SSD as OSX boot/Windows boot

First off, let me say that I have searched, but still not getting exactly what I need. So here's the scoop;
1) Currently have late '08 MBP 5,1 with 124GB used on 320 HD
2) New '10 MP with single 3.2 GHZ
I'd like to purchase two 60GB Mercury SSD from OWC with sled converters and of course 1GB HD that comes with the MP
1) One for booting OSX and applications
2) One for booting Windows 7 Home
Is it possible to install Windows 7 on a 2nd SSD and boot from it? would I use Boot Camp for that?
Would someone kindly link me to a thread that discusses in detail, moving my files from the MBP to the MP?
Which files/folders do I put on the SSD for OSX?
Which files/folders do I put on the HD that came with the machine?
With the new format for the forum, I'm having a difficult time gleaning what I need using the search function.
Any other tips/ideas for this conversion would be gladly accepted.
Thanks in advance for the help
Paul

Boot Camp
Apple Boot Camp Support
60GB will be small for Windows 7. That will take about 40GB and you want to leave 10GB for updates, 10% for provisioning.
Yes, you can just boot from Windows 7 DVD and pull all the drives other than the one Windows will go to. No big trick there.
Migrate or Setup from your MBP, but I would clone the drive to a FW case is all, maybe even then pull the drive and install it internally - or use Target Disk Mode.

Similar Messages

HT4818 Cannot boot Windows Boot Camp

I installed Windows 7 (Home Premium, 64 bits, service pack 2) on my 2011 iMac. Installation went just fine, i started up windows, installed the BootCamp drivers, restarted etc. and everything worked fine. But when i selected OSX as default OS to startup (in Windows) and rebooted, i'm only able to startup in OSX. I tried rebooting and shutting down and starting up again but holding the Option key just won't give me any menu or something where i can choose to boot Windows, it just brings me to the login screen of OSX.
Also, i can't select my windows partition in System Prefrences because it isn't even there (though its visible in finder).
I'm running OSX 10.8 Mountain Lion.
BTW, i've got this program called "NTFS-3G" installed (which enables write support on NTFS file systems for Mac). Could that have anything to do with System Prefrences not being able to detect the Windows partition?
Hope someone can help.

Ah, solved this one myself,
After uninstalling NTFS-3G and rebooting my Mac, guess what, everything worked just fine.

