SSD drive will not connect using USB adapter

Hello- I am having a problem with my CT250BX100SDI drive. It was fully functional in a laptop that I retired. I removed it and plan to use it as a external USB
drive for backups.However I cannot reliably connect to it.I have tried a Win 8.1 laptop, Ubuntu 14.04 desktop, and two different USB 2 adapters with no connectivity.On a Win 7 machine I get occasional connectivity.What may be the issue here?Any help is appreciated. Thanks Dan

HI KC2STA,
I am sorry for the issues that you have experienced with your SSD. At this point it would probably be best for you to call us directly, so that we can troubleshoot further. Our contact information can be found in my signature.

Similar Messages

TS3274 How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.

How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.

http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks
You should find a solution here

My flash drive will not connect to my Mac. what should I do?

My flash drive will not connect to my Mac. What should I do, and how should I fix this?

I could not save the data in time, so i just had to deleat every thing on the flash drive.

HP Officejet Pro 8500A 910A, Vista 32-bit, will not connect via usb to my PC!!!

I used to have this all in one connected to my pc, until I was experiencing a few printing issues, so I decided to uninstall it! When I tried to reinstall it, the pc will not connect it. I have tried different ports and have replaced the cable, also downloaded the latest software and drivers all to no avail. I can connect wirelessly to my laptop, but unfortunately this isn't a solution for my desktop as it's not wireless, therefore it has to be connected via usb. At my wits end, please help me!!!!!
This question was solved.
View Solution.

Hello,
Can you try inserting a flash drive into one of the USB ports in the printer, to make sure it reads it?
The port on the printer might be what's giving you the issue. Also, can you try connecting the printer USB to a different PC?
Let me know the outcome.

My itunes will not connect using at&t communications manager and internet

my itunes and store will not connect to internet using at&t communications manager

That's usually caused by a conflict between iTunes and the Bytemobile LSP inserted by the AT&T communication manager, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

Droid will not connect with USB to Windows 7?

Hello Everyone,
I recently upgraded to a RAZR M and can not connect to my PC with the USB cable. I have tried cable that came with phone and others and get the same message that USB driver did not install correctly. The phone did an update of the operating system less than a week after getting it so I am not sure what is up.
Also tried the MTP and PTP settings to see if that made any difference without help. I know my last phone had a setting for mass storage USB and I do not see that on the Droid.
Anyone else have this problem and been able to fix it?

Not an answer for you, yet I had this issue on my new Razr HD. The SD card was sort of accessible, I could transfer one file and then the directory info and transfer would get all goofy... However, on the HD there is an option for mass storage. It just needs to be set. Refer to the manual. Out of the box mine was set for MTP. Once it is set to mass storage it is not accessible by the phone (to find the stuff you transferred as mass storage) until you go back to the same menu and set it back to MTP.
Message was edited

Ipad will not connect using facetime

I have tried everything that I can find in these posts. I can facetime from my iphone, but not my ipad. Please help.

I tried using an existing gmail address and an old but working sbcglboal.net address and in each case it still say's it can't connect and in both cases the iPad, when attempting to enter either of the two additional email addresses says "Verifying" but the verification never seems to take place. In any case, I tried changing my Email address for video calls in the FaceTime section and it will not let me delete the mac.com email address which is my basic address for all email. Does the cloud have anything to do with it?
Thanks for timely support and help. We Will Get There.

External Hard Drive will not mount through USB Hub.

The Hard Drives are ok. If I plug them directly into my iMac (3 weeks old and update to 10.7.1) they mount fine. But they wont show up if I plug them into my USB Hub that is plugged into my iMac. I have had THREE USB Hubs and all of them have had problems. I have USB flash drive that sometimes shows up and a iPhone that will show up in iTunes when I mount it through the hub.
Is there a program (in the system or share/freeware) that will force the Mac to scan and mount them?
thanks - Otto.

The issue is the EHD's are not getting enough power. Going forward never buy EHD's unless they have their own power supply. I would recommend either connecting directly to the iMac or replacing them with higher quality devices. The EHD's I like to recommend are:
OWC Mercury Elite Pro series
LaCie d2 Quadra series
G-Tech G-DRIVE series
All are similar in quality and features. Yes they're probably more money that what you paid however they're worth it. I use the LaCie's however I wouldn't hesitate to use the OWC or G-Tech's either.

My iPod will not connect to the iMac via USB.

I can no longer charge nor sync my ipod because it will not connect via USB. What can I do to fix this?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

When i try to connect my iPhone 4S into iTunes through wifi or USB it will not connect the other thing is when i hook up my iPad into iTunes it will connect through wifi but not USB? Now is this a issue with my iPad and iPhone or is this iTunes?

When i bought my iPhone and my iPad they both were on iOS 7.0.2 i updated them shortly after thinking the new iOS 7.0.4 was better. i see its not but they both worked great with iTunes before and after the update. My question is why is my iPhone not connecting to iTunes? it will not connect through USB or wifi and i know that the setting to do that is turned on. my iPad connects through iTunes through wifi but not USB. This isnt making any sense but i wanna know is this a iTunes issue? or is it my phone and iPad??

