SSF error: Invalid signer, Message no. 1S005

Hello Everyone,
We are in the process of configuring the content server in our customer's landscape.
Post the definition of content repository and the associated storage category,in the CSADMIN section,in the certificates tab, an error that reads SSF error: Invalid signer, Message no. 1S005 is thrown up whenever we attempt to send the certificate.Toggling values of 'Security' and ' Check Signature' fields doesn't help either.
Could anyone shed light on this issue and possible solution?
Note:We have not enabled/configured digital signature strategy and all the previous posts in the forum on this topic are in-conclusive.
Regards,
Pradeepkumar Haragoldavar

Dear Pradeep
The error message "Invalid signer" actually exactly means what the
message text says: the system where the error occurred was unable
to verify the signer of a signed document, most likely because the
related certificate could not be found.
Please check the following:
- Does a PSE exist on the signing system for the intended purpose?
(check: communication with a content server) (TA STRUST)
- Does PSE use a subject name that consists of 7bit ASCII
characters only?
- Has the certificate been distributed to the receiving system ?
Which security toolkit do you use (SAPSECULIB or SAPCRYPTOLIB)?
Please check the version of your installed security toolkit (TA STRUST,
menu "Environment > Display SSF Version").
Please also check for any error messages that may occurr at the
SSF initialization phase (ST11)
if you are using SAPCRYPTOLIB for SSF, please see note 662340
Regards
Tushar Dave

Similar Messages

PCUI Error(SSF error : Invalid signer)

Hi All
we have implemented the PCUI functionality in portal thru CRM 4.0 Business package. all bsp pages are working fine.
but when i click on the activities link in portal and then i selected one particular order documents in Activities page , when i click to open that documet then it is opening in the new window with the error
"<b>SSF error : Invalid signer</b>"
but when try to open the same document in CRM system it is opening fine.
( Actually documents are created in different formats like PDF,CSV and XML)
Can you help me how to solve this "SSF error:Invalid signer " in portal for Activities link in PCUI application
Regards
Sunil

Hi,
I am facing the same error in OAC0 although the connection to the external Documentum Server is successful as shown by Test Connection.
Can anyone suggest either the possible reasons or a solution to this.
Note: I have tried to tick/untick the "No Signature" box.

Error Invalid Number message when sending text

Ever since I upgraded to an iPhone 5s I get an Error Invalid Number message when sending a text to a phone number that used to work just fine from my 4s. In fact I can receive a text from this number but when I try to reply to that text I get the error message again.
I deleted the contact info in case there was something broken there and I'm trying it with just the raw phone number but without any luck. What can I do? It's my boss's number so it's important I fix this problem. All other contacts and texts are working just fine, it's just this one phone, a Samsung galaxy on T-mobile if that helps.

I am having the same exact issue with my Nokia Lumia 920 Windows phone. I was texting my son this morning when one text immediately returned a "+1 (112) 161-1611 Error Invalid Number. Please re-send u sing a vlid 10 digit mobile number" message. His contact info looked fine, but I edited it, re-saved it and tried texting again. Same result - except the number reported in the error message showed 2 "1s" in front of his mobile number. I was able to text my wife a couple of times to report this to her and then it happened with her number in exactly the same manner. I am still able to text people I work with - so this leads me to believe it has something to do with phone numbers that have been saved outside of my corporate contact list. I will be monitoring this posting to see if there is a fix.

SOAP Receiver via https - Error: Invalid SSL message, peer seems to be tal

Hi,
I have a SOAP Adapter that send a message to a HTTPS WebService.
I'm having the following error:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Invalid SSL message, peer seems to be talking plain!: iaik.security.ssl.SSLException: Invalid SSL message, peer seems to be talking plain!
If I check the URL via Internet Explorer it showme a confirmation dialog with a security Alert, and ask me if I want to continue, then, I can reach the WS with any problem (from de IE).
I checked the steps of this PDF:
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
and all seems to be right.
Any bode can help me with this problem?
Thanks
Martin

Hello,
finally you run your request from your ERP System about your ICF.
To establish a SSL Connection to the Web Service target system about an SAP WebAS and ICF, it is necessary to create a certificate on client site about Internet explorer using target URL and importing it on STRUST. Take the junction "SSL-Client (Anonym)" to include your certificate for your system.
Take a reboot of ICM Monitor.
Then create a HTTP Connection to rhe external server via SM59 (Typ G).
Don't forget to configure the following points:
Under the menu tab Registration&Security:
- Registration Process: No Registration
- status of security protocols: activ and ANONYM SSL-Client (Anonym)
In most cases, you don't need to edit your user data.
Mostly only then one can usually connect about SAP XI or PI to some servers with SSL method.

