SSCC Extension Digit

Hi,
We need to make use of the extension digit of SSCC encoding type but unfortunately the extension digit cannot be configured just like that in AII as well as AII ITSMobile. How do I go about this?
Thanks and best regards,
Chin Hun

Although unanswered, I'd like to add on to above question. I was unsuccessful in identifying any standard capabilities in AII to commission SSCC numbers with a predefined extension digit. E.g. a process for commissioning case SSCC's starting with extension digit '6' or pallet SSCC's with extension digit '8'.
Ideally, we would be able to have separate number ranges assigned to the different extension digits / company prefixes. But, the central number range administration doesn't allow to predefine specific ranges against different extension digits.
Also, within the commissioning process, there doesn't seem to be an option to predefine the extension digit to be used.
Does anyone have experience to accommodate this in a standard way? Appreciate your input,
regards,
Patrick

Similar Messages

SSCC Generation

Hello All,
I am implementing HUM with SSCC generation during shipping.
I am maintaining the following settings:
SU number range : 00000000400000000000 - 00000000999999999999 (12 Digits)
HU Number Range : 00000000400000000000 - 00000000999999999999 (12 Digits)
Here when I look at the status of Number range SU number is still at Zero where has HU number range is moving along. I believe since HU management is active the HU's are being generated and stored as SU's in the warehouse, so the HU number range is used utilized.
Now I have also done the Config for SSCC generation and the Object I created has 9 numerics
000700000-000799999 since I have 16 Characters to work with i.e. 7 for ILN number and 9 for Serial number to form a SSCC leaving out the Extension digit i.e. pallet, carton and the Check digit(Which is calcuated using an Algorithm).
The question I have is once I convert the HU's into SSCC's during the final step of my of Delivery before PGI. The SSCC are being generated and Printed, but when I look up the SU's the SU is being saved with the last 12 digits(This has the config set in Conversion of storage unit numbers, I set the length of SU as 12, this was something done in the past). But when I click on it it says no SU does not exist.
Is this because my SU number is 12 characters and mu SSCC number is 18 Characters. the only problem I have is returns, how do I take the SSCC back into inventory that was retuned.
What if I had my SU number to be 18 or 20 Charactes. Would I get this error then? ?
Thanks in advance...

Hi,
if the storage location is full-WM and HU-managed, the storage unit management is always active and HU numbers are taken over as SU numbers. In all other cases HUM and SUM are independent from each other and number ranges must be set a way that they are not overlapping.
Do you use a handling unit managed storage location? (You can check this in table T001L, when xhupf is X, the sloc is handling unit managed).
Regards,
Ely
Edited by: Eleonora Juhasz on Aug 30, 2010 1:44 PM

Help! DreamWeaver MX 2004 reactivation doesn't work!

Following having to reinstall my complete system from a backup, due to a deep seated virus I just couldn't get rid of, my DreamWeaver MX 2004 now requests reactivation.
I tried the online reactivation, but this no longer exists, and the phone activation doesn't work either!
It was working just fine when I made the backup, and was working fine before I had to reinstall.
I have tried Adobe chat, but they tell me it's too old and they don't have the info now.
Well, MX 2004 suited me just fine right now, and my serial number is a non-expiring one, so why can't I use it? At the moment, I just can't afford a new version.
All I need is the confirmation number normally given out on the phone to make it work...
Any ideas please?

Hi,
Thanks to both of you for taking the time to reply.
After some more extensive digging I found the solution, which I'm putting here for others if they are in the same situation.
Adobe has a page giving new serial numbers following the discontinuation of the activation server.
Go here for the new serial #'s for the whole MX 2004 series:
http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html

Configuring call handlers in CCM-Business Edition v8

Hi team
would u help me pls
I need to config the operator with call handler options, but i unknow what is the step by step for this config, is necessary create the CTI route point?
how active the extension for that all calls ingoing arrive to operator extension...
the IVR will be easy
Wellcome to enterprise XXXX
digit 1 for english
digit 2 if you know the extension
digit 0 for the operator...
thks a lot for u help
Edgar ...

