SSD not found

Got a new retail Intel SSD 330 120 GB for my laptop Probook 6560b, cloned the old one and installed in the laptop. The computer recognized its a new drive and installs some hardware.
Everything works good for about 4 hours. Then bluescreen, and the harddrive is not found, not even in BIOS. Back with the old harddrive and everything works. Replace again with the SSD, still not found. Back to the old again, booting and connecting the new SSD using a USB to SATA connector - and the SSD is found there. Just for checking back to the SSD in the laptop but still not found in BIOS.
Is there anything I can do to get the SSD to work as the main drive?

Hi:
That drive has issues.
See this long thread below.
http://communities.intel.com/thread/30043
You can read my second post on page 3 for how I got mine to work.
It has worked fine ever since.

Similar Messages

HDD or SSD not found on Envy dv7

Hello everyone, I recently had a 'broken' notebook HP Envy DV7-7350eb, which I recently installed a Win 7 pro x64 OS on.After installing some windows updates and all, windows wasn"t able to find a boot device anymore. It doesnt display the DVD drive to boot from when I press the F9 button, but seems to boot from it though..But the HDD won't display on the boot device selection. I've tried to adjust everything in the BIOS (legacy support on/off, secure boot on/off, boot from USB drive instead of win7 installation disc) I've looked up the HP support site for getting the latest BIOS update but can't seem to find a new BIOS update.. Anyone have more suggestions? or where I can download a BIOS update maybe? Thanks in advance to hopefully help me out here!

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_in...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 7 install stops at "CD/DVD driver not found"

When trying to install Windows 7 with boot camp, all goes well until it stops and gives me the "CD/DVD driver not found". I have a mid 2010 Mac Pro with a 500 GB SSD drive. I have burned a DVD at 1X from a iso file.
Thanks

Can you verify the MD5/SHA1 of the DVD with the ISO using OS X 'openssl md5' or the M$ FCIV tool? The source of your ISO should be able to provide MD5/SHA1.
OS X Example
openssl md5 ~/Desktop/GRMCPRXVOL_EN_DVD.cdr
MD5(/Users/MyName/Desktop/GRMCPRXVOL_EN_DVD.cdr)= 977f4f0f1400be91855789213e07b031
Windows FCIV example
D:\>C:\"Program Files (x86)"\FCIV\fciv
// File Checksum Integrity Verifier version 2.05.
Usage: fciv.exe [Commands] <Options>
Commands: ( Default -add )
        -add    <file | dir> : Compute hash and send to output (default screen).
                dir options:
                -r       : recursive.
                -type    : ex: -type *.exe.
                -exc file: list of directories that should not be computed.
                -wp      : Without full path name. ( Default store full path)
                -bp      : specify base path to remove from full path name
        -list            : List entries in the database.
        -v               : Verify hashes.
                         : Option: -bp basepath.
        -? -h -help      : Extended Help.
Options:
        -md5 | -sha1 | -both    : Specify hashtype, default md5.
        -xml db                 : Specify database format and name.
To display the MD5 hash of a file, type fciv.exe filename
D:\>C:\"Program Files (x86)"\FCIV\fciv -add Windows8.1-64bit.cdr
// File Checksum Integrity Verifier version 2.05.
f104b78019e86e74b149ae5e510f7be9 windows8.1-64bit.cdr

Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)

Hey
i am having this Error Message "Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)", While UEFI mode is enabled from bois but in Raid menu Both my hard Drives 1TB and SSD are Showing and I run the F2 System Diagnostics Test and it became as passed. In UEFI mode its not even showing my USB when i attach it for Window install But when i enabled the Leglacy mode it detteced my USB and also let me install my Windows and every thing seems to work fine. Updated the bios still Error is there.
Error Message only shows up when I disable the Leglacy mode.
So where is the Problem ? hard drive seems fine because these are working on Leglacy mode enabled.
Laptop Model : HP Envy Dv6-7211tx
Hard Drive : 1Tb and 32GB SSD

Hi Saifullay, sorry to hear that you are having issue with your Envy Dv6-7211tx. I have done some research and I have found a document that will assist you with this issues. Please click the link that I have provided to get to the document. http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443463
If this does not resolve the issue, please feel free to write back . I would like to also apologize for the delay and the inconvenience that you have had to deal with.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Can anyone answer why in logic pro X I keep getting a window popping up that says Directory not found, result code= -120, followed by another window saying, Fade update failed, (error -120)?

