SSD Post-installation queries
Hi guys, I've tried searching and found many threads, but not one that applies exactly to my question so sorry to start a new SSD related thread!
So, I've got a White Macbook, Late 2009, and I'm going to buy a Crucial M500 120gb 2.5" Sata (Okay so far?)
The physical installation is all good, but I'm not too sure what I will be doing once it's installed.
I'm going to do a clean install, I don't need any files or programs etc.
And I have a OS X Install DVD that came with the Laptop (I think it's Snow Leopard), but I want to be running Mavericks like I am currently.
So, will I just have to re install snow leopard, and then get mavericks from the app store? If so... how
Thanks in advance, Will
Okay so this is what I will do:
1. Make a USB backup just incase
2. Install the SSD
3. Run the SL CD and open Disk Utility
4. Format the SSD with one partition
5. Go Back and Install Snow Leopard
6. After Installation go ahead on Update to Mavericks from Purchases in App Store.
Sound good?
Thanks to everyone for your help
Will
Similar Messages
-
SQL 2005 Upgrade complete! - Post installation tasks questions!
Hi All
I have managed to upgrade our DEV and TST ECC6 systems to SQL2005 (from SQL2000) and so far all seems ok however I have a a few questions and checks I would like some help with. I have included my post installation tasks at the bottom of this post, so you know what I have done.
I have noticed that when I run SGEN I get a short dump LOAD_VERSION_LOST which I am not sure what this means.
If there is anything else I need to do or should do please let me know.
Thanks
Phil
<b>Post Installation Tasks</b>
<u>SQL Queries</u>
exec sp_configure 'show advanced options', 1
reconfigure with override
exec sp_configure 'max degree of parallelism', 1
reconfigure with override
exec sp_configure 'xp_cmdshell', 1
reconfigure with override
alter database <SID> set page_verify checksum
go
alter database <SID> set auto_create_statistics on
go
alter database <SID> set auto_update_statistics on
go
alter database <SID> set auto_update_statistics_async on
go
dbcc updateusage ('<SID>')
go
exec sp_updatestats
go
<u>SAP Tasks</u>
Check SM21/SM50/DB02/ST04/ST22/SICK for any unusual error messages.Hello,
I want run the below script on SQL 2005, can anyone tell me how I run it in SQL 2005?
exec sp_configure 'xp_cmdshell', 1
reconfigure with override
I need to enable xp_cmdshell in sql 2005
Reg,
SAT -
Post installation activities in SCM 7.0 Installation.
Hi All,
I am in a process of installating SCM 7.0 and going through the installation guide "Installation GuideSAP SCM 7.0 SR1 ABAP on Solaris: Oracle , document version - 1.0-2009-05-04"
Along with SCM 7.0 we are also installation Livecache 7.7. In the same host we planned to install SCM 7.0 CI and LiveCache 7.7 Server.
I have following queries
1) My understaing is, there should not me more than one productive client in the SCM system. This client should be use for SCM and live cache.Is that correct?
2) As per installation document give above there are two point
5.13 BI-Specific Post-Installation Steps. Here it's talks about creating a client and do regarding transaction RSA1.
Can somebody give the details, what are the activities we need to do in RSA1.
3) How to integrate LiveCache and SCM sytem. Can somebody give the steps to of the integration of SCM and livecache.
Request you all to reply which will help me for SCM and livecache implementation.
ThanksHi Gurus,
We have installed SAP NW 7.4 SR2 with Process Integration and orchestration package (PO). Please suggest me what are all the configuration need to do in ABAP application system and AS JAVA system...
Regards,
Vetri -
SampleApp error during post-installation verification
I am installing Liquid Data 8.1 SP2 on Platform 8.1 SP2 in a Windows environment.
Installation appears to run OK, but on 'Post-Installation Tasks' the following
error is displayed after Login to the SampleApp (as any user) ...
An error has occurred:
EJB Exception: ; nested exception is:
weblogic.jws.control.ControlException: LDControl: Exception while executing expression.[EJB
Exception:; nested exception is:
java.rmi.RemoteException: Query Compilation Error (Type Checks) 1-3-1-2: Function
view:CustomerBaseView() is undefined.]
caused by: : weblogic.jws.control.ControlException: LDControl: Exception while
executing expression.[EJB Exception:; nested exception is:
java.rmi.RemoteException: Query Compilation Error (Type Checks) 1-3-1-2: Function
view:CustomerBaseView() is undefined.]
The console reports ...
Cannot use view 'urn:views:CustomerBaseView'. This view is discarded.
Any help much appreciated as this is just the installation verification step.
Thanks a million,
TonyIf you follow the steps to 'Configure the WebLogic Workshop IDE' you might get
the following error message later on when you try to create Liquid Data Java Controls:
"Schema compile error...
Error occured when compiling the target schemas of the selected query/queries
com.bea.ldi.server.common.MetaDataException: java.rmi.UnmarshalException: failed
to unmarshal class [Lcom.enosysmarkets.xmediator.server.common.Resource;; nested
exception is: java.io.StreamCorruptedException"
Go back and uncheck the 'Use Proxy Server' setting in the IDE Properties, reboot
the server and try again.
-
Hi All,
We are trying to configure Redwood basic version and have got some installation queries. Please let me know which is correct forum to post these questions.
Best regards,
VithalHi Vithal,
Not sure on what documents you are looking for. Here are the sources for them.
1) Help document that comes along with Redwood Explorer. This is the best source.
2) There are couple of Venky's Blogs. One such is
"https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a4bb2b-0901-0010-b79d-8d4edbe9cf14?prtmode=navigate"
3) Search for "Redwood", "SAP Central Process Scheduling" ( new name by SAP) on SDN and you will get soem documents.
4) Ask your Account Manager from SAP and he can help with any additional stuff he may have.
5) Visit Redwood site. www.redwood.com and you can get some additional material.
6) Not sure if SAP Educational services in Asia has started offering educational courses (but they are available in North America and Europe). Just check with them.
7) If someone from your organization is goign to visit TechEd or other SAP events you will probably find a booth on Solution Extensions and can get some mroe material.
Not sure if there is any best practices document available. You probably want to check that SAP service desk, they might have it. I will check if I have URL for the same.
The best way to use the tool is to first imagine or draw what you want to do about a process. Kind of process map then create it using the tool. May be using Visio to draw that diagram is good option. The tool is best used when you explorer it with keeping a drawing of what you want to achieve through the process.
I will recommend to avail one of the education classes from Redwood. That way you will know the tool much better and also will have additional material at hand. -
SAP Enterprise Portal - Post Installation Tasks
Hello everyone,
I am a beginner in the area of SAP Enterprise Portal. Please bear with me in case if I ask you stupid questions.
