SSGD 4.20.909 / Solaris 10 - Sparc / sporadic launch problems

Hy collegs,
after restart of SSGD 4.2.909 an X11 Application via ssh can be launched. After a certain time, it seams, that the ssh does not connect to the application server and tries to login. What I see on the consol is client reject because of wrong or missing X-Auth Cookie.
I increased the JVM tp 512Mb. But still the same problem. It works and after a while it does not.
I checked a lot /network/filesystem space/DNS/ no other behavior.
The question is: Was this one of the know issues in 4.20.909. Was there a work-a-round.
Regards
TAB

Hi,
Some questions:
Is there a lot of load on the SGD server whan it stops working? (lots of users trying to launch apps at the same time, etc?)
After it stops working how do you make it work again? (reboot/restart ?)
Are you launching applications on a 3rd tier or the SGD server?
How are your users logging into SGD - via UNIX authentication or some other method (AD/LDAP?)
Can you post the error in the launch dialog?

Similar Messages

CTM 8.0 Solaris 10 Sparc-64 Installation Problems

I am installing CTM 8.0 on a Solaris 10, Sparc 64 Sun Server/Workstation. I am having a problem installing the CTM, I installed Oracle 9i with no problems(that I know of) with patch 9.2.0.8. When I go to start the ctmsetup.sh it checks for the latest version of JRE, which is fine, however it says that I don't have the Solaris patches for JRE and it lists them. Well the patches I have are more up to date then those listed so when I tried to install the patches they listed it said that they were obsoleted by what I have already. Secondly it gives the message "Starting Cisco CTM Server Installation using Install Anywhere" but then the next line says "You pressed Cancel/Upgrade/Install" when I hadn't pressed anything, and it just stays there. Your help is much appreciated.
Thanks!

Hi, how you setup oracle 9.2.0.8 patch?? I tried
cd /oraclesw9i/Disk1
./runInstaller -silent -responseFile /oraclesw9i/patchset_64bit_9208.rsp but, with key -silent i have an error: cannot communicate with X server, on my WinXP workstation?
echo $DISPLAY > myws:0.0

CF9 w/ Solaris 10 (Sparc, 64-bit): Problems with mod_jrun22.so

Hi
We're running a Solaris (Sparc) box and installed Apache 2.2.16 and ColdFusion9 on our system. When starting ColdFusion the first time, the shell script "apache_connector.sh" installs the mod_jrun22.so (must be the successor of mod_coldfusion.so) and adds the required section in the httpd.conf file just fine. (well, after fixing the script... ^^)
The problem arises when starting Apache next time:
httpd: Syntax error on line 414 of /usr/local/httpd-2.2.16/conf/httpd.conf:
Cannot load /opt/coldfusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server:
ld.so.1: httpd: fatal: libgcc_s.so.1: open failed: No such file or directory
Apparently, this module was compiled with gcc, which we didn't install on our Sun system.
Does anyone know whether there's a module available which doesn't depend on gcc libraries under Solaris?
So far we've compiled everything with Suns compiler Sun Studio 12.0. The reason behind this is that we're using CFX-tags and our shared library uses C/C++ and embedded SQL for Oracle 11g (yes, we're old school ^^). And since Oracle 11g officially only supports Sun Studio 12.0 when using embedded SQL, we're trying to compile everything with this compiler.
Sure we could install gcc (or at least a runtime-component containing libgcc_s.so.1), but I'm wondering now whether we'll run into problems later when using our C++ library which was compiled with Sun Studio 12.0.
Could anyone shed some light on this?
Thanks!
Daniel

We have our EBS 12.0.6 on Sun Solaris SPARC 64 bit. There are few hp printer (hp laserjet p2015dn) configured with our application and they are working fine.
Now we have to add one more printer but ( hp laserjet p2015dn) is not available now.
So please suggest the hp laserjet printer available for Solaris 10 Sparc 64 bit.You already have the same type of printer configured and it is working properly, so I would say it is supported.
What is the difference between the two printers configuration?
Can you print from the OS to the new printer?
What do you mean by "not available now"?
Thanks,
Hussein