Can anyone answer, why in Logic Pro X I keep on getting a window popping up saying, Directory not found, result code = -120. Followed by another window saying, Fade update failed, (error -120)?
I am running the latest version 10.0.5 through a Macbook Pro that has just been upgraded to 16GB Ram and a 960GB SSD which has made it as fast as ****. I upgraded because I was experiencing problems before and it was suggested that I didn't have enough Ram?
I am using a Focusrite scarlett 2i4 and an Alesis Q61 midi controller. Weirdly, just trying to put a bass line down on a track using the Alesis, the bass sound goes out of tune with the track during recording only. This is very frustrating! I surely can't be the only one experiencing this?
Many thanks
Rob.

Hi
Time lost could be a problem, but.....
Sadly, I don't think that there are any Apple docs relating to networked storgae issues with Logic. Other than a 'school' or 'business' setup, NAS/OD/AD setups are not usual circumstances for audio.
If the issue is one of data backup & security, it may be enough to automatically backup the students local work folders to the NAS.
If the issue is one of the Users being able to work from any Mac and pick up their files from the server, you are not likely to resolve this problem, without copying the files to the Local Mac.
CCT

SSD Not Detected

Windows 7 32 bit
HP Pavilion dv6700 laptop from 2008
Sorry for the obscure title, but it's a little hard to explain in a few words.
Okay, so I installed Windows 7 on my new PT64GS25SSDR ~ Patriot Torqx TRB. It worked fine. I booted into Windows and everything. Then I go to restart, uh oh, operating system not found! Okay, load up the Windows disc, oh, it can't find Windows 7 on my computer! Eventually, with enough CTRL ALT DELing at the Operating System Not Found prompt, it boots into Windows just fine.
So basically here's the issue: the drive isn't regconized when turning on the computer from a cold start, or restarting (and I can't use Sleep anymore either as it tries to load the hard drive, can't, then just BSOD's).
The only way around this, is taking the drive out and putting it back in. Any time I do this, it boots just fine.
Though like I said, sometimes... I can get it to boot after CTRL ALT DELing many many times at the Operating System Not Found prompt. Thankfully I don't restart or shutdown often, so this is a minor inconvenience, but still... I'd rather it didn't happen at all. I'm using the adapter that came with my computer which was attached to my traditional hard drive ( https://www.excelcomputerinc.com/laptopkingstore/product.asp?intProdID=819&intcatalogID=[adapter]&in... ). Any help to resolve this issue is most appreciated!

I have the same problem with Intel Solid State 80GB SATA drive. I installed Linux from the CD-ROM without any problems but the laptop does not want to boot from the drive.
It seems like HP did not test these laptops with solid state drives yet and there is an incompatibility
Try to go to BIOS setup during booting to check if the drive is displayed, if it is then you may be able to change the settings somehow. The instructions for my SSD installaiton specifiy to change to auto detect, but my BIOS does not provide any such options, this is catch 22

APS driver "File not found"

When I go to this link
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS031389
The download there pops up a page that says "File not found"
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT.

FCP 'Not Found/General Error' probs...

I know I'm being really impatient with this (posted it on other discussions) but I have a deadline to meet next Monday, was really hoping someone could give me some advice as to what to do with the following problem, especially if it's something that takes time, means I can leave it overnight...
Okay, so...in the middle of editing this project, when I press space to play at a certain point it reads 'Not Found', then I press space again and it reads 'General Error'.
I've tried the advice on this page...http://forums.creativecow.net/thread/8/1066686
Still no luck?
Disk Warrior should arrive tomorrow! Don't know what to do now?
Have attached Activity Monitor screen grabs...
www.alex.mastersofcreation.com/alexw/ActivityMonitorPics.zip
can anyone see the problem here?

