SSD Drive support

Hi,
    i bought 1 year ago an Envy 1791-el and now, after this time I'd like to change the two internal hard drives with two SSD drives.
However I've still a doubt: in the pdf manual I downloaded there is a section with a lot of combination of the two hard drives slots, but I cannot find a combination of two SSD drives.
What do you think about it?
Is it possibile to install two SSD drives onto this computer?
Thanks in advance,
Best regards,
Marco Barbaro

Thanks for your reply!
Only one doubt left: do you think it will accept SSD Drives with Sata III interface (because now the shops usually sell this kind of SSD drives) even if now I have two SATA II drives installed?

Similar Messages

  • MSI GT660 need a custom bios for SSD drive support

    HEllo,
    I am looking for a custom bios that has SSD support for my MSI GT660 003us note book.
    Thanks

    hello, what issue you have with the ssd?

  • What SSD Drives are supported on the T420

    I am getting a T420 as my new Corporate laptop.   I want to buy an SSD drive to replace the internal hard drive.   I found the newest bios/firmware and looked at the Readme file.  It lists the latest drives and model numbers but not any of the previous models?   How do I get a complete list of all SSD drives/models supported on the T420?  The laptop is going to be imaged with Win7 if that matters.  
    Any info is appreciated.  
    Solved!
    Go to Solution.

    Hello and welcome,
    Any list of drives you find in the README will be a list of drives supplied by Lenovo, not a generic list of drives that would work.
    From the ltwbook ( ThinkPad Notebooks; 2005 to present (withdrawn models) ):
    Some: Solid State Drive (SSD) / SATA 3.0Gb/s, 2.5" wide, 7mm high
    Some: Hard Disk Drive / SATA 3.0Gb/s, 2.5" wide, 9.5mm high, Active Protection System™
    So if you're replacing a hard drive, any 2.5" 9.5mm (or 7mm with adapter) SSD should fit.
    Another option you might consider is an mSATA SSD. [edit] If the WWAN/mSATA slot is empty - no WWAN card installed.  I use a 256GB Crucial m4 in my T420.  The HDD is still installed as a data drive and spins down when idle.  It's a nice quiet combo with plenty of storage.  I also keep a backup of the SSD on the HDD.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Does my MacBook pro Early 2011 supports an Samsung 840 pro SSD drive???

    Hi guys!
    I want to improve my macbook pro  15" early 2011 by installing a ssd drive on it! I just want to no know if a samsung 840 pro with 512gb will be compatible with my model. Its a serial ATA 6 gbs model.
    thanks!

    If you install it in the main drive bay it should work just fine. If you install it in the optical bay, replacing the dvd drive, it may or may not work correctly.

  • Not enough space on my new SSD drive to import my data from time machine backup, how can I import my latest backup minus some big files?

    I just got a new 256GB SSD drive for my mac, I want to import my data from time machine backup, but its larger than 256GB since it used to be on my old optical drive. How can I import my latest backup keeping out some big files on the external drive?

    Hello Salemr,
    When you restore from a Time Machine back up, you can tell it to not transfer folders like Desktop, Documents. Downloads, Movies, Music, Pictures and Public. Take a look at the article below for the steps to restore from your back up.  
    Move your data to a new Mac
    http://support.apple.com/en-us/ht5872
    Regards,
    -Norm G. 

  • I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

    I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

    Tech support is not normally available on weekends.  You should contact them as soon as the weekend passes and pick up where you left off with them.

  • How do I copy the removed SSD drive from a water-damaged MB Pro to another Mac?

    My son's MacBook Pro (early 2012) was ruined by a pint of water. The insurance company kept the laptop but returned its 256GB SSD drive. I've looked everywhere online – Apple's telephone support is as good as useless given they want a serial number and want to charge me £35 – for a caddy or SATA adaptor of some sort to copy files from the Sandisk SSD drive. I basically need something I can plug the SSD drive into that has a USB lead to plug it into another Mac so I can copy photos, word docs and MP3s. I can't believe it could be so difficult - it's just a hard drive, after all. Your help greatly appreciated.

    Keetle wrote:
    ...I basically need something I can plug the SSD drive into that has a USB lead to plug it into another Mac so I can copy photos, word docs and MP3s. I can't believe it could be so difficult - it's just a hard drive, after all. Your help greatly appreciated.
    This should do the trick, and will work with laptop and desktop drives too. And it doesn't rely on power from the USB port to make the drive work, which can sometimes be an issue.