This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock

RV180 router will not connect to ISP using PPPoE

I had the same problem. The RV180W would not connect to an AT&T DSL connection using PPPoE (modem in bridge mode), or behind the DSL Modem/router with the DSL modem/router providing a dynamic IP to the RV180W or a cable modem (TimeWarner Roadrunner dynamic IP). I upgraded the firmware yesterday and now the RV180W will connect to a dynamic WAN IP, but it still will not connect using PPPoE.
I have also noticed the admin interface is only accessible about 75% of the time. When going to 192.168.1.1 the login prompts either don't come up or if they do, after logging in, the screen never fully loads after that. I have to reboot the router to get it to work.
Also, the router has not yet pulled DNS from either the DSL or the cable modem. I had to manually enter those addresses.
Any suggestions on the PPPoE issue? Any thoughts as to why the admin interface is not always accessible or the DNS?
Thank you,
Ron

Hi Ron, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. About your login issue I recommend you to use different browsers such as Mozilla, i.e 9.0 or superior, Safari, Opera etc. About the PPPoE question, basically you just need the username and the password provided by your ISP. Can you please reach out to our Small Business Support Center and open a Service Request to address this issue? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link. http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it*
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Imac will not connect to Airport Extreme when configured WPA/WPA2

Imac will not connect to Airport Extreme when configured WPA/WPA2
Posted: Jul 5, 2007 8:22 PM Reply
I just got my Imac to connect to the internet using my Airport Extreme but only by using WEP. I had my Windows XP SP2 machines connecting using WPA/WPA2 with no problem. The Imac will not connect using anything other than WEP, and 1 of the XP machines will not connect using WEP.(I have not tried the other XP machines) I had to set the Airport Extreme for an open network in order to let both computers access the shared hard drive and access the internet.
I don't know what the problem might be and would appreciate any suggestions.
MacBookPro, Imac Mac OS X (10.3.9) Fujitsu tablet PC, 2 XP desktops

hehe...on the visuals. I figured it out already, and I have the old airport card. However, I did a chat with Apple support and while we were chatting I found a USB adapter with MAC drivers which will work. It is:
Hawking Technology HWUG1A Wireless-G USB Adapter with Removable Antenna for Macintosh
Manufacturer Part# HWUG1A
That is the only adapter that actually does WPA/WPA2 that I can find that is for a Mac and not just an older USB that only does WEP. It surprises me that Apple does not have a USB product like this. Anyway, for $56 including shipping, I will have it by Monday or Tuesday. Pretty cool.
Thank you so much for your assistance. It is appreciated.
Lynn

Advanced-N 6200 in T510 will not connect 802.11n

I have just received my T510 with the 6200 wireless adaptor. This adaptor will not connect using wireless-n, only wireless-g. I am running Windows 7, 64 bit. Other devices that I have are connecting using wireless-n to the same router.
The driver is the latest (13.3.0.24) and 802.11n mode is shown as "Enabled". There does not seem to be a choice for wireless-n in the "Wireless Mode" selection list.
Is it possible to get this to work with wireless-n? If so, any help would be appreciated.

gws wrote:
Other devices that I have are connecting using wireless-n to the same router.
This is a well known problem with 802.1n kit, that unfortunately many of the WiFi kit vendors are genrally reluctant to warn users about.
The Intel 6300 WiFi card is fully 802.11n compliant, so it is not the issue. Basically that means it should (and will) only connect in 802.11n in the 5GHz band WiFi band on its default settings.
It will also generally connect in a "Super-G" like mode (about 130Mbps raw link speed) in the 2.4Ghz band to a router than offers 802.11n connectivity solely on the 2.4GHz WiFi band, but this is not a fully specified mode of operation.
From draft 2 of the 802.11n spec onwards, the use of 40Mhz bonded chanels in the 2.4GHz WiFi band has been strongly discouraged, as it is generally anti-social in areas with a lot of 2.4GHz WiFi networks operating concurrently.
Your other devices may be operating on the now long out of date initial 802.11n spec, which permitted 40Mhz bonded channel operation in the 2.4Ghz WifI band.... before wide-spread practical field use indicated how disasterous it was for many existing 802.11b and 802.11g WiFi users.
Essentially, you need to get a dual band router that supports 802.11n operation in the 5GHz Wi Fi band (which by the way is actually around 5.8GHz).
Cheers,
Bill
I don't work for Lenovo

HT5299 I have a Gdrive mini and 2 LaCie hard drives that connect fine using USB. Thunderbolt to fire wire 800 adaptor will not connect to either my MAC air or LaCie drives. Help

I have a G drive mini and 2 LaCie hard drives that connect fine using USB. Thunderbolt to fire wire 800 adaptor will not connect to either my iMAC or Mac air or LaCie drives. Help

Have you tried any of these soundcards designed for 2.0?
The 3.0 port is categorically designed to be comoatible with all 2.0 devices. The port itself will adapt to the usage parameters of the device.
But if you really want to downgrade, then simply plug any 2.0 hub into a MBA 3.0 port. The ports on the hub will be 2.0.

This an IPOD I bought used. Everything else works fine. It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. Any ideas?

This an IPOD I bought used. Everything else works fine. It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. I should say it connects but then immediately disconnects. Any ideas?

Then my last suggestion is to Reset it, while connected to the BMW Audio.
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

SSD drive will not connect using USB adapter

Similar Messages

Maybe you are looking for