Ssd and hd disk

de laptop heeft de mogeljkheid voor 2 schijven, hiervoor is ook de aanduiding weergegeven als 1 en 2, echter er kan maar 1 ssd als sata aangesloten worden,  wat is de aansluitmogeljkheid voor de 2e schijf? Ik zie wel dat er nog een aansluiting vrij is nabij de dvd-aansluiting, echter deze aansluiting is anders dan van de 1e hd. Is hiervoor  een aparte en langere kabel voor verkrijgbaar? betreft een hp pavilion dv7 notebook pc.
graag een oplossing.
This question was solved.
View Solution.

I have already an answer received
THE. Selution is perfect !
Thank you for all.

Similar Messages

  • What size for OS/apps SSD and scratch disk SSD ?

    Hi !
    I need a SSD for my OS with the full CS6 Cloud and few others apps (but no games, pictures, songs or other personnal stuff),
    that's mean between 70 and 80Gb. So I think I'll need only a 128Gb for that.
    I also need a scratch disk, so despite I prefer a fast and large disk like the Barracuda 3Tb, I read it will be better to take a SSD.
    My workstation is a 6x core, with 64Gb RAM, and 6x HDD for projects, render and footage (4K R3D and 1080p PRORES).
    My questions are :
    1) OS/apps SSD :
    Even if I only need 80Gb (or a few more like 90Gb max) of storage, do I need to take more than 128Gb ?
    Is it possible that the OS fill my disk with lots of temporary files ?
    And the same for Photoshop, Premiere, After Effects or others apps ?
    I know those apps will use the scratch disk, but maybe others temporary files will be write on this OS/apps drive ?
    2) scratch disk SSD :
    Like I said, I prefer larger drives, but as I understood, SSD will be better for preview and temp files,
    and actually I'm working with 4K R3D footages and 1080p PRORES.
    So do you think 128Gb will be enough for a scratch disk, to use with CS6, Blackmagic Resolve, and others 3D apps, like Maya ?
    Of course I can empty them regularly.............. but is it enough ? Or 256Gb, or higher will be better ?
    Or just a fast WD Velociraptor 1Tb or even a cheaper Barracuda 3Tb hard drive will be good enough ?
    Thanks guys.

    Thanks for your fast reply.
    But, I'm confused.... if the OS and the apps can fill my disk with lots of temp files, how a 128Gb can be enough ??
    Maybe you mean that those apps will fill the SSD with "hidden" files, but not reach the limit of 128Gb ?
    About Windows, I didn't knew I could make a scratch disk only for this temp files.
    Do I have to put the Windows temp files in the scratch disk also ?
    And you don't think a Velociraptor with 1Tb will be a good solution between the speed of a SSD and the size of a HDD ?
    My drives (alone or in RAID 0) are directly connected from the motherboard P9X79 PRO, trought the X79 chipset, and the Marvell chipset.
    But I read that the Marvell chipset has only 500Mb/s in total bandwitch divided between the 2 drives..... I'm not really sure....
    but even if it's true, I don't think the OS/apps will take a lot of bandwitch (except when I'll start an apps),
    and it will surelly let the full bandwitch for the scratch disk. Don't you think ?
    4 drives are connected to the X79 chipset :
    - 1x SATA 6Gb/s - Barracuda 3Tb (projects)
    - 1x SATA 6Gb/s - Barracuda 3Tb (renders)
    - 2x SATA 3Gb/s / RAID 0 - Barracuda 3Tb (footages)
    - 2x SATA 3Gb/s / RAID 0 - Barracuda 3Tb (footages)
    2 drives will be connected to the Marvell chipset :
    - 1x SATA 6Gb/s - SSD (OS/apps)
    - 1x SATA 6Gb/s - SSD or HDD (scratch disk for CS6 and other "video" apps)