Arch & Windows 8 Dual Boot -- Windows Boot Loader loads grub-rescue

Arch works fine,but as it always happens Windows boot went down. Both OS are EFI.
Note that boot secure and fast boot were disabled for Windows 8.
I used os-prober, but did not fix anything; so, I removed it. I tried to hack things out using boot-repair from Ubuntu, but it requires a repository, grub-efi, from Ubuntu that Arch doesn't have.
I am trying to modify files in grub.d and grub.cfg and hopefully fix something.
Exact description:
- archgrub loads and shows 3 entries. Two for Arch that load the sys succesfully and one for Windows 8 that fails.
- When I try to execute Windows from grub, it brings me to a grub rescue>
and shows error /boot/grub/x86_64-efi/normal.mod not found
As far as I am concerned this .mod is from Linux, so I don't know why it is being called into Windows loading procedures.
lsblk returns:
[jav@localhost ~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
|-sda1 8:1 0 1000M 0 part
|-sda2 8:2 0 260M 0 part
|-sda3 8:3 0 1000M 0 part
|-sda4 8:4 0 128M 0 part
|-sda5 8:5 0 605.3G 0 part
|-sda6 8:6 0 5.4G 0 part /boot/efi
|-sda7 8:7 0 25G 0 part
|-sda8 8:8 0 20G 0 part
|-sda9 8:9 0 244.1G 0 part /
`-sda10 8:10 0 29.3G 0 part
sr0 11:0 1 1024M 0 rom
Here's the output of fdisk. Another weird thing is that sometimes ubuntu would show on my terminal. See the first line below, "jav@ubuntu"?!
[jav@ubuntu ~]$ sudo fdisk -l
[sudo] password for jav:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: [i deleted this]
Device Start End Size Type
/dev/sda1 2048 2050047 1000M Windows recovery environment
/dev/sda2 2050048 2582527 260M EFI System
/dev/sda3 2582528 4630527 1000M unknown
/dev/sda4 4630528 4892671 128M Microsoft reserved
/dev/sda5 4892672 1274335231 605.3G Microsoft basic data
/dev/sda6 1847777280 1859151871 5.4G EFI System
/dev/sda7 1859151872 1911580671 25G Microsoft basic data
/dev/sda8 1911580672 1953523711 20G Windows recovery environment
/dev/sda9 1335775232 1847777279 244.1G Linux filesystem
/dev/sda10 1274335232 1335775231 29.3G Microsoft basic data
And, bootinfoscript output:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/ubuntu/grubx64.efi
sda3: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/ubuntu/grubx64.efi /bootmgr /boot/bcd
sda4: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda6: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.02 ... :..(:,:0:4:8:....D:H:L:[.T:[.\:`:d:[.l:p:t:x:|:.:.:.:.:.:.:.:.....................
Boot sector info: Syslinux looks at sector 99102 of /dev/sda6 for its
second stage. SYSLINUX is installed in the /syslinux
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /grub/grub.cfg /syslinux/syslinux.cfg
/syslinux/ldlinux.sys
sda7: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda9: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Arch Linux ()
Boot files: /etc/fstab
sda10: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 2,050,047 2,048,000 Windows Recovery Environment (Windows)
/dev/sda2 2,050,048 2,582,527 532,480 EFI System partition
/dev/sda3 2,582,528 4,630,527 2,048,000 -
/dev/sda4 4,630,528 4,892,671 262,144 Microsoft Reserved Partition (Windows)
/dev/sda5 4,892,672 1,274,335,231 1,269,442,560 Data partition (Windows/Linux)
/dev/sda6 1,847,777,280 1,859,151,871 11,374,592 EFI System partition
/dev/sda7 1,859,151,872 1,911,580,671 52,428,800 Data partition (Windows/Linux)
/dev/sda8 1,911,580,672 1,953,523,711 41,943,040 Windows Recovery Environment (Windows)
/dev/sda9 1,335,775,232 1,847,777,279 512,002,048 Data partition (Linux)
/dev/sda10 1,274,335,232 1,335,775,231 61,440,000 Data partition (Windows/Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 CE62D9F062D9DCF1 ntfs WINRE_DRV
/dev/sda10 150a8788-6049-45ed-85af-ded92a2c0801 ext4
/dev/sda2 16DC-8816 vfat SYSTEM_DRV
/dev/sda3 7CDD-0403 vfat LRS_ESP
/dev/sda4
/dev/sda5 40E4E0CFE4E0C7EC ntfs Windows8_OS
/dev/sda6 9C3F-2A9E vfat
/dev/sda7 7240E43740E40427 ntfs LENOVO
/dev/sda8 422CE5EA2CE5D945 ntfs PBR_DRV
/dev/sda9 1a765403-f251-43d8-8edf-c191475d3837 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda6 /boot vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda6 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda9 / ext4 (rw,relatime,data=ordered)
============================= sda6/grub/grub.cfg: ==============================
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 1a765403-f251-43d8-8edf-c191475d3837
else
search --no-floppy --fs-uuid --set=root 1a765403-f251-43d8-8edf-c191475d3837
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
## Attempt at fixing grub
# insmod fat
# set root='hd0,gpt6'
### BEGIN /etc/grub.d/30_os-prober ###
#menuentry 'Windows Boot Manager (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-16DC-8816' {
# insmod part_gpt
# insmod fat
# set root='hd0,gpt2'
# if [ x$feature_platform_search_hint = xy ]; then
# search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 16DC-8816
# else
# search --no-floppy --fs-uuid --set=root 16DC-8816
# fi
# chainloader /EFI/Microsoft/Boot/bootmgfw.efi
menuentry "Windows 8 UEFI" {
set root='(hd0,gpt2)'
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
========================= sda6/syslinux/syslinux.cfg: ==========================
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 0 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux.img
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux-fallback.img
#LABEL windows
# MENU LABEL Windows
# COM32 chain.c32
# APPEND hd0 1
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL poweroff
MENU LABEL Poweroff
COM32 poweroff.c32
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sda6: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sda6: Version of COM32(R) files used by Syslinux: ===============
syslinux/cat.c32 : not a COM32/COM32R module
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/cmd.c32 : not a COM32/COM32R module
syslinux/config.c32 : not a COM32/COM32R module
syslinux/cptime.c32 : not a COM32/COM32R module
syslinux/cpuid.c32 : not a COM32/COM32R module
syslinux/cpuidtest.c32 : not a COM32/COM32R module
syslinux/debug.c32 : not a COM32/COM32R module
syslinux/disk.c32 : not a COM32/COM32R module
syslinux/dmitest.c32 : not a COM32/COM32R module
syslinux/elf.c32 : not a COM32/COM32R module
syslinux/ethersel.c32 : not a COM32/COM32R module
syslinux/gfxboot.c32 : not a COM32/COM32R module
syslinux/gpxecmd.c32 : not a COM32/COM32R module
syslinux/hdt.c32 : not a COM32/COM32R module
syslinux/hexdump.c32 : not a COM32/COM32R module
syslinux/host.c32 : not a COM32/COM32R module
syslinux/ifcpu.c32 : not a COM32/COM32R module
syslinux/ifcpu64.c32 : not a COM32/COM32R module
syslinux/ifmemdsk.c32 : not a COM32/COM32R module
syslinux/ifplop.c32 : not a COM32/COM32R module
syslinux/kbdmap.c32 : not a COM32/COM32R module
syslinux/kontron_wdt.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libgpl.c32 : not a COM32/COM32R module
syslinux/liblua.c32 : not a COM32/COM32R module
syslinux/libmenu.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/linux.c32 : not a COM32/COM32R module
syslinux/ls.c32 : not a COM32/COM32R module
syslinux/lua.c32 : not a COM32/COM32R module
syslinux/mboot.c32 : not a COM32/COM32R module
syslinux/meminfo.c32 : not a COM32/COM32R module
syslinux/menu.c32 : not a COM32/COM32R module
syslinux/pcitest.c32 : not a COM32/COM32R module
syslinux/pmload.c32 : not a COM32/COM32R module
syslinux/poweroff.c32 : not a COM32/COM32R module
syslinux/prdhcp.c32 : not a COM32/COM32R module
syslinux/pwd.c32 : not a COM32/COM32R module
syslinux/pxechn.c32 : not a COM32/COM32R module
syslinux/reboot.c32 : not a COM32/COM32R module
syslinux/rosh.c32 : not a COM32/COM32R module
syslinux/sanboot.c32 : not a COM32/COM32R module
syslinux/sdi.c32 : not a COM32/COM32R module
syslinux/sysdump.c32 : not a COM32/COM32R module
syslinux/vesainfo.c32 : not a COM32/COM32R module
syslinux/vesamenu.c32 : not a COM32/COM32R module
syslinux/vpdtest.c32 : not a COM32/COM32R module
syslinux/whichsys.c32 : not a COM32/COM32R module
syslinux/zzjson.c32 : not a COM32/COM32R module
=============================== sda9/etc/fstab: ================================
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda9
UUID=1a765403-f251-43d8-8edf-c191475d3837 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda6
#UUID=9C3F-2A9E /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
UUID=9C3F-2A9E /boot vfat defaults 0 2
UUID=9C3F-2A9E /boot/efi vfat defaults 0 1
============== sda9: Version of COM32(R) files used by Syslinux: ===============
boot/syslinux/cat.c32 : not a COM32/COM32R module
boot/syslinux/chain.c32 : not a COM32/COM32R module
boot/syslinux/cmd.c32 : not a COM32/COM32R module
boot/syslinux/config.c32 : not a COM32/COM32R module
boot/syslinux/cptime.c32 : not a COM32/COM32R module
boot/syslinux/cpuid.c32 : not a COM32/COM32R module
boot/syslinux/cpuidtest.c32 : not a COM32/COM32R module
boot/syslinux/debug.c32 : not a COM32/COM32R module
boot/syslinux/disk.c32 : not a COM32/COM32R module
boot/syslinux/dmitest.c32 : not a COM32/COM32R module
boot/syslinux/elf.c32 : not a COM32/COM32R module
boot/syslinux/ethersel.c32 : not a COM32/COM32R module
boot/syslinux/gfxboot.c32 : not a COM32/COM32R module
boot/syslinux/gpxecmd.c32 : not a COM32/COM32R module
boot/syslinux/hdt.c32 : not a COM32/COM32R module
boot/syslinux/hexdump.c32 : not a COM32/COM32R module
boot/syslinux/host.c32 : not a COM32/COM32R module
boot/syslinux/ifcpu.c32 : not a COM32/COM32R module
boot/syslinux/ifcpu64.c32 : not a COM32/COM32R module
boot/syslinux/ifmemdsk.c32 : not a COM32/COM32R module
boot/syslinux/ifplop.c32 : not a COM32/COM32R module
boot/syslinux/kbdmap.c32 : not a COM32/COM32R module
boot/syslinux/kontron_wdt.c32 : not a COM32/COM32R module
boot/syslinux/ldlinux.c32 : not a COM32/COM32R module
boot/syslinux/libcom32.c32 : not a COM32/COM32R module
boot/syslinux/libgpl.c32 : not a COM32/COM32R module
boot/syslinux/liblua.c32 : not a COM32/COM32R module
boot/syslinux/libmenu.c32 : not a COM32/COM32R module
boot/syslinux/libutil.c32 : not a COM32/COM32R module
boot/syslinux/linux.c32 : not a COM32/COM32R module
boot/syslinux/ls.c32 : not a COM32/COM32R module
boot/syslinux/lua.c32 : not a COM32/COM32R module
boot/syslinux/mboot.c32 : not a COM32/COM32R module
boot/syslinux/meminfo.c32 : not a COM32/COM32R module
boot/syslinux/menu.c32 : not a COM32/COM32R module
boot/syslinux/pcitest.c32 : not a COM32/COM32R module
boot/syslinux/pmload.c32 : not a COM32/COM32R module
boot/syslinux/poweroff.c32 : not a COM32/COM32R module
boot/syslinux/prdhcp.c32 : not a COM32/COM32R module
boot/syslinux/pwd.c32 : not a COM32/COM32R module
boot/syslinux/pxechn.c32 : not a COM32/COM32R module
boot/syslinux/reboot.c32 : not a COM32/COM32R module
boot/syslinux/rosh.c32 : not a COM32/COM32R module
boot/syslinux/sanboot.c32 : not a COM32/COM32R module
boot/syslinux/sdi.c32 : not a COM32/COM32R module
boot/syslinux/sysdump.c32 : not a COM32/COM32R module
boot/syslinux/vesainfo.c32 : not a COM32/COM32R module
boot/syslinux/vesamenu.c32 : not a COM32/COM32R module
boot/syslinux/vpdtest.c32 : not a COM32/COM32R module
boot/syslinux/whichsys.c32 : not a COM32/COM32R module
boot/syslinux/zzjson.c32 : not a COM32/COM32R module
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown GPT Partiton Type
e7afbfbf4fa38a449a5b6213eb736c22
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-p9ML2Cte/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-p9ML2Cte/Tmp_Log: No such file or directory
/dev/cdrom: open failed: No medium found
/dev/sdb: open failed: No medium found
No volume groups found
mdadm: No arrays found in config file or automatically
Any ideas?
Here's my grub.cfg:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 1a765403-f251-43d8-8edf-c191475d3837
else
search --no-floppy --fs-uuid --set=root 1a765403-f251-43d8-8edf-c191475d3837
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-16DC-8816' {
insmod part_gpt
insmod fat
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 16DC-8816
else
search --no-floppy --fs-uuid --set=root 16DC-8816
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
Last edited by knowNothing23 (2013-12-30 00:17:02)

