SSD Firmware update fails

In my T61p [6457-BQG, BIOS 2.29] I have the Lenovo version of a Samsung 830 SSD [MZ7PC256HAFU-000L7]. It is recognised by the firmware update program [fwss29.iso] and I am offered the chance to update from CXM72L1Q to CXM75L1Q. But when I try to run the update process I get a big red error box with UPDATE FAILED. I removed the HD password before trying the upate.
Any ideas?

Hello,
Have you tried changing the SATA drive access mode from AHCI/RAID/SATA (name might vary) to Classic/Legacy (again, name might vary) and then performing the firmware updateon the SSD?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

X230 SSD Firmware Update help

Hello,
We are currently having some issues with waking up a X230-2324CTO from a sleep. When awoken from sleep it is unable to open any programs. Programs for example an icon on the taskbar will glow up like if you would normally open a program but then will return to a normal icon like suggesting it was never pressed and no program will open.
Our hope is that the solution is a SSD Firmware update. The have the system updated with every update available for the X230-2324CTO using System Update but this one remains.
Tho we can't figure out how to do this SSD Firmware Update. We don't have a CD drive in this model and when using an USB external disk drive (Samsung) we are unable to boot to the CD.
The question now is can someone provide us with a very clear step by step manual in how to create such a CD the documentation with the update FWSS31 is very poor to say the least. What do we need to create such a CD and how do we need to do it.
Thanks for the support

We are using a Lenovo preload of Windows 8 Pro 64 bit. We currently have 5 Lenovo X230 2324CTO laptops and all of these laptops have the same problems.
One of these problems is that when coming into the office and they put there laptop into the Lenovo dockingstations and power up the laptop that when logged in the OS no program is able to load. There sometimes is a delay in this problem that for example they are able to open Outlook or a website but then no program is able to load. As I described earlier the animation for opening a program will occur on the bar but it will quickly just fade away. Also shutting the laptop off is not possible. It is possible to open the charm bar in Windows 8 and go to the shutdown option but on clicking the computer does nothing.
Another problem is that the user is stuck on the login screen of Windows 8 simply saying Welcome with a loading circle which never stops.
Only a forced shutdown (holding the power button for aprox 10 seconds) and restarting the laptop will make the laptop work again when either of these problems occur. These problems occur on random days. As I'm in the IT Team I know when a problem occurs and it can vary to a few days, every day or a few weeks even before it starts to show up again.
I also checked the users and there behaviour in using the laptop but I cannot find any strange behaviour at all. As i also stated before we are running on every update that Lenovo System Update 5 can trow at us. I also installed Intel Rapid Storage Technology the newest version in hopes of fixing some of the problems.
Thanks for the support.

Intel SSD Firmware Update Tool ISO does not boot

Hello everyone
Yesterday I tried to install Mavericks on my MacBook Pro 13" 8,1 but I got stuck because I have an Intel SSD inside and it seems that MacOSX 10.8 doesn't have the right driver on board. So I downloaded the Intel SSD Firmware Update Tool 2.0.6 ISO, burned it on a CD with DiscUtility and tried to boot from it.
The problem is that it doesn't boot from the CD. It just ends with the blinking/flashing question mark folder.
Luckily I have a second MacBook Pro 13" 8,1 from work. Just out of couriosity I inserted the disk inside this MacBook and tried to boot from it.
Everything went fine. I saw the Intel Firmware Updater etc.
So now my question: What is going on with my first mac? Why does it NOT boot the CD?
What I need to say at this point: I burned the CD with the MacBook from work. Could this be the reason?
hope someone can help me
Best Regards
krebbl

yes that's right. Unfortunatly I don't have a Windows PC.
But like I said, my second MacBook Pro boots from this CD and shows me the firmware updater. My first MacBook with the Intel SSD does not.
And like in the post here http://reviews.cnet.com/8301-13727_7-57575091-263/intel-x25-ssd-incompatible-wit h-os-x-10.8.3/ it should be no problem.
Are there other ways to boot an ISO file?

Zen Micro - firmware update failed so now "dead"