  • SSD and Traditional Disk on Early 2011

    Hi,
    I am planning to replace by Disc Drive with SSD Drive.
    So at the end would have 1 SSD and 1traditional drive.
    My question:
    - How to replace Disc Drive with SSD?
    - What kind of SSD do I need to buy. I read there is SSD with bracket. Do I need SSD with bracket?
    - Can I buy any brand of SSD? Would it be any compatibility issue?
    Thanks,
    Sandy

    There shouldnt be any problems, and if you dont use the CD drive you can actually replace it with an SSD. Here is a link to a youtube video of someone doing it. All you have to do is buy the kit in the video and the SSD metioned. The first link is just a normal upgrade, but the second one is the CD replacement.
    http://www.youtube.com/watch?v=y_vk2wKwmzg&list=WLDyES3aVn1bBlvA2csfENZB7g8nPny- Sx
    http://www.youtube.com/watch?v=ds_6IET3siE&list=WLDyES3aVn1bBlvA2csfENZB7g8nPny- Sx

  • Can hard disk be replaced with larger capacity of SSD or SATA disk?

    Weighing on buying a Twist, can I replace the hard disk with larger capacity SSD or SATA disk? Is there any capacity limit on SATA disk? Are SSD and SATA disks compatible for Twist (say replace SSD disk with SATA disk or vice versa?
    Many thanks.

    the Twist's hdd is a 2.5 inch 7 mm drive, which you can upgrade to any other SATA disk of this size either platter or SSD.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • I have formatted my SSD and hard drive.... I am running a clean install from disk of 8.1 pro. I cannot determine if it is a compatibility

    issue or hardware issue. I had run a memory test and scan disk for bad sectors from the bios. As administrator, I enabled automount  in diskpart to allow windows to assign a drive name. 
    From the bios, I can see both drives and only the ssd. I have not pinpointed when the harddisk is unmounted. It is formatted as NTFS. I can hear it unmount either during boot or upon waking from sleep mode. The bios sees no bad sectors nor does windows.
    However, when I had the intel compatibility software installed, my hard drive never mounted. I did a restart and inorder for windows to see my hard drive. I disabled the intel software for the 4th gen i7 processor. This problem is happening less often. I do
    not think I have solved the problem. Intel or Windows... I think a bit of both. 
    If there is a software patch, please guide me to it. I am in school and use my laptop ALL the time. I believe it is a compatibility issue. I have attached this from searching intel's site for downloads and windows is up to date. 
    I am quite concerned because I can hear my harddrive unmount. It is labeled as healthy NTFS partition. I have checked for hidden volumes and done everything I know to do to check the integrity of the hardware as administrator. I have searched microsofts
    libraries and forums and have done everything I can find as suggestions. 
    I have checked for malware, viruses, etc. My only clue this is going to happen is the hard disk spins up and I hear the fan, then I hear it unmount the drive. Of course, after unmounted there are other issues which I have ruled out as the cause of the problem.
    Basically, I am experiencing a lack of swap space after my hard drive unmounts.
    Any suggestions, are welcome! I would really like to know if this is a known windows issue. I should not have to disable intel's processor software. I paid for the features of the i7 and would like to utilise the processor.

    Hi,
    According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
    Roger Lu
    TechNet Community Support

  • When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported.  Is this a bug in Mavericks?

    When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported. 
    This happens not just with the SSD in my Mac Mini, but with another SSD in my MacBook (both now running Mavericks).  So far as I know, all of the kit I am using is in good order (despite the file corruption reports).  So I am beginning to wonder if it could be due to a bug in Mavericks?  Both SSD drives have been formatted to MacOS Extended (journaled) format.  Should I have used a different format, I wonder?
    Has anyone else encountered this issue?
    Does anyone have a solution?
    Or an explanation that might help my investigation of the issue?
    Thanks guys,

    I understand that the Corsair Force 3 is not one of the SSD drives that are supported on Apple Macs. 
    I did try downloading and using Trim Enabler, but the error message came up both when it was off and when it was on.
    I understand that not everyone thinks Trim Enabler is a good program, though there is a new version out now, so I may give it another try.

