SSC web control problem with Crossover
Hey i've installed Crossover to work with a control...and this one sscwebcontrol will not work. any advice? is there a program that I can download through crossover to get it working?
You should probably contact Crossover support. If the app is not supported by Crossover then you'll probably need to install Windows on your Mac via Boot Camp or Parallels.
Similar Messages
-
Office Web Apps Server 2013 - Word Web App - Problem with Tab space
Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-TomYes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral -
Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...
When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS sectionAbout your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to;<BR><BR>about:home (Firefox default home page),<BR>
about:newtab (shows the sites most visited),<BR>
about:blank (a blank page),<BR>
or you can enter any web page you want.<BR><BR>
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''. -
ISE 1.2 web authentication problem with wired clients
Hello,
i am having problems with centralized web authentication using a Catalyst 3650X with IOS 15.0.2 SE01 and ISE 1.2.
Redirecting the client works fine, but as soon the client opens a web browser and ISE websites open to authenticate the client, the switch port resets, the authentication process restarts and the session ID changes. After the client enters the credentials a session expired messages appears on the client and i get an 86017 Session Missing message in ISE.
here the output form the debug aaa coa log.
Any ideas
thanks in advanced
Alex
! CLIENT CONNECT TO SWITCHPORT
ISE-TEST-SWITCH#show authentication sessions interface gi0/3
Interface: GigabitEthernet0/3
MAC Address: 001f.297b.bd82
IP Address: 10.2.12.45
User-Name: 00-1F-29-7B-BD-82
Status: Authz Success
Domain: DATA
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
Vlan Policy: N/A
ACS ACL: xACSACLx-IP-PERMIT_ALL_TRAFFIC-537cb1d6
URL Redirect ACL: ACL-WEBAUTH-REDIRECT
URL Redirect: https://nos-ch-wbn-ise1.nosergroup.lan:8443/guestportal/gateway?sessionId=AC1484640000026B28C02CDC&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: AC1484640000026B28C02CDC
Acct Session ID: 0x0000029C
Handle: 0x8C00026C
Runnable methods list:
Method State
dot1x Failed over
mab Authc Success
! CLIENT OPENS INTERNETEXPLORER -> REDIRECTS TO ISE
! SWITCHPORT GOES IN ADMINISTRATIVE DOWN STARTS AUTHENTICATION AGAIN
ISE-TEST-SWITCH#
191526: .Jun 24 10:42:24.340 UTC: COA: 10.0.128.38 request queued
191527: .Jun 24 10:42:24.340 UTC: RADIUS: authenticator 7F A9 85 AB F6 4A D0 F3 - B4 E6 F2 56 74 C6 2D 33
191528: .Jun 24 10:42:24.340 UTC: RADIUS: NAS-IP-Address [4] 6 172.20.132.100
191529: .Jun 24 10:42:24.340 UTC: RADIUS: Calling-Station-Id [31] 19 "00:1F:29:7B:BD:82"
191530: .Jun 24 10:42:24.340 UTC: RADIUS: Acct-Terminate-Cause[49] 6 admin-reset [6]
191531: .Jun 24 10:42:24.340 UTC: RADIUS: Event-Timestamp [55] 6 1403606529
191532: .Jun 24 10:42:24.340 UTC: RADIUS: Message-Authenticato[80] 18
191533: .Jun 24 10:42:24.340 UTC: RADIUS: E0 3C B2 8C 89 47 67 A8 69 F5 3D 08 61 FF 53 6E [ <Ggi=aSn]
191534: .Jun 24 10:42:24.340 UTC: RADIUS: Vendor, Cisco [26] 43
191535: .Jun 24 10:42:24.340 UTC: RADIUS: Cisco AVpair [1] 37 "subscriber:command=bounce-host-port"
191536: .Jun 24 10:42:24.340 UTC: COA: Message Authenticator decode passed
191537: .Jun 24 10:42:24.340 UTC: ++++++ CoA Attribute List ++++++
