SSAS performance counters do not appear in Internet Explorer

I created a few SSAS memory related performance counters (eg MSAS 2008:Memory\Memory Limit Low KB, \MSAS 2008:Memory\Memory Limit High KB etc) to monitor memory and saved it as .html (as I have done previously).
When I open this .html file in IE 11, these performance counters do not get loaded.
My machine details are as follows
OS: Windows 8 (64 Bit)
SQL Server 2008R2 (64 Bit)
IE (i believe) is also 64 bit. For reference my IE 11's version is 11.0.9600.17126IS.
Previously these used to work and now only the SSAS counters do not seem to load.
Any help is appreciated.
Thanks
Gautham
Gautham KAMATH

Hi Gautham,
According to your description, you created a few SSAS memory related performance counters and save it as .html, and then open this file in IE 11, the issue is that these performance counters do not get loaded, right?
In your scenario, you said that you IE is also 64 bit, are you sure about it? Normally, we run IE 32 bit. On 64-bit versions of Windows, there is a separate link in the Start Menu to Internet Explorer (64 bit). If there is no mention of 64-bit in the About
IE screen, the 32-bit version is opening. Here is a similar issue with yours, and the reason is related to the version of IE, please refer to the link below to see the detail information.
http://social.technet.microsoft.com/Forums/en-US/dad153fb-7215-480e-abca-15db952de986/why-is-the-ssas-preformance-counter-missing-when-saved-as-html?forum=sqlanalysisservices
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Similar Messages

Image does not appear in Internet Explorer but displays in Firefox

Hi All,
I have an image in my page in the header section.
The problem is that the image displays in Firefox but does not display in Internet Explorer.
Thanks in advance.
Best Regards
Arif Khadas
Application Express 4.0.1.00.03
Edited by: Arif Khadas on Feb 13, 2011 2:29 PM

Hi Jari,
Thanks for the reply.
This is the code that is in the Region Source of the Header Section :
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr width="100%" align="left" valign="top">
<td align="right" valign="top">
   <a href="http://www.bridgesinfotech.com/"
    <img src="#APP_IMAGES#header.jpg" alt="Bridges Information Technology" WIDTH="1000" HEIGHT="125">
   </a>
</td>
</tr>
</table>

Favicon not appearing in Internet Explorer

I have added a Favicon to my site which appears OK in both Firefox and Google Chrome.
However I can't find a way of getting in to display in Internet Explorer.
Comparing it to the coding for my ISP home page it looks to me that it is in the right place.
I know this is nitpicky, but has anyone got any ideas?
My site is www.stayatmyhouse.net (see attached).
Regards
John

Answering my own query, I notice that 'extra code' might be required to achieve this in IE6 or higher, can anyone confirm this?
However, after clearing my browser cache I notice that the Favicon image is appearing next to the site in my favourites, so I'm getting there slowly.
John

Microsoft adcenter ad titles appear in internet explorer but not in firefox in English

Microsoft adcenter ad titles appear in internet explorer but not in firefox in English
Tried Microsoft help but so far unable to identify problem.
Thought it might be connected to java but removal of java makes no difference
Starting in safe mode resolves problem but about 500 add ons suspected

If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See [[Troubleshooting extensions and themes]]
* If you have many extensions then you can first enable half of the extensions to test which half has the problem.
Continue to divide the bad half that still has the issue until you find which one is causing it.

The Header in my home page is truncated. My home page Header is cut off. The header appears in Internet Explorer, but not in Mozilla Firefox 3.6.13. How to make the header display in Firefox?

The Header in my home page is truncated. My home page Header is cut off. The header appears in Internet Explorer, but not in Mozilla Firefox 3.6.13. How do make the header display?

(Images or animations do not show) worked well.

When I respond to an email (through hotmail), the initial email does not appear in my response. This does not happen with internet explorer where I can see the email I am answering. I would like this to happen with Firefox. It used to.

I use Firefox for my emails (hotmail). When I respond to an email, it does not appear under my response as it used to. This does not happen with internet explorer.
== This happened ==
Not sure how often
== about a month ago

Hello Jack.
See this support article:
http://support.mozilla.com/en-US/kb/Websites+look+wrong
I hope it helps.