Solaris 10 (sparc) disk utilities problems

I'm running Solaris 10 (1/06) on an E450 with 1.5G RAM, 4 300Mhz US-2's. And am having a devil of a time partioning my unmounted spare drives that I'm trying to use to set up Raid 1 and Raid 5. I am logged on as the root user. This is a system I just rebuilt this weekend. I had the same problems with it in the previous build S10 (3/05). I can partition the drives any way I wish during the build process. It's just once I have the server built I can't figure it out.
The drives are a mix of:
Seagate ST336704LC <SUN36G>
Seagate ST336605LC <SUN36G>
I have tried using SMC with the following results: If I try to partition the disks (4 or 7 partitions) the drive manager will let me do 2 or 4 of the partitions then simply cease to proceed when the NEXT button is pushed. Also using the SMC if I right click, then do properties on a partition SMC will hang, also if I doubleclick on any partition, mounted or unmounted.
Using the terminal commands Format, Partition, Modify I can change the size of partitions but this does not allow me to Tag the partitions. I can not configure partitions any other way. If I try to modify the partitions using format-partition-"part#" then save infomation, it will be lost when I exit the terminal session.
Any guidance on what I am doing wrong would be greatly appreciated.
Dave

Found it... was not doing 'label' after making my changes. All better and root mirroring has been successful.
Cheers

Problem with installation application server 10g on Solaris 10 sparc

Hello all.
Help me, please.
I'm trying to install Oracle aplication server 10.0.1.2.0.2 on Solaris 10 sparc.
Server - Sun Fire v210.
When i install oracle infrastructure(metadata repository and identify management),
i have a problem - on first step of configuration "end of communication channel".
Failed
Anybody know, how solve this problem?
Sorry for my english.

There is known bug in installing Oracle10gAS infra. You have to apply the following note during the installation.
see MetaLink Note:330016.1 for current AS 10.1.2 installation requirements for Solaris 10.
Regards,
Amir

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Weblogic 10.3.0 on Solaris 10 Sparc

Hello,
Need Help!!!!
I have installed WL 10.3.0 on Solaris 10 Sparc 64bits and i have this Error:
<May 31, 2010 6:51:56 PM WEST> <Warning> <Socket> <BEA-000444> <Could not load the performance pack that can take advantage of /dev/(e
)poll device due to:
java.lang.NegativeArraySizeException.
Will attempt to use the performance pack that does not depend on /dev/(e)poll device.>
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xffffffff08b04e68, pid=5539, tid=74
# JRE version: 6.0_20-b02
# Java VM: Java HotSpot(TM) 64-Bit Server VM (16.3-b01 mixed mode solaris-sparc )
# Problematic frame:
# C [libmuxer.so+0x4e68]
# An error report file with more information is saved as:
# /app/weblogic/domains/smpftth/hs_err_pid5539.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
Does any one knows how to help me?

Here is the text from the download site from 10.3.3 that applies to 10.3.0 as well:
Note: This table includes links to WebLogic Server installers that include 32-bit JVMs for the platform
in question, and links to WebLogic Server generic installers that can be used on any supported platform.
To use WebLogic Server with 64-bit JVM's on Linux and Solaris or to use WLS on other supported
platforms, use the WebLogic Server generic installer listed under "Additional Platforms". The generic
installers do not include a JVM/JDK. For instructions on using the generic installers, see this document.
So regardless whether the OS is 64bit or not, you need to select the installer on whether you are running WebLogic Server in a 32bit JVM or a 64bit JVM. If you run in a 32bit JVM, you can use the 32bit binary installer for Solaris that has a .bin extension. If you are going to run a 64bit JVM, then you need to download the "generic" .jar installer and separately download the supported 64bit JDK and follow the instructions similar to this, but for 10.3.0.
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14142/guimode.htm#BABGFAAF
On edelivery.oracle.com, select Oracle Fusion Middleware, then Oracle® Application Server 10g Release 3 (10.1.3) Media Pack for Oracle Solaris on SPARC (64-bit)
32bit native Solaris installer for 10.3.0 is Part Number V13618-01
64bit generic installer for 10.3.0 is Part Number V13672-01

How I can emulate Solaris 10 sparc on a Virtual Machine?