191538: .Jun 24 10:42:24.340 UTC: 06D96C58 0 00000001 nas-ip-address(600) 4 172.20.132.100
191539: .Jun 24 10:42:24.349 UTC: 06D9AC18 0 00000081 formatted-clid(37) 17 00:1F:29:7B:BD:82
191540: .Jun 24 10:42:24.349 UTC: 06D9AC4C 0 00000001 disc-cause(434) 4 admin-reset
191541: .Jun 24 10:42:24.349 UTC: 06D9AC80 0 00000001 Event-Timestamp(445) 4 1403606529(53A95601)
191542: .Jun 24 10:42:24.349 UTC: 06D9ACB4 0 00000081 ssg-command-code(490) 1 33
191543: .Jun 24 10:42:24.349 UTC:
191544: .Jun 24 2014 10:42:24.365 UTC: %EPM-6-IPEVENT: IP 10.2.12.45| MAC 001f.297b.bd82| AuditSessionID AC1484640000026B28C02CDC| AUTHTYPE DOT1X| EVENT IP-RELEASE
191545: .Jun 24 2014 10:42:24.382 UTC: %EPM-6-IPEVENT: IP 10.2.12.45| MAC 001f.297b.bd82| AuditSessionID AC1484640000026B28C02CDC| AUTHTYPE DOT1X| EVENT IP-WAIT
191546: .Jun 24 2014 10:42:24.382 UTC: %EPM-6-POLICY_REQ: IP 0.0.0.0| MAC 001f.297b.bd82| AuditSessionID AC1484640000026B28C02CDC| AUTHTYPE DOT1X| EVENT REMOVE
191547: .Jun 24 2014 10:42:24.390 UTC: %EPM-6-AUTH_ACL: POLICY Auth-Default-ACL-OPEN| EVENT DETACH-SUCCESS
191548: .Jun 24 2014 10:42:26.353 UTC: %LINK-5-CHANGED: Interface GigabitEthernet0/3, changed state to administratively down
191549: .Jun 24 2014 10:42:27.359 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/3, changed state to down
ISE-TEST-SWITCH#
191550: .Jun 24 2014 10:42:36.366 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet0/3, changed state to down
191551: .Jun 24 10:42:40.592 UTC: AAA/BIND(000002A7): Bind i/f
191552: .Jun 24 2014 10:42:41.129 UTC: %AUTHMGR-5-START: Starting 'dot1x' for client (001f.297b.bd82) on Interface Gi0/3 AuditSessionID AC1484640000026C28C2FA05
191553: .Jun 24 2014 10:42:42.580 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet0/3, changed state to up
191554: .Jun 24 2014 10:42:43.586 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/3, changed state to up
! SESSION ID CHANGES, USER ENTERS CREDENTIALS
! ERROR MESSAGE AT CLIENT "YOUR SESSION HAS EXPIRED"
! ERROR MESSAGE IN ISE "86017 SESSION MISSING"
ISE-TEST-SWITCH#show authentication sessions interface gi0/3
Interface: GigabitEthernet0/3
MAC Address: 001f.297b.bd82
IP Address: 10.2.12.45
Status: Running
Domain: UNKNOWN
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-auth
Oper control dir: both
Session timeout: N/A
Idle timeout: N/A
Common Session ID: AC1484640000026C28C2FA05
Acct Session ID: 0x0000029D
Handle: 0x2C00026D
Runnable methods list:
Method State
dot1x Running
mab Not runGuest authentication failed: 86017: Session cache entry missing
try adjusting the UTC timezone during the guest creation in the sponsor portal.
86017
Guest
Session Missing
Session ID missing. Please contact your System Administrator.
Info -
User Account Control Problems with Premier Elements 7 32 bit in 64 Bit Windows 7
I found User Account Control Problems in other forums but didn't see much in Premiere Elements, so I hope this helps others who may be having problems with 32 bit programs in a 64 bit computor. When I first got my 64 bit I didn't have problems.
Back in February I bought a Quad Core Desktop with Windows 7 64 bit. Haven't been on the forum for 7 months since I wrote in regarding importing video with the Pyro AV Link (Premiere Elements Tips and Tricks). I was having problems importing video which started after March 28 sometime, as that was the last time I didn't have a problem importing VHS. Took me a few months off and on to find out what worked.
