iTunes window. However, not all the albums show up in the new Coverflow feature in iTunes 7. I've been trying to figure out what might be different about these images that would cause them to not show up. Also, the albums that don't show up in Coverflow view don't show up on my iPod nano either; all the other ones are fine though. Any ideas?
17" Powerbook G4 Mac OS X (10.4.7)
Mac OS X (10.4.5)

I'm experiencing the same. It is funny, I can definitely not see something the displayed (or not displayed) graphics have in common. Some were fetched from the iTS, some bought from iTS, some fetched from other locations ...
At first I thought that it might be because of my old but brave little iBook, but if you see the same on an G4, this is probably not the reason.
My library is on an external hard drive connected via FireWire, and it is quite big (almost 15,000 tracks).
Any help is appreciated

Basic html page will not display for my client!

I have built a new website for a client, and I have plonked
it in a folder on his server so that he can view it without it
being live, but when he views it from his office, the url (which is
correct) loads a page stating that the page could not be found. I
have loaded a preliminary design on a different server, and he can
see that. (Just to clarify, I have loaded it on his server because
his server will display php, my servers are windows and don't do
php, that's why it's a preliminary design on my server)
Everybody I have sent this url to can see the new site design
in the sub-folder, it even works on my iPhone, but none of his pc's
in his office can get to the page. Any ideas as to why? As a test,
the home page is currently very basic html, it simply says in h1
'Can you see this?' but still no joy.
There must be something he has on his system that stops his
network for accessing new files on his own website, but what?
Thanks
Mat

matthew stuart wrote:
> I have built a new website for a client, and I have
plonked it in a folder on
> his server so that he can view it without it being live,
but when he views it
> from his office, the url (which is correct) loads a page
stating that the page
> could not be found. I have loaded a preliminary design
on a different server,
> and he can see that. (Just to clarify, I have loaded it
on his server because
> his server will display php, my servers are windows and
don't do php, that's
> why it's a preliminary design on my server)
>
> Everybody I have sent this url to can see the new site
design in the
> sub-folder, it even works on my iPhone, but none of his
pc's in his office can
> get to the page. Any ideas as to why? As a test, the
home page is currently
> very basic html, it simply says in h1 'Can you see
this?' but still no joy.
>
> There must be something he has on his system that stops
his network for
> accessing new files on his own website, but what?
Could it be a Firewall issue?
Dooza

How come my genius will not play for all songs?

I'm trying to figure out why my iTunes/iPod Genius will only create a playlist for some songs, but not all? I have mulitilpy ablums by and artist and Genius will work on some songs but not the others. Why is that? Is there something I need to do, updates, settings, etc.? Thanks

It happens when you download from two or more different Apple IDs often. It says you must waut 90 days before you can play it without wifi. So in 90 days, try to download again.
Good luck!

Bex objects translated text not displayed for all

Hi,
I have an issue in Bex elements language translation in Bex report output,
Translation of Bex elements to PT language has done successfully and few of the Bex elements are getting displayed in PT language, but the problem i am facing is with the Chars / Key figures objects used in Bex (Like: 0GL_ACCOUNT / 0AMOUNT / 0MATL_GROUP...) which are used directly in report, for these objects text is still getting displayed in EN.
When checked in backend tables i can able to see texts for objects with both languages maintained, and when i check the info objects short description from RSD1 by logging with PT language; i can able to see description in PT.
But, in Bex report i am not getting description in PT for these.
Please let me know whether i am missing any setting in between Bex and Backend objects.
Your helpful answers are highly appreciated.
Thanks,
Praveen.

Further to my above query,
We are working on SAP-BW system on 7.3 with SP05.

How can I put ALL my music back into one folder? I have 3 external drives and my music is all over the place. I can't backup my music because it will not search for all my songs.HELPPPPPPPPPPPPPPPPP

How do I move ALL my music in iTunes back to its original space on my desktop. I have music on my desktop, music on an external hard drive and some saved on a flash. I cannot backup my music because I cannot locate it. I have 4 separate music libraries (same songs) but don't know where to begin to get my music and libraries back in order. CAN SOMEONE SHOW ME THE WAY HOME?

Hi there old45,
You may find the information in the article below helpful.
iTunes 11 for Windows: Change where your iTunes files are stored
http://support.apple.com/kb/PH12365
Consolidate your files in the iTunes folder
You can consolidate all the files in your library in the iTunes folder—for example, to make it easier to move your library to a new computer.
Choose File > Library > Organize Library.
Select “Consolidate files.”Files remain in their original locations, and copies are placed in the iTunes folder.
To create folders (Music, Movies, TV Shows, Podcasts, Audiobooks, and so on) inside your iTunes folder, and place all your imported media files in the appropriate folders, select “Reorganize files in the folder ‘iTunes Media.’”
Locate your iTunes files
Do either of the following:
Find out where a file is stored: Select the item in iTunes, and choose File > Get Info. The path to the file is shown at the bottom of the Summary pane (next to Where).
Show the file in Windows Explorer: Select the song, and choose File > Show in Explorer.
-Griff W.

Photoshop CS6 content (pictures, etc) will not display (or only partually) on the stage.

