SSAS Date Dimension attribute not displaying all members when browsed singly

I have an SSAS Cube database that holds data from 2009 to 2013 (5 years)
There is a Date Dimension in the database which holds a "Calender Period" Hierarchy with the attributes CalenderYear >> Quarter >> MonthYear >> Day .
I am connecting to the cube via Microsot EXCEL
Whenever i try to browse this hierarchy alone in the spread sheet, the first attribute as per the hierarchy shown above i.e. Calender Year does not display all the members, that is confusing the users to assume that the cube is not processed with the latest
data, which is not the case. However as soon as i try to browse any measure with this dimension, the data automatically shows for the latest dates of 2013 as per the expectations.
The perspective that is selected while connecting to the Cube in this case is the one that is by default the one including all the Cube Objects.
Whenever i try to browse the same cube for the same Dimension Hierarchy but in a separate user perspective i get the latest three Calender Years i.e. 2011,2012 and 2013 but not the complete years 2009 to 2013.
When i was browsing this earlier by the original base perspective (which has all the cube objects visible) the Calender Years displayed were 2009,2010,2011&2012 but not 2013 which should be there.
I checked the base view in the DB that is used to create this Dimension, that is fetching the complete data for 2009 to 2013.
I have also verified that this issue is still there if i try to browse the cube from the SSMS.
Can anyone help me to get all the years from 2009 to 2013 (the years for which my cube has data) become visible as soon as i drop it alone into the Spreadsheet?
Thanks
Suvrat

Thanks for your response Muthukumaran.
I did not know about this default measure property of the SSAS cube, it would be nice if you could also tell me how to check which is the default measure for a cube.
I understand your point that if a particular measure group does not have data for a year then that particular year will be skipped as per the default excel settings, which when disabled allowed all the years to be displayed, but in that case every time the
users connect to the cube via excel, they will have to configure this property.
I would like to share the way i resolved this issue:
I went ahead and simply did a Process Full for the Date dimension. The years started to display by default as per the expectations. Now after observing this change, as per my understanding I believe this issue was due to the CACHE of the cube not being updated
for the date dimension. As after each incremental load of the DWH we processed the cube & while processing the cube the dimensions were set for a Process Update and the Measure Groups were set for a Process Full. This caused this issue, and we could resolve
this once the Date Dimension was processed full.
Thanks
Suvrat Rai

Similar Messages

Query not displaying all records when execute it first tme

Hello,
i have an issue with the WEBI report.when i run the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
Could any one tell me why it's not displaying all records when i execute first time.
Thanks in advance for your help.
Regards,
Prathap

Which BOBJ version do you use?
Which kind of data source are you retrieving data from?
Regards,
Stratos

Data Review is not displaying all Entity relationship screens

Hi,
I have an interview which asks the user to input a set of relationships (many to many) for each instance of the entity "the household member". Say if I have three household members: Mem_A, Mem_B and Mem_C, then for each, say, the following relationships are asked:
is parent of
is married to
is sibling of
If I don't select any Target entity for a relationship screen for a particular Source entity, then this screen is skipped from the data review section. Because of this I am unable to re-visit such relationships to select a Target entity during the interview.
Is there any way I can see these relationship screens in the data review? Or access them by some other means during the interview itself?
The data review section only displays those relationship screens for which I had selected at least one target entity.
Thanks,
Aakarsh

We have confirmed this is a limitation in the current version of Oracle Policy Automation.
A possible workaround is that relationships that included are on the same screen as another attribute can be edited if you choose from the data review to go to that attribute.
We are looking at addressing this in a future version.
Davin Fifield

My iPod does not show all tracks when browsing by artist!

I have recently noticed how by iPod isnt showing all the songs when browsing by artist. I have only discovered this problem with one of my artist, but am not sure that the problem occurs elsewhere. The thing is that i have got around 20 tracks performed by this one artist. About 10 of these tracks are from the same album and the rest of the tracks are without album information. So everytime i enter this artist on my iPod, only the tracks from this album is shown. Hence, the tracks without any album details are not to be found under this artist! However, these songs can stil be found when browsing by genre, songs or the like. So obviously they are all on my iPod, but for some reason only the tracks from the mentioned album are to be found when entering the artist.
What can the problem be and how can it be fixed?
Thanks for your help,
Best regards...

There are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
If tracks are missing an Album name in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances but the simplest remedy is just add None or Miscellaneous to all the blanks in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they may not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder.
Message was edited by: Zevoneer

RoboHelp Server 8 Not Displaying All TOCs When Going through the Engine

Hello,
We recently upgraded from X5 to X8 and imported and converted our X5 project to X8 without any problems. After our conversion, we are having TOC issues.
Here is our issue. Not all of our TOCs are displaying when we veiw our project through the engine, but if we view the project directly (without) going through the engine all of our TOCs display correctly. I've tried creating a new TOC and checking the Copy existing Table of Content box and deleting the old TOC and that did not work. I removed the following characters in the TOC (&, <, >,) and that did not work. I also tried deleting a book with topic pages within the book and re-creating the book and adding the topic pages in the book and no solution. It seems like i've tried everything to resolve our issue and nothing has worked so far.Our books have topic pages linked to it.
I've searched the forums and i have not seen anyone else with the same issue. Any help would be greatly appreciated.
Thanks

Hi Ian,
Just zip them up and send them to me in a private message.
Tulika.

