SSD's not working/ being detected - Windows install errors on HP Dv6-1149wm laptop

Question

Okay, well I have tried three different brand new ssd's: 1. kingston v300 120gb SSD, 2. samsung 840 120gb ssd, and 3. another kingston v300 120gb SSD. Tried in that order.
The Kingston drives- Were not detected at all by the bios no errors or nothing, nada. When attached to a different computer running windows the drives are detected fine. nothing wrong there.
The Samsung drive- This was the second drive I tried. It was detected by the bios but diagnostics gave me the "303 quick" Error. When installing windows through a USB, it would ask me for drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition it or format it. Not even partitioning the drive through command prompt using diskpart worked. It would return an error saying incorrect parameter or something like that (Note I was able to partition the drive here but not format to ntfs).  I could manually partition it on another system all the way. Formating/partitioning via a different system allowed me to get all the way into the installation up until the point where it says "installing features" then it gives me an error saying it was unable to set the system local - or something like that. On top of that I also tried installing windows on the other system which worked great but would not transfer over to the laptop. I also tried cloning the previos drive onto the ssd but when booting up the computer gave me a disk read error.
My personal desktop drive(OCZ Vertex 4 128GB)- This one worked fine. Computer diagnostics picked it up fine and didn't report errors. The only thing is I didn't try installing windows on it because I already had an install there.
My thoughts- My best guess is that there is some sort of incompatibility with the drives firmware and the computers BIOS. The Bios (Insyde h20 F.21) is very limiting to begin with, too user friendly and not much to do there, second it hasn't seen an update since 2011. Seems to me like SSD technology might be advancing quicker than HP can keep up with their updates (This of course assuming its the BIOS that is at fault)
I am open to ideas suggestions, basically anything that can help me out at this point. I've spent many hours on this and I have turned out empty.
This question was solved.
View Solution.

Answer 1

Computer_World wrote:
Okay, well I have tried three different brand new ssd's: 1. kingston v300 120gb SSD, 2. samsung 840 120gb ssd, and 3. another kingston v300 120gb SSD. Tried in that order.
The Kingston drives- Were not detected at all by the bios no errors or nothing, nada. When attached to a different computer running windows the drives are detected fine. nothing wrong there.
The Samsung drive- This was the second drive I tried. It was detected by the bios but diagnostics gave me the "303 quick" Error. When installing windows through a USB, it would ask me for drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition it or format it. Not even partitioning the drive through command prompt using diskpart worked. It would return an error saying incorrect parameter or something like that (Note I was able to partition the drive here but not format to ntfs).  I could manually partition it on another system all the way. Formating/partitioning via a different system allowed me to get all the way into the installation up until the point where it says "installing features" then it gives me an error saying it was unable to set the system local - or something like that. On top of that I also tried installing windows on the other system which worked great but would not transfer over to the laptop. I also tried cloning the previos drive onto the ssd but when booting up the computer gave me a disk read error.
My personal desktop drive(OCZ Vertex 4 128GB)- This one worked fine. Computer diagnostics picked it up fine and didn't report errors. The only thing is I didn't try installing windows on it because I already had an install there.
My thoughts- My best guess is that there is some sort of incompatibility with the drives firmware and the computers BIOS. The Bios (Insyde h20 F.21) is very limiting to begin with, too user friendly and not much to do there, second it hasn't seen an update since 2011. Seems to me like SSD technology might be advancing quicker than HP can keep up with their updates (This of course assuming its the BIOS that is at fault)
I am open to ideas suggestions, basically anything that can help me out at this point. I've spent many hours on this and I have turned out empty.
Hi,
I suggest to read this thread:
http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/probook-6560b-does-not-recognize-my-SSD/...
Your thoughts are exactly the same as mine. The motherboard doesn't like the firmware or the controller on the SSD.
This manual says that AMD doesn't support SSD:
http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*