Hi,
New to this forum, joined today in anticipation of trying an install of AL...For whatever this may be worth:
I have an HP Pavillion desktop that came with Windows 8 (now 8.1), & has, of course, a UEFI boot system. I tried earlier to install Ubuntu Studio (which I currently run) on the same disk as Windows (/dev/sda), I made (I believe) a huge mistake in trying to install as LVM/ext4... wiped out my Windows install & made the UEFI unavailable... I had to do a complete re-install of Windows (fortunately, I did the recommended system backup, using 4 DVD's!) so then I tried a (non LVM) install on an external usb 3.0, with the Grub 2 on the external disk (great access time, & it worked fine... IMO)...
One other item: as I have been trying to find the right flavor of Linux for my main purposes, I have been trying various distros. & having to try to learn to negotiate the UEFI, secure/legacy procedures (still learning)... As I was unsure of installing rEFind... I did down load the .iso, burn it to a CD...
http://www.rodsbooks.com/refind/getting.html
& in legacy mode, found that simply putting it (rEFind CD into the CD/DVD player, which in the UEFI it is labeled something like HP/UEFI CD/DVD), & then launching it, rEFind worked for some other distros...that is, I was able to boot into my Linux distros, even bypassing Grub), as well as having the option of booting Windows. It may seem trivial that I say this (it maybe is), but I have not seen anywhere (I have scoured the internet rather well) this mentioned as a possibility (though it, of course, would not make such a good permanent solution, especially for computers like mine that have only one CD/DVD player).
HenryP