"Our idea is to deploy the BIW 3.5 IVIEW over the portal"
I have installed the SAP Enterprise Portal 6.0 SP6 on Windows 2000 server environment. I have followed the install guide and I have done the installation successfully. I am also able to logon to the portal server using the irl url http://sodium:5000/irj/portal as an Administrator.
As a BASIS administrator point of view, what are the next Post Installation activities that I need to perform?
(Our idea is to deploy the BIW 3.5 Iview over the portal)
I really appreciate your responses.
Thanks & regards,
NikeeHello Nikee,
Simply define the SAP BW system, add an Alias, import portal certificate (for SSO), and start creating functional iview that can render your BW queries and reports.
Create a System pointing to the BW server with the following details:
a) System ID
b) Client
c) Web Access Point with "WAS" as category containing the following
entries: -
· Protocol
· Hostname
Note: Domain name of WAS should be same as portal domain
After that create BW iviews
QueryString is in the form "CMD=LDOC&infocube=myCube&query=myQuery"
You should have WAS on the BW server and also IGS shall also be present.
To follow with the latest, see note #489961 and
http://help.sap.com/saphelp_nw04/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
Hope this will help.
Regards,
AAAttar -
System message at the time of login & need post installation
Hallo Everybody
I just install the SAP IDES ECC 5.0 (SQL database), I also running some transaction, but from 2 days i receive the message at the time of logging
System message
Validity of certificate from list with PSE type >system PSE < ends in 1 day. for more information see the SAP system log (transaction SM21)
but i also check the tran. SM21 but i can't find something that indicate what exact erroe and dignosis.
So please suggest me the solution.
Also what tran. are need to run (Post installation) after the installation. beacause i install IDES on standalone machine (Require Post installation proc.)
System Desc.
SID=ERP
instance no=00
host=sapsrv
database SQL 2005check these links for the PSE error:
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/fb993af7700577e10000000a11402f/frameset.htm
PSE certification validity end
post-processing steps are in the installation guide. -
Hi,
I am trying to install 11.5.10.2 OEL 5 installation on VMware. Its failing in the post installation checks: the DBC check and JSP checks are failing. Looking at the errors, it says that .dbc file is not generated. And because of which the JSP is also failing. I am able to access the portal http://vega.apps11i:8005 , but not anything after that.
So, I tried to generate the dbc file by running the adgendbc.sh file.. but its failing as below:
==============================================
adgendbc.sh started at Sun July 13 07:19:17 PDT 2008
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Params=
Unique constraint error (00001) is OK if key already exists
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
ADD call failed with exit code 127
Trying to update information ...
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
UPDATE call failed with exit code 127
Generating /u01/sam/applvck/vckappl/fnd/11.5.0/secure/vega.apps11i_vck.dbc
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
DBC generation failed with exit code 127
Generating /u01/sam/applvck/vckappl/fnd/11.5.0/secure/vega_vck.dbc
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
DBC generation failed with exit code 127
Updating Server Security Authentication
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
==================================================
So I checked if the librt.so.1, libdl.so.2 and libc.so.6 exist or not. But I see that those exist also. Unable to understand how to fix this. Please help.
Thanks
Vikram
[root@vega ~]# locate librt.so.1
/lib/librt.so.1
/lib/i686/nosegneg/librt.so.1
/lib/rtkaio/librt.so.1
/lib/rtkaio/i686/nosegneg/librt.so.1
/u01/sam/applvck/vckora/8.0.6/lib/stubs/librt.so.1
/u01/sam/applvck/vckora/iAS/lib/stubs/librt.so.1
/u01/sam/oravck/vckdb/9.2.0/lib/stubs/librt.so.1
[root@vega ~]# locate libdl.so.6
[root@vega ~]# locate libdl.so.2
/lib/libdl.so.2
/u01/sam/applvck/vckora/8.0.6/lib/stubs/libdl.so.2
/u01/sam/applvck/vckora/iAS/lib/stubs/libdl.so.2
/u01/sam/oravck/vckdb/9.2.0/lib/stubs/libdl.so.2
[root@vega ~]# locate libc.so.6
/lib/libc.so.6
/lib/i686/nosegneg/libc.so.6
/u01/sam/applvck/vckora/8.0.6/lib/stubs/libc.so.6
/u01/sam/applvck/vckora/iAS/lib/stubs/libc.so.6
/u01/sam/oravck/vckdb/9.2.0/lib/stubs/libc.so.6
Message was edited by: Vikram CI posted the installation log here. Apologize if its too long.
Succesfully changed Permissions for /u01/sam/applvck/vckappl/admin/VCK_vega/log
Processing DriverFile = /u05/start11i/startCD/Disk1/rapidwiz/template/adriapps.drv
Running Instantiation Drivers for /u05/start11i/startCD/Disk1/rapidwiz/template/adriapps.drv
instantiate file:
source : /u05/start11i/startCD/Disk1/rapidwiz/template/adrunias.sh
dest : /u01/sam/applvck/vckcomn/temp/adrunias.sh
backup : /u01/sam/applvck/vckcomn/temp/adrunias.sh to /u01/sam/applvck/vckappl/admin/VCK_vega/out/templbac/adrunias0.sh
setting permissions: 755
setting ownership: applvck:dba
instantiate file:
source : /u05/start11i/startCD/Disk1/rapidwiz/template/adrunat.sh
dest : /u01/sam/applvck/vckcomn/temp/adrunat.sh
backup : /u01/sam/applvck/vckcomn/temp/adrunat.sh to /u01/sam/applvck/vckappl/admin/VCK_vega/out/templbac/adrunat0.sh
setting permissions: 755
setting ownership: applvck:dba
Step 0 of 5
Command: /u01/sam/applvck/vckcomn/temp/adrunias.sh
Step 3 of 5: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has succeeded
Processing Step 3 of 5
Step 1 of 5
Command: /u01/sam/applvck/vckcomn/temp/adrunat.sh
Step 4 of 5: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has succeeded
Processing Step 4 of 5
Starting CVM on Middle Tier.....
Using Context file : /u01/sam/applvck/vckappl/admin/VCK_vega.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u01/sam/applvck/vckappl/admin/VCK_vega/out/07130653/VCK_vega.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Established
ADX Database Utility
getConnection() -->
sDbHost : vega
sDbDomain : apps11i
sDbPort : 1526
sDbSid : VCK
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@vega.apps11i:1526:VCK
Connection obtained
Result : Successfully uploaded the Context information template file to the DataBase
===========================================================================
Completed CVM on Middle Tier....
Succesfully changed Permissions for /u01/sam/applvck/vckcomn/temp
Setting service Oracle Apache Server VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adapcctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
adapcctl.sh version 115.43
Apache Web Server Listener is not running (dedicated HTTP) ...