  • I am waiting for a new iMac with two drives: SSD   conventional hard drive. How can I transfer only a certain number of applications to the SSD and the rest to the physical hard disk drive?

    I am expecting a new iMac (i7 with SSD). How can I transfer only certain applications along with the system, library etc. to this limited (space) HD and other applications to the conventional disk HD in order to save space on the SSD?
    Thank you,
    Gilles

    Tom Lassiter wrote:
    I have the same scenario, using an SSD for my start-up drive. I have copied my Applications folder to a mechanical hard drive and created symbolic link to it. The symbolic link resides on the SSD and works properly.
    That may not be the best solution.  Many updaters expect apps, especially Apple apps, to be in the  /Applications folder on the OSX drive;  if there are updates, the apps may not be found, thus may not be updated.  I don't know if the installers/updaters will follow a symbolic link or not.
    DItto some apps, especially Adobe apps, won't even work if they're anywhere else.  Again, I don't know if they'll follow a symbolic link, either.

  • Hardware: SSD drives and scratch disks

    Hi,
    I am building a new system for Photoshop. Two quick questions:
    1. I note in Adobe's system reqs it says Photoshop cannot be installed on flash-based storage devices. Does this include SSDs? Is there a genuine problem here (i.e. if my application drive is an SSD the PS won't work)?
    2. I have not previously had a so-called "scratch" disk so I don't really know what it is or whether I need one, or more than one. What's the general advice here? - separate drive to the PS application drive? also separate to the Windows drive? How big? Will an SSD be a good choice for a scratch drive?
    Thanks in advance,
    Alastair

    G'day,
    In answer to your query SSDs work fine to install cs4 on bar the following I'm having.
    I've built a new system using ssds.and is working fine bar one problem
    Specs of the system is
    I7 920 cpu, Asus P6t se mb, 12gb ram, 128gb ssd, 64gb ssd, 4gb raid 1+0 array onboard, nvidia geforcegtx260. I use the 128gb ssd as the os and programs drive. The raid is the data drive. All works brilliantly except when I set the 64gb ssd as the scratch disk the following happens
    "Could not open a scratch file because the file is locked.  Use the 'Properties' command in the Windows Explorer to unlock the file."
    I hit OK and get this error -
    "Could not initialize Photoshop because the file is locked. Use the 'Properties' command in the Windows Explorer to unlock the file."
    Pressing ok then shuts the program and I need to reset cs4 prefernces and then it all works fine. OS is Win7 64 bit.
    Now I have just got to try and fix this problem Anyone got suggestions?
    Cheers
    Onslow
    Hmm, seems to have stopped doing this now after resetting the scratch to the ssd and then rebooting. All is now fine and wonderfully quick.

  • Safe to verify and repair disk permissions with SSD?

    Is it safe to verify and repair disk permissions with an SSD installed?

    Thanks.
    Its just strange, as soon as I repair all my permissions, if I verify them again straight away, there are some that already need re-repairing