Hi for all.
Guys, I need to emulate an environment Solaris 10 in my job. We have an application that just run in this kind of environment. But, I found some problems when I try to install Solaris 10 Sparc on Virtual Box. I think that the problem is the type of architecture that are differents.
So, someone knows a way to emulate Solaris 10 sparc architecture on a Virtual Machine. Doesn't matter the Virtual Machine application (Virtual Box, VMWare, etc..). Somebody Help me?

HI Srini_Chavali
I'm using the Solaris 10 u11.
In fact, Virtual Box supports Solaris u6 and higher. I have an installation of Virtual Box running Solaris x86. But, the problem occurs when I try to create a Virtual machine to work with Solaris 10 Sparc architecture.
The errors that appears on the screen are:
"No bootable medium found! System Halted" and "FATAL: Could not read from the boot medium! System halted"
This error occurs just with Architecture sparc.

Compatible HP laser jet printer for EBS 12.0.6 on Solaris 10 SPARC 64 bit

Hi,
We have our EBS 12.0.6 on Sun Solaris SPARC 64 bit. There are few hp printer (hp laserjet p2015dn) configured with our application and they are working fine.
Now we have to add one more printer but ( hp laserjet p2015dn) is not available now.
So please suggest the hp laserjet printer available for Solaris 10 Sparc 64 bit.
Thanks,
Sharad

We have our EBS 12.0.6 on Sun Solaris SPARC 64 bit. There are few hp printer (hp laserjet p2015dn) configured with our application and they are working fine.
Now we have to add one more printer but ( hp laserjet p2015dn) is not available now.
So please suggest the hp laserjet printer available for Solaris 10 Sparc 64 bit.You already have the same type of printer configured and it is working properly, so I would say it is supported.
What is the difference between the two printers configuration?
Can you print from the OS to the new printer?
What do you mean by "not available now"?
Thanks,
Hussein

SAP 7.0 on SUN Cluster 3.2 (Solaris 10 / SPARC)

Dear All;
i'm installing a two nodes cluster (SUN Cluster 3.2 / Solaris 10 / SPARC), for a HA SAP 7.0 / Oracle 10g DataBase
SAP and Oracle softwares were successfully installed and i could successfully cluster the Oracle DB and it is tested and working fine.
for the SAP i did the following configurations
# clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=01 -p Ci_services_string=SCS -p Ci_startup_script=startsap_01 -p Ci_shutdown_script=stopsap_01 -p resource_dependencies=sap-hastp-rs,ora-db-res sap-ci-scs-res
# clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=00 -p Ci_services_string=ASCS -p Ci_startup_script=startsap_00 -p Ci_shutdown_script=stopsap_00 -p resource_dependencies=sap-hastp-rs,or-db-res sap-ci-Ascs-res
and when trying to bring the sap-ci-res-grp online # clresourcegroup online -M sap-ci-res-grp
it executes the startsap scripts successfully as following
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
stty: : No such device or address
stty: : No such device or address
Starting SAP-Collector Daemon
11:04:57 04.06.2008 LOG: Effective User Id is root
Starting SAP-Collector Daemon
11:04:57 04.06.2008 LOG: Effective User Id is root
* This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
* This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
saposcol on host eccprd01 started
Starting SAP Instance ASCS00
Startup-Log is written to /export/home/prdadm/startsap_ASCS00.log
saposcol on host eccprd01 started
Running /usr/sap/PRD/SYS/exe/run/startj2eedb
Trying to start PRD database ...
Log file: /export/home/prdadm/startdb.log
Instance Service on host eccprd01 started
Jun 4 11:05:01 eccprd01 SAPPRD_00[26054]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
/usr/sap/PRD/SYS/exe/run/startj2eedb completed successfully
Starting SAP Instance SCS01
Startup-Log is written to /export/home/prdadm/startsap_SCS01.log
Instance Service on host eccprd01 started
Jun 4 11:05:02 eccprd01 SAPPRD_01[26111]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
Instance on host eccprd01 started
Instance on host eccprd01 started
and the it repeats the following warnings on the /var/adm/messages till it fails to the other node
Jun 4 12:26:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:28 eccprd01 last message repeated 1 time
Jun 4 12:26:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:46 eccprd01 last message repeated 1 time
Jun 4 12:26:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:49 eccprd01 last message repeated 1 time
Jun 4 12:26:49 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:52 eccprd01 last message repeated 1 time
Jun 4 12:26:52 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:58 eccprd01 last message repeated 1 time
Jun 4 12:26:58 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:01 eccprd01 last message repeated 1 time
Jun 4 12:27:01 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:04 eccprd01 last message repeated 1 time
Jun 4 12:27:04 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:13 eccprd01 last message repeated 1 time
Jun 4 12:27:13 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:16 eccprd01 last message repeated 1 time
Jun 4 12:27:16 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:22 eccprd01 last message repeated 1 time
Jun 4 12:27:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:25 eccprd01 last message repeated 1 time
Jun 4 12:27:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:34 eccprd01 last message repeated 1 time
Jun 4 12:27:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:37 eccprd01 last message repeated 1 time
Jun 4 12:27:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:43 eccprd01 last message repeated 1 time
Jun 4 12:27:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:46 eccprd01 last message repeated 1 time
Jun 4 12:27:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dis
can anyone one help me if there is any error on configurations or what is the cause of this problem.....thanks in advance
ARSSES