I have a firmware problem with my Zen Micro. Can anyone help?
The series of actions I have taken so far are these:
I got my Micro in January 2006. I now want to run Audible software to listen to their books so I downloaded the firmware update L6_2_2_02.exe from the Creative support site which is stated as providing the Audible?facility.
I backed up the Micro contents using Creative MeadiaSource Organiser. I then ran the firmware update from my Win XP PC. This started OK and I got a series of messages about what was happening. Then it stopped with the progress indicator bars about 2/3 across. I left it for half an hour and nothing changed so clicked to stop the update.
I checked the firmware version on the Micro and it said 2.2.02. The update?looked OK and the FM worked but of course I had no music content.
I opened my Creative MeadiaSource Organiser (v 3.0.09) but it said no device is connected so I was unable to reload the music. My XP PC recognised the Micro as connected and I checked Device Manager which showed the "device is working properly". I was also able to synch music to the Micro using Windows Media Player and this played OK. I tried another computer and could also synch using Windows Media Player but I wanted to reload my music from the backup.
I looked on the Creative site for the steps to take when a firmware update fails. The Zen Micro is not on the list as supporting the MP3 Player Recovery Tool so I did not use that. I followed the Reload Failure recovery instructions and ran Clean UP, then Format All, but this did not fix it so I ran Reload Firmware on the Micro. This was a big mistake!
Now when I try to run the firmware update from my Win XP PC, I select English then I get the message "Your player is not connected, please connect your player". I checked again and XP still recognises the Micro and the device is working. It is no longer recognised by Windows Media Player but just? appears to XP as an empty storage device.
The Micro now shows the firmware as v 0.0.65, but now it is stuck in Recovery Mode. I have contacted Creative Support but their reply is that this player is now over 3 years old, reached its end of service life, so there is no support other than on their web site. Following their web site recovery instructions got me into this mess so I guess?no extra help is offered from Creative.
The player is now essentially dead. Unless there is some way to get the firmware update program to recognise the device as connected, then I don't know how to fix this. This is a shame as it is a nice little player for my music collection.
Can anyone help as I don't know what to do next?

I have the same problem. I put the screenshots below and the errors that happen to me.I can not put him the firmware because I do not recognize the device.
Both windows xp windows 7 as the
DISPOSITIVO, IMAGEN ACTUAL
http://img528.imageshack.us/img528/3783/dsc0025mv.jpg
EL PORTATIL LO RECONOCE
http://img811.imageshack.us/img811/4323/dsc0026ox.jpg
MUESTRA BATERIA, PULSANDO BOTON DERECHO
http://img546.imageshack.us/img546/4855/dsc0027wj.jpg
ADMINISTRADOR DE DISPOSITIVOS
http://img801.imageshack.us/img801/4501/dsc0028une.jpg
ERROR AL INSTALAR CREATIVE SOURCE
http://img805.imageshack.us/img805/3061/dsc0029io.jpg
http://img208.imageshack.us/img208/9330/dsc0031sn.jpg
http://img545.imageshack.us/img545/7096/dsc0032qg.jpg
MP3 PLAYER RECOVERY TOOL, no me reconoce Creative ZEN MICRO como conectado
http://img528.imageshack.us/img528/1714/dsc0030qn.jpg
PROGRAMAS DESCARGADOS (pagina oficial creative)
http://img341.imageshack.us/img341/2466/dsc0033oi.jpg
DSC_0025.jpg
I need your help. I'm desperate. Uninstall Windows Media Player.
Thanks in advance

Firmware update failed - how to resolve remotely

I bought my father an Apple TV so he could subscribe and watch MLB. Everything was working fine until the Apple TV attempted to update itself. Apparently the firmware update failed. I need to know how to remotely resolve this for him. I can access his PC remotely so I read some info that you can update Apple TV via iTunes. I also need to confirm that the USB socket on the Apple TV is a USB Mini type. I'm assuming you can just plug the Apple TV into a USB socket and then from iTunes initiate the firmware update, much like you do an iPad. He's not very technically savvy, so I need to do this for him or have him call Apple support.
Any suggestions or help is appreciated.

If he hasn't done so get him to do the old fashioned trick of unplugging teh mains power to it and restarting.
If it restarts correctly the update can be reattempted.
If it's truly bricked then return to Apple or restore using itunes will be necessary.

Multiple identical SSD firmware updates

Helllo,
My system is updating anormally the SSD firmware.
Already 4 times "MacBook Air Flash Storage Firmware Update" in version 1.0.
The SSD is a Toshiba (TS128E) on a MacBook Air 2012 running Moutain Lion.

There is a long thread on the mid 2012 toshiba SSDs failing. Some have pointed to this firmare update as a possible cause.
I would take the system to Apple and have them check it out. Make sure you have a recent backup because the SSD could fail at any time.

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

Why is the 2012 imac firmware update failing on 27" imacs?

Any oideas why the new firmware updfate fails on the 27" imacs (2012) The site says it is for ALL 2012 imacs???
http://support.apple.com/kb/DL1618

Copied from this link today:
http://support.apple.com/kb/DL1618
About iMac EFI Update 2.0
This update is recommended for the iMac (21.5-inch, Late 2012).
This update contains general performance fixes pertaining to sleep and Thunderbolt, and improves compatibility when using the 5GHz band in Wi-Fi.
Boot ROM or SMC Version Information: After Update is complete:
Build version: 010A.05
ROM version: IM131.88Z.010A.B05.1211151146

SSD Firmware update - do I need to move boot SSD to Bay 1?

