SSD for macbook pro late 2011

Hello,
I need some help about SSD drives. I have read a lot but I don't understand much and decided to ask someone know better than me. My Macbook Pro is late 2011 i5 8gb ram and want to change its hard drive with SSD 256gb. I need advice about brands. For example is this okay 256GB Ultra Plus SATA 3.0 SSD? Or which SSD should I prefer?
Thanks a lot.
Selim Cavusoglu

Hey Selim,
I've installed many different brands of SSD's as well as different tier options for the same brand of SSD. In my experience, regardless of the brand the boot time will be right there next to each other between the 13-16 seconds range. Now if you want the best bang for your buck the simplest answer is go to amazon and buy a samsung 840 pro or samsung 840 evo. The performance is very similar and the price of the pro is a little higher since it will last longer due to it being a MLC SSD vs the EVO which is a TLC SSD. So if that answered your question there you go keep reading if you want:)
Between the two, i picked a used (by amazons standards, it had just had damage to the packaging) 840 EVO and it was about the same price as what you have shown an example. Now, buying used from amazon is hit or miss, so i recommend spending the extra $10-$20 for peace of mind. There is also cheaper options, but samsung seems to have the BEST track record with reliability AND performance. Keep in mind the 50MB differences in read speeds you see on benchmarks actually aren't very noticeable in launching apps.
Hope I've helped, If you would prefer a different option from the recommended samsung 840 evo let me know and ill gladly give a few more options.
-Noahwhite2014

Similar Messages

INSTALL SSD IN MACBOOK PRO LATE 2011

I have a late 2011 MacBook Pro 15". I would like to upgrade the 5400rpm hardrive for a fast SSD. Is it easy to do yourself or should I get this done in a store?

Sorry - this one slipped past me...
It's easy to DIY. I put a 512GB Crucial m4 into my 15" late 2011 MacBook Pro last April. There are hundreds of videos on YouTube on how to install the drive.
First, decide on which drive you want - there's a good info and buyer's guide here. Although much of the discussion is about drives for Windows machines, most buying advice is good for Mac's, too. You'll also want to get yourself a toolkit and an external enclosure for your old drive - I got both from OWC.
After you have the drive installed, follow the directions here to format the SSD and clone the 'old' drive to your new SSD.
Any questions? Yell back...
Clinton

Best upgrades for MacBook Pro Late 2011

Hello, searching in the community, only brings me to posts that are from 2012, as newer tech is available, I would like to renew the question and hopefully get some updated comments and suggestions.
I own a MacBook Pro 15 late 2011 (2,2GHz Intel Core i7, 4GB 1333 MHz DDR3, matte retina display, Intel HD Graphics 3000 384 MB, OS X 10.9.5 13F34).
I would like to upgrade to Mavericks and while I'm at it, I'll upgrade the hardware as well (HD and RAM).
I'm a photographer, and I noticed that Lightroom and PS are running slower as I upgraded through the OSs, this is the main reason for my need to upgrade, I would like more speed overall. There are so many choices of SSDs and RAMs on the net, I would love to get some good feedback from this post and maybe boil this down to three upgrade possibilities:
1 The BEST (meaning the top of the line and probably most expensive)
2 The MID (good compromise between price and performance)
3 The CHEAP (the least expensive choice to make the computer increase performance)
I really appreciate all the help I can get from the Community.
Marco Benvenuto
P.S.
If by any chance I missed a post that already answered my question, please link it to this one ;-)

I just bought the Crucial M550 CT512M550SSD1!!! Thank you so much for your help
If I could still pick your brain with another question...
I also have a Mac Pro 2 x 2,26 GHz Quad-Core Intel Xeon, 6 GB 1066 MHz DDR3 ECC, NVIDIA GeForce GT 120 512 MB, OS X 10.9.5 (13F34)
Since there are fast PCI slots available, I was looking to put an SSD in there, but I noticed that the price difference is substantially higher.
I wont need more than 240/256 GB for the MacPro, since I have 2 2TB HDs and some others in there.
My question is: is the performance of the PCI SSDs compared to the regular SDD worth the up-upgrade?
Or should I just get another Crucial M550 (256GB) and put it in the second DVD bay?
I'm thinking to put the RAM on hold for both computers for now, but I probably will get Crucial for both a.s.a.p.