IWeb Page Navigational Links not working with Internet Explorer 7

I'm hoping someone can help me out here? My wife created her 1st website using iWeb. I am testing the sites functionality before we publish it. All the pages and links work fine on Firefox and Safari for windows. However, the page navigational links are not working on Internet Explorer 7. All I see is a dot to the left side of where the page links should be. When I start the site in IE7 I get an Active X script warning and I am asked if I want to allow the script to run; to which I reply yes. After I allow the Active X script the dot to the left side of where the page links should be disappears, but the links do not appear.
Is there anyway to resolve this? Most of the members of her club have Windows based PCs and are using IE7.
Message was edited by: cviz821

Yes, Javascript is running on IE7 and other java script applets appear to be working with the exception of the Navbar script.
It would be great if my wife's friends used a "real" browser, unfortunately 70% of the people on the web use IE7, so this is a real concern if we can't get this to work. I'v seen other iWeb site on IE7 that seem to function fine, so I'm not sure what the issue is here.
Message was edited by: cviz821

Webpage does not show in Internet Explorer but does show in all other browsers?

I have created a webpage, www.nqms.co.uk, it does not show on Internet Explorer. I have tried to troubleshoot via the net and have used a CSS check program etc. but it still won't appear. Any help would be gratefully received.

Add the closing --> comment tag to your css section before the closing </style> tag (see below)
.style3 {font-size: 8pt}
-->
</style>

AOL Broadband, will connect to laptop, but not connect to internet explorer. WRT54GS v.6

I can connect to my wireless network via my laptop, but not to internet explorer. We have changed every setting imaginable and re-set the modem, router many times. We Ip configed, did ping tests, installed and re-installed the card in the laptop. Done all this 4 times with the tech support from Linksys. Finally, I realized it must the wireless router and/or modem configuration. (The laptop works on every other network in town except ours, and has not security settings enabled).
I have been on customer service calls for 2 weeks, with AOL and linksys and nothing seems to be helping me. I have 2 wireless routers (thought the first was bad, so bought another brand new), and just had a brand new modem installed. Basically, I have brand new equipment.
The laptop has no security settings and connect to any wireless network in town. It finds the connection to my WRT54GS v.6, but will not connect via internet explorer.
I want to uninstall and re-install the router. How do I uninstall the router? (I have instruction for re-installation). Also AOL rep told me, to make sure I configure the router to a certain port range. Any ideas as to how to do this?
Anyone have problems with AOL high speed and linksys router? Has the high speed cable cord coming out of the wall, not ethernet or DSL.
We have changed the settings in http://192.168.1.1 till I am blue in the face. None of the channels worked, security didn't work, adding the ip address manually to the laptop didn't work. I am getting no error messages. Am trying to get this wireless modem working because I need it. Should have come to this forum first!

hi..if you want to uninstall the router...the only thing you need to do is hold the reset button down for 30 seconds...
i m a bit confused here as to why the ISP techs asked you to forward ports on the router...port forwarding is needed for a specific application or a device that is behind the router....
the mentioned ports are for AOL messenger ( AIM )....and has nothing to do with the modem...anyways , let us work out together on this issue...carry out the steps i mention and you can revert back with the results and your success rate...
1) connect the computer to the modem and check what ip address you have on the computer ??
2) go to start -> control panel -> network connections ->
let me know what other icons you have besides Local Area Connection and Wireless Network Connection..
3)connect the computer to the router and the router to the modem...
access the router using http://192.168.1.1 .. let the internet connection type be on DHCP....check the ip address on the status page of the router ui...
4) if it is 0.0.0.0 , go to setup tab and go to mac address clone subtab , enable it and hit clone..save the settings and do a power cycle...
5) check whether you have the ip address...if you have the same ip as coming off of the modem..u should be online and if still 0.0.0.0 , then select PPPoE for the internet connection type and enter the username and password...check whether the ip address comes up....if still negative, ensure that the modem is in bridge mode...
6)if the ip address comes up as 192.168.1.x , change the local ip add of the router to 192.168.2.1 and do a power cycle..
let me know for any help !!!

Gallery slideshow not showing in Internet Explorer

I am new to Dreamweaver.
I created a slideshow in Photoshop's Gallery section and used a div and iframe per tutorial instructions.
I use a MacIntosh. It looks great on Firefox and Safari.
It is not working in Internet Explorer.
Please advise.

Does this help?
<HTML>
<HEAD>
<META NAME="GENERATOR" CONTENT="Adobe PageMill 2.0 Mac">
<TITLE>Browns Photography's Children's Gallery</TITLE>
<style type="text/css">

</style></HEAD>
<BODY BGCOLOR="#ffffff" BACKGROUND="background.gif" text="#000000" link="#330099" vlink="#666666" alink="#660000">
<TR>
<TD WIDTH="100%"><CENTER>
<p> <IMG SRC="images/logo.gif" ALIGN="BOTTOM" BORDER="0"></p>
            <p align="center"><font face="Arial, Helvetica, sans-serif" size="-1"><img src="images/childrens.gif" width="208" height="37"></font></p>
           <p align="left">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<title>
</title>
<meta http-equiv="Content-Type" content="text/html; charset=macintosh">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
      <div id="childrengallery"><a href="childrengallery/">
      <iframe src="childrengallery/index.html" width="800" height="75%" frameborder="0" name="childrengallery"></iframe>
      </a></div>

Mostly websites are not open on internet explorer and other browsers in my laptop

mostly web sites are not open in internet explorer and other web browsers in my laptop.