Clone your system and boot off the new drive, that would be where I would start from.
SuperDuper does that very well, and helps put your system in order, doesn't copy temp files, logs, and caches, all of which are junk and best created fresh.
I would never let system drive get above 60% used; or 20% free on the other drives either. Clean those up, get some more drives, maybe larger; consider striped arrays; move backup to external, too.
My guess is even with 20% free space, the free space is fragmented. Something that SuperDuper clone would consolidated.
Unless your boot drive is 10K 300GB Raptor (VelociRaptor), I'd look into WD Black 640GB and above... cheap but fast. Personally I go for lean mean and fast drives, especially for system, where only the OS and applications are stored and nothing much else (maybe a tiny minimal user account, sans media libraries which should all be on separate drive). A pair of 10K SSD or 10K V-Raptors as boot volume would be nice.
Your system could be choking on limited disk space. Plus, I'd keep your drives as current and new as possible (but not bleeding edge). Four WD Black Caviar 1TB drives might go a long way.... they are good fast 100MB/sec units.
I prefer the 10K VelociRaptor as they are rock solid, cold running, fast, and built more to SCSI type spec than SATA. (a new 600GB model of the 10K VR is due out in couple months for same price as 300GB).
And at least two if not three sets of backups, and one set always off line.
That should help build a more solid foundation.
you don't have a G5, could you include more of your hardware and system information (OS X as well, and maybe not be running 10.6.2).

Error 15: file not found [solved]

I've found a number of posts on this forum that sound like they are dealing with similar problems, but none of them are quite right.
Just built a new computer, and I have been trying to install arch all day.
The install went without a problem, but then when I booted her up, grub gives me error 15. I've reinstalled several times using both the UUID and disk by LABEL options, and I get the same error. At first I had separate /boot and / partitions, but in order to simplify things, I reinstalled with /boot on the root partition.
here are the relevant lines in menu.lst:
root (hd1,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-label/rooty ro vga=773
initrd /boot/kernel26.img
Maybe I should mention that this is an SSD.
Is there a way to determine WHICH file is not found? That might make solving this problem a little easier.
Last edited by Convergence (2011-02-22 21:56:11)

litemotiv wrote:
Is disk 1 the actual location of your SSD? Error 15 means that the kernel can not be found, this means that you're pointing grub to the wrong disk or partition.
Also see: https://wiki.archlinux.org/index.php/Grub
Try with the sdX scheme instead of uuid or label.
Disk 1? I'm a little confused. The kernel should be on sdb1 if that's what you mean.
I have scanned it before, but I think that it would be a good idea to enable debugging as per the wiki. It might help shed some light on this problem.
I haven't gone through the installer with the sdX scheme, but once everything was installed, I've used the grub console to change it to that scheme. It didn't seem to work, but maybe I'll try it again tomorrow before I give up on my ssd.
I'm beginning to think that recent versions of grub choke on my dual hard drive setup.

[SOLVED] Upgrade hard drive: Grub error 22: Partition not found

I'm trying to move to a different hard drive. I booted a live cd, created the partitions, formatted, and used "cp -a" to copy all the files over. I also updated the fstab on the new drive, and now I would expect everything to work. However, I can't get past grub.
When I boot up, I get "grub error 22: partition not found".
Here is my setup ("Arch Linux - SSD" is the entry not working):
menu.lst:
# (0) Arch Linux
title Arch Linux
root (hd0,6)
kernel /boot/vmlinuz26 root=/dev/sda7 ro vga=775
initrd /boot/kernel26.img
# (0) Arch Linux
title Arch Linux - SSD
root (hd1,2)
kernel /boot/vmlinuz26 root=/dev/sdb3 ro vga=775
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,6)
kernel /boot/vmlinuz26 root=/dev/sda7 ro
initrd /boot/kernel26-fallback.img
cat /boot/grub/device.map
(fd0) /dev/fd0
(hd0) /dev/sda
(hd1) /dev/sdb
(hd2) /dev/sdc
fdisk -l
Disk /dev/sdb: 115.0 GB, 115033153536 bytes
255 heads, 63 sectors/track, 13985 cylinders, total 224674128 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000d1ddc
Device Boot Start End Blocks Id System
/dev/sdb1 2048 8194047 4096000 82 Linux swap / Solaris
/dev/sdb2 8194048 161794047 76800000 83 Linux
/dev/sdb3 161794048 224673791 31439872 83 Linux
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x152104b0
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 771975167 385986560 7 HPFS/NTFS/exFAT
/dev/sda2 771987510 976768064 102390277+ 5 Extended
/dev/sda5 968350068 976768064 4208998+ 82 Linux swap / Solaris
/dev/sda6 813933288 968350004 77208358+ 83 Linux
/dev/sda7 771987573 813933224 20972826 83 Linux
Another note, is that grub-install takes a very long time to run after I update the menu.lst (5+ minutes), but the update does work without errors, and the new items do appear.
Any help would be appreciated, I'm wondering if I've just been looking at it too long...
Last edited by zhobbs (2011-05-11 19:40:04)