Dual Boot Windows Boot Error (Required Device Inaccessable)

I used to be dual booting Ubuntu & Windows 7. Have since replaced Ubuntu with Arch. Now I just installed GRUB2 and configured to to dual boot windows, but I found that Windows does not want to boot. I Googled and found http://www.petri.co.il/forums/showthread.php?t=42099, it looks like the same error codes and message. Problem is if I run Windows Startup Repair my GRUB will be gone and I need to restore it somehow? Is it possible to fix through Linux?
Last edited by jiewmeng (2012-05-09 04:01:04)

jiewmeng wrote:I used to be dual booting Ubuntu & Windows 7. Have since replaced Ubuntu with Arch. Now I just installed GRUB2 and configured to to dual boot windows, but I found that Windows does not want to boot. I Googled and found http://www.petri.co.il/forums/showthread.php?t=42099, it looks like the same error codes and message. Problem is if I run Windows Startup Repair my GRUB will be gone and I need to restore it somehow? Is it possible to fix through Linux?
https://bbs.archlinux.org/viewtopic.php?id=140730
https://wiki.archlinux.org/index.php/GR … mand_shell
http://axel668.blogspot.com/2011/03/how … grub2.html

Bought new SSD, need to change Windows boot drive

I just bought a new H415. The operating system (Windows 7 Home Premium) is on the current 500gb hard drive, and I want to switch it to my new 128GB SSD drive on the same computer. I've tried about everything, including cloning,system restore, etc, but can't get it to work. It shouldn't be that difficult, but it is. I'm out of options. Any help?