Rob,
Many thanks for your reply. It is appreciated greatly. I have added text against each of the points that you raise.
troubleshooting Addons is somewhat complex.....as from this side we do not know which addon may be causing the problem, so the
only recourse is to disable the types of addons that commonly cause problems in IE (for security and usablility reasons some older addons that you may have used previously with IE8/XP are no longer compatible with newer versions of IE that you are now using)....
The following instructions will stop your Toolbar and Browser Helper addons from loading in IE.
Start>Control Panel>Internet Options>Advanced tab,
uncheck "enable third-party browser extensions".
close any open IE windows and restart IE for the changes to take effect.
[GotaQ: Yes, did this but the problem then is that IE won’t open for me. There is no icon in the start menu or task bar
and routes such as using a command prompt or ‘run’ instruction don’t work. When I try this I get a window on screen that flickers for a bit and then disappears.]
Alternatively, your problem with keyboard input is most likely being caused by a form filling addon or a finger print reader
addon? Note: some addons like the Google toolbar have multiple features like form filling, you can disable the GTB's form filling features from its settings dialog (click the 'spanner' icon on the toolbar)
Use Tools>Manage Addons>Show all addons to locate any such addons and use the Addons Manager to disable them. (close and
reopen any open IE windows for the full changes to take effect).
[GotaQ: I tried disabling all of the add-ons in Google Chrome and the key-stroke mapping problem persisted, unfortunately!]

Help Flash player will not run in Internet Explorer 11?

I have downloaded Adobe Flash Player and it will not run in Internet Explorer 11. I have done the things suggested in the help/forum section. What else can I try?

This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

[svn:osmf:] 10676: Removing JavaScript getters and setters: Wei found out that these are not supported by Internet Explorer.

Revision: 10676
Author:   [email protected]
Date:     2009-09-29 07:06:03 -0700 (Tue, 29 Sep 2009)
Log Message:
Removing JavaScript getters and setters: Wei found out that these are not supported by Internet Explorer.
Modified Paths:
    osmf/trunk/apps/samples/framework/HTMLGatewaySample/html-template/index.template.html
    osmf/trunk/framework/MediaFramework/org/openvideoplayer/gateways/HTMLGateway.as

Hello ZeroThirtySeven,
Do you mean that you want to use group policy to make users can visit the web application in Internet Explorer version 7?
Enterprise Mode, a compatibility mode that runs on Internet Explorer 11 on Windows 8.1 Update and Windows 7 devices, lets websites render using a modified browser configuration that’s designed to emulate Internet Explorer 8.
We could check if the web application can run in the Enterprise mode.
If it can, please take a look at the following article to use group policy to turn on Enterprise Mode.
http://msdn.microsoft.com/en-us/library/dn640699.aspx
Please take a look at the following thread about set IE compatibility mode by group policy.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/95c0b8e6-72b5-472f-a5cb-07b17a8294a1/ie-compatibility-mode-not-applying-via-group-policy
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Inserted html not showing in Internet Explorer

Inserted html code does not show in internet Explorer 8. Is OK with Firefox, Safari and Chrome. Site is munroestudios.com. Also made a a test page with just the html on munroestudios.com/test.html. This is a iframe code received from another company to link to another site.

I'm not sure what they did but the company supplying the html code fixed something on their end. Works now.

Lessons: Extend step 5 of 7 not working on Internet Explorer 11

Hello I using Edge Animation CC Trial, I starting to learn directly from application. Everything is good until I found out Lesson: Extend step 5 of 7 not working on Internet Explorer 11 (Lasted version on Windows 8.1). The Playback/Stop trigger not work for Stage. But when I try use Chrome, it working well.

Oh and just to show how things look like with the problem, it's like this:
And this is what it's supposed to look like:
So yeah, the whole space just turns empty - I can still click on blank spaces and it leads me to the appropriate links (though I have no clue what links I am actually clicking on in IE9, it only shows up for google chrome
I'm looking forward to constructive replies~ Hopefully someone would see this soon

SSAS performance counters do not appear in Internet Explorer

Similar Messages

Maybe you are looking for