Error "Invalid SSL message, peer seems to be talking plain" receiver SOAP

Hello All,
I have configured the AXIS as the receiver adapter, and sending an invoice over HTTPS protocol. The Call is a synchronous process where I get a response back from the service provider.
Getting the error message as below, the authentication is a simple user ID and password authentication. The same URL works well in Test environment but having this problem on deploying to production.
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: iaik.security.ssl.SSLException: Invalid SSL message, peer seems to be talking plain!</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any suggestions where I should be checking the configuration.
Prashanth

Hi Glenn,
My scenario is a File-to-SOAP scenario, the receiver communication channel is an synchronous external webservice call over SOAP adapter.
Screen shots of the communication channel config are as below
[CC Parameters|http://yfrog.com/h0bx67j]
[CC Modules|http://yfrog.com/h025s5j]
--Prashanth

Error Invalid Number message in texts.

I thought I fixed this problem a month ago per another discussion's suggestions.
I had been getting the "+1(1)216116-11 Error Invalid Number Please re-send using valid 10 digit number" message even though the numbers were 10 digit.
I deleted the contacts and texts. Updated software to current iOS 7.1. Powered off then back on. Then re-entered the info.
It worked until this morning with the same 2 random contacts. But it is my son and best friend. So now I am frustrated.
I have checked more discussions and the fixes seem to be random as well. Does anyone have any new ideas?

I had this same issue to a number I had been texting daily for months! After I tried everything--I figured it out! Even after I deleted the contact and set it all back up again, it still wouldn't work and I would get the "+1(1)216116-11 Error Invalid Number Please re-send using valid 10 digit number" error message. BY chance, as I was typing in the number for a new trial text, the number popped up from "recent history" (the list of all recent texts to that number or name). Even though I had deleted ALL texts to and from her and all contact info, the number was still stored elsewhere. It dawned on me that her number and her contact info was stored in the memory as "recent text history". I had to delete every instance of a text that had her number in it (including group texts), then when I reentered it, it worked! I believe the whole thing started when someone had her incomplete number in a group text, and from then on, it was getting her number from that recent text instead of mine! I found it by accident and there HAS to be an easier way, but here are the steps:
1. Delete the name and number from your contact
2. Start a new text by typing in the first letter or so of the person's name (or the digits of the number) and they should still pop up in a drop down box
3. Instead of selecting it for the text recipient, select the little "i" beside it and a new menu will pop up (that is the RECENT menu)
4. Select REMOVE from the top right corner
5. Do this for every instance with the name and number in it
6. Try a new text--nothing should pop up when you enter the number if everything is removed. It should now work
Hope this helps someone else!

SSF error

Hi,
We are creating some Adobe Interactive forms and storing them on server. Using the abap code we are generating an url pointing to the specific stored pdf and passing back to the java program to display it on the page. While opening the pdf through the url link, we are getting an error saying
SSF error: Invalid signer
Any clue what could be the reason?
Thanks,
Sujit

Hello Sujit,
Regading SSF error:
This status indicates that an external security product has been installed and that a system PSE exists on the application server; however, the system PSE can not be accessed. The most common cause of this error is
that no credentials exist on the application server. Use the function Create credentials to correct this error.
For Create credentials for the system PSE Use menu path->
" PSE -> Create credentials" The application server needs credentials to access its system PSE. Although credentials normally exist for an application server, occasionally you may haveto create new ones, for example,
for a newly configured application server that has not yet accessed its system PSE.
Hope this will help you.
Thanks
Anirudh Saini

Had Lion 10.7.3 and spctl enabled, after upgrading to 10.7.4 i got this error message: 'error: invalid API object reference'

I had Lion 10.7.3 with spctl enabled, few days ago i had thru Software Updates > Upgrade to 10.7.4; i upgraded but this time when im trying to install an program i have the message that producer is not signed or software was from AppleStore so i tried to disable on Terminal, but i got this message:
'error: invalid API object reference'
i guess now i cant install anything because either i want to enable or disable the result is the same.

I have this same trouble with an IMac, was also 10.7.3 with spctl enabled, and after upgraded to 10.7.4, i cant install anything.