Did you burn a recovery disc set? Use that to install to the SSD. You do not want to clone the drive to the SSD because the alignment will be off which will cause a major performance hit.

How to reboot osx lion after booting in win 7

Hi installed lion on MacBook. Booted into win 7 ( was dual boot in Osx). Can't reboot into lion now. If I choose ' reboot into Osx ' in windows boot camp - it reboots into win7. If I hold alt and reboot, it boots into lion, then restarts immediately into win 7. Have keynote to give in a few hours and am now desperate.
Sorry for spelling having to write this on iPad and autocrooect is a birch.

If you completely wipe the original Mac mini boot drive you will wipe the Server.app software an dlose it. You should make a backup first, perhaps by saving the entire boot drive as a Disk Image file on to another drive.
In terms of install 10.6, the 10.6 DVD will not boot on the new Mac mini even if you connect a DVD drive. You need to put the Mac mini in to FireWire Target Disk Mode and connect it to an older Mac that will allow booting from that DVD, then install on to the Mac mini (over FireWire), you then need to upgrade it using the 10.6.8 Combo Updater this will add the drivers needed for the new Mac mini.

Partition Table Looks Different Between OSX and Windows 7

Hey all,
I recently replaced the hard drive on my 2007 iMac, going from the 320GB drive to a 1 TB drive. It actually worked! The previous drive was failing in very odd ways, though booting into the Windows side (more on dual boot later) always seemed to work, and S.M.A.R.T. always reported that the physical drive seemed OK.
The previous drive (320 GB) had around 200GB devoted to OSX and 100GB partitioned off for a working Windows 7 installation (custom installed x64 Win7 Ultimate). I had the Windows system image backed up to my NAS, and had a Windows system bootable disc to restore that image.
After replacing the drive (and almost crying that I had actually done it right), I first restored OSX from a Time Machine backup, and let it take the full 1TB of space as Journalled HFS+. Then, I used Disk Utility to shrink OSX down to 500GB, and created a second partition (formatted to NTFS) with the remaining 500GB.
Now, restoring a Windows system image is an odd thing, as it tries to do a lot of partition work as opposed to simply restoring the Windows install to a partition. I tried Macrium Reflect first (made a backup in that, too), and it looked like it was going to let me restore to the second partition. It completed the restore...and the entire hard drive was hosed. Partitions had been moved, renamed, resized, and nothing was bootable. I had to use Recovery from an external USB thumb drive to go back to the single, full-drive install of OSX.
Then I tried again. Made the second NTFS partition and used the basic Windows System Restore disk to restore from the standard system image I had on the NAS. I was not expecting this to work. But it did. Windows started showing up in Startup Manager when "option" was pressed on bootup, and both OSX and Windows booted properly and ran fine. This is where I (finally) get to the supreme oddities:
OSX Disk Utility still reports two 500GB partitions, one for OSX and one for Windows.
In OSX the Windows partition shows as having NO DATA on it. Not sure what would happen if I tried to write a file to it when mounted, but there is no data on it when viewed from OSX (I was always able to see the Windows files when I mounted that partition on the previous drive).
The Windows partition does not show up as a valid bootable system in System Prefs --> Startup Disk (naturally, I suppose, since OSX doesn't think there is anything there).
From the WINDOWS side, Windows still sees the old partition table: 200GB for the "unknown" HFS partition, and then the rest of the space can be devoted to Windows (started as 100GB, but I was ablt to expand it to use the remaining ~750GB!). Windows thinks it can have 750GB of space even though I know its partition is only 500GB in size!
Windows cannot see the OSX HFS partition data using HFSExplorer. It CAN see the HFS partition on the attached backup drive (the drive I use for Time Machine).
GParted (a partition program on a Linux bootabld CD-ROM) shows the same partitions as OSX Disk Utility (2x500GB), and also thinks the Windows NTFS partition is empty (all space reports as "unused").
Did I mention both OSX and Windows work fine???
There are, of course, two other partitions on the drive: the first partition is the 200MB one I always see (EFI/GUID portion?), and then between the HFS and NTFS partitions is the 600MB recovery partition (which also shows at option-pressed boot time). OSX, GParted, and Windows see all four partitions, and in the same order. It is just that Windows sees the wrong sizes, and OSX cannot see any data in the Windows partition.
Surely this is all going to break spectacularly at some point, isn't it? What if I ever did write a file to the Windows side from OSX, or what if OSX starts taking more space than the 200GB Windows thinks is the max for that partition? What if I try to make Windows use more than 500GB because it thinks it has almost 800GB to use? What if I defrag the Windows drive?
I had no idea a partition table could look this goofy and yet still have everything be bootable and workable. Is there something I can do to get everything in sync? Basically, I am assuming I need to get Windows to do some low-level kung fu in Disk Manager in order to properly get everything lined up with the "right" partitions as reported by both GParted and OSX Disk Utility. But how do I do that?
By the way, any ideas that totally nuke the drive and start from scratch are completely fine (if it seems like they are doing something different enough that I'd give it a try). I have good backups of both OSX and Windows and have restored them about a half dozen times already as I dealt with the previous failing hard drive and with trying to get dual-boot working again. Not to mention, this iMac is now my secondary machine to the new Mac Mini I got a couple weeks back when I wasn't sure how much more life I was going to get from this 6+ year old iMac.
Thanks for listening to me ramble about this very odd issue, and a huge THANK YOU in advance to anyone who has ideas to help.
Thanks,
sutekh138