Apache Web Server Listener is already stopped.
adapcctl.sh: exiting with status 2
.end std out.
cat: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sh: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
sh: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
sh: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
sh: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Setting service OracleTNSListener80APPS_VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adalnctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version
Shutting down listener process APPS_VCK.
adalnctl.sh: exiting with status 0
.end std out.
.end err out.
Setting service OracleConcMgrVCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adcmctl.sh stop
Timeout specified in context file: 1000 second(s)
script returned:
You are running adcmctl.sh version 115.20
Shutting down concurrent managers for VCK ...
adcmctl.sh: exiting with status 127
.end std out.
/u01/sam/applvck/vckappl/fnd/11.5.0/bin/CONCSUB: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Setting service OracleFormsServer-Forms60VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adfrmctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running adfrmctl.sh version 115.34
Unable to create logfile - permission denied
Attempted to write to:
/u01/sam/applvck/vckcomn/admin/log/VCK_vega/f60svrm.txt
adfrmctl.sh: exiting with status 1
.end std out.
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Setting service OracleReportServer-Rep60_VCK to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adrepctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running adrepctl.sh version 115.29
Reports Server for VCK is already stopped.
adrepctl.sh: exiting with status 2
.end std out.
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
ps: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckappl/fnd/11.5.0/bin/FNDSVCRG: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Setting service Oracle Metrics Client VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adfmcctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running adfmcctl.sh version 115.17
forms load balancing client for VCK already stopped.
adfmcctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service Oracle Metrics Server VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/adfmsctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running adfmsctl.sh version 115.13
forms metrics server for VCK on port 9205 already stopped.
adfmsctl.sh: exiting with status 2
.end std out.
.end err out.
Setting service Oracle Fulfillment Server VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/jtffmctl.sh stop
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.sh version 115.16
Shutting down Fulfillment Server for on port 9305 ...
jtffmctl.sh: exiting with status 0
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Setting service Oracle Discoverer services VCK_vega to mode 3
Executing service control script:
/u01/sam/applvck/vckcomn/admin/scripts/VCK_vega/addisctl.sh stop
Timeout specified in context file: 300 second(s)
script returned:
addisctl.sh version 115.14
OAD is not running
Osagent is not running
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
addisctl.sh: exiting with status 0
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/admkxdir.sh
script returned:
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/adgendbc.sh
script returned:
adgendbc.sh started at Sun Jul 13 06:58:55 PDT 2008
Params=
Unique constraint error (00001) is OK if key already exists
ADD call failed with exit code 127
Trying to update information ...
UPDATE call failed with exit code 127
Generating /u01/sam/applvck/vckappl/fnd/11.5.0/secure/vega.apps11i_vck.dbc
DBC generation failed with exit code 127
Generating /u01/sam/applvck/vckappl/fnd/11.5.0/secure/vega_vck.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/adgenjky.sh
script returned:
adgenjky.sh started at Sun Jul 13 06:58:58 PDT 2008
Unable to create the log file /u01/sam/applvck/vckcomn/admin/log/VCK_vega/VCK_vegajkey.log
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
script returned:
amscmprf.sh started at Sun Jul 13 07:01:34 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/amswebprf.sh
script returned:
amswebprf.sh started at Sun Jul 13 07:01:37 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/wshadmprf.sh
script returned:
wshadmprf.sh started at Sun Jul 13 07:01:47 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
wshadmprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/clnadmprf.sh
script returned:
clnadmprf.sh started at Sun Jul 13 07:01:54 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
clnadmprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
setting ownership: applvck:dba
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/okeadmprf.sh
script returned:
okeadmprf.sh started at Sun Jul 13 07:02:00 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
okeadmprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/okladmprf.sh
script returned:
okladmprf.sh started at Sun Jul 13 07:02:07 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/csfagprf.sh
script returned:
csfagprf.sh started at Sun Jul 13 07:02:21 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
csfagprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/csfwebprf.sh
script returned:
csfwebprf.sh started at Sun Jul 13 07:02:23 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
csfwebprf.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
setting ownership: applvck:dba
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/xnccmprf.sh
script returned:
xnccmprf.sh started at Sun Jul 13 07:02:29 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
setting ownership: applvck:dba
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/ibywebprf.sh
script returned:
ibywebprf.sh started at Sun Jul 13 07:02:37 PDT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/sam/applvck/vckora/8.0.6
ORACLE_SID :
TWO_TASK : VCK
PATH : /u01/sam/applvck/vckora/iAS/Apache/perl/bin:/u01/sam/applvck/vckora/8.0.6/bin:/u01/sam/applvck/vckappl/fnd/11.5.0/bin:/u01/sam/applvck/vckappl/ad/11.5.0/bin:/u01/sam/applvck/vckcomn/util/java/1.4/j2sdk1.4.2_04/bin:/u01/sam/applvck/vckcomn/util/unzip/unzip/unzip-5.50::/u01/sam/applvck/vckora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/u05/start11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /u01/sam/applvck/vckora/8.0.6/network/jre11/lib/i686/native_threads:/u01/sam/applvck/vckora/8.0.6/network/jre11/lib/linux/native_threads:/u01/sam/applvck/vckappl/cz/11.5.0/bin:/u01/sam/applvck/vckora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib
Executable :
ERRORCODE = 127 ERRORCODE_END
.end std out.
which: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
.end err out.
Executing script in InstantiateFile:
/u01/sam/applvck/vckcomn/admin/install/VCK_vega/paadmprf.sh
script returned:
paadmprf.sh started at Sun Jul 13 07:02:43 PDT 2008
Executable :
ERRORCODE = 127 ERRORCODE_END
Message was edited by: Vikram C -
#I hope its the right forum to post that in, if not im very sorry!
This here is a script i wrote to automate all the stuff i do after installing arch, i have several computers and it has options for a additional one
Some important points:
1) this script is very specific, its made for my computer and my needs, this means that its useful right now only to people who know bash
and will find use in altering it to their own needs, also if someone wants he can make it more general for a wider use
2) this is one of the first scripts i wrote, it may be that it doesn't implent some of its features in the best way possible
3) use it at your own risk, if it breaks your system don't blame me please, you should check it before you use it, anyway its meant to be used
on a FRESH arch install, not on a working system.
What the correct script actually does:
The script as stated in the comments does the next things:
1) First of all it consists of several files, one the "install" file is the actual script, the others are just meant to run the script and split its output to
show both on the terminal and in a file named: /var/log/MySysInstall.log, here is an example of main.install:
#!/bin/bash
./install Main | tee /var/log/MySysInstall.log
in the current script Main in the last row can be replaces with Laptop, Game for computer specific arguments or without argumets for a general install
the two files should be in the same folder, i think it could have been implented with one file but im new to scripting..
