SSD not recognized by the bios of my GT70 2OD-056AU

Hello there,
I have a GT70 2OD-056AU since 3 months ago.
I tried to add a SSD in the second bay but it isn't recognized in the bios. The SSD is seated properly, it is a SAMSUNG SSD 840 EVO 2.5"
I changed the bios setting from AHCI to IDE and nothing changed.
I tried to replace de HDD with the SSD (add the SSD on the fist bay), and then it worked, but couldn't make both SSD and HDD work at the same time.
Do I need to update with the other bios (supporting the RAID) if I want to install another drive? Even if not necessarily in RAID?
Is there anything special that needs to be done when installing a 2nd drive on this system?
Thank you.

Quote
Do I need to update with the other bios (supporting the RAID) if I want to install another drive? Even if not necessarily in RAID?
Is there anything special that needs to be done when installing a 2nd drive on this system?
No to all. If SSD is connected properly to SATA and power try resetting EC: How to reset the EC (Embedded Controller)

Similar Messages

SSD not recognized by the bios of my GT780DX-263US

Hi,
I have a GT780DX-263US since 3 months.
I tried to add a 2nd hard drive but it isn't recognized in the bios. The hard drive is seated properly.
The original hard drive installed is the Western Digital and the bios is original also. (Bios ver.1761, i think).
The second hard drive i tried to installed is the Memoright FTM Plus 240gb Sata III SSD.
I changed the bios setting from AHCI to IDE and nothing changed.
Do i need to update with the other bios (supporting the RAID) if i want to install another drive? Even if not necessarily in RAID?
Is there anything special that needs to be done when installing a 2nd drive on this system?
Please somebody can help me?
Thanks
Max

Quote
Do I need to update with the other bios (supporting the RAID) if I want to install another drive? Even if not necessarily in RAID?
Is there anything special that needs to be done when installing a 2nd drive on this system?
No to all. If SSD is connected properly to SATA and power try resetting EC: How to reset the EC (Embedded Controller)

Hard drive and dvd are not recognized in the setup menu, what could be wrong?

The hard drive and dvd drive are not recognized on the setup menu for my Pavilion a4316f desktop computer. Could it be a failure of the controller? Can a PCI controller be used to replace the mother board controller?
This question was solved.
View Solution.

The Recovery process would erase you hard drive, and attempt to install a fresh OS. Decidely a bad choice if you wanted to save your data files. The Recovery sets are "tattoo" with the BIOS hardwafre configuration. It will not, IMHO, recognize the PCI Sata card.
You mentioned the Recovery program on the hard drive actually requested the installer of the controller (PCI card). Try running from that.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

SSD not detected in MSI bios?

So i have a corsair force lx SSD and it seems to be not detected on the bios. This SSD does have an OS in it and my pc does boot. but sometimes when i turn on my pc it gives the "9C" error i believe. after i did some research hat code means that it is searching for a bootable USB or something similar. So itry to move the SSD to first boot priority but the SSD is not even an option. It is detected, the mobo sees it in board explorer and all but it is not seen on the "boot priority"
I do have an HDD, Optical Drive and the SSD plugged in. But the SSD is in sata port 6. does plugging it farther down the sata port effect its "detectedness"? Should i move it down to sata port 1 or sata port 2?
Sorry if my grammar/sentence structure and all seems messed up. I am in a bit of hurry while typing this thread.
PC Specs:
CPU: fx8350 stock speed
GPU: XFX r9 280x stock speed
MOBO: MSI 970 Gaming
HDD: 1TB Seagate
SSD: Corsair 128GB LX
DVD player

Quote from: Nichrome on 14-September-14, 01:20:34
Which SATA port is the SSD plugged into? Make sure it is into #1 on the motherboard so it's detected as #1. Otherwise some play within BIoS is required to get it up.
The SSD is plugged into sata port 6.
My HDD is plugged into sata port 1
Optical drive is plugged into sata port 2
I will swap my SSD and HDD port and see if it will show up on the boot priority

Intermittent : The term 'get-date' is not recognized as the name of a cmdlet, function, script file, or operable program.