You can just use the same DN for the call handler and the CTI RP and avoid routing rules. (depends on call flow)
Just record your greeting with the options you mention, create as many call handlers as options you need and then use the caller input config to send the calls to each option as needed.
For #2 you can send them to a call system transfer or a regular call handler. Depends if you expect them to dial only VM users or not.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Get CD Track Names not working in itunes 10 for mac

Hi there, been having an annoying problem where iTunes wouldn't grab CD track names that I was trying to import.
I couldn't find a real answer for how fix this, then found this after extensive digging so I thought I'd repost this thread just incase no one else has:
https://discussions.apple.com/message/12339739#12339739
Kay Marczoch's answer totally worked:
"Try deleting "CD Info.cidb" from yourusername/library/preferences That file is used to store CDDB infos - it might be corrupted Then reboot".
I didn't even have to reboot and it worked.
thanks Kay!

My friend inputted his CD info to Gracenotes. It accepted his input. However, I myself can't get this info for his CD. It says in the "help" section of iTunes that it doesn't work for "custom" CDs, you can only use it for commercial CDs. I don't see then the point of submitting track names. If it's an original or even copied commercial CD, I can dupe his CD on my computer and get the tracks info without him having to submit it.

ITunes Freezes when connecting iPhone (AppleMobileDeviceHelper/SyncServer to blame?)

I'm having several issues with iTunes and connecting my phone. iTunes becomes unresponive for about 30 mins when either connecting my iPhone (via cable or seeing it over WiFi when WiFi-sync is enabled), pressing sync, or sometimes other tasks which relate to the device. While frozen, iTunes continues playing the current track until the end, then it won't start the next one until it becomes responsive again.
I think I've tracked down the error; I noticed that iTunes has a child process called "AppleMobileDeviceHelper", terminating this causes iTunes to resume (although it won't sync the device anymore until it restarts). Upon further investigation, I looked at which files AppleMobileDeviceHelper was using, and found the "syncservices.log" log in ~/Library/Logs/Sync/. Looking at the log, it was clear something wrong was going on since the following lines were being added to it every few seconds:
2012-01-25 22:51:21:640|SyncServer|40031|0x10b016e50|Logging|Info| Logging initialized, engine version 673.3 : log level 3
2012-01-25 22:51:21:645|SyncServer|40031|0x10b016e50|SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 786713006080 bytes free in Robert.
2012-01-25 22:51:22:339|AppleMobileDeviceHelper|36432|0x35de40|Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
2012-01-25 22:51:22:876|AppleMobileDeviceHelper|36662|0x388730|Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
I couldn't find a process called "SyncServer", I'm guessing it failed to start due to being unable to start SQLite, which is why ApplyMobileDeviceHelper is presumably unable to connect to it, just after. The SQLite error complains of apparently not having enough space, although as you can see I have over 780GB free, and there's plenty of free space on my iPhone, too.
Does anyone have any idea why these errors might be happening? I've seen people report similar issues (and that iTunes normally resolves itself after a while), although it's not fixed it for me (as I have to do that everytime), and I've found nothing searching for the errors in that log.
Late 2008 15" MacBook Pro 2.8 Ghz, 10.7.2, iTunes 10.5.3, iPhone 4 running 5.0.1
Any help would be appreciated, thanks!

After some extensive digging around, I've been able to fix this problem by trashing the "SyncServices" folder in ~/Library/Application Support.
I tried running SyncDiagnostics.app, which I found in the same directory as SyncServer.app (which I found through spotlight). That froze, so I killed it, and then I found a support document pointing me to a perl script to run (on step 10). That also failed, but it revealed the SyncServices folder and its location, so after closing applications which appeared to be failing because of SyncServer (the perl script, SyncDiagnostics.app, Mail, iTunes), I trashed the folder and restarted. And then it all worked!

