SSD Recommendations & general questions

Hi guys,
so i want to buy a bigger SSD for my mbp early 2011,
i want to get the Samsung 830 series 256 GB,
please tell me (those who have it) if its good or bad did you have to enable TRIM, any problemss, complains, advices....
or just say what SSD you have and if you happy with it.
cheers
Leon

Hi,
I could instal WIN7 on the original HD moved in the optical bay using a USB stick containing the Win 7 Pro installer disk. This was succesfully done on a mid 2012 MBPro after removing the SSD installed in the original HD bay. I could reboot and launch Win 7 with no problem.
But when i replaced the SSD in the HD bay i could no more use Bootcamp to launch Win 7...
This was working on my previous MBPro early 2011 with a major difference: to install Win 7 i had to replace the SUPERDRIVE and use the DVD WIN 7 installer. But after the succesful installation i put the original HD with it's Bootcamp partition in the NewmodeUS optical bay and a Crucial SSD in the original Drive Bay... This was working without any hitch. The only issue was when Windows get corrupted, i had to open the case and reinstall the Superdrive to be able to fix the Windows mess and restore a previous working image...
The new MBPro mid 2012 has USB3 and works nice with a USB Stick, that is very handy to fix Windows when crashed without having to reinstall the SUPERDRIVE.
The only issue i have is that after reinstalling my SSD in the original HD bay i'm no more able to reboot Windows since i get the flashing point on the upper left corner on a black screen...
I will try to put the original disk in it's original bay while moving the SSD to the optical bay.
I hope it will fix the issue...
regards
Bernard

Similar Messages

Newbie question - general question about e-mail sync

Hi,
I have a general question about email sync and BlackBerry smartphones. Are there any devices that allow email syncing with a Microsoft Exchange 2007 system that do not require the BlackBerry Enterprise server?
Thanks; sorry if this has been asked before but I was unable to find it in the forums, documentation, etc. Everything I found assumes that for this kind of environment you will be using a BlackBerry Enterprise solution, but I can't assume.
Thanks again.
Solved!
Go to Solution.

Hi and Welcome to the Forums!
If the Exchange server has anything that faces the internet (OWA, POP, IMAP), then BIS can be used to handle email (only email...calendar and contacts require BES to sync OTA).
Or, a PC, inside the network (but with an internet path) and logged into the email server (using Outlook), can be left running, using the RIM Desktop Software's Desktop Redirector capability to forward messages to the BB.
Those are basically the options.
Hope that helps! Let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Messaging 6.x general questions

hi,
just some general questions -
(a) is there a netbackup agent for doing messaging backups and message level restores (e.g. like the one for exchange). I know solstice backup has a backup agent somewhere but not sure about netbackup. any experiences with this?
(b) is it possible for messaging/calendar to authenticate users off a different directory? i.e. just use the uid/password info from another directory i.e. novell edir. it seems like directories and ldap were supposed to make all this simple, but getting a product like messaging that is "supported" against another directory isn't in reality.
Also organisations don't seem to like having to only use messaging against sun directory as a selling point sometimes when they already have a directory. Any thoughts/experiences?
thanks

A: imsbackup may be used with many backup packages. Granularity down to the individual user. Imsbackup/imsrestore is the recommended backup/restore technique.
B: No. Messaging Server was not designed to store part of the authenticatio data in one ldap and the rest in another. You could use Meta Directory to synchronize a portion of your other ldap to the one Messaging uses.
Some customers have successfully deployed against other Directory server, BUT . . .
1. The installer uses non-standard, propriatary stuff, and will fail against non-sun directory servers.
2. If there is a problem after ou successfully get install done, and you call tech support, the burdon is on you to prove that the problem is within how Messaging Server works, and is not with the non-sun directory server. So far, we haven't found any such to fix, though. I think there may be one or two customers using non sun DS.
In most cases, Meta is able to sync their ldap system with ours, and that works much better. Directory Server is the most popular LDAP server around, far as I know.