I have developed a batch harness whereby all scheduled tasks (W2012) invoke a common powershell script that acts as a wrapper to all our housekeeping jobs.
The first step in the wrapper is to create a Transcript file using following code
if ($Host.name -ne "Windows PowerShell ISE Host") # Transcript does not work within ISE
$timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
$path = "c:\corp\$timestamp" + "_$pid.txt"
Start-Transcript -path $path -append
As expected the folder contains files with timestamp & pid in name
08/08/2013 11:00 AM            14,388 2013-08-08-11-00-01.158_1620.txt
08/08/2013 11:00 AM            12,506 2013-08-08-11-00-01.485_936.txt
08/08/2013 11:00 AM            12,994 2013-08-08-11-00-01.735_9328.txt
08/08/2013 11:00 AM            12,024 2013-08-08-11-00-01.766_8624.txt
08/08/2013 11:00 AM            13,902 2013-08-08-11-00-01.860_1756.txt
08/08/2013 11:01 AM            15,142 2013-08-08-11-01-31.392_10120.txt
08/08/2013 05:00 AM            14,982 _1692.txt
However note the last file, it has a zero length date time value in the name
The error recorded by PowerShell is
get-date : The term 'get-date' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At C:\Corp\Powershell\DMPRun-ScheduledTask.ps1:171 char:18
+    $timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
+                  ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (get-date:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
IE get-date has failed and returned a zero length field as the timestamp
Can anyone think of a good reason why get-date would fail intermittently?
Do I have to code defensively for base Powershell functions?

I implemented David's suggestion and now I intermittently get
import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
At D:\temp\loop_jc2_2013_11_25_08_55_02.ps1:15 char:1
+ import-module Microsoft.Powershell.Utility
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [Import-Module], UnauthorizedA
   ccessException
    + FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
   erShell.Commands.ImportModuleCommand
I added a trap chain (My Powershell skills do not yet include recursive trap coding, any suggestions welcome)
trap {
    trap {
        "Trap1"
        "Exception: " + $_
        "Error: " + $Error[0]
        "Message: " + $_.Exception.Message
        "InnerException: " + $_.Exception.InnerException
        "StackTrace: " + $_.Exception.StackTrace
        "FailedItem: " + $_.Exception.ItemName
        import-module Microsoft.Powershell.Management
        import-module Microsoft.Powershell.Security
        import-module Microsoft.Powershell.Utility
    "Trap2"
    "Exception: " + $_
    "Error: " + $Error[0]
    "Message: " + $_.Exception.Message
    "InnerException: " + $_.Exception.InnerException
    "StackTrace: " + $_.Exception.StackTrace
    "FailedItem: " + $_.Exception.ItemName
    import-module Microsoft.Powershell.Management
    import-module Microsoft.Powershell.Security
    import-module Microsoft.Powershell.Utility
import-module Microsoft.Powershell.Management
import-module Microsoft.Powershell.Security
import-module Microsoft.Powershell.Utility
trap {
    "Trap3"
    "Exception: " + $_
    "Error: " + $Error[0]
    "Message: " + $_.Exception.Message
    "InnerException: " + $_.Exception.InnerException
    "StackTrace: " + $_.Exception.StackTrace
    "FailedItem: " + $_.Exception.ItemName
    exit 1
get-date
Now I intermittently get ..
Trap2
Exception: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
Error: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
Message: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
InnerException:
StackTrace:    at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.Threading.Mutex.MutexTryCodeHelper.MutexTryCode(Object userData)
   at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   at System.Threading.Mutex.CreateMutexWithGuaranteedCleanup(Boolean initiallyOwned, String name, Boolean& createdNew, SECURITY_ATTRIBUTES secAttrs)
   at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew, MutexSecurity mutexSecurity)
   at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew)
   at System.Management.Automation.AnalysisCache.CacheExportedCommands(PSModuleInfo module, Boolean force, ExecutionContext context)
   at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadUsingModulePath(PSModuleInfo parentModule, Boolean found, IEnumerable`1 modulePath, String name, SessionState ss, ImportModuleOptions options, ManifestProcessingFlags manifestProcessingFlags,
PSModuleInfo& module)
   at Microsoft.PowerShell.Commands.ImportModuleCommand.ImportModule_LocallyViaName(ImportModuleOptions importModuleOptions, String name)
   at Microsoft.PowerShell.Commands.ImportModuleCommand.ProcessRecord()
   at System.Management.Automation.CommandProcessor.ProcessRecord()
FailedItem:
import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
At D:\temp\loop_jc2_2013_11_25_09_19_52.ps1:26 char:1
+ import-module Microsoft.Powershell.Security
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [Import-Module], UnauthorizedA
   ccessException
    + FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
   erShell.Commands.ImportModuleCommand

My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

At present I have no power to the Gen 7, so need to get some power to it I think. I pressed the buttons as you suggested, but nothing is showing up at this point. Thank you for your response as the more I can rule out before I take it back the better I think.

I need help! when I am importing my NEF files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support"

I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you

Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
Thank you @dj_paige

My ipod video is not recognized by the computer what should i do/

my ipod video is not recognized by the computer what should i do?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

My email gets bounced into an eternal loop in the outbox and says that my iCloud and me account are not recognized by the server? I've tried setting up another account and it says that I already have them set up, and it is stil only sending 1 or 2 message

My messages get lost in an eternal loop in my out box and it says that my iCloud me accounts are not recognized by the server. I can send 1 or 2 out of 10.
We tried adding a new account and that didn't work. We then deleted the account and started again. Still didn't work. Extremely frustrated!