7960 local 4-digit extension

Hello all,
I am running a VoIP lab and have cisco 7960g configured and working well making outbound and inbound calls plus v-mail, except that I need to configure a 4-digit dialplan in the dialplan.xml file to be able to call other extensions. The current dialplan looks as follows:
<DIALTEMPLATE>
<TEMPLATE MATCH="#..." Timeout="5" User="Phone" />
<TEMPLATE MATCH="#..." Timeout="5" User="Phone" />
<TEMPLATE MATCH="0" Timeout="1" User="Phone"/> 
<TEMPLATE MATCH="9,011*" Timeout="6" User="Phone"/> 
<TEMPLATE MATCH="9,0" Timeout="2" User="Phone"/> 
<TEMPLATE MATCH="9,11" Timeout="0" User="Phone" Rewrite="9911"/> 
<TEMPLATE MATCH="w!" Timeout="1" User="PHONE" Rewrite="9911"/> 
<TEMPLATE MATCH="9,.11" Timeout="0" User="Phone"/> 
<TEMPLATE MATCH="9,101..............." Timeout="0" User="Phone"/> 
<TEMPLATE MATCH="9,10.............." Timeout="0" User="Phone"/> 
<TEMPLATE MATCH="9,10*" Timeout="6" User="Phone"/> 
<TEMPLATE MATCH="9,1.........." Timeout="0" User="Phone"/> 
<TEMPLATE MATCH="9,......." Timeout="0" User="Phone"/> 
<TEMPLATE MATCH="*" Timeout="5"/> 
</DIALTEMPLATE>

The Cisco IOS command dialplan-pattern contains a new keyword, extension-pattern, to allow additional manipulation of IP-phone abbreviated extension number prefix digits. When this keyword and its arguments are used, the leading digits of an extension pattern are stripped and replaced by the corresponding leading digits of the dial-plan pattern. This command can be used to avoid direct inward dial (DID) numbers like 408-555-0001 resulting in four-digit extensions such as 0001.

Route 10 digit dialed numbers to 4 digit VoIP extensions

If a branch office phone dials a 10 digit TN of a VoIP phone, instead of simply dialing the internal extension, is there any way to route that call over the WAN instead of sending the call off to the PSTN? We have 30+ locations for which we'd like to apply this concept to.
We are using a mixture of PSTN's and SIP trunks, MGCP gateways, and CUCM 7.1
Thanks,

Absolutely although the answer will differ depending on the intracies of your particular dial plan design. Here are two common approaches:
(Adapt) Create translation patterns for your DID ranges within the same partition that the off-net route patterns exist. The more-specific translation pattern will be matched, preventing the call from going off-net. In your example as you've described it:
Route Pattern: [2-9]XX[2-9]XXXXXX or 9.[2-9]XX[2-9]XXXXXX
Translation Pattern:
FROM: 608[2-9]XX.XXXX or 9.608[2-9]XX.XXXX (Take note of the period and the fact that the pattern is more explicit than your route pattern!)
TO: Digit Discard: PreDot; Use a CSS that has the internal DNs.
(Start Over) This, along with a long list of other dial plan shortcomings has been designed in the E.164-based dial plan introduced with CUCM 7.0; however, this essentially requires you to start over. There is no easy way to convert from the legacy model. The E.164 "act local, think global" mentality would inherently catch this.
Full disclosure: I am a big proponent of the E.164-based design and am unlikely to be entirely impartial here.

Printing Barcode for a 18 digit SSCC No (Handling Unit Number) thru' VL02N

Hi,
I'm trying to print a Barcode for a corresponding Handling Unit number in VL02N transaction code.
I have created a new device type by name ZBARCODE in SPAD transaction, the Device Type name is:
ZLB_ZEB and Spool Server is: fihdev02_FDV_00
In SE73, have created a new System Bar Code by name ZZEAN128 with the following parameters
00 00 10.00 CM 2.00 CM C128 000 .
In the Printer Bar Code option, ZBARCODE device type has been selected and in the Display Print Control page ZZEAN128 Bar Code, Prefix and Suffix has been assigned to the ZBARCODE Device Type.
In the copy of the LE_EAN128_SSCC00 Form I have assigned the ZZEAN128 Bar Code as a Character Format.
But, it is not printing the Barcode in the ZEBRA 110XI Printer.
How to overcome this problem.
Kindly guide me to fix it.
Thanks in advance,
-- Jessica

I have solved it myself.