I started uninstalling Windows updates and any programs I had installed back to that point in time. Checked after uninstalling each item. The capture screen would come up on a delayed basis but clicking on capture did nothing. Although no driver is required for IE1394 (so they say) I read where some people using the Legacy driver had fixed some problems, so I switched to the Legacy. Seemed to work great (for a few minutes).
I had even uninstalled and reinstalled PE7 but no difference. Finally I noticed a shield in the PE7 Desktop icon. Thats weird. Never had that before. Just decided to show up after I had done all of the stuff I mentioned. Turns out at some point in time since I've had the computor Windows 7 decided to flag my 32 bit program as misusing the 64 bit system. User Account Control. I never bothered too much with UAC and just clicked on the yes box wen it popped up asking if I wanted this or that to take control of my computor. I tried using the minimum setting for safety reasons, and then finally turned User Account Control off. Bingo! PE7 capture works again and still working.
While I am not recommending that people arbitrarily turn UAC off, this appeared to be my problem. I would recommed that they try turning it off before uninstallin a bunch of stuff. Having a restore point may or may not have been a fix for me. I think one of the Windows Updates caused the problem but I am not going to uninstall any more stuff at this point, I have not been back on the internet or installed any more updates in my desktop. I am going to use my laptop for internet and used the desktop for video.
I am guessing this could be a problem for any 64 bit systems trying to use 32 bit programs. IE: XP,Vista,Windows 7 64 bit. In Vista there is also Data Execution Prevention (DEP) which you can turn on or off, supposedly to prevent misuse of memory (as I understand it), but Win7 either doesn't have it or I haven't found where it's located.
Maybe this has been covered in the forum somewhere and I missed reading it. Hope I am not too confusing. Anyway, whatever feedback you guys have would be great.John,
Thanks for your answer, and I did check out the link you suggested. However, I have Windows 7 Home Premium as most people have I think, and the XP program was not available. I started with Vista and now have Win 7. I never could navigate around in XP anyway so am content to just leave User Account Control off.
Interesting side note to turning UAC off is that my desktop seemed to be using more of the CPUs, where half of them were "Parked" as I wrote in also about 7 months ago when I 1st got my desktop. I am pleased to say that video processing seems to go quicker with UAC off. Have to observe things some more to confirm.
I just thought if others were having problems after installing Windows Updates and leaving UAC off worked then they could possibly pinpoint a problem. -
Localizing Analytics Web Catalog - problem with variables
I tried to localize strings in OBI EE Web Catalog. I exported those captions using catalog manager, translate messages in XML file and put them to \Web\Res\l_xx\Captions. It works quite good.
But there is problem with variables in Title. Replacement of variables STOP working :-( At the page is displayed for example: "@{biServer.variables['MaxDate']}". Variable replacemen works fine in narrative views.
Do you have some ideas?
Thanks.We have the same problem with presentation variables in titles using externalize strings option, they stopped working after tranlation.
We tried with Oracle BI EE 10.1.3.2.1 and 10.1.3.3.3 with same result.
Any ideas?
Thanks -
Game controll problem with keyAdapter
hi folks,
I have build an game in which i want to move the player sprite with the W,A,S,D keys(use them as arrows as in maby games). It works fine, but for example: when i walk up(w) en press then (a) to walk diagonal across the screen the sprite hangs for an moment. before it actualy does go diagonal across the screen. How can i get this movement without any hanging?
I got the following code in my application: (where up, down, left and right are instance variables)
private void activateGameControlsKeys(){
addKeyListener(new KeyAdapter(){
public void keyPressed(KeyEvent e){
int keyCode = e.getKeyCode();
if(!isPaused&&!gameOver){
if(keyCode == KeyEvent.VK_W){
up = true;
if(keyCode == KeyEvent.VK_S){
down = true;
if(keyCode == KeyEvent.VK_A){
left = true;
if(keyCode == KeyEvent.VK_D){
right = true;
if(up){
player.movePlayer("W");
if(down){
player.movePlayer("S");
if(left){
player.movePlayer("A");
if(right){
player.movePlayer("D");
public void keyReleased(KeyEvent e){
if(!isPaused&&!gameOver){
int keyCode = e.getKeyCode();
if(keyCode == KeyEvent.VK_W){
up = false;
}else if(keyCode == KeyEvent.VK_S){
down = false;
}else if(keyCode == KeyEvent.VK_A){
left = false;
}else if(keyCode == KeyEvent.VK_D){
right = false;
});Hope someone can help me out..