2) The script will ask some general questions to make sure everything is currect, some of the questions and checks in the script are not relevant at all
to anybody other than myself, they usually make sure that i have a samba shared partition running (it could lose connection on wireless).
3) Adds the archlinux.fr repo, it will be used for yaourt.
4) The script installs lots of stuff, at first general stuff used by all computers in my house, then stuff based on the argument given in 1)
please inspect the packages and change according to your needs
5) The script nano's to /etc/yaourtrc
6) Adds users to the system, change to your users.
7) It creates my /home/samba share dir if its not created (probably irrelevant to you)
8) Configures sudo in a nasty way that maybe can damage the sudoers file, delete this line if you dodnt know sudo well enough.
9) Edits samba if needed, this is the first line in the script that relies on additional files i have on my comp or the samba share (main and game are the same
comp (dual boot of arch32 and 64) and they are the hosts of /home/samba all the other computers will mount it from them, this is why a samba check is not
present here.).
10) Adds some commented lines to fstab and nano's it for easier configurations, this is the regular workflow in the script BTW (adding comments to the file
before editing it)
11) Helps edit the gpm daemon
12) Helps to configure alsa
13) Helps to configure xorg
14) Does some post install copies of files AND creates a file in my main users home with further instructions, mostly for stuff that needs to be done with xorg runnig
or stuff i was to lasy to add to the script
15) chowns and sets my regular permissions for user folders
16) ends the script
The script itself, ENJOY:
#!/bin/bash
# Copyright 2008 Leon Vayman
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# A copy of the GNU General Public License is found in
# <http://www.gnu.org/licenses/>.
#Check that the user updated the kernel and restarted before proceeding
while [ 1 ] ; do
echo ; clear
echo -n "Have you already used pacman -Syu and Restarted? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
echo "Then do it now.."
exit
esac
done
#Check if samba is accesible and warn the user if its not (offering to quit)
if [ ! -e /home/samba/Config/ ] ; then
while [ 1 ] ; do
echo ; clear
echo -n "Samba is not accesible, do you want to proceed? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
exit
esac
done
fi
#Make sure the app wasnt ran accidently with wrong arguments
while [ 1 ] ; do
echo ; clear
echo -n "The comp you are on is $1 is that correct? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
exit
esac
done
#Edit /etc/pacman.conf
echo ; clear
echo >> /etc/pacman.conf
echo "[archlinuxfr]" >> /etc/pacman.conf
if [ "$1" = "Game" ] ; then
echo "Server = http://repo.archlinux.fr/x86_64" >> /etc/pacman.conf
else
echo "Server = http://repo.archlinux.fr/i686" >> /etc/pacman.conf
fi
echo -n "Make sure the right archlinux.fr repo was added "
read n1
nano /etc/pacman.conf
echo ; clear
#Install all packages
echo "Installing packages"
pacman -Syu
pacman -S yaourt
pacman -S xorg
pacman -S gstreamer0.10-plugins
yaourt -S abiword alsa-lib alsa-utils alsa-oss bash-completion cabextract centerim conky exaile hal epdfview feh freetype2 gamin gconf-editor geany gksu gmrun gnome-icon-theme gpicview \
gtk-engines zip irssi jre links-g libdvdcss tcl lxappearance lxpanel lxde-common lxrandr lxtask mesa moc mousepad mplayer-plugin numlockx openbox obconf obmenu openbox-themes \
p7zip pcmanfm pidgin pm-utils powertop screen terminal ttf-bitstream-vera ttf-dejavu ttf-freefont ttf-ms-fonts unace unrar unzip xarchiver xchat xmahjongg
yaourt -S stjerm
case "$1" in
"Laptop")
yaourt -S vlc keytouch keytouch-editor xf86-video-i810 synaptics cpufrequtils flashplugin
yaourt -S swiftweasel-pentium-3
yaourt -S wpa_supplicant-beta
yaourt -S xcompmgr-git
"Main")
yaourt -S flashplugin cpufrequtils epiphany catalyst deluge amule xmoto abs samba
yaourt -S icecat
yaourt -S xcompmgr-git
yaourt -S ekiga3
yaourt -S ov51x-jpeg
yaourt -S vlc-branch
yaourt -S brasero-no-gnome
"Game")
yaourt -S epiphany catalyst deluge amule xmoto abs samba ##!! add gnash or swfdec
yaourt -S icecat
yaourt -S ekiga3
yaourt -S ov51x-jpeg
yaourt -S vlc-branch
yaourt -S brasero-no-gnome
echo -n "No extra packages installed "
esac
echo -n "Press Enter to continue "
read n1
echo ; clear
#Configure yaourt.rc
echo -n "Replace the editor in yaourtrc "
read n1
nano /etc/yaourtrc
echo ; clear
#Add users
echo "Adding User vleon"
useradd -d /home/vleon -g users -G disk,wheel,games,video,audio,optical,storage,power,dbus,hal,avahi,log -m vleon
echo "Set vleon's password"
passwd vleon
echo ; clear
echo "Adding User masha"
useradd -d /home/masha -g users -G disk,wheel,games,video,audio,optical,storage,power,dbus,hal,avahi,log -m masha
echo "Set masha's password"
passwd masha
echo ; clear
#If for some reason samba dir doesnt exist, create it
if [ ! -e /home/samba ] ; then
mkdir /home/samba
chown vleon:users /home/samba
chmod 770 /home/samba
fi
#Configure visudo
echo -n "uncomment wheel in visudo and make sure the added lines are correct "
read n1
echo "#%power ALL=(ALL) NOPASSWD: /usr/sbin/pm-hibernate" >> /etc/sudoers
echo "#%power ALL=(ALL) NOPASSWD: /sbin/shutdown" >> /etc/sudoers
visudo
echo ; clear
#Edit samba if needed
if ( [ "$1" = "Main" ] || [ "$1" = "Game" ] ) ; then
echo -n "Edit swat "
read n1
cp /home/samba/Config/etc/xinetd.d/swat /etc/xinetd.d/swat
nano /etc/xinetd.d/swat
echo ; clear
echo -n "Edit Hosts "
read n1
cp /home/samba/Config/etc/hosts.allow /etc/hosts.allow
nano /etc/hosts.allow
echo ; clear
echo -n "Edit smb.conf "
read n1
cp /home/samba/Config/etc/samba/smb.conf /etc/samba/smb.conf
nano /etc/samba/smb.conf
echo ; clear
echo "Set vleon's samba password"
smbpasswd -a vleon
echo ; clear
echo -n "Add samba and xinetd daemon to rc.conf "
read n1
nano /etc/rc.conf
echo ; clear
fi
#Edit fstab
echo -n "Edit fstab "
read n1
echo >> /etc/fstab
if [ "$1" != "Laptop" ] ; then
echo "#UUID=92D8DA69D8DA4ADD /mnt/windows ntfs-3g defaults,noatime 0 0" >> /etc/fstab
if ( [ "$1" != "Main" ] && [ "$1" != "Game" ] ) ; then
echo "#UUID=0E15-1D06 /mnt/windows vfat defaults,noatime,umask=0000 0 0" >> /etc/fstab
echo "#//192.168.1.100/samba /home/samba cifs defaults,noatime,noauto,user=vleon%pass 0 0" >> /etc/fstab