  • Does anybody have a functioning 17" mbp with a 6Gb/s SSD drive?

    I ordered a MacBookPro 17" (June 2011) with the 7200rpm hard drive which is a slow drive, but comes at no extra cost with the machine.
    The ssd's Apple ships with the mbp's are relatively slow and expensive, so I do not consider them an option. I therefore ordered an OWC Mercury Pro 6G (240GB) sata3 SSD drive and replaced the hard drive with it. Under both Snow Leopard and Lion I get beach balls almost continuously. Installing the ssd in a co-workers 15" mbp makes the drives work at over 500 mb/s, so the drive is not the problem.
    I explained this to the people at AppleCare's helpdesk and they state, since I used a non Apple item, they can't help me. They tell me to go to a local reseller and have them install the ssd for me. This way the mbp is still valid for AppleCare. The local reseller won't touch my mbp since I bought it online at Apple (and not at his store), plus I did not buy the OWC drive in his store. In short, AppleCare is useless here. They claim I should've ordered one of the Apple ssd's (which are basically sata2 drives).
    Since the 17" mbp supports sata3 and has the fastest processors of the mbp range (which is why I bought it in the first place) I do not understand why Apple would force me to 'downgrade' to a non current ssd. I work with large 3D drawing files as well as multilayered large photoshop files, so having a fast drive is very beneficial to my workflow. The hardware in the 13" and 15" mbp's support the functionality of a 6G ssd in practice, whereas the 17" mbp only does that on paper. Selling my 17" and swapping it for a 15" model seems the only option but I refuse to believe a company that claims to be technologically advanced can ignore having specifications that only work on paper. There is no record, comment or even gossip of Apple indicating this is a problem, let alone they are working on a fix, despite finding numerous forums online where people have the same problem I have.
    So for the record, on the official Apple Support site, directed to both Apple developers and users:
    Is there anybody that has a functioning 17" MBP with a 6Gb/s SSD?
    If you have, please let me know the specs or your machine and drive so I can see if there is a solution to unleash the full potential of my MBP.
    I believe there is no sadder sight than the sullen tread of a caged (osx) Lion. Help me free the desert's fallen king!! ;-)

    Thanks wjosten for your reply. I filled out a feedback form.
    To comment on AussieDJ's post: I tried the OWC shielding kit, doesn't work. The problems described with 6Gb/s ssd's were all with pre March MBP's. Mine is a June 2011 MBP so I figured the problem would've been solved in the mean time. I guessed wrong there. Since I waited for the release of OSX Lion (and the trim support functionality) I thought this would solve the spinning beach ball issue. I guessed wrong there as well. Can't return the ssd anymore (>30 days) so I glued the ssd on our offices "wall of shame". Being an architecture office we have everybody in the office put up poorly designed objects here (sort of a cool and uncool board but then labelled ***? and No way!). I should've glued y 17" MBP on this wall actually (since it's hardware does not work with the 6Gb/s ssd), but the bugger is too heavy and won't stick... ;-)
    The worst part of the story is that my dad got his 6Gb/s ssd to wortk in his windows notebook...and he does not skip an opportunity to rub it in (your MBP can't do no 6G)!
    Let's hope there will be an EFI update!

  • I have two drives in my macbook pro. How can I download my apps to my second data hard drive instead of my OS SSD drive?

    I have two drives in my macbook pro. How can I download my apps to my second data hard drive instead of my OS SSD drive? Is there a way to point the default directory in the app store to a different hard drive? Certainly for a Mac Pro this makes sense.

    Hi,
    See if there is anything in this Link that applies:
    http://support.apple.com/kb/HT4337
    Cheers,  