Greetz,hi folks,
I have build an game in which i want to move the
player sprite with the W,A,S,D keys(use them as
arrows as in maby games). It works fine, but for
example: when i walk up(w) en press then (a) to walk
diagonal across the screen the sprite hangs for an
moment. before it actualy does go diagonal across the
screen. How can i get this movement without any
hanging?
I got the following code in my application: (where
up, down, left and right are instance variables)
private void activateGameControlsKeys(){
addKeyListener(new KeyAdapter(){
public void keyPressed(KeyEvent e){
int keyCode = e.getKeyCode();
if(!isPaused&&!gameOver){
if(keyCode == KeyEvent.VK_W){
up = true;
if(keyCode == KeyEvent.VK_S){
down = true;
if(keyCode == KeyEvent.VK_A){
left = true;
if(keyCode == KeyEvent.VK_D){
right = true;
if(up){
player.movePlayer("W");
if(down){
player.movePlayer("S");
if(left){
player.movePlayer("A");
if(right){
player.movePlayer("D");
public void keyReleased(KeyEvent e){
if(!isPaused&&!gameOver){
int keyCode = e.getKeyCode();
if(keyCode == KeyEvent.VK_W){
up = false;
}else if(keyCode == KeyEvent.VK_S){
down = false;
}else if(keyCode == KeyEvent.VK_A){
left = false;
}else if(keyCode == KeyEvent.VK_D){
right = false;
});Hope someone can help me out..
Greetz,Wait, what?
Your making it to complicated. Anyway, it would be easier if you did this:
private void activateGameControlsKeys()
{ addKeyListener(new KeyAdapter(){public void keyPressed(KeyEvent e)
{ int keyCode = e.getKeyCode();
if(!isPaused&&!gameOver)
{ if(keyCode == e.VK_UP)
{ //Execute code here }
if(keyCode == e.VK_DOWN)
{ //Execute code here }
if(keyCode == e.VK_LEFT)
{ //Execute code here }
if(keyCode == e.VK_RIGHT)
{ //Execute code here }
} } } ); }I think i got the right amount of { things...
Anyway, execute the code within the keyPressed code, it's much easier. Believe me, I know. And the code won't repeat itself if you don't have the keyRelease code. And I have the same problem with the sprite hanging, it's just the way the code executes. I tried to find a way around it, but with no luck. I hope my revision of your code helps some.
Message was edited by:
g@m3r -
Previewing web page problems with Windows Vista
Just wonderering if there is anyone who can solve a problem I
have with Windows Vista, It wont let me preview my pages being made
in Dreamweaver...I get a pop with a navcancl message...
Can you help please as I am seriously thinking of going back
to Windows XP...
CreativeNo, but really - what's the message? I'm developing under
Windows Vista and
DW CS3 and never had an errors with previewing.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Blog:
http://avenuedesigners.com/blog/
Web dev articles, photography, and more:
http://sourtea.com
=============================================
Proud GAWDS member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Shane H" <[email protected]> wrote in
message
news:f3tcg3$mvk$[email protected]..
> Yeah, all the errors drove me nuts. I'm all the way back
to developing on
> Windows 3.1, now.
>
> --
> Shane H
> [email protected]
>
http://www.avenuedesigners.com
>
> =============================================
> Blog:
>
http://avenuedesigners.com/blog/
>
> Web dev articles, photography, and more:
>
http://sourtea.com
> =============================================
> Proud GAWDS member
>
http://www.gawds.org/showmember.php?memberid=1495
>
> Delivering accessible websites to all ...