  • Comparison of SSD with hard disk drives

    Attribute or characteristic
    Solid-state drive
    Hard disk drive
    Spin-up time
    Instantaneous.
    May take several seconds. With a large number of drives, spin-up may need to be staggered to limit total power drawn.
    Random access time[45]
    About 0.1 ms - many times faster than HDDs because data is accessed directly from the flash memory
    Ranges from 5–10 ms due to the need to move the heads and wait for the data to rotate under the read/write head
    Read latency time[46]
    Generally low because the data can be read directly from any location; In applications where hard disk seeks are the limiting factor, this results in faster boot and application launch times (see Amdahl's law).[47]
    Generally high since the mechanical components require additional time to get aligned
    Consistent read performance[48]
    Read performance does not change based on where data is stored on an SSD
    If data is written in a fragmented way, reading back the data will have varying response times
    Defragmentation
    SSDs do not benefit from defragmentation because there is little benefit to reading data sequentially and any defragmentation process adds additional writes on the NAND flash that already have a limited cycle life.[49][50]
    HDDs may require defragmentation after continued operations or erasing and writing data, especially involving large files or where the disk space becomes low. [51]
    Acoustic levels
    SSDs have no moving parts and make no sound
    HDDs have moving parts (heads, spindle motor) and have varying levels of sound depending upon model
    Mechanical reliability
    A lack of moving parts virtually eliminates mechanical breakdowns
    HDDs have many moving parts that are all subject to failure over time
    Susceptibility toenvironmental factors[47][52][53]
    No flying heads or rotating platters to fail as a result of shock, altitude, or vibration
    The flying heads and rotating platters are generally susceptible to shock, altitude, and vibration
    Magneticsusceptibility[citation needed]
    No impact on flash memory
    Magnets or magnetic surges can alter data on the media
    Weight and size[52]
    The weight of flash memory and the circuit board material are very light compared to HDDs
    Higher performing HDDs require heavier components than laptop HDDs that are light, but not as light as SSDs
    Parallel operation[citation needed]
    Some flash controllers can have multiple flash chips reading and writing different data simultaneously
    HDDs have multiple heads (one per platter) but they are connected, and share one positioning motor.
    Write longevity
    Solid state drives that use flash memory have a limited number of writes over the life of the drive.[54][55][56][57] SSDs based on DRAM do not have a limited number of writes.
    Magnetic media do not have a limited number of writes.
    Software encryption limitations
    NAND flash memory cannot be overwritten, but has to be rewritten to previously erased blocks. If a software encryption program encrypts data already on the SSD, the overwritten data is still unsecured, unencrypted, and accessible (drive-based hardware encryption does not have this problem). Also data cannot be securely erased by overwriting the original file without special "Secure Erase" procedures built into the drive.[58]
    HDDs can overwrite data directly on the drive in any particular sector.
    Cost
    As of October 2010, NAND flash SSDs cost about (US)$1.40–2.00 per GB
    As of October 2010, HDDs cost about (US)$0.10/GB for 3.5 in and $0.20/GB for 2.5 in drives
    Storage capacity
    As of October 2010, SSDs come in different sizes up to 2TB but are typically 512GB or less[59]
    As of October 2010, HDDs are typically 2-3TB or less
    Read/write performance symmetry
    Less expensive SSDs typically have write speeds significantly lower than their read speeds. Higher performing SSDs and those from particular manufacturers have a balanced read and write speed.[citation needed]
    HDDs generally have symmetrical read and write speeds
    Free block availability andTRIM
    SSD write performance is significantly impacted by the availability of free, programmable blocks. Previously written data blocks that are no longer in use can be reclaimed by TRIM; however, even with TRIM, fewer free, programmable blocks translates into reduced performance.[25][60][61]
    HDDs are not affected by free blocks or the operation (or lack) of the TRIM command
    Power consumption
    High performance flash-based SSDs generally require 1/2 to 1/3 the power of HDDs; High performance DRAM SSDs generally require as much power as HDDs and consume power when the rest of the system is shut down.[62][63]
    High performance HDDs generally require between 12-18 watts; drives designed for notebook computers are typically 2 watts.