  • Installing three SSD drives on Mac Pro

    Hello,
    I followed the advice given here and bought 3 Samsung 840 SSD drives for my Mac Pro. Two of them are 120GB and one is 250GB.
    I also purchased a Tempo SSD Pro 6GB/s SATA PCIe Drive. Only one of them (that holds two SSDs.)
    I plan on using:
         • one SSD for the OS and APPS
         • one SSD for a PS scratch disc
         • one SSD for the photoshop, premiere pro, and after effects files I'm currently working on.
    I figured I'd keep the 1TB HDD currently used in the computer to store all my other files.
    I also have a 1TB seagate extrenal HDD that I would like to set up as a back up or time machine.
    Does this sound good?
    If so, which SSD do I install in my regular sliding drawer bay? I have 2.5" - 3.5" adapter.
    Which two do I install on the PCIe card?
    Which on do I use for what?
    As you can see I'm clueless. Lol
    Here are my specs before adding the SSDs.
    Mac Pro
    Mid 2012
    Processor  3.33 GHz 6-Core Intel Xeon
    Memory  48 GB 1333 MHz DDR3 ECC
    Graphics  ATI Radeon HD 5870 1024 MB
    Software  OS X 10.8.4 (12E55)
    Storage  1TB Sata disc (423.26GB free),
                   1TB External USB Disk freeAgent GoFlex Drive (988.58 free)
    P.S. I'm unsure about being able to install my current O.S. on the new SSD. When I bought the Mac Pro it had an older version of OS on it with a free download of the new OS. So the disc will only have the older version. Will I have to pay for the newer one or can I somehow copy it from the current HDD drive it's installed on?
    Thank you so much. You have already been a HUGE help in the past posts and look forward to your wisdom.  8 )
    Matt

    Clone the system to the SSD you plan to use for system.
    How much disk space is your system using now? w/o incl. anything in /Users, so just system.
    If your system uses 60GB you want to use the 240GB SSD.
    I think 120GB is on small side for scratch alone.
    move projects to scratch array when you want to work on them:  "Work disk + scratch" is fast. Then move them off the array, erase the array, and start a new project.
    I would try the 2 x 120 SSDs on PCIe 6G as scratch and see how it feels and works.Try and test.  No harm. I think that is what most people do, they experiement and try out different setups to find the one that works best for them.
    Important: Have a clone of the system and be ready to restore or move it around as needed.
    Install TRIM Enabler of course.
    SSD Maintenance
    Samsung recommends setting aside 10% for over-provisioning.
    Their Windows utility, shame there isn't a Mac version.
    #2: Try system on 120GB in drive bay with an adapter
    With that then use the other two on the Tempo.
    Those could be one large 360GB volume JBOD.
    You will have to see how much your scratch space gets used.
    I would have argued for 3 x 240GB SSDs. More flexible. Better SSD design - slightly. Adds $140 to the price, even if you had to wait to get 3rd one;
    #3  get 2 x 240GB for scratch and projects and 1 x 120GB for system (if your system is less than 50GB)
    I doubt you will find the difference of the system on the Sonnet Tempo a deciding factor.
    The Sonnet Tempo Pro is for higher I/O RAID, both Tempo cards support 2 x SSDs (I have the cheaper one)
    http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/
    PS: You have Mountain Lion. Buy Carbon Copy Cloner and it will clone the system and create the recovery volume also so you should not need to redownload 10.8.x - and you do not need the DVD with 10.6.4 again.

  • When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported.  Is this a bug in Mavericks?

    When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported. 
    This happens not just with the SSD in my Mac Mini, but with another SSD in my MacBook (both now running Mavericks).  So far as I know, all of the kit I am using is in good order (despite the file corruption reports).  So I am beginning to wonder if it could be due to a bug in Mavericks?  Both SSD drives have been formatted to MacOS Extended (journaled) format.  Should I have used a different format, I wonder?
    Has anyone else encountered this issue?
    Does anyone have a solution?
    Or an explanation that might help my investigation of the issue?
    Thanks guys,

    I understand that the Corsair Force 3 is not one of the SSD drives that are supported on Apple Macs. 
    I did try downloading and using Trim Enabler, but the error message came up both when it was off and when it was on.
    I understand that not everyone thinks Trim Enabler is a good program, though there is a new version out now, so I may give it another try.

  • Zero Out Data on a SSD drive: Are my findings correct?

    "Note: With OS X Lion and an SSD drive, Secure Erase and Erasing Free Space are not available in Disk Utility. These options are not needed for an SSD drive because a standard erase makes it difficult to recover data from an SSD. For more security, consider turning on FileVault 2 encryption when you start using the SSD drive."
    http://support.apple.com/kb/HT3680
    Seems to hard to believe, as I've seen some of the top participants here clearly say that first your set a new partition, then erase Macintosh HD, then zero out data?