Compatible Monitor for MacBook Pro late 2011

Hello, I would like to purchase a monitor to use with my MacBook Pro "Core i7" 2.2 15" Late 2011
I found some cheap models from Dell but I'm not exactly sure what specs to look for in order to have a fully compatible monitor.
Could you eventually help me?
Thank you in advance
MacBook Pro's Technical Specs (from http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.2- 15-late-2011-unibody-thunderbolt-specs.html)
Connectivity includes AirPort Extreme (802.11a/b/g/n), Bluetooth 2.1+EDR, Gigabit Ethernet, a Firewire "800" port, two USB 2.0 ports, separate audio in and out ports, an SDXC card slot, and a "Thunderbolt" port that is backwards compatible with Mini DisplayPort and, likewise, supports an external display at 2560x1600 and passes an audio signal. Thunderbolt also supports other peripherals that use the Thunderbolt standard which provides up to 10 Gbps of bandwidth in both directions.

I've never seen a monitor that requires drivers to be installed. Maybe that's why you can't find any. All, at least that I know of will work with any computer. But I may just not be aware of any that won't/don't work with your Macbook Pro.

Best portable hard drive for MacBook Pro late 2011

Looking for a portable hard drive, 1TB USB 2.0 I think. I googled the model details below and it said it had USB 2.0
EtreCheck version: 1.9.12 (48)
Report generated 2 August 2014 10:06:17 BST
Hardware Information:
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Have never backed up before and not too bothered about it being super fast. Would like to get one for under £50. Tried looking myself but getting very confused, USB, FireWire ????
Can anyone help?

USB 3 hard drives will work with your MacBook but only at USB 2 speeds. FireWire 800 is your best option for fast data transfers at this point, unless you want to get a new computer.
Best of luck.

Second graphics card (Nvidia) for Macbook Pro (late 2011)?

Hi,
I have a late 2011 17-inch Macbook Pro, and want to know whether it's possible to fit a second graphics card in there - and if so, where I could find a list of compatible cards.
What I am really aiming for is an Nvidia card with CUDA, since there are various applications I want to use that require CUDA.
If it's not possible to fit a second CUDA card in there, is it possible to replace the current card (AMD Radeon HD 6770M 1024 MB) with an Nvidia one?
Thanks,
S

Thanks for such a quick response, albeit not the one I was hoping to hear!

Best SSD for Macbook Pro Early 2011?

It seems the top two contenders are Samsung 840 Pro and Crucial M500. From a real world perspective, would I even notice the difference between the two as far a speed goes (or any other ones for that matter). i guess I am just curious if anyone has found other SSD drives that work nicely with the macbook pro, with or without trim enabled. I know the 840 EVO has issues for whatever reason. What about the Seagate 600 which does not use Sandforce or Marvell, or other Marvell drives like Sandisk Extreme II or Plextor M5 pro xtreme?
Also, if you could had how long they have lasted and comment on whether there has been any degradation in quality, that would be helpful as well. Things such as temperature and battery life would be helpful as well. Most review sites are so focused on Windows, it makes it hard to know.
I've already upgraded my RAM with the Crucial 16gb package and that is working well, and I am just looking to do the one other upgrade that will make this laptop viable for a few more years.

JasonB824,
I went with the Samsung 840 PRO (with TRIM enabled) for my Mid 2010 MacBook Pro. I haven’t had it for very long, and it’s nowhere near full, so I can’t comment on its long term behavior. I haven’t observed any quality degradation yet, and it does come with a five-year warranty, so it should last a while. I almost always run my MacBook Pro plugged in, so I can’t comment on differences in battery duration between charges. (Hmmm, why did I reply? ) My MacBook Pro only supports SATA II, but since yours supports SATA III, you should see the full performance characteristics of whichever SATA III SSD you choose. Unless you’re engaged in heavy-duty disk-bound use, you’ll be unlikely to notice speed differences between your top contenders.

Install SSD in macbook pro late 2011 15'

Hello,
     I just want to make sure i have the steps right for installing my SSD. I am trying to avoid cloning because my current HDD is faulty which is why i'm replacing it. I have a time machine backed up on an external hard drive. So as far as i know i just need to
          1) Remove HDD and replace with SSD
          2) Boot the recovery drive
          3) Recover time machine
I am just confused with step 2. I thought the recovery drive was just a partition of the HDD so it should not show up with the SSD in. Or is it seperate?