Keynote not displaying all text when projecting

updated to the new keynote on my iPad mini. Now all of the text doesn't display (particularly when using the build feature).

Try asking in the Keynote for iOS discussion, this discussion is dedicated to Mac users:
Keynote for iOS

List column drop down not displaying all choices when user has read permissions

One of my co-workers created a workflow with an associated list. I gave a user read permissions to the list but they cannot view or filter all of the choices from a column. For example the column is named STATUS and has 4 choices, COMPLETED, CANCELED,
IN-PROGRESS and NOT STARTED but the user is only able to view the COMPLETED items.

Hi brianti,
For troubleshooting this issue, please provide the followings:
Could other user with full control see all items?
How did you create the list? I am wondering whether you enabled Content Approval in the list. If yes, please go to List settings->Versioning settings, select "Any user who can read items" under "Who should see draft items in this
list? ".
How did your co-worker create the workflow? Please provide the actions that your co-worker used in the workflow.
If you provide the above, it will make others in the forum easy to find a solution for you.
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Table not displaying all column

hi my table>adf table does not display all column when i run the application it only display the first three column but in design it display all column

hi user,
i think so some panelcollection is closely strecthed, so only this problem.
go to panelcollection make it as styleClass=" AFStretchWidth" .
solution:
if you are used panelcollection inside af:table means it will suits.
or else go to the af:table add this
styleClass=" AFStretchWidth"
columnStretching="last"
or else some problem:
please elaborate or else paste the part of the code.

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

Date Format was not displayed correctly

Hi All,
        We are developing WebDynpro Application successfully....but the date format was not displayed correctly.
the RFC Date format is : 05/23/2007
but in webdynpro we are getting date is wrong....we are getting date is : 09/05/2008.
the below one is our coding for date display format.....
public java.lang.String DisplayingDateFormat( java.lang.String date )
    //@@begin DisplayingDateFormat()
                    // Current date Format in BW
SimpleDateFormat sdf = new SimpleDateFormat("MM.dd.yyyy");
String ChangedDateFormat=null;
try{
//Parsing String to Date
Date sqlDate =sdf.parse(date);
Locale userLocale=WDClientUser.getCurrentUser().getLocale();
DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.DEFAULT, userLocale);
//Converting Date to String
String newDateString = dateFormat.format(sqlDate);
ChangedDateFormat=newDateString;
I mention my user country is Germany.
can u tell me any one why we are getting wrong date.....
Really i appreciate.
Thanks and Regards,
Abhiram.

Too bad you can not offer yourself points. LOL

F-90. asset value date field is not displayed

Dear all
In asset acquisition posting through F-90. asset value date field is not displayed at the time of entering acquisition. It is in supress mode. so system is capturing the capitalisation date. But we can see this capitalisation date as asset value date in fb03 display. Now i want to display this field as optional field while creating the entry and also i want to change the field in display mode to change mode. kindly tell me the menu path to access the settings.
Thanks With Regards
RSS.

Hi,
You can enter a diff asset value date for your acq posting, only thru transaction ABSO using TType 100.
This will resolve your issue.
Thanks,
Srinu

DWMX Not Displaying All Files

Hello folks. This is my last attempt to locate a solution for
why my DWMX is not displaying all my files in my local or remote
folder. I have a new client who has put us in charge of moving
their site to a new server. When I create a new site in DWMX, it
allows me to download and upload just fine, ALL of the site.
Problem is, DWMX will only display a certain number of files in
both the local and remote views. In my windows explorer, it shows
all the files, on the new server it shows all the files, but DWMX
will not. The folder in question is the dumping ground for all
their self-managed content images for their site. So it is hard to
split these up into multiple folders and expect the code to work
properly.
Has anyone else experienced this problem? If so, is there a
solution to this problem with DWMX?
Thank you.

Are you using DMX6.0 or DMX6.1? If the former, please update
to the latter
at your earliest opportunity - use the updater on the Adobe
site, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"csnetworks" <[email protected]> wrote in
message
news:fai93r$hj$[email protected]..
> Hello folks. This is my last attempt to locate a
solution for why my DWMX
> is
> not displaying all my files in my local or remote
folder. I have a new
> client
> who has put us in charge of moving their site to a new
server. When I
> create a
> new site in DWMX, it allows me to download and upload
just fine, ALL of
> the
> site. Problem is, DWMX will only display a certain
number of files in
> both the
> local and remote views. In my windows explorer, it shows
all the files,
> on the
> new server it shows all the files, but DWMX will not.
The folder in
> question is
> the dumping ground for all their self-managed content
images for their
> site.
> So it is hard to split these up into multiple folders
and expect the code
> to
> work properly.
>
> Has anyone else experienced this problem? If so, is
there a solution to
> this
> problem with DWMX?
>
> Thank you.
>

Status bar of Oracle from runtime applet is not displaying all of a sudden

Hello,
The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

My console was set to a specific window name..it was not null at all....but the status bar wont show...
But I solved it ...by changing the applet size...
Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
HEIGHT=100%
WIDTH=100%
Thank you all for your help and support...
Edited by: user10746194 on Feb 11, 2010 6:33 AM

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7. Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.
Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

SSAS Date Dimension attribute not displaying all members when browsed singly

Similar Messages

Maybe you are looking for