    Retired Engineer, do you have any references?  What I have read says otherwise. 
    Drive Wear & Tear
    What is your estimation of wear and tear on the flash by writing to 0's.  What percentage of the drives total usage has been "wasted"?  I thought even consumer drives where capable of 1000 - 10000 rewrites per cell, whereas enterprise SSDs are capable of over 100,000: http://www.computerworld.com/s/article/9112065/Solid_state_disk_lackluster_for_l aptops_PCs?taxonomyId=19&pageNumber=1&taxonomyName=Storage.
    "For one thing, it matters whether the SSD drive uses SLC or MLC memory. SLC generally endures up to 100,000 write cycles or writes per cell, while MLC can endure anywhere from 1,000 to 10,000 writes before it begins to fail, according to Fujitsu's Hagberg. For its part, Western Digital's laptop hard-disk drive boasts up to 600,000 write cycles."
    That's an old artcile too.  Slightly newer, in late 2008 Micron/Sun achieved SLC NAND chips capable of over 1,000,000 write cycles: http://investors.micron.com/releasedetail.cfm?ReleaseID=440650 .  I imagine things have gotten slightly better in the last 4 years.
    Data Wiping
    This paper (http://static.usenix.org/events/fast11/tech/full_papers/Wei.pdf) states, "In most cases, overwriting the entire disk twice was sufficient to sanitize the disk, regardless of the previous state of the drive."
    Going on however, "Overall, the results for overwriting are poor: while overwriting appears to be effective in some cases across a wide range of drives, it is clearly not universally reliable. It seems unlikely that an individual or organization expending the effort to sanitize a device would be satisfied with this level of performance."
    The best method I have found for wiping an SSD on a Mac is the (SAFE) Scramble and Finally Erase process as described in this UC San Diego research paper: http://cseweb.ucsd.edu/users/swanson/papers/TR-cs2011-0963-Safe.pdf.
    According to their paper, the effectiveness of the procedure is equiavlent to degaussing a magentic drive. Another tidbit, the SAFE technique is replicated by Sandforce controller when someone reformats the drive (as mentioned by Linc Davis above, however, I believe this is specific only to Sandforce controllers).
    References:
    http://www.schneier.com/blog/archives/2011/03/erasing_data_fr.html
    http://www.computerworld.com/s/article/9211519/Can_data_stored_on_an_SSD_be_secu red_
    http://arstechnica.com/security/2011/03/ask-ars-how-can-i-safely-erase-the-data- from-my-ssd-drive/
    http://static.usenix.org/events/fast11/tech/full_papers/Wei.pdf
    http://cseweb.ucsd.edu/users/swanson/papers/TR-cs2011-0963-Safe.pdf

  • My hard drive is fried.  I need to reinstall moutain lion to a new SSD drive.  How do I install without media?

    My hard drive fried.  I can't reinstall from the OSX utilities because it only shows the recovery partition.  I was thinking about adding an SSD drive.  But I dont know how to install OSX mountain lion without any media.  What are my choices?  What should I do?

    First, the recovery option is built in to OS X - not the disk. If you install the new drive without formatting it first or without having an OS on it, it will not work (at least as far as I know). Most drives need to be formatted and it needs to be Mac OS Extended (Journaled) and use the GUID Partition Scheme.
    You said that your hard drive is fried but that you can access the recovery? The Command + Option + R is the internet recovery which means it accesses Apple's servers and a limited number of things including disk utility. I've not dealt with this type of problems, so I'm not sure, but If you can access that and you have your new drive in an external enclosure and attached, then you may be able to use Disk Utility on the recovery to format your new drive and then choose to install the OS directly on it.
    The second possibility - and, according to the following article, this should work directly (I've not tried it, so I can't guarantee it will):
    http://support.apple.com/kb/HT4718
    The easiest way would be to attach the new drive in an enclosure and use your internal's disk utility to format and then clone the entire thing to it, but that does not appear to be an option. Unless...... do you have a bootable clone backup or a Time Machine backup?

  • Can i install a 32gb msata ssd drive on my hp envy 6 1002tx laptop?

    can i install a 32gb msata ssd drive on my hp envy 6 1002tx laptop?
    Is their any msata port in my laptop motherboard?
    is their any problem by installing msata in my laptop?

    Hi,
    Please check the following documnet to find down a slot on the system board because this is an option:
       http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03282148/c03282148.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Is there a way to retrofit thunderbolt to a late 2009/early 2010 27" iMac. Alternatively, can a SSD drive be installed in place of the standard HD

    My internal macintosh HD died and I want to use an SSD drive if possible. I either want to replace the internal HD or boot to an external SSD drive if possible. I would have to connect with FW800 since I am lacking thunderbolt on my iMac. Would FW800 allow my the benefits of an external SSD?
    Thanks
    Jim

    No, on both counts. FW800 will not support the speed of SSDs. It barely supports the speed of very fast hard drives. But it beats USB 2.0.

Maybe you are looking for