There also seems to be something wrong with the time!!! My posting says 5:30ish but it was 8:30ish?

After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
All wishes everyone...

New-MaiboxRestoreRequest is not recognized as the name of a cmdlet, function, script ?

I have restored successfully an exchange 2013 mailbox database from backup to the recovery database, but when i try to recover a user's mailbox I receive the following error
New-MaiboxRestoreRequest -SourceDatabase RDB1 -SourceStoreMailbox "testuser" -TargetMailbox [email protected]
The term 'New-MaiboxRestoreRequest' is not recognized as the name of a cmdlet, function,
script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
I already have the "mailbox import export" management role assigned to the logged in administrator.
Anand_N

silly me i spelt the command wrong
Anand_N

Calendar Server Error: At least one sharee was not recognized by the server. New invitations have not been sent.

I deployed a Mountain Lion Server with the calendar service active. Every time a user tries to share a calendar they have created under thier account to an external person using thier email address, the server gives the following error: "At least one sharee was not recognized by the server. New invitations have not been sent."
Invites to share a calendar to OD accounts on the server seem to work fine.
I have a calendar specific email address for external invites set up. The server seems to send individual event invites to external email addresses just fine, so I am thinking the email is working. Email is not served on the Mountain Lion Server. The account is through Google Apps using IMAP and SMTP.
What's even stranger, is that there doesn't seem to be any message in the Calendar error logs.
I've tried creating a new test account and no luck.
I don't know what else to try.
Thanks in advance for any help!

another 3rd party sofwtare that allows you opent he backup and grab info
http://www.processtext.com/abcblackberry.html
trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

WD6400BPVT SATA hard drive in Satellite A100 LE1(E) not recognized by latest BIOS

I recently purchased a WD6400BPVT (640GB) 2.5" SATA drive to replace the original 80GB drive. I have updated the BIOS to the latest version (2.30). With the new drive installed the system hangs on the splash screen when the BIOS tries to recognize the drive. I can not even enter the BIOS. If I put the old drive back in, the system boots fine again. I know the new drive is good because I have installed it sucessfully in an A100-0FH (also with the latest BIOS - vesion 6.00 without issues.
I tried Toshiba techical support in Canada and all they could tell me was to install SATA drivers. I tried to explain to them that the system does not get to the OS, so it is impossible to do so and it would not help in any event. Then they wanted me to pay for service since the system is out of warranty. I asked if they would refund my money if they failed to "fix" it, and the lady said "no". When a BIOS upgrade is required no technician willl be able to fix my problem. When I declined to pay the lady just hung up on me. So much for service.
I am trying desperately to bring this issue to Toshiba's attention. I know a simple BIOS update will fix it. If the WD640 does not work, which other drives will not work? How many drives to I have to buy to try to find one that works?
I have 5 Toshiba Satellite notebooks in the family, one that had to go in for warranty repairs twice. They followed up to make sure I was happy and I have been a very happy Toshiba customer so far. The treatment I got from technical support in Canada francly sucked. I am hopinng that someone withing Toshiba will read this and pass it to their BIOS people and then e-mail me an updated BIOS that will recognize my drive. Failing that I would at least hope for a list of large 2.5" SATA drives that my A100 LE1 will recognize.
Thank you.

Thx lorddethstalker.
I dropped the original sticks of RAM back in. Same error with TOSHIBA Recovery Wizard. Same apparent dead end with System Recovery Wizard. I get to System Recovery Options where I do not see the Vista operating system and am instructed to load drivers for the hard disk--but do not know what I am supposed to load from where.
I also do not know what I should expect to encounter in the context of a new SATA drive + Toshiba recovery disks. I sort of expected a plug and play scenario, plug in the new hard drive, boot to recovery disks, format new hard disk and install OS. How do I determine the drivers I should load at the System Recovery Option screen, and/or what should the "normal" sequence of events be with new SATA?
Gracias.

When I try to send an email with photo attachment to a contact a screen appears stating "the sender name is not recognized by the server " what do I need to change so this will not happen in the future. I am a novice!!!!!

When I try to send an email with photo attachment on my iPad a screen appears which states " the sender is not recognized by the server" . What do I have to change so I can always send emails fr om my iPad with or without attachments. I am a novice!!!!!!

If you purchased about 2 years ago new I am sure it is a Intel iMac. To find out what type of iMac you have just click on the Apple menu item in the finder and select about this Mac. I would check the ISP mail site and get the correct outgoing mail server info.

SSD not recognized by the bios of my GT70 2OD-056AU

Similar Messages

Maybe you are looking for