General question regarding "parallelism" of iPhone execution

I've got a general question and hope somebody can shed some light on this.
While I'm relatively new to iPhone development I've been in software programing for more than 15 years now and have a solid background in Java, C, C++, C# and other languages. I've created a couple of applications for the iPhone, easy and complex ones, some using UIKit, others using Open GL and Open AL. With that said I think it would be fair to say that I know pretty much what I'm talking about.
For those who tend to refer everybody back to the Apple Samples or PDF guides, please believe me, I've read them all.
Here's my "question":
I occasionally ran into a situation where I got the impression that code on the iPhone got executed in a "non sequential" or "parallel" manner even when I did not explicitly created threads. I'm not referring to code buried in a framework or so, I'm talking about code I've written. (English is not my mother tongue, so please excuse me if my explanation might be somewhat difficult to understand.)
I try to give an example. Assume a code snippet like this:
_gameEngine = [GameEngine alloc];
[_gameEngine initSomeStuff];
In my understanding the second statement (the initSomeStuff) gets executed once alloc returns and _gameEngine for sure is a valid pointer. Is that fair to say? I sometimes got the impression that the iPhone starts executing code without waiting that a method returned.
I had similar issues when I tried to show an ActivityIndicator while another method was doing a lengthy operation. Pseudocode like this:
[_activityIndicator show];
[self longLastingOperation];
[_activityIndicator hide];
In code like the one above: Can I be 100% sure, that the hide message is not sent until longLastingOperation returns? I ran into a situation where I had the impression that show and hide got called immediately without waiting until longLastingOperation returned.
Final example:
[self performSelectorOnMainThread:@selector(doSomething) withObject:nil waitUntilDone:YES];
[self nextStatement];
-(void)doSomething {
[self longLastingOperation];
1.) In the above code, I understand the idea is that doSomething will be executed on the MainThread and that nextStatement will in no way be executed before doSomething has returned. Is that true?
2.) doSomething is supposed to run on the MainThread but does this hold true for longLastingOperation, too? Or could it be that longLastingOperation WITHIN doSomething gets dispatched to another thread and doSomething returns PRIOR to longLastingOperation been finished?
This might all sound pretty wired but as I said from time to time I ran into a situation where I got totally confused as to how stuff executes in – or out of – sequence. I helped myself with using NSNotificationCenters etc. but I'd like to understand what's going on in detail and crystal clear here.
Your help is more than appreciated.
Thanks,
R.
Message was edited by: BeSharp

It is never safe to assume that any allocation was successful, and while it's incredibly unlikely that you're running into any such situation, it's entirely possible for a formal protocol to declare that a given message send should return immediately without waiting around:
http://developer.apple.com/documentation/Cocoa/Conceptual/ObjectiveC/Articles/ch apter13_section_8.html#//appleref/doc/uid/TP30001163-CH9-BAJIGHAF
An "impression" doesn't prove much unfortunately, so I'd recommend getting friendly with the debugger to see what's really going on.

General question on SQL Server 2000 to Oracle 10g

Hello all,
I just have a general question on migration from SQL Server 2000 to Oracle 10g using SQL Developer.
How does it migrate Users with proper privileges from SQL Server to Oracle? Follow the interface steps? Or should the users be created on destination Oracle side?
Thank you.

Hi,
It depends which type of migration you are making.
For a 'Standard' migration when you migrate data a 'create user' statement is created as part of the migration and you will see this in the generated code.
If you are using the 'Quick' migration option then you need to create the Oracle user or use an existing user to receive the data.
Your best option is to review the documentation available from -
http://www.oracle.com/technology/tech/migration//workbench/index_sqldev_omwb.html
or directly from -
http://download.oracle.com/docs/cd/E12151_01/index.htm
and then get back with specific questions if this does not give you the information you need.
Review the chapter -
2. Migrating Third-Party Databases
in -
Oracle® Database SQL Developer User’s Guide Release 1.5
Regards,
Mike

Report Builder Question - OA AR Aging - and a general question

I'm sure this is the wrong forum for this question, but I thought there might be someone here who might be using Oracle Applications and Report Builder who'd be kind enough to help me out.
We've recently implemented Oracle Applications 11.5.10 and I have to use report builder to change the Accounts Receiveable Aging (7 bucket) to a 5 bucket report. I've already made some changes to the seeded "ARXAGMW.rdf" report, but I'm not a big Oracle Reports guy. I've stumbled through making some changes in various other reports. But this one is just plain nasty! :)
I was thinking that I could simply add buckets 6 & 7 to bucket 5, then just hide or delete the 6 & 7 buckets. But I'm not sure where to even start. Any help with this would GUARANTEE a Christmas or other holiday card this year! :)
I really want to keep this simple as possible, so any help would be very....helpful. :)
Oh, my general question is: Are there any resouces/books for Oracle Reports (Report Builder)? I feel so lost trying to modify existing reports, let alone creating new ones.
Thanks again!
Steve