Update:
I am pretty sure the issue is a simple GPT/MBR discrepancy.
I installed rEFIt and used it's partitioning tool (gptsync built in) upon bootup. It was able to show the GPT table and the MBR table, but it thinks the second partition of the drive (the Mac OSX bootable partition) is "extended" in the MBR table and says "will not touch this disk."
However, it does look like an MBR sync should be straightforward, as there four partitions in the GPT table and four in the MBR (and MBR allows a max of four, AFAIK). I just need gptsync to relax some rules. I found a link to a supposedly newer version of gptsync compiled for OSX, so I will try that later.
First, I will try Partition Wizard, a free tool I found for the Windows side. It has a "Repair MBR" option that I would have tried last night if I weren't running a new Windows Image Backup in case all of this goes haywire. *smile* The PW tool also has an option to change the MBR over to GPT entirely. That might work, but then I am not sure Windows 7 will boot (from what I read, x64 Win7 running on EFI-enabled hardware should work, but who knows).
Anyway, I will try the following things, in order, until something works, when I get home tonight:
From Windows, run Partition Wizard and try "Repair MBR".
From OSX, download recent gptsync and try to run it.
From Windows, use Partition Wizard to do a full MBR --> GPT conversion.
Nuke the Windows partition in OSX Disk Utility, expand the HFS partition to take up the whole drive, and then add a Windows-bootable partition via Boot Camp-ish command line commands (diskutil). Because if nothing else works, I have to assume I just created the partitions wrong in the first place such that a Windows restore miraculously works, but the partition weirdness is just a timebomb waiting to happen.
Finally, if none of the above work, I'll just get things back to the way they now work and wait for the timebomb to (possibly never) go off. *smile*
I'll update this thread if I get something figured out, in case anyone else stumbles upon it...
Thanks,
sutekh138

Re-installed fresh Snow Leopard, Boot camp boots,but wont show on startup..

Ok, I had Boot Camp on my iMac with Snow Leopard fine. I decided to reinstall Snow Leopard fresh.
Chose the Mac HDD partition, it re-installed fine. I then thought I'd have to do the Boot Camp again, but I held don "alt" key and Boot Camp boots fine and works.
So I normally have the Boot Camp to boot 1st, as wife and kids use Windows. However I go into Boot Camp on Mac OS, and it doesn't show the boot camp startup disk. Where's it gone?
As I say everything is fine, apart from it now looks like its lost track of the Boot Camp partition.
Is there anyway I can get it back? I ran Boot Camp wizard on Mac, but it either wants to create a new Boot Camp partition, or run windows installer, both which I dont want.
Any help please
chers

Set the default startup disk in Windows.
There is no Boot Camp on Mac OS ("go into Boot Camp"?)
Try:
System Preferences / Startup Disk
On Windows, the Boot Camp Control Panel to used set the default OS
Wizard: by this assume Boot Camp Assistant, which is only a partitioning tool.
Boot Camp doesn't "boot," Windows boots.
Boot Camp - Assistant to create a partition
Boot Camp - Set of drivers and services
Boot Camp - Control panel in Windows to set default boot OS (Mac OS X volumes or Windows, with some other features for laptops I believe)
Personally, too many things use the same name and lead to misunderstandings.

Can a MBP 9.1, OSX 10.8.5 boot Windows 8 from SSD in optical bay?

Can a MacBook Pro 9.1 running Mountain Lion 10.8.5 boot Windows 8 from an SSD mounted in the optical bay?
Please don't reply with information about doing this with older Macs, previous OSX or Bootcamp versions. There's a mountain (like in the movie "Idiocracy") of old info out there -- all relevant in the past and with older stuff, undoubtedly; but I'm seeking the latest knowledge about the latest hardware and software, based on actual experience.
Thanks!