I just purchased and loaded Photoshop CS6. Pictures (actually this is for all content in any layers) will not display at all or only partually display (see picture below). I uninstalled and reinstalled the program but there is no change. The other Adobe products from the Master Suite Collection run fine (Flash, Encoder, etc). I am thinking that my instalation disc may be corrupted. Can you give me any advice?

Most likely the video card driver. Update it in GPU makers website. Need make and model of video card.

Cross References Will Not Display Page Number

Got some documents created in InDesign CS3 (MAC). When bringing them into CS4 (Windows) and trying to create a paragraph cross-reference the page numbers will not display. All the other text in the cross reference ("paragraph", the word "page", etc.) displays correctly. Even the cross reference under the "hyperlinks" toolbar shows nothing (instead of the usual # indicating a page number).
However If I copy some of the same pages into a new document and create a cross reference in it the page number displays correctly. But since it's over 300 pages I really would hate to have to do that!
Any ideas?

Is it maybe because CS3 does not include the cross references function (not a feature until CS4)?
That's a real problem if we use an outside source to create a lot of our documents and they're working in a previous version.

PSE 11, jpg file will not display

in photo editor of PSE11, I open a jpg file but it will not display. All the Tools/actions become active like the picture is there, but it is not visible. Shat am i doing wrong?

If you go down to the bottom of your screen, does it appear in the photo bin? What happens if you double click it there?

Netscape 4.76 not will not display portal page

I understand from metalink document 136120.1 that no 4.7 Netscape browsers are supported.
I have a portal page that will not display for my 4.7x surfers.
Is this remedied by the latest patch? Will it be a problem in v2?
Is it clear that this basically keeps us from using portal for public sites?

Hello,
maybe you could try to rename the user profile, so windows will generate a new profile, when this user logs on to his machine. afterwards you can copy the important data from the renames profile to the new profile. perhaps this eliminates the problem.
if you switch javascript off, you will also get just a small bar from the portal. maybe on this client something is installed, that switches javascipt off?
best regards,
Christian Schebsta

My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

mrdctaylor wrote:
Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
Thanks!
Apple have changed this setting with the Apple TV Software Update 5.1:
About Apple TV (2nd and 3rd generation) software updates
Feature
Summary
Shared Photo Streams
Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
AirPlay
Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
iTunes account switching
Save multiple iTunes accounts and switch quickly between them.
Trailers
Search movie trailers. In the United States, see show times for local theaters.
Screen savers
New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
Main menu
Reorder icons on the second page by holding down the select button on the remote.
Subtitles
SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
Network configuration
Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
Stability and performance
Includes general performance and stability improvements.
If you don't like this, you can leave feedback here: Apple Feedback

IPod 5G Will Not Display iTunes Videos (Must Restart), All Photos Distorted

I own a 30GB iPod 5G which has never worked satisfactorily after I purchased the unit last year. In fact, after several trips last year to the Genius Bar at the Apple 5th Avenue store in New York, Apple replaced my unit with a new (or refurbished) model and the problems diminished somewhat. Within the last week I noticed however that my iPod will not display photos without severe distortion and will not display videos downloaded from iTunes at all (the unit requires a restart if I attempt to play these videos). I had taken the unit to an Apple mini-store at a local (Iselin, NJ) BestBuy and, after he entered the serial number into the support form, was told by an Apple badge employee that my warranty for the unit did not expire until Sept. 28 (which was the date I received the replacement iPod). When I took my unit to the 5th Avenue Apple store, I was informed by a Genius Bar employee (Jay) that my warranty expired on July 6 and Apple would not perform warranty service nor could I purchase the extended warranty. He further informed me that Apple badge employees at Best Buy and CompUSA are not “really” Apple employees.
He wouldn’t call a manager after I requested to speak to one. The only recourse he could offer me was to call the AppleCare 1-800 number, which I immediately did while still in the store. The person at AppleCare (after asking for the serial number) informed me that my warranty didn’t expire until Sept. 28 and if I wanted to I could purchase the extended warranty anytime until that date. I chose not to give my credit card information while standing in the midst of hundreds of customers, but I called the following day (July 14) and was told by the attendant who took my call that my warranty had expired on July 6 and there was nothing he could do to help me.
Evidently, although I have purchased 11 iPods over the course of the last year as gifts for family members (plus 4 speaker-docks plus more iTunes gift certificates than I can count), I do not count as a valued Apple customer. Could someone at Apple please prove me wrong?
HP Pavilion Windows Vista

needed to sync load music videos in the settings

HT1430 My inbox will not display all messages

My inbox will not display all messages

Close the mail app and reboot the iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the mail icon. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I've used FF for years, today it will not open at all on same computer can't sign in bec when I registered Mozilla didn't send me confirmation email I used it on this am.

I added a few add-ons yesterday to FF (I'm on current version). No problem. FF opened normally today until I added a new "user" to my laptop. After that, FF does not open at all, even from my original user account, which is the administrator. I don't think it was the add-ons, but I'm not sure. I deleted the new user account, turned the computer off/on again, rebooted (numerous times) and still FF will not open for me. The FF file is still in the computer (program list), and I still have the icons and it's in the tray. I have a Dell Studio, only 1-1/2 years old, use FF exclusively as my default browser.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

SSAS Cube Measures will not display for all associated dimensions in Excel client

Similar Messages

Maybe you are looking for