Hi all.
I am having a similar issue with a Sun Cluster 3.2 and SAP 7.0
Scenrio:
Central Instance (not incluster) : Started on one node
Dialog Instance (not in cluster): Started on the other node
When I create the resource for SUNW.sap_as like
clrs create --g sap-rg -t SUNW.sap_as .....etc etc
in the /var/adm/messages I got lots of WAITING FOR DISPACHER TO COME UP....
Then after timeout it gives up.
Any clue? What does is try to connect or waiting for? I hve notest that it's something before the startup script....
TIA

How can I install new versions of Fifefox on Solaris 9 Sparc?

I use Firefox 2.0.0.20 on Solaris 9 Sparc, but I couldn't install any verions of Firefox major version 3.
There is a great site, http://www.sunfreeware.com/mozilla.html, that looks it has a possibles version compatibles whit my OS, but the links don`t work.
Any suggestions?
More detail about my OS:
Solaris 9 9/05 HW s9s_u9wos_06b SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
se is subject to license terms.
Assembled 25 September 2006

Hi,
Please also see [http://unixpackages.com/packages/mozilla this] (from http://www.sunfreeware.com/). It looks like 2.0.0.23 is the last supported version for Solaris 9.

Install newest JRE on Solaris 9 Sparc (64-bit)

Note: This message has also been posted on the JRE forum. This is the second attempt to post it here.
I would like to know the best method to replace the JRE that is installed with a Solaris 9 (SPARC) installation. A clean installation of Solaris 9 comes with JRE 1.4 and I would prefer 1.4.1 (64-bit) or newer. Sun provides self-extracting archive downloads of the latest JREs for Solaris, but I have been unsuccessful in using these. I followed the instructions at:
http://java.sun.com/j2se/1.4.2/install-solaris.html
for doing a self-extracting installation, but this does not replace the contents of /usr/j2se with the new JRE. Additionally a pkginfo still points to the old JRE. I also read the instructions at:
http://java.sun.com/j2se/1.4.2/install-solaris-64.html
which stated I should install the 32-bit version, and then the 64-bit version. Finally, both set of instructions mention installation from packages, yet I am unable to find the packages to download. What is the best method to remove the JRE from a Solaris installation and install a newer version of the JRE so the pkginfo is updated and the new JRE resides in /usr/j2se? Any assistance is appreciated.

I found by issue "mount -v" that our disk slices are
UFS type. So we don't need apply patch 5257399,
right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
Your safest bet would be to escalate the request wityh Oracle Support.