Thank you QuickTimeKirk...used toast to burn project... my project was in .mov, i tried to play it a dvd player, it did play... will try again tomorrow using another dvd player just to be sure it'll will really work with dvd players. thank you again for your reply *=)

Macbook Pro (2010) slow/unresponsive booting OSX from Windows

Hello All,
Let me introduce myself. My name is Josh and I am currently deployed in Afghanistan and also pursuing an Info Sec degree. As such I was forced to boot camp Windows 7 on my Mac in order to complete certain classes needing Windows and Windows software. I am running into some issues that I can not seem to work around. First I will give the stats of my computer then try to explain the issues I am encountering.
Macbook Pro 13inch Mid 2010
2.4 GHz Intel Core 2 Duo
16GB memory
Crutial 256 GB SSD
OSX 10.9.2
Windows 7 Professional
New battery
I partitioned the SSD in half for both Windows and OSX. Each has around 30 GB of data on each side. I installed the SSD and memory around 6 months ago and everything worked flawlessly. Needing Windows and being cheap I decided to dual boot, through bootcamp, the two operating systems. Install, although a pain, was completed sucessfully and worked great. It has been installed for about 3 months and ran flawlessly. I have kept up with updates on both sides and running antivirus on Windows. I rarely do any work besides school on Windows but run the antivirus regularly for protection. These issues arose a few days ago. One issue I encounter periodically is that when booting to Windows I hold down the control key and it still loads OSX. I have to try several times to get it to boot Windows. Sometimes it works first try. Once in Windows everything works as it should and fast with the memory and SSD. When I shut down the computer and return to OSX everything loads as normal with the same speed except when I go to open an application. It takes several minutes of spinning wheel for it to open. Until then it is slow and often unresponsive. If I let it run its course it will eventually calm down and work correctly. During this time the fan kicks on. Another issue is that sometimes one of my external hard drives fails to read. I can unplug and plug it back into each of the USB hubs with no luck. The two external hard drives I have are one for Time Machine backups- 1TB Western Digital and the other for all my work- 1TB Western Digital. Each hard drive is scanned with Windows 7 during antivirus checks. Finally, I installed a new battery, as mine was gone, and since the install I do not get the same life span out of a charge (around 5 hours max with little use). If anyone has any advise please feel free to contribute. I would like to solve the issue. Thank you for your time and if you need any more information I would happily provide.
Also: I will be creating another thread for two more Macbook Pros I am working to resolve issues.
Josh

Josh,
have you tried resetting your MacBook Pro’s System Management Controller, to see if it would have any effect on your battery life and fan frequency?

OSX dissapears after booting Windows in Bootcamp

Hi community,
I have a very odd problem that has been puzzling me for week and maybe there a guru out there that can give me a hand
Here is the situation:
I have an iMac (mid 2011) i5 with 12 Gb RAM with 2 hard disk: 1TB HD on SATA port 1 and 128Gb SSD on port 2.
I've been running Mavericks with no issues until I decided to install Windows 7 - Ultimate 64 bits using Bootcamp on a 500Gb partition of the 1 Tb drive.
Everything worked fine and I was able to use Windows for a while, but when I booted the iMac my OSX was gone (not even pressing Alt). I mean the whole partition for OSX was gone forcing me to restore from my TimeMachine backup to be able to use OSX again.
So I thought that something went wrong in the installation and I did it again erasing the windows partition and reinstalling. Same result: OSX disappeared once a vanilla Windows boots. Ok, so I thought, there's something wrong with my OSX installation. In order to fix it, I booted the computer into UBUNTU to use gparted and delete ALL partitions including the EFI and hidden partitions (this was the only way I found to be able to do it). Then, using an USB stick, I installed a fresh installation of OSX into the SSD and did not restore from TimeMachine. I started bootcamp and installed Windows on the HD (whole drive)... and you guessed ... same result. I have no clue of what can be happening, but I'm not able to use this iMac with Windows and OSX. Any help is much appreciated.
Thanks
Jacobo

I have no clue either (I virtualize Windows and other OS's so have no experience with Boot Camp), but since Boot Camp appears to be the culprit, I'd suggest posting your question in the Boot Camp Community forum too, since there's a better chance that someone there has also been bitten by that bug.

Trouble booting Windows 8 from mSATA SSD drive on HP Envy

I’m having an issue booting Windows 8 from my mSATA SSD drive (I believe that’s the correct terminology, it connects directly to the motherboard.) I have a HDD that, it appears to me, it is trying to boot from. The bios does not let me specifically select the boot drive, just disk. I can boot from the SDD if I either remove the HDD or go through boot options and select to boot from an EFI file. A little background – I’ve had this running Windows from the SSD drive since I got it (installed that way) and using the HDD for storage. My SSD drive had been removed and Windows installed on the HDD (since this is the HP forum I won't get into how this happened when I sent my laptop in for an unrelated repair.) Seems I should be able to get it booting from the SSD again since it has not changed. I’ve since removed the partitions and reformatted the drive. I also tried setting up the EFI files on the HDD using BCDBOOT, maybe I didn’t need to/did it wrong/something else. Seems this is not an uncommon issue but trying various things I’ve not yet been successful. Any help would be appreciated.