Hi Steve,
I am working on the 7-bucket aging report and i want to add a new field in data model.
As the query is build dynamically, i have modified the function BUILD_CUSTOMER_SELECT to meet my requirements.
But the problem is that in the data model, the field is not present in my Grouping. and if I try to add the field in the Data Model query (Q_ Customer) section,
i get the following error: ORA-01789: query block has incorrect number of result columns.
The query is as shown below:
select rpad('a',50,'-') short_cust_name,
0 cust_id,
rpad('a',30,'-') cust_no,
rpad('a',500,'-') sort_field1,
rpad('a',40,'-') sort_field2,
0 payment_sched_id,
rpad('a',32,'-') class,
sysdate due_date,
0 amt_due_remaining,
0 days_past_due ,
0 amount_adjusted,
0 amount_applied,
0 amount_credited,
sysdate gl_date,
'x' data_converted,
0 ps_exchange_rate,
0 b0,
0 b1,
0 b2,
0 b3,
0 b4,
0 b5,
0 b6,
rpad('a',25,'-') bal_segment_value,
rpad('a',500,'-') inv_tid,
rpad('a',32,'-') invoice_type
, 'y' parent_cust --I WANT A NEW FIELD HERE TO BE VIEWED ON THE REPORT LAYOUT LATER
from dual
where 1=2
UNION ALL
&common_query_cus
Did i missed somthing 4 me to be able to add the field here?

General question about iTunes Match and multiple libraries

Hello to everyone,
I have a general question about the iTunes Match service, which is available since yesterday in my country (Italy). Currently my library situation is the following:
Computer A (desktop, Windows 7): "big" iTunes library (about 20 GB), at the moment not associated with my Apple ID
Computer B (MacBook Air 2011): "small" iTunes library (about 5 GB), associated with my Apple ID
At the moment, both my iOS devices (iPhone 4 and iPad 2) are synchronized with the smaller library on the MacBook Air.
Question is as follows: should I subscribe to iTunes Match, would it be possible to upload the "big" library (provided I associate it with my Apple ID) to iCloud while keeping my devices synchronized with the "small" one?
Ideally, at the end of the day, the situation should be the following: both iOS devices with music from the small library + possibility of downloading songs from iCloud (coming from the big one). Is this possible?
Maybe the question sounds stupid, but I want to be sure about this before paying for the service.
Thanks a lot.

Yes, you could also associate your larger library with iTunes match if you associated your Apple ID with it. However any purchases in the library made from another Apple ID will not be matched with iTunes much.
If both libraries are part of iTunes match, then all your devices will see all of the content from both libraries, which content you choose to have on those devices and which you have accessible via iTunes match is entirely up to you.

General Question on Proxies

Hi,
I have few general questions....
How to decide which proxy to be used: Java or ABAP?
What are the deciding factors?
Which one is better when it comes to performance?
Regards,
Rajani Kumar

bump

Where to direct a general questions about foreign films subtitles?

I recently purchased a foreign film "Break Ke Badd" from the iTunes store. Although, it didn't specify that it had English subtitles, I assumed it did. After the full download, I tried to watch it and there weren't any English subs. I contacted iTunes and they more than happy to refund the money back to my account. Now after a few weeks, the iTunes store DOES list Eng subs for this film. I don't want to purchase it again and have to contact iTunes for another refund...Therefore my question is, is there a general question contact one could use to find an answer to my question. Basically, to verify that this movie, indeed has English subs before I re-purchase.
Any info is appreciated!

Yes I know as the [https://support.mozilla.org/en-US/questions/ Questions] section is more for desktop Firefox support and the place I linked to is for "Firefox OS" support in English where some who are involved with it do post in it occasionally.
I would have moved that [https://support.mozilla.org/en-US/questions/962783 thread] to the "Firefox OS" English section, however I cannot as the [https://support.mozilla.org//questions/ Questions] and [https://support.mozilla.org/forums Contributor Forums] are not the same.

Camileo charging problem (solved) and a general question!

Hi all!
First of all, I was going to ask for help as to why the Camileo S10 was not charging (the orange light wasn't flashing), and I'd seen a few people with similar problems.
The solution?
Give the contacts on the battery a clean.
The insulation sticker that comes on it must leave some kind of residue on it, and it's enough to prevent charging. Now it's flashing away happily :]
So my general question was, is it possible/advisable to use the camera on the mains?
Rather than constantly draining and charging the battery during long shoots, I'd prefer to just leave it plugged in!
Thanks very much in advance!
Paul

Hi
I think the battery handling is always the same no matter what product it is
From time to time the battery should be recalibrated.
This means that the battery should be discharged fully and after then you should charge it again until the battery would reach 100%
I do this with all my batteries; mobile phone battery, digi cam battery and notebook battery.

Update on Bioinformatics WIKI, scripting challenges, and a general question

I am waiting for my site to go on-line at Oak Ridge National Labs (USA, Tennessee). Should be another week or so, maybe less.
When that happens, you will see a veritable explosion of scripting challenges in my wiki (Emerging Technologies->Bioinformatics.)
One general question in preparation for these challenges.
There are a number of standard bioinformatic programs that can be run interactively via the web at various sites, e.g. "BLAST" and "STRIDE".
Although these can also be run locally, this requires that you download large databases and keep them updated.
So here's my question to the scripting experts:
Are scripting languages powerful enough to submit queries to web pages and then use regex's to parse the html that is returned?
Bill Mann has used PERL to do some of the required regex parsing, but there is a lot left to do, and, his stuff only works when a perl program is invoking a bioinformatic program locally, not interactively.
If so, we all can do some beautiful stuff together , if anyone is interested ...