    I wish I could get my head round the SSD vs HDD with a NLE rig.  My builder is trying to persuade me to use a Toshiba 256Gb THNSNC256GBSJ for OS and programs, and it is only NZ$20 more expensive than the 450Gb 10k rpm VelociRaptor I was originally planing to use for the OS.  That sounds suspiciously cheap to me, and I am concerned about the finite writes to SSD - mainly because I don't really understand it.  
    The rest of the new build is
    3930K
    Gigabyte X79-UD5
    8 x DDR3 1600
    Coolermaster with 750W PSU
    Geforce GTX570
    I plan to transfer the drives from my current system as a starting point, and reassess after giving it some use.  That means
    Either the above SSD or 450Gb 10k Raptor for OS (new drives)
    300Gb 10k rpm Raptor  (currently used for OS in old box)
    150Gb 7k4 rpm Raptor (reserved for Photoshop Scratch in old box)
    2 x 1Tb WD Blacks (data drives)
    2 x 1Tb WD USB3 externals
    I don't know how I would configure the drives in the new box, but have seen Harm's table and will try to follow his advice.  It's a dreadful thing to admit, but I don't have a backup strategy, and the above drives are well over half full. Well over!  And I am only just getting serious about video, (the rest is mainly CR2 files from my Canon 1Ds3 and 1D4)
    I know it must be like banging your head against the wall, but should I avoid that SSD and go with the 450G Raptor?   I have read a comment that the WD Blacks don't work well as Raid0.  Is that BS or true?
    I am about to give the go-ahead so need to confirm the spec.

  • Can i clone my macbook air HDD into an SSD and then install that on a macbook pro??

    i Have a macbook air 2013 with mavericks and my brother has a 2012 macbook pro with yosemite, i want to keep mavericks, can i clone my air's HDD into an SSD and install that SSD into the pro??

    Yes, although your MBA does not have an HDD. It has an SSD. Just put the new SSD into a dock or enclosure, clone your drive to it, then install the new SSD into the MBP.
    Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Destination means the external SSD. Source means the internal startup drive.

  • Help! Installed SSD and now no itunes or iphoto

    Hi all,
    I've succesfully replaced my optical drive with a new SSD, leaving my old HD in place. Things were going well until I discovered that I can't connect iTunes to my old media folder and iPhoto crashes.
    What I would like to do:
    - Use the SSD as boot disk and to run all applications
    - Use the old HD (still installed) as a storage disk for files, music, media, etc
    What I did:
    - Installed Lion on new SSD
    - During the install, used migration assistant to bring over the applications and system settings from my old user account to the SSD
    - Left the other files on the HD
    What happened
    - Things went fine. I opened up Lion off the new SSD and saw my familiar old desktop (now booting up at lightning speed) and both drives available through finder. Opened up Word, saw all my recent documents just as I'd left them.
    - Then, I opened iTunes and found no files. I redirected itunes to my old HD's media folder, but nothing shows up in iTunes even after the redirect.
    - Then, I opened iPhoto and was prompted to choose which folder off my old HD should be used. I chose one and it crashed. Not iPhoto gives me an error message that says, "Your photo library is damaged or unreadable. Please restore from backup." I haven't had a chance to back anything up yet, as I am just in the process of all of this.
    What I tried:
    - Restoring permissions and rebooting
    - Redirecting my admin account to the old HD through Account - Admin Acct (right click) - Advanced Options - Choose Home Directory
              - when rebooting, this brought me to a "brand new desktop" that no longer had any of my old stuff on it
    - Creating a new user account with admin priveleges and choosing the user acct off the HD as per above (same result), with the added feature of having "system preferences" no longer able to open at all and a note from iPhoto that says I don't have sufficient permissions.
    Any ideas???
    Thank you!!
    Austin

    You probably have a permissions problem. You probably created a new account and are trying to get access to folder(s) that belong to your old account.
    To access your files, your account and the files must have the same permissions. This article has a brief tutorial.
    Troubleshooting permissions issues in Mac OS X
    When you have that under control, iTunes is a special case that will need a little more work:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    Above all, don't panic, your files are fine. When you get the permissions straightened out (it will take more steps than just Repair Permissions) everything will be fine.

  • How do you run to Drives on the same screen. I installed a ssd and a hhd to my mac but i can only view the content of the drive only if i boot of that drive. Im try to have my ssd for fast boots and hhd for my music,movies etc. Please help.

    I installed a samsung 840 pro SSD to my primary slot and relocated my 1.5 TB HDD to a data double where my optical drive was. I transfered my apps and Mac OS X to my SSD for fast boots and all my itunes movies, music, Iphoto etc to my HDD. I rebooted off my SSD then seen all the data on my HHD itunes movies, music, iphotos etc i cannot view on my SSD. So my question is how do you view all the content on both the ssd and hdd on the same screen with having to boot off one or the other?