Facelets and jsf-extensions problem.

I'm fairly certain I've run into a problem between facelets and jsf-extensions. I'm working with JSF 1.2 RI, Woodstock, Facelets 1.1.13, on Tomcat 6.
When trying to get Woodstock autoValidation to work I get a javascript error the "I has no properties". The error occurs in the com_sun_faces_ajax.js file in the jsf-extensions-dynamic-faces-0.1.jar (I've used both the RC4 and a build today ,10/18/07 from source with the same results). Here is the code snippet where it happens (with my comment).
var I = G.getElementsByTagName("components")[0];
var C = I.getElementsByTagName("render");
for(var F = 0; F < C.length; F++) {
In the second line there it looks like the variable I is null, but based on the post response below I don't know why.
The response from the post looks like this:
<partial-response><components><render id="PayableForm:vendorGci"><markup><![CDATA[{"valid":true,"id":"PayableForm:vendorGci"}]]></markup></render></components>
However the server side code (validation method) never gets executed. I'm willing to do some digging and debug work, but I'd need to be pointed in the right direction.
The following is more potentially useful code snippets.
Here is the textField code:
<w:form id="PayableForm">
<w:textField style="display:none;" />
<w:message for="vendorGci" />
<w:label id="vendorGciLabel" for="vendorGci" text="Vendor: " />
<w:textField id="vendorGci" autoValidate="true"
text="${vendorBean.searchGci}" maxlength="8" required="true"
validatorExpression="#{ vendorBean.validateVendor}" />
Here is the javascript in the page (the init function is called from the body: onLoad="setTimeout('init();', 0);" , this does happen):
<w:script type="text/javascript">
function VendorListener(){
function VendorNotify(props){
alert("VendorNotify called!"); <--------------- I never see this alert message
if ( props.id != "PayableForm:vendorGci") { return; }
var field = document.getElementById("PayableForm:vendorGciLabel");
field.setProps({
valid: props.valid
VendorListener.prototype.notify = VendorNotify;
function initAccountRows(){
var table = document.getElementById("PayableForm:vendorAccountTable");
table.initAllRows();
function init(){
initAccountRows();
var listener = new VendorListener();
dojo.subscribe(
webui.suntheme.widget.textField.event.validation.endTopic ,
listener, listener.notify);
Here is the validator method. It currently doesn't do anything, just trying to get something to work. I never see the output, and I never hit the breakpoint in the method.
public void validateVendor(FacesContext context, UIComponent comp, Object value){
System.out.println("**********************************");
System.out.println("validateVendor called");
System.out.println(value);
System.out.println("**********************************");
}

Actually I don't need a global variable. I need to refer in my included template the actual backing bean used in the current page. As all my backing bean extends a abstract class I could bind my component to a property of the current backing bean, no matters which one. Just like a polymorphic call but without the parameter. Let's imagine I could get this object of the facesContext object I would be able to do:
<rich:datascroller renderIfSinglePage="false" align="right" for="listagem" maxPages="12" fastStep="10"
pageIndexVar="pageIndex" pagesVar="pages" stepControls="show" fastControls="hide" boundaryControls="show"
inactiveStyleClass="paginacaoInativa" selectedStyleClass="paginacaoSelecionada"
styleClass="paginacao" tableStyleClass="paginacaoTabela"
binding="#{facesContext.currentBackingbean.formDataScroller}" id="paginacao">
Instead of pass the backing bean to the ui:param of this template... Dou you get the point?