echo "##change the above password!!" >> /etc/fstab
fi
nano /etc/fstab
echo ; clear
else
echo "#UUID=0E15-1D06 /mnt/windows vfat defaults,noatime,umask=0000 0 0" >> /etc/fstab
echo "#//192.168.1.100/samba /home/samba cifs defaults,noatime,noauto,user=vleon%pass 0 0" >> /etc/fstab
echo "##change the above password!!" >> /etc/fstab
nano /etc/fstab
echo ; clear
fi
#Edit gpm
echo -n "Edit gpm "
read n1
echo "#GPM_ARGS=\"-m /dev/input/mice -t imps2\"" >> /etc/conf.d/gpm
nano /etc/conf.d/gpm
echo ; clear
echo -n "Add gpm daemon to rc.conf "
read n1
nano /etc/rc.conf
echo ; clear
#Configure alsa
Alsa Config
test=1
echo -n "Edit alsamixer "
read n1
while [ "$test" = 1 ] ; do
alsamixer -V all
echo "Testing Sound"
aplay /usr/share/sounds/alsa/Noise.wav
while [ 1 ] ; do
echo ; clear
echo -n "Did You Hear Any Sound? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
test=0
break
[Nn])
break
esac
done
done
alsactl store
echo -n "Add alsa to daemons "
read n1
nano /etc/rc.conf
echo ; clear
#Configure Xorg
if [ -e /home/samba/Config/etc/X11/ ] ; then
echo -n "Edit xorg.conf "
read n1
if ( [ "$1" = "Laptop" ] ) ; then
cp /home/samba/Config/etc/X11/laptop.xorg.conf /etc/X11/xorg.conf
else
cp /home/samba/Config/etc/X11/main.xorg.conf /etc/X11/xorg.conf
fi
nano /etc/X11/xorg.conf
echo ; clear
echo -n "add \"ru\" to xorg.conf.mom "
read n1
cp etc/X11/xorg.conf etc/X11/xorg.conf.mom
nano /etc/X11/xorg.conf.mom
echo ; clear
else
echo -n "No samba connection found, manually editing xorg.conf "
read n1
X -configure
mv /root/xorg.conf.new /etc/X11/xorg.conf
echo >> /etc/X11/xorg.conf
echo "# Option \"XkbLayout\" \"us,il\"" >> /etc/X11/xorg.conf
echo "# Option \"XkbOptions\" \"grp:alt_shift_toggle,grp_led:scroll\"" >> /etc/X11/xorg.conf
echo "# DefaultDepth 24" >> /etc/X11/xorg.conf
echo "# Modes \"1680x1050\" \"1280x1024\" \"1024x768\" \"800x600\"" >> /etc/X11/xorg.conf
if [ "$1" = "Laptop" ] ; then
echo >> /etc/X11/xorg.conf
echo "#Section \"InputDevice\"" >> /etc/X11/xorg.conf
echo "# Identifier \"Touchpad\"" >> /etc/X11/xorg.conf
echo "# Driver \"synaptics\"" >> /etc/X11/xorg.conf
echo "# Option \"Device\" \"/dev/input/mouse0\"" >> /etc/X11/xorg.conf
echo "# Option \"Protocol\" \"auto-dev\"" >> /etc/X11/xorg.conf
echo "# Option \"LeftEdge\" \"1700\"" >> /etc/X11/xorg.conf
echo "# Option \"RightEdge\" \"5300\"" >> /etc/X11/xorg.conf
echo "# Option \"TopEdge\" \"1700\"" >> /etc/X11/xorg.conf
echo "# Option \"BottomEdge\" \"4200\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerLow\" \"25\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerHigh\" \"30\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerPress\" \"100\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxTapTime\" \"180\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxTapMove\" \"220\"" >> /etc/X11/xorg.conf
echo "# Option \"VertScrollDelta\" \"100\"" >> /etc/X11/xorg.conf
echo "# Option \"MinSpeed\" \"0.06\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxSpeed\" \"0.12\"" >> /etc/X11/xorg.conf
echo "# Option \"AccelFactor\" \"0.0010\"" >> /etc/X11/xorg.conf
echo "# Option \"SHMConfig\" \"on\"" >> /etc/X11/xorg.conf
echo "#EndSection" >> /etc/X11/xorg.conf
fi
echo -n "Edit xorg.conf "
read n1
nano /etc/X11/xorg.conf
echo ; clear
echo -n "add \"ru\" to xorg.conf.mom "
read n1
cp etc/X11/xorg.conf etc/X11/xorg.conf.mom
nano /etc/X11/xorg.conf.mom
echo ; clear
fi
#Start the post install document and copy files to homes if able and need to
echo "Post Installation Instructions" > /home/vleon/PostInstall.txt
echo "------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "Usage: Follow the instructions and delete the lines that are not relevant anymore. you can delete" >> /home/vleon/PostInstall.txt
echo " this file after you finished." >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
if [ ! -e /home/vleon/.config] ; then
if [ -e /home/samba/Config/ ] ; then
cp /home/samba/Config/.bash_profile /home/vleon/ ; cp /home/samba/Config/.bash_profile /home/masha/
cp /home/samba/Config/.bashrc /home/vleon/ ; cp /home/samba/Config/.bashrc /home/masha/
cp /home/samba/Config/.xinitrc /home/vleon/ ; cp /home/samba/Config/.xinitrc /home/masha/
cp /home/samba/Config/.xserverrc /home/masha/
mkdir -p /home/vleon/.config/openbox ; mkdir -p /home/masha/.config/openbox
cp /home/samba/Config/.config/openbox/rc.xml /home/vleon/.config/openbox/ ; cp /home/samba/Config/.config/openbox/rc.xml /home/masha/.config/openbox/
if [ "$1" = "Laptop" ] ; then
cp /home/samba/Config/.conkyrc.laptop /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.laptop /home/masha/.conkyrc
cp /home/samba/Config/.Xdefaults.laptop /home/vleon/.Xdefaults ; cp /home/samba/Config/.Xdefaults.laptop /home/masha/.Xdefaults
cp /home/samba/Config/.config/openbox/menu.xml.laptop /home/vleon/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/menu.xml.laptop /home/masha/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/autostart.sh.laptop /home/vleon/.config/openbox/autostart.sh
cp /home/samba/Config/.config/openbox/autostart.sh.laptop /home/masha/.config/openbox/autostart.sh
else
if ( [ "$1" != "Main" ] && [ "$1" != "Game" ] )
cp /home/samba/Config/.conkyrc.laptop /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.laptop /home/masha/.conkyrc
else
cp /home/samba/Config/.conkyrc.main /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.main /home/masha/.conkyrc
fi
cp /home/samba/Config/.Xdefaults.main /home/vleon/.Xdefaults ; cp /home/samba/Config/.Xdefaults.main /home/masha/.Xdefaults
cp /home/samba/Config/.config/openbox/menu.xml.main /home/vleon/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/menu.xml.main /home/masha/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/autostart.sh.main /home/vleon/.config/openbox/autostart.sh
cp /home/samba/Config/.config/openbox/autostart.sh.main /home/masha/.config/openbox/autostart.sh
fi
else
echo >> /home/vleon/PostInstall.txt
echo "!!Samba is not availble, you will have to create the following files yourself!!" >> /home/vleon/PostInstall.txt
fi
echo >> /home/vleon/PostInstall.txt
echo "The folowing files where probably created in your home folders:" >> /home/vleon/PostInstall.txt
echo ".bash_profile" >> /home/vleon/PostInstall.txt
echo ".bashrc" >> /home/vleon/PostInstall.txt
echo ".conkyrc" >> /home/vleon/PostInstall.txt
echo ".Xdefaults" >> /home/vleon/PostInstall.txt
echo ".xinitrc" >> /home/vleon/PostInstall.txt