Problems to install Oracle SOA Suite 11g on Solaris 10 SPARC-64

I'm trying to install the Oracle SOA Suite 11g on Solaris 10 SPARC-64 but I´m having problems.
I have already installed the JDK 1.6_11 for 64 bits and I use it for the SOA installation, the instruction is:
./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
I'm providing the absolute path to ensure take the correct JDK (JDK 64 bits).
But I get the following error:
bash-3.00$ ./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
Starting Oracle Universal Installer...
Checking if CPU speed is above 300 MHz. Actual 1500 MHz Passed
Checking Temp space: must be greater than 150 MB. Actual 5291 MB Passed
Checking swap space: must be greater than 500 MB. Actual 39311 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-01-26_03-17-44PM. Please wait ...bash-3.00$ Log: /home/oracle/oraInventory/logs/install2010-01-26_03-17-44PM.log
[ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
[EXCEPTION]:java.lang.reflect.InvocationTargetException
I reviewed the log install2010-01-26_03-17-44PM.out and displays the following:
Adding /tmp/OraInstall2010-01-26_03-17-44PM for deletion.
Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/soawl.jar
Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/template.jar
[email protected]creenRes
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: ld.so.1: java: fatal: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: wrong ELF class: ELFCLASS64 (Possible cause: architecture word width mismatch)
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1674)
     at java.lang.Runtime.load0(Runtime.java:770)
     at java.lang.System.load(System.java:1005)
     at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:402)
     at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
     at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
     at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
     at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
     at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
     at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
     at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
     at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
     at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
     at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
     at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
     at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
Caused by: java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1709)
     at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     at java.lang.System.loadLibrary(System.java:1030)
     at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:420)
     at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
     at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
     at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
     at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
     at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
     at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
     ... 8 more
[ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
[EXCEPTION]:java.lang.reflect.InvocationTargetException
I think that the error would be caused by the JDK version with which try to initializing.
Anyone have any idea about the possible error? Thanks in advance.

Hi, I encourage you to try to use the generic installer at: %SOA_INSTALLER_DIR%/Disk1/runInstaller. Because if you are using the runInstaller at %SOA_INSTALLER_DIR%/Disk1/install/solaris it will lead to that problem in some cases.

Grid installation in solaris 10 (sparc) with Suncluster

While installing grid for cluster, node information table appears as blank.. while clicking "use cluster configuration file" option in that screen it shows that vendor clusterware detected. cluster configuration cannot be modified..
If anyone knows how to resolve this problem, please post ur solution or if you have any procedure to install 11g r2 Grid infrastructure for a cluster in Solaris 10 sparc os with sun cluster 3.2, please send me the document to my email id- [email protected]

I would suggest changing the media you burned it on. That always seems to be the issue with things like this. Search the forums for suggestions on what works.

Messages in the OS logs of Oracle Solaris on SPARC (64-bit)

One of my Customer is getting following messages in the OS logs of the Oracle Solaris on SPARC (64-bit) machine.
Feb 2 01:07:33 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 03:07:43 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 03:07:43 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
Feb 2 05:07:52 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 05:07:52 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 07:08:08 ndc-m9k-2-r1 scsi: [ID! 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 07:08:08 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 09:08:25 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 09:08:25 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
There is a note # 833665.1 on this which states "The issue is caused by the Host Storage metrics collected by the agent" and also a Patch 8477122 has been created for this issue.
However, there is nothing mention in the Note # 833665.1 about the following one message.
Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
Can anyone please tell me
1. whats the significance of the "oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call" message in the OS log?
2. Does this message get stops on applying of patch # 8477122 ?
Thank you,
Bhavin

There are a number of known issues with the 10g agent on Solaris and patches are available. I assume you are running the 10.2.0.5 agent since you reference patch 8477122. If this is a brand new agent installation i would start with applying the latest PSU update which contains many related fixes. If you are still getting the error after this, open an SR with Oracle Support with your specific error message.

SSGD 4.20.909 / Solaris 10 - Sparc / sporadic launch problems

Similar Messages

Maybe you are looking for