...my wiki on...
There is by it's very nature no such thing as MY WIKI, except you run your own wiki project in an exclusive mode. Which were...well ... unusual.
Are scripting languages powerful enough to submit queries to web pages and then use regex's to parse the html that is returned?
Yes.
anton

Delete scriptcode - General question: capacity limit of Acrobat Windows

Hello everybody,
I've got a general question to the capacity limit of Acrobat Windows.
I often make forms with
for instance the current one has 18 pages. Eleven pages have fields on it. (But some pages have only one field on it) The fields of one page to another are sometimes linked with script code. The file needs nearly 1 MB.
Usual I write the script code by a double-click on the field/ calculate/ custom calculation script. (Is this the right way?) Today it happens again that a field with script code lost the script code.
That's why I wonder whether there is a capacity limit of Acrobat Windows or whether I make mistakes. (This is only one instance of several where the form has his own life.)
Thanks in advance for helping me!

http://forums.adobe.com/community/acrobat/acrobat_scripting

SAP GRC Process Control - General Questions

Hi all,
We have the following general questions regarding SAP GRC Process Control:
1) Assume that we have set up 5 different SAP Connectors in Process Control. When you configured a specific rule and control and then, schedule the job for such control, how does the system (SAP Process Control) knows which back-end system needs to be accesed for such control?
2) In which language are the out-of-the box rule steps's script coded? In which different languages can those scripts be coded, what is to say, in which language can we code our own scripts?
3) How is the detailed flow between SAP Process Control and SAP Back-end system?
Many thanks. Regards,
Imanol

null

General Question re logical workflow (Multiple Products/Sales Teams)

Currently we are upgrading from a highly customized CRM environment developed in CRM 4.0. We are hoping to move to an out of the box solution with 2015.
But I have a general question. We are a service company with different sales groups for each of our products.
Currently we have customization for each service so a Sales person is assigned to a specific product for the customer.
So my question is, how is this handled out of the box. I am sure there are many many many companies in the same situation.
So say 10 products with sales group for each product.
Then a customer with multiple departments. Each sales group needs to contact the specific department.
So a customer could potentially have 10 different sales people contacting different people in the customers organization.
How do you know when someone has already made contact?
If we just look at the activities it is not very clear that contact has been made for a specific product.
Even with our customizations, there have been many situations where 2 sales people contact the same person at a clients office and we end up looking very unorganized.
Any thoughts or comments are appreciated.
If this is not the right place to post this type if discussion, please redirect me.
Thanks

As an example, for 37-minute sequence of footage (made up of multiple clips) it's taking 50 minutes to first export a non-self-contained, time-code-reader-filter-added Quicktime.
Did you render fully before you exported? That helps. But this is also a GOP format, and it takes longer to do pretty much everything, as it is a processor intensive format.
1) How much more memory would help this work flow go faster, and approx. how much faster??
None. RAM doesn't come into play here. PROCESSOR speed is all that matters. What will make it go faster is enabling QMaster to have Compressor access all cores of the processor. Or getting hardware to help with the compression, like the Compress HD from Matrox. But that only boosts encoding to H.264.
2) Has anyone else done this type of work-flow, and been able to do it more quickly? Is RAM the issue? Any suggestions for a more efficient work-flow?
RAM isn't the issue. Faster Processors, hardware boosting...converting the footage to ProRes before you begin editing...all help.
RAM isn't what is hindering you here.
Shane

Business Objects Training -General Questions

Hi,
I am just Going through the Business Objects...had some few general questions.
1)What is the current Version on BO
2)Where does Crystal reports & Xcelsius fit in Business Objects
3)Does Power Center & Informatica are also included in Business Objects
Thanks

The latest version of Business Objects Enterprise is XI Release 3.1 Service Pack 2. There have been several fixpacks delivered on top of this as well.
Crystal Reports and XCelsius are tools to build Reports and Dashboards respectively. While XCelsius is suited for creating sleek dashboards with very aggregated data - usually less than 2000 rows per report, Crystal Reports can be used for reporting off data warehouses requiring reporting off large data sets.
Informatica Powercenter is a tool proivded by an independant vendor and is not a Business Objects Product. Business Objects Provides Data Integrator, which is pretty much as rugged as Informatica and provides all the functionalities of ETL(Extraction Transformation and Loading).

SSD Recommendations & general questions

Similar Messages

Maybe you are looking for