    No, what I'm saying is that once you boot into OSX, you should be able to see both drives listed.  If you don't then either OSX is hiding the other drive because it sees it as a boot drive and is trying to protect the contents from novice users or there's another problem.  If it's the first thing (i.e. it's a protection thing), then your only option would be to boot into the old drive, copy off all your personal data to an external backup drive, then reboot into the SSD and go into Disk Utilities and wipe/reformat the second drive so that you can see it as a regular secondary drive.  Then when you see it as that, you can copy your data back to it.
    Be carefull poking around in Disk Utility as you can easily lose your data.  It's possible the Mac just isn't mounting that second drive because it sees it as another boot drive.  Whatever you do, don't accidentally erase it without getting a copy of your data off of it because you obviously don't have that on your SSD now.

  • How do I merge two seperate HD's into one.  I upgraded my MBP to an SSD and installed a hybrid in the optical bay.

    I intially planned to use my cloned system on the SSD and the Hybrid to be used as backup, media, whatever else.  But I only had access to certain program on another MBP and so I cloned it to a partition on the Hybrid.  So basically I have two seperate computers each isolated from one another.  I have two startup disks, 2 seperate everything.  And I have to be careful when syncing my dropbox and a myriad of issues when swithing from one to the other.  So does anyone have any questions about this or any suggestions as to how I can merge the 2 so that I can run the initial configuration I desired.  Oh and the performance between the Momentus XT hybrid and the Intel-520 ssd are getting closer and closer as time goes by that I almost don't notice a difference, grnted my MBP is only backward compatible to 3gbs so I don't get the performance of the 6gbps capabilities of the intel.  But GD its awesome. 
    I really would appreciate any suggestions.  the machine is 15" MBP mid 2010 with 10.8.2.

    I don't know that copying them from an external would be any different than doing it internally because they are physically seperated.  I have tried many different configurations.  It won't let me erase or format the SSD so that I can clone the Hybrid to it. Which is what I prefer to do but I haven't boot from the recovery or an external and tried doing it that way.  But even then I have to boot from each seperately, what is holding me up is I've lost both product keys to office and adobe ms 6 due to the fact of not only having them so long and always upgrade using dmg's as well as upgrading os's so often.  So those programs are only available on one computer. Which happens to be on a seperate internal disk.  A slick unix script would be nice.  I am just really tired of trial and error and would like to get back to using my stuff.

  • I have one 120GB SSD and one 1TB SSHD, how do do I make one of them my boot drive and the other my data drive?

    I'm currently upgrading my mid-2010 Macbook Pro 13", I've purchased some new RAM and also a 120GB SSD and a 1TB SSHD (Hybrid SSD and HD) with the intention of using an OWC data doubler to get rid of my dvd drive and place the SSD drive there instead. So after I've placed everything into the Mac, how do I make the SSD my boot drive with the OS on it and everything, and the SSHD where all my data (music, photos etc) are stored?

    Youll need to CLONE your internal HD to your target (temporarily) external drive.
    1. grab carbon copy cloner or (my fave) superDuper CLONE app.
    2. attach target clone drive via USB in an enclosure or HD dock. Firstly format the target (external new) HD in disk utility in “Mac OS extended journaled”
    3. clone internal HD to target HD (external)   [takes about 40 mins depending on size]
    4. Boot ONCE from external (go to sys. preference to boot from external) to TEST the new Clone
    5. open bottom (see videos on ifixit or youtube on same) and remove old, install new.
    http://www.ifixit.com/Guide/Replacing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Hard+ Drive/10378/1
    Done
    (FIRST TIME after installing,  boot will be SLOW,...normal and ignore that).
    Clone APPS
    Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    (Free superduper APP above)
    CCC App
    http://www.bombich.com/

Maybe you are looking for