echo ".xserverrc #<< only to /home/masha" >> /home/vleon/PostInstall.txt
echo ".config/openbox/autostart.sh" >> /home/vleon/PostInstall.txt
echo ".config/openbox/menu.xml" >> /home/vleon/PostInstall.txt
echo ".config/openbox/rc.xml" >> /home/vleon/PostInstall.txt
echo "!!Make sure the above files created and are configured properly!!" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "Configuration Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) make sure width and hight are correct .Xdefaults" >> /home/vleon/PostInstall.txt
echo "2) make sure to comment the \"xcompmgr\" line in autostart.sh, to fit the Computer and User" >> /home/vleon/PostInstall.txt
echo "3) use obmenu and obconf later to tune up stuff" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "rc.conf Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) possible modules are: powernow-k8 or acpi-cpufreq, cpufreq_ondemand, ov51x-jpeg, fglrx" >> /home/vleon/PostInstall.txt
echo "2) possible daemons are: hal, cpufreq, acpid [laptop], netfs, keytouch" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "General Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) copy or compare the files from /home/samba/Config/etc to /etc" >> /home/vleon/PostInstall.txt
echo "2) on the laptop, dont forget to add the additional scripts needed from the /home/samba/Config/, dont forget to backup replaced files" >> /home/vleon/PostInstall.txt
echo "3) add resume=/dev/sda3 to /boot/grub/menu.lst if its not there already" >> /home/vleon/PostInstall.txt
echo "4) dont Forget to configure gksu after launching X" >> /home/vleon/PostInstall.txt
echo "5) lauch and configure all the apps in the menu and the cmdline apps links -g, mocp, irssi, centerim" >> /home/vleon/PostInstall.txt
echo "6) test logout, reboot, shutdown and hibernate" >> /home/vleon/PostInstall.txt
echo "7) configure keytouch on the laptop" >> /home/vleon/PostInstall.txt
echo "8) if it doesnt exist mkdir ~/.Theme for both users and add a jpg picture named theme.jpg to be the wallpaper" >> /home/vleon/PostInstall.txt
echo "9) read /var/log/MySysInstall.log and make sure all was succesfull especialy AUR install's like icecat or iceweasel" >> /home/vleon/PostInstall.txt
echo "10) run lxappearance, configure lxpanel, configure terminal" >> /home/vleon/PostInstall.txt
echo "11) run powertop after you restart again with all the modules and daemons and other stuff configured" >> /home/vleon/PostInstall.txt
#Return ownership to the approtiate users
chown -R vleon:users /home/vleon ; chown -R masha:users /home/masha
chmod /home/vleon 750 ; chmod /home/masha 750
chmod /home/vleon/.config 750 ; chmod /home/masha/config 750
chmod /home/vleon/.config/openbox 750 ; chmod /home/vleon/.config/openbox 750
#End
echo "Install Finished, please additional instructions where created in /home/vleon/PostInstall.txt"
read n1
exitluckystar09 - I'd say you're on your own there. This thread is nearly a year old, and Black Mage hasn't posted here since. Read the script, and modify it yourself as required.
Forum rule - do not post in threads that have been inactive for six months of more. See here for full details.
Closed. -
11.5.10.2 Post Installation Check Failures in Linux
Hi All,
I had installed 11i (11.5.10.2) in an external drive (made as a Linux OS through VM Ware) and was trying to access through my laptop (having OS XP Professional)
The Installation of 11i in Linux (RHEL 4) went fine, except during the post installation checks I got the following errors:
1. JSP Check failed
and
2. Environment File Check failed
============================================
For the JSP Check:
a. I ensured the dbc file in $FND_SECURE top is fine
b. The jserv.log file shows as below:
java.lang.NumberFormatException: For input string: "%s_servlet_init_timeout%"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Long.parseLong(Long.java:394)
at java.lang.Long.<init>(Long.java:630)
at org.apache.java.util.Configurations.getLong(Configurations.java:678)
at org.apache.java.util.Configurations.getLong(Configurations.java:657)
at org.apache.jserv.JServServletManager.init(JServServletManager.java:320)
at org.apache.jserv.JServ.start(JServ.java:622)
c. The mod_jserv.log is as follows:
[04/07/2008 15:42:21:813] (EMERGENCY) ajp12: function auth fail
[04/07/2008 15:42:22:233] (EMERGENCY) ajp12: auth did not receive challenge size
[04/07/2008 15:42:22:234] (EMERGENCY) ajp12: function auth fail
[04/07/2008 15:42:29:394] (EMERGENCY) ajp12: auth did not receive challenge size
[04/07/2008 15:42:29:395] (EMERGENCY) ajp12: function auth fail
[04/07/2008 15:42:29:763] (EMERGENCY) ajp12: auth did not receive challenge size
d. I had given the virtual host as vision.imax.info, where imax.info is a named server that is registered
I am able to dig vision.imax.info, as shown below:
[root@vision etc]# dig vision.imax.info
; <<>> DiG 9.2.4 <<>> vision.imax.info
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 3228
;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;vision.imax.info. IN A
;; Query time: 12 msec
;; SERVER: 192.168.222.5#53(192.168.222.5)
;; WHEN: Fri Jul 4 18:59:56 2008
;; MSG SIZE rcvd: 34
but please note that my ifconfig gives the following output:
[root@vision etc]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:5E:C8:97
inet6 addr: fe80::20c:29ff:fe5e:c897/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:15421 errors:0 dropped:0 overruns:0 frame:0
TX packets:11828 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1464189 (1.3 MiB) TX bytes:2554712 (2.4 MiB)
Interrupt:177 Base address:0x1080
eth0:0 Link encap:Ethernet HWaddr 00:0C:29:5E:C8:97
inet addr:192.168.222.5 Bcast:192.168.222.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:177 Base address:0x1080
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2058114 errors:0 dropped:0 overruns:0 frame:0
TX packets:2058114 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:297458110 (283.6 MiB) TX bytes:297458110 (283.6 MiB)
and the linux OS having the static IP as follows:
IP: 192.168.222.5
Mask: 255.255.255.0
Gateway: 192.168.222.5
Primary DNS: 192.168.222.5
========================
And for the Environment File check:
The Error is:
RW 10006: Error: - APPL_TOP environment files has uninstantiated variables
File = /d01/oracle/visappl/VIS_vision.env
But I am not able to locate which variable is not instantiated...