IPhone Jabber client not showing internal extensions just the Alerting Name

I have customer calling from a 7965 to his desk phone 7965 which shows both Alerting Name and Extension, he also has an iPhone/Jabber Client on WiFi (no cellular involved). The iPhone client shows the Alerting Name from the 7965 but doesn’t show the 4 digit internal extension. Is this a known issue?

Dear Miro,
The issue has nothing to do with the server it's the client, Lync 2013 issue with caching data and the way its reading it back from the cache.
Work around:
just create a new client policy using the command new-csclientpolicy with AddressBookAvailability "WebSearch" only.
"New-CsClientPolicy -Identity TestCsPolicy -AddressBookAvailability WebSearchOnly"
assign the policy to your test client, delete cache folder at the client end.
"Grant-CsClientPolicy -Identity MIRO -PolicyNameTestCsPolicy"
"you can delete sign-in information by signing out and clicking on "delete sign-in info" then sing-in again"
test again. it should work.
if it didn't open contact card and check if the the client is getting the data correctly.
yet i didn't find another fix to the issue with lync 2010 client everything works just fine without any changes.
Regards,
Nader Barakat

How do you search through configured Alternate Extensions to correct error message : The phone number or extension has already been assigned to some other object.

When configuring a new Unity Voicemail Account I receive this message : The phone number or extension has already been assigned to some other object. I understand that this means that the 10 digit number I am trying to configure as the alternate extension for this user is already configured for another object with Unity.
I need to search by the 10 digit number and determine where it is configured so I can change it and map to the correct end user.
I have attempted to to search Users via DTMF Access ID using the 10 digit number with nothing being returned via that search.
How do I Search all of the copnfigured Alternate Extensions within our Unity Server?

A subscriber info dump is likely the fastest way. If you're curious regarding other methods, you can also use the Data Link Explorer (CUDLE) tool which is in the Cisco Unity Tools Depot. All extensions for all objects are referenced in the "DTMFAccessId" table. The View menu has a Query Builder which you can use to compile a SQL query that searches for a digit string. It's best to search for both the 10 digit string as well as an abbreviated string as Unity sees them essentially the same and they are usually should be associated with a single subscriber. Once you find a match, you can use the "ParentObjectId" value associated with the DTMF access ID to look for a matching owner in the "GlobalSubscriber" table. The ParentObjectId should match the SubscriberObjectId for a subscriber (assuming the DTMF access ID is assigned to a subscriber). This is the same thing as looking at SQL; however, you are not directly accessing the DB so this is generally considered the safest way to browse and get a feel for where things are.
Hailey

Download ZIP file without changing file extension

I regularly download a zipped csv file, of the format: "filename.csv.gz". As the name does not change, Firefox adds a digit to distinguish it, so for example I get "filename.csv-3.gz". This is a pain as it changes the file extension which means that I cannot open the extracted file without first renaming it. I want to keep an archive of all the files, so deleting them each time isn't really an option, and neither is moving them to a different location each time. Is there any way the naming convention for downloads can be changed?

I think you have to disable it in your Operating system:
8dot3NameCreation
[http://support.microsoft.com/kb/121007]