Hello there
I know you can specify which disk to use as your Startup in System Preferences - currently I am using a Crucial M4 SSD as my boot in the lower optical bay of my Mac Pro (Quad-Core xeon).
But if I want to update the firmware on the SSD do I need to move it? The updating process involves booting from a CD with the firmware update on, as you may know. But does that process override the system preference? Presumably Bay 1 is the default boot system drive, in this instance?
Thanks in advance.

msphoto wrote:
So there's potentially no need to remove the other drives, as Hatter has suggested?
I've actually got 2 M4s installed, only one as a boot. If anyone know the best way, thanks for the advice. I'll head to the M4 forum as well.
By coincidence I happend to do a firmware update of my mac pro 5,1 OWC ssd just this past weekend. It's true that is shouldn't matter which bay the drive is in nor whether you have hdd's in the other bays, but even I was paranoid enough to pull the other drives before booting the firmware updater (it was a Linux boot by the way). "Pulling the drives" really was no more than sliding them back about an inch and not totally removing them -- just enough to unplug them. You can run with the mac pro cover off with no problems.

HELP! Firmware update failed, need to extract data from unreadable iPod

Please HELP! I have important data on my iPod that I need to preserve. Here's what I did:
* downloaded newest iPod software and used the iPod Updater. It assured me the the "Update" process does not touch songs/data on my iPod
* clicked the Update button. The update failed, citing error writting data to disk.
* now my iPod will not boot up (folder icon), on top of that it will not mount even in Disk Mode (claims it's unformatted).
* iPod Updater now offers only the Restore option
I absolutelly NEED to get the data of my iPod if I am to restore it. The data should still be on the disk (even if the firmware is damadged), it's just a matter of gaining access to it.
Any chances?
iPod video Windows XP

Good luck.
Sounds like a problem I had with a camera card - and I lost the pictures, and I have yet to restore the camera card - it's still dead, won't even format.
Take it someplace where they specialize in data recovery - for high fees....

P1102w firmware update failed

Hello.
I was trying to update the firmware for HP P1102w, and it seemed to be failed. After waiting for a long time, it ended up with the error message, "restart the power cycle and try again" or something like that.
After that, it did not appear in my network, and I lost the web interface and print capability. My rounter does not show its presence. The printer has solid purple lights on WiFi and triangle light.
I tried to way to do factory reset, but I could not find it.
I understand that firmware failed is critical. Does anybody know how to fix it?
Thank you very much.
This question was solved.
View Solution.

Hi ttanemori,
Please connect the printer to your computer via USB cable, and then re-run the firmware update.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

2.28 Firmware Update Failed

I have tried twice to manually install the 2.23-2.28 Firmware update for the MIFI 4510L and both times got the message"403 software failed. Any advice or help would be appreciated

The simple answer is to try the update from another computer, preferrably a Windows computer.
Its also a viable option to bring the MiFi into a VZW store and have them perform the update for you. That way if your MiFi is bricked they can replace it for you on the spot instead of having to wait for one in the mail.
There may be other tricks and tips in this thread:
https://community.verizonwireless.com/thread/770671

Firmware update failed hdd not recognizing now

my 1tb mypassport was working perfectly fine untill i tried to upgrade firmware. it failed and now hdd is nor being recognized. no ticking sound. lifht turns on windows vive usb conection sound but nothing appears no error or driveplz help me.i have very iortanr data on itthanks

The drive is probably bricked. I only do the firmware updates if there is a problem with the drive or a security issue. Sometimes if it ain't broke don't fix it is the best policy!Joe

New Bluetooth Apple Keyboard - Bluetooth Firmware Updater fails

Hello,
I want to be able to use bluetooth to wake my MacBook Pro, I am told by the instructions I need to use the Firmware Updater, so I installed that off the CD provided but when I launch Bluetooth Firmware Updater and click update, I get this error:
Missing Firmware
This version of the updater is missing the firmware file. Cannot proceed.
Can anybody help me with this? I'm not sure how to proceed from here.

Hello,
I have checked the settings and they are correct but it is still not waking up properly - watching the light on the front it does look like it is trying, as it stops pulsating and goes solid but it doesn't wake up, I don't get anything displaying on the external monitor nor can I use the remote to start playing iTunes.
I wonder if this is a different problem, not just the keyboard failing to wake it up?
- Dan

Zen Micro Photo Firmware 'Update Fail

Ive tried several things, several computers. The Zen will only boot to the firmware screen if not docked. If Docked the Zen can update but at the end, it will always say, 'Update Failed!'?I was wondering if this is the Motherboard, or the Hard-dri've. I dont hear any clicks or sounds from the hard dri've.

This all started a few days ago, the Zen was playing a nice track and then it turned off, I turned it back on thinking wtf. It came on, played for about sec then said, 'Overheating Shutting Down'?so I tried a few more times and it said the same thing, it was rather Cold outside, wierd. I went home, let it stay infront of a fan for a few hours and thats when it wouldnt even boot after that. Then I couldnt recharge the battery for some odd reason, and the update didnt want to install, So i had my old BROKEN ZEN MICRO which has the same EXACT PROBLEM, anyways, I took that battery and used it cause it charged unlike the ZEN MICRO PHOTO Battery. After that, then I installed the update, but then it gave me that problem of Update failed, so here i am now...

SSD Firmware update fails

Similar Messages

Maybe you are looking for