Please help me to resolve this out... Please correct me if I am wrong any where..
Many Thanks....Please note that, when I restarted the application services in a different terminal, I got the following script Error, only for the below mentioned script:
Executing service control script:
/d01/oracle/viscomn/admin/scripts/VIS_vision/addisctl.sh start
script returned:
addisctl.sh version 115.14
/d01/oracle/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Cannot bind to OAD. Re-starting...
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
/d01/oracle/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Registering Discoverer Session
Registering the Collector
Applying preferences from file : /d01/oracle/visora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Closing down registry..
Registry File sync...
Registering Discoverer Preference Repository
addisctl.sh: exiting with status 127
.end std out.
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
.end err out.
Check logfile /d01/oracle/viscomn/admin/log/VIS_vision/07042249.log for details
Exiting with status 1
====================
The /d01/oracle/viscomn/admin/log/VIS_vision/07042249.log file shows the following too:
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server VIS_vision adapcctl.sh Started
OracleTNSListener80APPS_VIS_vision adalnctl.sh Started
OracleConcMgrVIS_vision adcmctl.sh Started
OracleFormsServer-Forms60VIS_vision adfrmctl.sh Started
OracleReportServer-Rep60_VIS adrepctl.sh Started
Oracle Metrics Client VIS_vision adfmcctl.sh Started
Oracle Metrics Server VIS_vision adfmsctl.sh Started
Oracle Fulfillment Server VIS_vision jtffmctl.sh Started
Oracle Discoverer services VIS_vision addisctl.sh Failed
Oracle Restricted Apache Server VIS_vision adaprstctl.sh Disabled
Oracle Apache Server VIS_vision for PL/SQL adapcctl.sh Disabled
Oracle TCF SocketServer VIS_vision adtcfctl.sh Disabled
Oracle ICSM VIS_vision ieoicsm.sh Disabled
Oracle iProcurement Bulk Loader VIS_vision icxblkctl.sh Disabled
ServiceControl is exiting with status 1
Where could be the problem for the above issues.... -
WSUS reinstall on 2012 SCCM server post-installation task fails to run/finish
I had to re-install WSUS on a 2012 R2 SCCM server (Windows 2012), and am running into several issues re-installing. It may help to point out that the SCCM SQL server is remote, so this isn't a WSUS / SQL 2012 issue.
The sticky post at the top of the WSUS forum has helpful troubleshooting information, and I have tried going through this as well as many other threads on this very topic of re-installing WSUS.
1. Roles for WSUS and WID were removed successfully. The WSUS Website was manually deleted from IIS. As this is a SCCM server, removing the IIS role is not an option.
2. I removed the existing WID database files for SUSDB
3. After rebooting, I verified registry keys were gone, system files were cleaned up, and deleted the program files\update services directory
4. This isn't a permission issue, as I have clearly installed this before on this server.
5. Registry keys, system files, and susdb files no longer exist, and the server has rebooted cleanly.
6. I am able to add the WSUS role selecting WID, and this installs WID without any errors. At this point, simply clicking the post installation task fails, generates an empty .tmp file in my %appdata%\temp folder, and exits the MMC.
7. This file is blank. Absolutely empty, so I couldn't really troubleshoot any post installation tasks.
8. Further investigation shows that the 'C:\Program Files\Update Services\Tools\' directory is gone, and isn't being
generated.
9. Ok... DISM /online /Cleanup-Image /Scanhealth didn't return any issues, so I copied the wsusutil out of the windows\WinSxS directory.
10. Yey! wsusutil postinstall runs, but bombs out on the IIS portion. It generated the DB without an issue, but results
in an IIS generation error. So, I installed WSUS on a clean 2012 install, then copied over the program files\updateServices directory to reclaim the missing files.
The log files show --
2013-12-06 10:30:34 Configuring IIS...
2013-12-06 10:30:35 Start: ConfigureWebsite
2013-12-06 10:30:36 Configuring website on port 8530
2013-12-06 10:30:39 System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
... ok - tripple checked that network service has permissions to .net and windows\temp folders.
netstat -a doesn't show anything running on port 8530 ( in case this was some weird port check in use)
Which goes back to the missing directory problem -- further net searches show that this is a reoccurring issue for some OOBE... sfc /verifyonly shows ... nothing.
What is left to be done at this point? The missing folders from the program directory seems to be a problem for some with some users right out of the box. I have read many other threads where users just formatted and started over. Not exactly a solution
- any help out there on this issue? Any suggestions to determine what file is missing, or generating the IIS issues?Part of the post install tasks wanted to download some items including the tools folder.
Can you expand on this please. The WSUS post-install tasks do not download anything, except what is acquired during the initial synchronization with Microsoft.
Because of my group policy the WSUS server was trying to download the updates from itself even though it was not setup yet.
What update(s) was the WSUS server trying to "download"?
In fact, if the WSUS Server was not setup yet (but you already had a GPO in place), then the first issue here was performing deployment steps out of order.