> =============================================
>
> "htmlgirl" <[email protected]> wrote in
message
> news:f3ssbi$5va$[email protected]..
>> Just wonderering if there is anyone who can solve a
problem I have with
>> Windows
>> Vista, It wont let me preview my pages being made in
Dreamweaver...I get
>> a pop
>> with a navcancl message...
>>
>> Can you help please as I am seriously thinking of
going back to Windows
>> XP...
>>
>> Creative
>>
> -
OIM 11G- Web Console- Problem with "Export Deployment Manager File"
Experts,
I am using gogle chrome browser on oim11g setup.
I was able to Import/Export the objects using Import/Export Deployment Manager File.
The reason why I opted for chrome is that I was unable to connect to login to the web console, it was just asking for userid and password and after some time, the browser(Internet Explorer 7) hangs on.
And with FireFox 5.0.1, it is the same thing both import and export deployment manager file windows opens as soon as I click and they just close after 2-3 seconds.
The problem now is after updating the java to "Version 6 Update 26 ", the Export Deployment Manager File stopped working. The window pop-ups and closes in 2 seconds.
But Import Deployment Manager File is working fine with out any problems.
The pop - up blocker is not enabled.
And I am sure that it was working fine earlier with chrome before the java update.When I remove the updated java version, chrome is asking to download the latest java version.
Any suggestions, that helps to work with chrome or firefox or IE?
Edited by: Venu on Aug 11, 2011 4:46 PM
Edited by: Venu on Aug 11, 2011 4:57 PMVenu,
I have never had any luck getting anything after Version 6 update 23 to export properly. I would remove your updated Java and restore to a previous version of Java.
Sunny Tsang -
Controlling- Problem with Assigned
Hi
I have the following problem:
I implemet the budget control through customizing.
I start to creat internal orders and i settlement the original budget.
Then i continued working as normal creating PO, invoices etc, all against the internal order.
When i go to KO22 to see the original budget and the assigned, in some orders, the assigned is upper than the budget (its wrong becuase i implement the Bugdget controlling for internal orders). And in some cases the commitments plas the actual postings is upper than the assigned (its is wrog becuase the assigned is form by the commitments and actual postings).
I dont know why it happend.
Please if someone have a similar problem or know about this issue, please help me.
Thanks in advance for your help
EnzoCommitments and actual postings can exceed budget if tolearnce limt for 100% of usage is set up at warning / information i.e. it will allow to post additional costs /create PO against the order with information / warning message to the user.
Check the tolearnce limit in customizing and it should be level '3' (error message) against 100% usage.
Assigned value should be equal to actual & commitments. You can 'Set up Availability Control again' (KO31) to reconstruct the database for the orders with error.
Regards, -
OEM from a web browser problem with 8i
I'm trying to run OEM via the web browser. I installed Oracle 8i EE (8.1.7) many months ago but cannot get these tools to run in a browser. When I enter the URL http://<machine>:3339/oem_webstage/emwebsite.html I am presented with the options to start OEM Console, DBA Studio or SQL Plus Worksheet. I enter the name of the Oracle Management Server, but when I click one of the OEM options on the page I get a dialog box asking me to Open or Save a file called "oemapp_cgi". The Oracle HTTP server is running fine on the server. I've installed Jinitiator okay.
I noticed in some old documentation that it mentions the Oracle Application Server Listener. This doesn't appear in my list of Services in Control Panel on the server. It also mentions using "emwebsite start" and "emwebsite stop", but again, I can't locate any such program on the server. I inserted the installation CD again, but all components appear to be already installed.
My client machine is running Win2000 SP2, IE5.0
Thanks in anticipation!
DarrenOracle managment server must be up and running to do so plus that you need to use Jinitiator Version 1.1.8.10 , I tried other versions but it dows not work.
Use : http://localhost:3339 -
BI 7 Web Templates: Problems with csv-export
Hi all,
I am aware that a csv-export out of a web template is associated with excel, meaning that the export in csv opens in excel.
Nevertheless my problem is, that in the course of the export process several blank columns are inserted.