Allow me to make things straight forward.
Install the SSD.
Install OS X Using Internet Recovery
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
Before rebooting OS X for the first time connect your Time Machine backup drive. Boot the computer and when you are asked if you want to transfer files now use the Setup Assistant to transfer your Home folder, third-party apps and support files, and system preferences from your Time Machine backup to the SSD.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
MacBook Pro:
Vendor Name:    Apple, Inc.
Device Name:    MacBook Pro
UID:    0x0001000A17016E60
Firmware Version:    22,1
Port:
Status:    No devices connected
Link Status:    7
Port Micro Firmware Version:    FFFF.FF.FF

You are correct, here is what Apple Says:
http://support.apple.com/kb/TS3775
I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

Have you looked on Lexmark's support site?
http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

16GB HYNIX for my MacBook Pro late 2011

It is taking me so long to find a 16GB memory by hynix (8X2) to install in my Macbook Pro late 2011 . 2.4 GHz Intel Core i7 . 1333MHz DDR3 .
Need a to upgrade and i think that i need a 204PINN SODIMM
DDR#-PC3-10600 .cl9 Unbeffered.NON - ECC 1.35V.1024MegX64.
Please correct me if I am wrong . And if you can assist me where to get it Or maybe SAMSUNG Memory .,Either one is Good but do not Prefere ather kinds.
Best regards to all.
Sam

I actually prefer Crucial - I have the same model as you, but I've 16GB of Corsair in my machine. Had I to do it over again, I'd buy Crucial (particulary now that the prices have come down).
Go to the Crucial website and use the System Scanner tab - it will let you know your upgrade options. Your machine, like mine, uses 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMMs. I don't know a thing about Hynix, but Samsung is good as well - I just prefer dealing with Mac specialists.
Clinton

Both Internal hard drives fail on Macbook Pro late-2011

Both internal hard drives (SSD and HDD) failed on Macbook Pro late-2011.
Setup: MBP closed with Thunderbolt display attached.
Problem on HDD-A
I called Apple Support to log an issue with my MBP2011. The system is made up of 2 drives - SSD (128GB) and HDD with 2 partitions HDD-A and HDD-B(original 750GB).
HDD-A has LionOSX 10.7 and HDD-B is storage. SSD has LionOSX on it as well. I normally boot HDD-A.
I was working on HDD-A and the Kernel Panic screen appeared prompting me to shutdown the machine and start it up again.
I tried to reboot HDD-A and the grey progress bar appeared for a long time. I then forced shutdown and rebooted into SSD.
I was able to boot from SSD and then I opened Disk Utility to check the drives. I verified the disk for HDD-A and there was an error. I then tried to repair disk and it couldn't repair it. A dialogue said the disk could not be repaired and that data should be backed up.
HDD-A was not visible in Finder but HDD-B was accessible.
I verified HDD-B and it was "ok".
I shutdown, booted from SSD, disk utility HDD-A and the same message occurred.
I called Apple Support and they advised that I boot from my external HDD which was a clone of HDD-A.
Solution
I was successfully able to boot from the Clone HDD-A.
HDD-A was able to be accessed and I could retrieve the files from HDD-A.
I copied over the latest files from HDD-A to an external drive.
Same Problem on SSD
Boot from SSD, i started working for about 3 hours, with the lid closed, and attached to the ACD.
Kernel Panic screen happened again on the SSD.
Couldn't boot boot from either SSD or HDD-A.
I booted from Cloned HDD-A, Disk Utility verify and repair returned errors on SSD. The same issue had occurred on the second drive.
Disk Recovery from a boot recovery USB thumb, Disk Utility, erased SSD, verify was ok.
Tried to install then there was an install error saying that SSD was damaged (large triangle warning icon). Tried 3 times, failed.
Boot from Recovery Drive HDD-A, downloaded LionOSX.
Next steps
Format HDD-A and HDD-B into 2 partitions
Install LionOSX on HDD A.
Note:
I did not do any software updates for about a week before 14.04.2012 and suspect it might be due to the virus.
I normally work with the lid closed and attached to the ACD, I also suspect that overheating caused both drives to fail. However, I have been using this system with the lid closed for atleast a week. One Kernel Panic screen occured.

Depending on what you are doing on the computer, how hard you are working the computer, it should not overheat. And if it does it should shut down or get very slow because when it starts to overheat the CPU will be throttled back to a lower Ghz speed and or just shut down so it doesn't cause damage to the CPU. The Kernel Panics are a sign that something else is going on. This could be software or hardware.
If after wiping the drives and reinstall Lion on the SSD if the system is running OK then the drives are fine, IE they are not bad. There is something else corrupting them. Again this could be hardware or software, but I doubt it is heat. And using the MBP ion clamshell mode should not cause overheating or excessive heating of either of the drives.
Have you installed iStat Pro or Menu and kept and eye on the temps? If not install iStat Pro and keep and eye on the temps. I bet they do not get above the 150°- 180°F mark which although hot is not overheating.
Be very careful when calling Apple. Removing the DVD drive and installing a hard drive in that bay could void your warranty. The DVD is not a User Removable part and Apple frowns on doing that. So if you call them do not mention that you have replaced the DVD drive with another HDD.
Honestly I suspect you have a hardware problem. But the only way to know that is to install just Lion and your basic programs and run the system. Leave out any AV type software, if you are running some. If you don't get any kernel panics thenn install some of your other software, one programm at a time. If with just the OS and basic software you get a kernel panic then it is hardware related and needs to be checked out by Apple. If you do that re-install the DVD and the original HDD with just the OS on it before you take it in.