But still.... except for the actual installation binaries for the WSUS Server Role on a WS2008SP2/WS2008R2 system, there's nothing the WSUS server needs to get from either Windows Update or a WSUS server. This scenario is actually discussed hundreds of times
in this forum, but complicating matters, this thread isn't about installing WSUS V3.2 on a WS2008SP2/WS2008R2 system, it's about installing WSUS v65 on a WS2012 system, so I'm a bit confused as to what the actual installation environment is that we're discussing.
I changed the WSUS server to get it's windows updates from Microsoft and then the post install task succeeded.
I'd really like to get some more details about what exactly in the "post-install task" was dependent upon content from WU/WSUS.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Oracle 8.0.5 Post Installation Problem
Hi all,
I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
However, I am running into a couple of post-installation
problems.
1. root.sh (sucessfully ran).
2. glibc patch (successfuly ran). There were a few errors on the
screen with the "mv" commands (file does not exist). Is tha
alright?
3. catrep.sql (problem). This is where I have a problem.
I ran dbstart as oracle805 (installation account), but I have no
idea whether or not I really started the database. ps -aux did
not yield any clue.
I also tried svrmgrl and "startup", but the file "initXXX.ora"
did not exist, so I copied the existing "init.ora" to
"initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log gave
me the following:
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
So, in other words, I have no idea whether or not I have
successfully installed Oracle. All insights are greatly
appreciated.
Thanks a bunch...
Anh
nullPhan Anh Tran (guest) wrote:
: Hi all,
: I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
: However, I am running into a couple of post-installation
: problems.
: 1. root.sh (sucessfully ran).
: 2. glibc patch (successfuly ran). There were a few errors on
the
: screen with the "mv" commands (file does not exist). Is tha
: alright?
: 3. catrep.sql (problem). This is where I have a problem.
: I ran dbstart as oracle805 (installation account), but I have
no
: idea whether or not I really started the database. ps -aux did
: not yield any clue.
: I also tried svrmgrl and "startup", but the file "initXXX.ora"
: did not exist, so I copied the existing "init.ora" to
: "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
gave
: me the following:
: ORA-00202: controlfile: 'ora_control1'
: ORA-27037: unable to obtain file status
: So, in other words, I have no idea whether or not I have
: successfully installed Oracle. All insights are greatly
: appreciated.
: Thanks a bunch...
: Anh
Hei !
I also did this fault :-( See this webpage - it's excellent
and describes everything.
http://jordan.fortwayne.com/oracle/rh6x.html
null -
Post - Installation SAP R/3 4.7 - Urgent !!
Hi All,
I have installed SAP R/3 4.7. I would like to know what are the post-installation steps involved in it. I went through the installation guide. But, I am not able to understand the details provided in that. Can somebody tell me what are all the steps involved as a part of the post installation.
Kindly Help !!! Its urgent !!
Regards,
Rose.Hi,
Initial Consistency Check
SM28
Edit Batch Jobs
Workbench Organizer Reconfiguration
TMS Configuration
Import Printers
Client Configuration
SCC4
Set System Change Option
SE06
STMS
SCC7
SM37
Deleting Source System Profiles
RZ10
Reconfigure Operation Modes
RZ04
Delete Update Failures
SM13
Delete Batch Input Sessions
SM35
Reorganize Spool
SPAD
SP12
Delete Invalid Background Control Objects
Restrict Outgoing Email and Faxes
SCOT
Adjust RFC connections.
SM59
Adjust Logical Systems names
SALE
Hope this helps.
Cheeers
Deepanshu -
SCM Dialog instance installation, post installation activity for livecache
Hi All,
We have installed SCM 7.0 Central instance with Livecache server. Now we have successfully installed additional application server (i.e. Dialog instance) for this SCM 7.0 system.
We need to know
After installation of SCM 7.0 Dialog instance what are the post installation activities?
How we should integrate the livecache server with the Dialog instance which is installed on different hardware.
We need to know how livecache server understand that the additonal application server ? Is there anything to do in LC10?
Please reply
ThanksHi Ashley,
Thanks for your time.
Since i am installing app server, the SAP<SID> group will have to be online on this node. There is another group containing shared drives for components for livecache. This is also required to be online on node 2 for app server installation.
The only cluster resource I can move back to node 1 is ORACLE<SID>. Tried doing that, but no luck.
Any one here facing similar issue during SCM dialog instance installation in MSCS environment?
Regards,
Kiran -
Post-Installation Process Error (Template Base)
Hi Experts,
I try to run template base post-installation process in client 100, we never run post installation process in client 001 (Which is recommended before making the client copy), while doing template base post-installation process failed (got error) at PIPostInstallProcess step 7 u201CAdd Installed Product2u201D I move further and then it failed at step 19 (u201CConfigure the Role of the Integration Serviceu201D) and 20 (Register Queues) same process. It failed at number of process, so what I did I move to manual post-installation process but I stuck in the step were we need to import exchange_profile.xml because I can not see this file at sap\BX0\SYS\global, is this file being deleted by template base post-installation if yes then how to recover it?
Without this file i can not complete the manual post installation process...:-(
With Regards
Sunili think we do not need exchange_profile.xml file in 7.0 post-installation. ok i skip that step in post-installation now when i created LCRSAPRFC_BX0 in Visual Admin services->JCo RFCProvider and try to start it, it is throwing an Error.
I am using user "PI_JCO_RFC" has respective role assign to it.
I am not sure whether i am providing correct value to these filed or not
Gateway Host
Gateway Service
Application server host
System Number
Client
can somebody send me detail about these fields
With Regards
Sunil
Maybe you are looking for
-
I get an error -3259 when trying to download an app. (And ONLY certain apps!)
Ok, this is really weird. At first I thought it was my firewall, because I just installed it, and now iTunes wasn't downloadinf anything. But i've come to realise that there is nothing wrong with my firewall, or router...it's iTunes! You see, I didn'
-
HT1349 my iphone went dead and wont charge at all, please help :(
my iphone went dead and wont charge. I tried plugging it on the wall and via the usb to my laptop but still no luck. any suggestions on how to make it work?
-
Hub Manager - what is MAIN?
We have recently used the home hub manager to restrict access to an over zealous teenager. We have just blocked everything we know is his plus half a dozen things that just have a code but which seem to be his PS3, PSP etc. There is one item on th
-
What are the steps to share photos in iOS 8
Shared Photostreams worked in iOS 7 but the invitations aren't sending now, with one exception. Also the phone won't send attachments via email - only text - so not sure if current problem is pilot error or the phone itself. Thus I'd like to get the
-
Screen shows when ALT key is pressed
Hi, For some reason, photoshop CC has started showing a big ugly ALT next to my cursor when I press the ALT key. I dont want this! It gets in the way. Im not sure how I turned it on, and would LOVE to know how to turn it off. Many thanks! G