So when I afterwards open the file with the "windows editor" for example I have a result like
PLZ;;;45133 where I expected
PLZ;45133
Has anyone an idea?
Best regards
MarkHello,
Is there a hierarchy involved?
If yes, then the blank spaces are inserted due to the hierarchy. When the hierarchy is drilled down, the blank spaces are inserted to show the hierarchy structure. Unfortunately, this is standard and cannot be changed using standard BW functionality.
Thanks,
Michael -
Volume control problem with 30GB iPod 3G, Universal Dock, and Apple Remote
I just hooked up my 30GB iPod 3G to the Universal Doc and tried the my new Apple remote. The only buttons on the remote that work in controlling my iPod while on the dock are the play/pause and the skip forward and back buttons.
For some reason the volume up and down buttons don't adjust the volume on my iPod while it's on the dock. Any ideas? Shouldn't the volume up and down work? Or do they only work on the newer iPods?
Any info appreciated.
17' Aluminum Powerbook Mac OS X (10.4.3) 30GB iPod 3G
17' Aluminum Powerbook Mac OS X (10.4.3)btabz,
Thanks for your response. No the iPod doesn't respond at all--the volume display doesn't come up or change.
When I press the play/pause or either skip forward or back on the remote, the iPod, while on the dock, lights up and responds to the command as it should. But when I press volume up or down on the remote the iPod does not respond at all.
According to Apple's store info on the remote, the volume up/down controls should work. I am wondering if maybe it doesn't work with the 3Gs for some reason. But if that is the case, Apple should indicate that. It is kind of frustrating to not be able to adjust the volume.
Thanks,
gerb38
17' Aluminum Powerbook Mac OS X (10.4.3)
17' Aluminum Powerbook Mac OS X (10.4.3) 30GB 3G iPod -
CS6 Design & Web Premium problem with instalation on Win 7
Hi, after I have download CS6 Design & Web Premium and click on Set-up.exe, appeared me a window when was written that the instalation can not be started and I must download an aplication -
Adobe Support Advisor which is not now avaiable -> link - Adobe - http://www.adobe.com/support/loganalyzer/.
Please help...
*I have a orginal program for 2 computersKubins I would recommend reviewing your installation log to determine the exact error message. The Adobe Support Advisor has been discontinued.
You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.
If you need to download a fresh copy of the installation files they are available at Download CS6 products. -
ActiveX control Problem with Froms 6.0.8.11.3
Hi,
I am using Oracle Forms 6.0.8.11.3 version on windows XP.
I am inserting the activex object in the layout and when runing the form the object is not shown.
After that when i am checking in the design (FMB) file the object is not shown and asking me to reinsert the object.
Can any body guide me on this? Is there any bugs are there related to this ?
Thank you
GouriYup - Sounds like 593051 which is to do with the licence information used by the ActiveX not being correctly stored with the control. This is fixed in 6.0.8.15.1
Maybe you are looking for
-
Additional field in report layout
Dear Experts, In t code me2j (ALV format) there comes option change layout. when we click on this, we found displayed column and hidden column. if i want add one extra column in hidden column. how can I Add this. this extra column is related to repo
-
Problem in updating field in databse
Hi experts I have internal table i_lips I need to update a single field in lips table on certain condtions I have tried this code but performance is too low .. Loop at i_lips. If i_lips-kostl NE i_lips-ikostl. Update lips ser kostl = i_lips-ikostl
-
Partner determination for sales doc header
Dear all I assigned 2 SH to 1SP in customer master but in sales order system allowing manually to select any SH which is not assigned to SP. waiting ur reply
-
a href="D:\myfile.htm" does not work-unlike IE, it requires added "file://"
I have a number of html pages with references to other html pages on another drive. They work well with IE, but fail with FireFox. The sources have links coded like: <a href="D:\myfile.htm"> But Firefox requires: <a href="file://D:\myfile.htm"> Simil
-
When i boot my cd to install mac ox a lock logo appers in the screen. help what will i do?
when i boot my cd to install mac ox a lock logo appers in the screen. help what will i do? macbook pro thanks for the help..