I solved this by using the uuid instead of the root:
# (0) Arch Linux
title Arch Linux - SSD
uuid 128a4425-c9ae-433f-b604-5488d55a14b3
kernel /boot/vmlinuz26 root=/dev/sdb3 ro vga=775
initrd /boot/kernel26.img
Also, I got "grub-install" to run much faster by removing the fd0 from the device map.

T420s/UEFI Boot - Bluetooth not found

Hello:
I had my system working fine under MBR boot then decided to rebuild on my intel 320 600gb drive. Now I cant install the bluetooth drivers - get a device not found message. Yes I have checked the BIOS settings. I'm wondering if this is perhaps a victim similar to the finger scanner? Anyone know?
Thanks
Ken
Solved!
Go to Solution.

You might need to install the Hotkey package first, then use Fn+F5 to turn on Bluetooth.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Help needed: Lion Server hangs during reboot (Symbol not found: _kCUIMaskOnlyKey)

Hi,
I not sure if this is the right forum but hopefully someone might be able to help.
Yesterday I was configuring my local mail system. (Local IMAP server and I checked the access from WLAN and Internet. Everything seems to
work fine until I noticed, that mails from my inbox would disappear automatically after a couple of seconds. I switched all mail clients (iPhone, ...) of,
sent a test mail - but the problem stays. I had no idea what was going on. So I decided to reboot the system. The system came up again and I logged in.
It looked like a fresh desktop was created and Safari wanted to make changes to the system. I decided to roll back the system and reinstalled it from
a backup before I made all the changes. After restoring the system hangs with the gray screen. I tried a reboot in save mode - same result. Then
I rebooted in single user mode. The file system looked OK, but I found many crashes in the system logs. Continuing to multi user mode did not succeed.
I received all the crash logs on the console.
Next I removed the disk and connected it to my laptop. I have extracted the last couple of line from the system log file:
Feb 26 00:58:44 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005835-1_l ocalhost.crash
Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]: dyld: Symbol not found: _kCUIMaskOnlyKey
Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]: in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:44 localhost com.apple.launchd[1] (com.apple.applepushserviced[697]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:44 localhost com.apple.launchd[1] (com.apple.applepushserviced): Throttling respawn: Will start in 9 seconds
Feb 26 00:58:44 localhost ReportCrash[55]: Saved crash report for applepushserviced[697] version ??? (???) to /Library/Logs/DiagnosticReports/applepushserviced_2012-02-26-005844_localhost.c rash
Feb 26 00:58:44 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/applepushserviced_2012-02-26-00 3929_localhost.crash
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.PasswordService[699]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.PasswordService): Throttling respawn: Will start in 9 seconds
Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for PasswordService[699] version ??? (???) to /Library/Logs/DiagnosticReports/PasswordService_2012-02-26-005845_localhost.cra sh
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.softwareupdatecheck.initial[700]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.softwareupdatecheck.initial): Throttling respawn: Will start in 9 seconds
Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/PasswordService_2012-02-26-0035 06_localhost.crash
Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for SoftwareUpdateCheck[700] version ??? (???) to /Library/Logs/DiagnosticReports/SoftwareUpdateCheck_2012-02-26-005845_localhost .crash
Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/SoftwareUpdateCheck_2012-02-26- 003020_localhost.crash
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.xpchelper.59000000-0000-0000-0000-000000000000[714]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]: dyld: Symbol not found: _kCUIMaskOnlyKey
Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]: in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for xpchelper[714] version ??? (???) to /Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005845_localhost.crash
Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005835-2_l ocalhost.crash
Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]: dyld: Symbol not found: _kCUIMaskOnlyKey
Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]: in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for xpchelper[721] version ??? (???) to /Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005845-1_localhost.crash
Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005835_loc alhost.crash
Feb 26 00:58:46 localhost com.apple.launchd[1] (com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]): Job appears to have crashed: Trace/BPT trap: 5
Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]: dyld: Symbol not found: _kCUIMaskOnlyKey
Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]: in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Feb 26 00:58:46 localhost ReportCrash[55]: Saved crash report for xpchelper[722] version ??? (???) to /Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005846_localhost.crash
Feb 26 00:58:46 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005836-1_l ocalhost.crash