MacBook Pro (Late 2011) Graphics Card issue; shall I keep it?

Hi there,
I've recently bought a MacBook Pro (Late 2011) second hand from someone on eBay, it's going to be delivered in a couple days.
Now, after the purchase, I did some research into the production year - I know, I should've done it before really - and found a huge amount of people with the very-known issue of the Graphics card. The issue causes massive visual problems and has, on many occasions, resulted in a replaced Logic Board.
I'd like to know whether you think that this machine is a safe one to keep, or if I should send it back and try and get one from a different year?
The seller said, once I asked him about it, that the previous owner (obviously someone has had it before him) apparently had a few issues, but he himself hasn't, and is using Mavericks.
What do you think?

Not ALL of the 15" and 17" models have had a problem with the soldering of the GPU - maybe 20,000 at the most (based on the information that I've been gathering and some of those may be reports on the same machine). It's possible that yours may be good one.
However... I wouldn't take the chance, were it me. I've only had my logic board replaced once and it's been almost 11 months now and my machine is still working. But I'm sure that the problem will surface again (after my AppleCare runs out in 2015!) so I've decided to become less Mac-dependent in the future.
If I were you, I would just tell the seller that you're not comfortable buying a 2011 model with the discrete GPUs (the 13" models are just fine) and would shop Apple's refurbished section, looking for a non-Retina 2012 model.
My opinion...
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

MacBook Pro late 2011 screen goes blank and needs shutdown and superdrive spins 3 times before ejecting discs

Hi everyone,
I have a big problem with my MacBook Pro late 2011, suddenly while working without connecting the charger and it is 100% charged the screen would go black and I would need to hold the power button to shut it down and then power it up again, The second issue is the superdrive whenever I use a disc it spins it for 3 times before ejecting it to me, tried resetting PRAM and tried re-installing mac os x mavericks, but no solution so far and about the superdrive I bought a cleaner disc and tried to insert it, the superdrive would spin it 3 times and ejects it after that. Saw the disk permission solution and tried it once and I think there is a problem with that because this is the second time I try it and it was saying that there were problems.
Sorry for being long.
Thanks in advance.

Depending on what you are doing on the computer, how hard you are working the computer, it should not overheat. And if it does it should shut down or get very slow because when it starts to overheat the CPU will be throttled back to a lower Ghz speed and or just shut down so it doesn't cause damage to the CPU. The Kernel Panics are a sign that something else is going on. This could be software or hardware.
If after wiping the drives and reinstall Lion on the SSD if the system is running OK then the drives are fine, IE they are not bad. There is something else corrupting them. Again this could be hardware or software, but I doubt it is heat. And using the MBP ion clamshell mode should not cause overheating or excessive heating of either of the drives.
Have you installed iStat Pro or Menu and kept and eye on the temps? If not install iStat Pro and keep and eye on the temps. I bet they do not get above the 150°- 180°F mark which although hot is not overheating.
Be very careful when calling Apple. Removing the DVD drive and installing a hard drive in that bay could void your warranty. The DVD is not a User Removable part and Apple frowns on doing that. So if you call them do not mention that you have replaced the DVD drive with another HDD.
Honestly I suspect you have a hardware problem. But the only way to know that is to install just Lion and your basic programs and run the system. Leave out any AV type software, if you are running some. If you don't get any kernel panics thenn install some of your other software, one programm at a time. If with just the OS and basic software you get a kernel panic then it is hardware related and needs to be checked out by Apple. If you do that re-install the DVD and the original HDD with just the OS on it before you take it in.

Osx 10.8.4 does not run macbook pro late 2011

does any have issues after installing osx 10.8.4??? because i have an issue after i update my macbook pro late 2011 ,it doesn't start and only stay on the mac logo and appears the pointer i restarted many times and does not work the only option i had is to reinstall the osx 10.8.3. can anybody help me with this issue?? thank you.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

SSD for macbook pro late 2011

Similar Messages

Maybe you are looking for