How to Package Photoshop Extension for cs4/cs5 with manifest.xml

Hello,
tl;dr: How can I package my extension for both cs4 and cs5 in a way that respects the extension's window geometry?
I have a panel that specifies window geometry in it's manifest.xml. When the panel is installed into Photoshop's panels/ folder, the geometry gets ignored, so I'm trying to package the panel as an extension to be installed via the Extension Manager. I have run into different problems for each CS version. I've read quite a few pdfs about the Extension Manager, UCF command line packaging, etc, and have not been able to find a solution that works for both platforms.
My understaning
My trial and error research has lead me to understand that the extension's files must eventually end up in the (mac) /Library/Application Support/Adobe/<CSversion>ServiceManager/extensions/ directory. In CS5, if the extension's folder contains a manifest.xml file (ex: /extensions/GuideGuide/CSXS/manifest.xml) that specifies window geometry, Photoshop will respect that window geometry when the panel opens. However, in CS4, this is not enough. From my tests, Photoshop CS4 doesn't seem to do anything with the manifest.xml file. Instead, I had to modify /Library/Application Support/Adobe/CS4ServiceManager/ServiceManifest.xml and add my extension to it's contents. Once I did this, Photoshop CS4 launches my panel and respects it's window geometry.
The problem with this is that it's a manual installation. I can't ask my users to dig around in their system files to install my panel. In addition, since it's unsigned using this method, it won't work if they're not flagged for debugging. I've started exploring using the Extension Manager, but I have run into problems that I cannot find ansers in the few pdfs about packaging that I've been able to find.
CS5 Problems
If I use the UCF command line tool, I can package and sign my file. It installs fine and does what I want. However, using this method, I haven't been able to find a way to specify the author and description that shows up in the Extension Manager.
CS4 Problems
The UCF command line tool doesn't appear to make packages that can be installed by CS4, and I haven't been able to find one that is compatable. I've had to result to using the Extension Manager to package my extension based on a .mxi file. The problem I have here is that installing files this way limits me to putting them in the /panels directory, which then causes the panel to ignore the indow geometry. Is there a way with an .mxi file to install in the /Library/Application Support/Adobe/<CSversion>ServiceManager/extensions/ directory and modify the /Library/Application Support/Adobe/CS4ServiceManager/ServiceManifest.xml file?
There must be, because Kuler and other extensions are installed there.
Thank you SO much for any help you might provide. I've spent weeks trying to get this to work and have run into nothing but dead ends and wild goose chases.

Your extension is a CSXS extension. For CSXS extension it's introduced in Extension Manager 2.1. (You can download Extension manager 2.1 from http://www.adobe.com/exchange/em_download/em20_download.html)
In Extension Manager CS2.1 only MXP package is supported. In Extension Manager CS5 CSXS extension must be packaged by ZXP format. So you have to generate two packages for CS4(mxp) and CS5(zxp)
For CS5, you can use ucf.jar to generate the zxp package.
For CS4, you have to create an MXI file and package it by Extension Manager 2.1 to mxp package. Here is a sample CSXS mxi file:
<macromedia-extension
           name="CSXS_TEST_EXTENSION"
           version="1.0.0"
           type="Command"
           requires-restart="true">
          <author name="Macromedia" />
          <products>
                    <product name="Dreamweaver" version="10" primary="true" />
                    <product name="Fireworks" version="10" primary="true" />
                    <product name="Flash" version="10" primary="true" />
                    <product name="" version="11" familyname="Photoshop" primary="true" />
                    <product name="Illustrator" version="14" primary="true" />
                    <product name="CSXS" version="1" />
          </products>
          <description>
          <![CDATA[
          CSXS extension sample.
          ]]>
          </description>
          <ui-access>
          <![CDATA[
          Extension Name: kuler
          ]]>
          </ui-access>
          <license-agreement>
          <![CDATA[
          ]]>
          </license-agreement>
          <files>
                    <file source="test_extension" destination="" />
          </files>
</macromedia-extension>

How do I add an extension to a phone number in Contacts 7.1?

Now that the perfectly servicable Address Book has been replaced by overly complicated Contacts 7.1 in OS 10.8.3, I cannot add an extention to a telephone number. A phone number with an extention ends up looking like "4155551234ext3710484". Creating a new field named "ext" doesn't help, as any number entered into this field that is longer than 3 digits is autoformated to a phone number. Some of my contacts now have 6 digit extensions!
Contacts Help is no help whatsoever. Very frustrating.

From what I read, using a comma to separate the main number from the extension should work. It inserts a pause, with each additional comma increasing the length of the pause. So:
4155551234,,3710484
might be long enough for the automated system to pick up and reach the point where it'll accept the extension number. If not, add more commas.
Commas will also sync to your iPhone if you have one, and work as intended.

SSCC Extension Digit

Similar Messages

Maybe you are looking for