Had the exact same problem yesterday on my mid-2010 Mac Pro with OS X 10.7.3 Server. Formatted my SSD boot drive and restored via time machine and I had the exact same error.
Here is how to solve it. Download from the apple site the OSX10.7.3ServerComboUpdate.dmg. I downloaded using my laptop. Extract the dmg and get the pkg file inside. Put it on a usb drive. Boot your broken OS X system in recovery mode(option key as you boot up, choose Recovery HD). Open the Terminal(don't use the single user mode,the following command did not work from there). If your OS X installation is Macintosh HD type the following(assuimg your USB disk is called USB,otherwise change it):
# cd /Volumes/Macintosh\ HD\
# mkdir update
# cd update
# cp /Volumes/USBDrive/*.pkg .
# installer --verbose -pkg MacOSX10.7.3ServerComboUpdate.pkg -target "/Volumes/Macintosh\ HD"/
When it finishes reboot and your OS X will boot normally.
Hope that helped.

Boot not found

My pavilion 14 sleekbook won't start and says boot device not found I need help.

Mrsflores, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them. It may be that you have a failed hard drive. I will help you more when I have the model.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Lenovo Quickstart (File not Found)

The new Lenovo Quickstart File ist not available after Terms agreement.

That is really a post to missunderstood...where is the file lost at home or online....
He means the broken link in the online driver section for the S10e ....
a new version of Quickstart is online, 1.0.17.2 dated 05.05.09 ,
but after term confirmation it doesnt begin to download... writes file not found....
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71591
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

P67A-GD65-B3 Realtek Adapter Not Found Windows 7 64-bit

Specs:
Mobo:P67A-GD65-B3
CPU: Intel Core i7-2600K Sandy Bridge 3.4GHz
Memory: CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ8GX3M2A1600C
Boot Drive: Intel 510 SSD - 120GB
Data Drive: Western Digital Caviar Black WD6402AAEX 640GB 7200 RPM SATA
Video: XFX HD-587X-ZNFC Radeon HD 5870 1GB 256-bit DDR5 PCI Express
OS: Windows 7 64-bit Professional
I've just finished installing the OS, and installed the driver DVD from MSI
Windows 7 is not recognizing that an network adapter is onboard
I reflashed the BIOS to current version 1.9 - no change
LAN is enabled in BIOS
When I try and install the Realtek drivers, I get the "Realtek Network Controller not found" error

Quote from: HU16E on 29-March-11, 06:31:07
I doubt seriously that dilburt was questioning your pc building prowess. Many suggestions are given generic as the build skills & knowledge of many posters is not known. Your other comments are non productive. Presume the I/O plate is not causing a problem, & has the port itself been closely examined for any damage?
No I wasn't questioning or accusing him of questioning my ability... merely that I know what I'm doing. Much of the advice has been responses suggesting things I already mentioned in my first post.
I will try the rear I/O panel and reset that as well.

SSD not found

Similar Messages

Maybe you are looking for