Error: Invalid Password when trying to sign in on any wireless devise

Error: Invalid Password when trying to sign in on any wireless devise
I even reinstalled my WRT110 to be sure of the Network Name and Password but I still get this error. I have never been able to log in to the wireless network. I can see it - Ienter my password and still "Invalid Password"

I don't understand this: Connect directly to the router. Is this the http://192.168.1.1?
I HAVE changed the network name, I HAVE changed the password.
I still get invalid password!!!
I am extremely frustrated by all this. I need simple instructions. I followed them when I set the friggin thing up, I reinstalled. I know what my friggin password is - why why why?

RSA1 going to shortdump, ERROR: Invalid GUI input data: Message no. 00123

dear experts,
while executing RSA1 going to short dump, ERROR: Invalid GUI input data: Message no. 00123 in sap-bi 7.0
plz need help,
regards.

John,
Those are the specs of the Software Components, the backend... As we mentioned before, download the latest SAPGUI version and install it in your PC...
The latest SAPGUI can be downloaded from https://websmp204.sap-ag.de/support, go to Downloads, then "Browse the Navigation Area", on the left click "A-Z Index", then click on "G" and you'll see the "SAP GUI FOR WINDOWS" option, click on it...
You can download it from here... Please notice your OSS user needs authorization to do so... Probably need to check with your Basis guys for this...
Hope this helps.
Luis

Keep getting an error message when trying to send some texts to valid numbers, "Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code.

Does anyone know why I keep getting an error message, "Error invalid number. Please re-send using a valid 10 digit mobile number or valid short code. The numbers I'm texting to, are valid numbers.

Did you ever get resolution to this problem?
My coworker has the identical issue, including the number (+1 (1)(216)116-11) in the error reply.

HT204204 Error invalid number when trying to send a TXT message

While trying to send someone a TXT on craigslist, I inadvertently sent a TXT to a 7 digit number. I received back the following message (Where <XXXXXXX> is the 7 digit number I tried to TXT).
I'm using an iPhone 6 (brand new) with the latest iOS. Handoff and TXT message forwarding is set up.
From +1 (1) (216) 116-11:
<XXXXXXX> Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. (The message I sent went her).
After that I attempted to send to the correct 10 digit number but every subsequent attempt to message the correct number has failed. I have tried the following:
Hard reset of the device.
Deleting the conversation
Creating a contact with the correct number
Using Messages to create a new conversation
Replying to messages received from the number.
However nothing I've been able to do resulted in a message getting sent.

I think your region settings are interfering the format of the US number. What country are your region settings set to?
This is how they should look: +1 (216) 116-1122
The +1 is optional when inside the USA/Canada

Why im i getting "an unknown error has occurred" message when i sign into the app store

Im getting "an unknown error has occurred" message when i sign into the app store. I don't have a problem signing into anything else. What could the problem be?

Were you able to find a solution to this issue? I am also getting the 'an error has occurred' message when trying to download or update any apps on my iPhone. Restarted, updated, re-booted, etc etc, nothing has worked.

Error in sending signed messages to trading partners

This is what we are doing:
Setup Host and Trading Partner Delivery Channels with Non-Repudiation of Origin
and Non-Repudiation of Receipt enabled. Upload certificates on Document
Exchange setup. Assign Delivery Channels to Agreement. Transmit outbound
Text error occurs.
Here is the error:
AIP-51083: General failure creating S/MIME digital signature:
java.lang.NullPointerException
at
oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessag
ing.java:1054)
at
oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart
(MimePackaging.java:392)
Everyrthing works fine if we don't have signed messages and secure messages also work.
Is there additional configuration there needs to be done?
Thank you,
Lavar

Hi,
I am not sure what you did. When you export the user certificate from the Oracle Wallet using the Oracle Wallet Manager, it is already in base64 encoded format. Save this file. You do not need to recreate the trading partner. You need to replace the existing certificate with this newly saved file in your host delivery channel. One way to do this is to upload this user certificate in the B2B host page (Click on create under the Certificates section). Then go to your host delivery channel (in the capabilities page) and view your document exchange. Once you are in the Document Exchange Details page, you can see your existing signing credential. Click Update and replace the signing credential with the newly created credential using the user certificate you have exported from the Oracle Wallet. Redeploy and restart the B2B Server.
Regards,
Eng

Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

1. Make sure software is up to date
2. Make sure FaceTime is enabled; Settings>FaceTime
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo

SSF error: Invalid signer, Message no. 1S005

Similar Messages

Maybe you are looking for