Hi Ralph,
thanks a lot for the helpful information! But the problem still persists, and I don't know what's wrong about the installation. I again checked the case and device are fully compatible with Windows 8 on USB 3 and the current boot camp drivers are installed - so everything should work perfectly fine as Windows 8 does natively support booting from external USB-3-devices.
I personally still assume it's rather a driver related problem as the external SSD doesn't even show up whilst booting into the boot menu with "Alt" pressed - I can only choose to boot from the external SSD within the "start volume" menu in OSX (which then doesn't work out when rebooting, unfortunately). I mean, if there was a chance to boot from the external SSD with the configuration I got right now, but OSX/the iMac just "doesn't know" it shall boot from the external partition and therefore rather chooses the internal boot camp partition, the SSD would at least show up in the boot menu when pressing "Alt" on start-up, or do I go completely wrong? I even tried to rename the internal bootcamp partition (which did not work out) or disable it in order to prevent OSX/the iMac to boot from the internal bootcamp partition, but it didn't help: After rebooting it again chose the internal boot camp partition to start from.
Might the deletion of the internal partition be worth a try? Meaning is there a realistic chance that the issue might be caused by that? I would give it a try although I really don't wanna loose the internal boot camp partition for no good reason (btw: would it be possible to clone an image back from the external SSD to the internal HDD then?). Or do you maybe have any other idea what driver could miss resp. could be wrong about the installation so the boot process from the external SSD fails...?
Again MANY MANY THANKS in advance for your further assistance, everybody!!

Boot windows 7 from an external ssd/thunderbolt drive

I have an iMac 27", Mid 2011, 3.4 Ghz i7 Quad core with a 2TB internal HDD OSX 10.7.5 and a MacBook Air 2014 - Mavericks.
I want to create either a 64Gb USB 3 Flash stick or, if necessary (as I would have to buy it) an external thunderbolt drive to run Windows 7 rather than partition my internal hard drive on either computer.
Basically I want to create a totaly portable windows boot drive to run windows 7 and some software I need for work (I just really hate using my slow, POS, work laptop) to run on either mac as I need it
Is this possible?
Will bootcamp recognise either of these types of drives to switch between OSX and Windows - I know USB drives are not recognised?
Can someone point me in the right direction on idiot proof instructions on how to create this?
Thanks for your help in advance

That is true, and may indeed work. You'll likely know during the installation of Windows if it allows you to select a partition on an external drive to install it to.
I'd be very interested in hearing your results.

Boot Windows 7 Off of External SSD?

So I currently have a Macbook Pro Retina (mid 2012) with 500gb of SSD. I have it split (320gb mac/180 win) because I use it for Final Cut Pro editing on the mac side and Steam/PC Gaming on the Windows side. I am considering purchasing a Transcend Jet Drive Updgrade kit to swap out my internal drive to a 960gb.
http://www.amazon.com/dp/B00JKCHMP0/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&coli d=1TN78YRCF5IMH&coliid=I3005EZ5353XU2&psc=1
I am thinking about leaving the 960gb internal as a solely Mac formatted drive and taking the leftover 500gb SSD and Transcend Casing and making it solely a Windows formatted drive. Theoretically this would mean I have a portable Windows machine, whenever I plug in the small casing via USB 3.0. This has raised some questions though...
Can you boot Windows form a USB 3.0 Externall SSD?
Will there be speed or preformance issues, specifically if I plan on gaming on the windows drive, or will it be as fast as it is usually when playing on the internal drive?

M. Video Productions wrote:
<snip>
Can you boot Windows form a USB 3.0 Externall SSD?
<snip>
No

Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel. Please Help.

Hello,
I'm currently in mac recovery. I have a 21.5'' iMac (I think late 2011). I'm running OSX mountain lion and I think its kept up to date. Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel (not the beachball one). This seems to go on for ever (at least 3 hours) ant will not boot. Booting in safe mode does not work and results in the same problem. As I said earlier I can get tom recovery mode. Thanks Oliver.
I have on/for my machine:
Mac OSX mountain lion
Windows 7 Pro 64bit
4GB of ram
OSX 10 FULL backups (External 2TB drive)
500GB HDD
Please ask if you would like more Information.

Hello, disconnect any external drives for now.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

SSD as OSX boot/Windows boot

Similar Messages

Maybe you are looking for