Ssh access very slow to some accounts

I have OS X Server 10.6.2 up and running. If I ssh from a client machine to the server as the admin user, I get a password prompt, and on entering the password I immediately get to a shell prompt. If I do the same but specify another user, I get a password prompt and then there is a long wait of about a minute after entering the password before I get a shell prompt.
I believe I have DNS set up correctly. Both forward and reverse DNS is working for both addresses on my local network and for external addresses. Running the "sudo changeip -checkhostname" command shows no problems.
On examining the logs I see a few worrying looking entries such as:
Dec 14 11:10:39 mms edu.mit.Kerberos.CCacheServer[1478]: launchctl start error: No such process
But I still see that the user that saw the long delay before logging in successfully has valid Kerberos tickets, as per the output of the "klist" command:
mms:~ sh$ klist
Kerberos 5 ticket cache: 'API:Initial default ccache'
Default principal: [email protected]
Valid Starting Expires Service Principal
12/14/09 11:31:04 12/14/09 21:31:04 krbtgt/[email protected]
renew until 12/15/09 11:30:33
12/14/09 11:31:34 12/14/09 21:31:04 host/[email protected]
renew until 12/15/09 11:30:33
Which would imply that Kerberos is doing its job correctly?
Any suggestions about what might be causing the delays I'm seeing and what I might do to correct the problem?

I'm still struggling with this and drawing a blank searching for similar reports. Does anyone else see this problem? I'm beginning to suspect it might be something unique to my setup.
To add a further piece of information, the home directory of the account which is slow to connect to is an afp mount and the first thing I see in the system log after the long delay is a line like the following:
Feb 9 11:21:36 mms sshd[50749]: afp home directory mount succeeded
A pwd run from this account shows:
/Network/Servers/mms.marske.local/Users/sh
and the mount command shows the following info:
map -fstab on /Network/Servers (autofs, automounted, nobrowse)
I was thinking that maybe it was the afp automount that was taking so long except for two things.
1) The disk is local to the server, and
2) If I logout of this account an issue the command "ls /Network/Servers/mms.marske.local/Users/sh" from another account, the directory listing returns immediately.
Any thoughts?

Similar Messages

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Report run very slow because some user accessing the same report

Dear All,
I group my table into 3 tablespace And some reports, accessing different tablespace (more than 1 table space). and these report will always be run by 5 user in the same time. and make it run very slow. Is it going to make the report very slow ? Please advice
Thanks in advance
Widhi

Hi,
i hope that may not be the actual problem..
if ur report processing includes relatively high
amount of calculations on tables..then the report
processing can be very slow...
In that case try to create a table to store ur calculations
temporarily and try to use that table in the report..

Qt applications over ssh tunnel: very slow redrawing

Regularly I do not use many Qt applications, mostly Skype. I run it over ssh tunnel from another computer within the same local network for long time. After recent system update I noticed it became very slow refreshing its graphics. I checked several Gtk and Qt applications and found that Gtk ones work almost with the "native" speed, while Qt ones with that damn slow redrawing...
I tried ssh with both "ForwardX11" and "ForwardX11Trusted" - there is no difference. I'm using no DE with xmonad WM (tried TWM - no difference either) in x86_64 box.
Any directions/advices/ideas?
Thanks!

Regularly I do not use many Qt applications, mostly Skype. I run it over ssh tunnel from another computer within the same local network for long time. After recent system update I noticed it became very slow refreshing its graphics. I checked several Gtk and Qt applications and found that Gtk ones work almost with the "native" speed, while Qt ones with that damn slow redrawing...
I tried ssh with both "ForwardX11" and "ForwardX11Trusted" - there is no difference. I'm using no DE with xmonad WM (tried TWM - no difference either) in x86_64 box.
Any directions/advices/ideas?
Thanks!

Finder being very slow on user account

Hello,
I have a retina MacBook Pro with 16GB of ram. I am having an issue with finder being very slow on one of my user accounts, sometimes it is taking up to a 2mins to show the files in the folder. Also if often hangs and I get the beachball icon when clicking into folders and just using finder in general. This is on both local drives and network drives. I have 2 user accounts one for personal and one for work. My personal account has no problems and it is fast as I would expect from an SSD. My work account has all the same applications and I can't see anything obvious in activity monitor that would be causing it to be slow. I've thought about making a new user account but I would like to have all my settings etc the same as I have it set up just right now.
Any suggestions would be greatly appreciated.
Thanks
Andy

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

Cat 4006 S3 - Attached hosts Net access very slow prior to reboot

I have a CAT 4006 sup III running 12.1(11b)EW1 with a number of servers attached. Users started having problems accessing servers. After investigating all the impacted servers were connected to the same switch. The switch was appeared to be operating normally. Show proc cpu, show proc mem, show logging, and ping tests all normal. Warm booted switch and asics on sup failed bootup diag. Cold boot of the switch got it back up and running. Cisco Tac reviewed the post problem sh tech with no findings.
Any ideas?

No L2 loops and it was a hopefully isolated incident. We have to switches that are identical in hardware and IOS and only one was impacted.
clients of systems attached to the switch would have intermittently slow or non existent access to the host systems. Problems included saving files on network drives, email down, very slow or failed logins, application launches were slow or failed.
No messages were showing up in the switch log, let alone messages referred in the tech note. We have had asic issues on line cards in the past. Those instances were on different switches and created volumes of errors.
Layer 2 seemed fine. Pings were worked without fail. Console broadcast messages from host systems on the impacted switches made it out to clients.
Keep thinking it wasn't a switch problem but the reboot did fix the issue.
I will be replacing the sup card and doing a IOS upgrade this weekend.

SharePoint Site Very Slow and some time Request Timed Out

Hi All
I have many Web Application is running in SharePoint Farm. Since yesterday one of the web application started responding very slow. It takes 5 to 6 mins to load the page. Some time i received request timed out error message. But all other web applications
are working good.
I increased executionTimeout value, stall it slow / not responding.
Please let us know if you have come across this issues or any suggestion from your end to resolve this issue.
Thanks in Advance - Guru
Cheers, Guruprasad

i would recommend enable the developer dashboard on the web app and check which task is consuming the more time i.e. webpart, query to database etc.
also any change to web app since the issue started, any new webpart added to the page, any solution deployed or something else.
also did you try to recycle the app pool of the web applications?
how many wfe in the farm?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Online RPD access very slow from the server

Hi Experts,
When we try to access RPD from the production it was very slow.
Is there any setting to make it fast.
Thanks in advance for your ideas.
Regards,
RMD

Yes,
Install a bi server component in windows box(which is there in same network of your production machine). This is dedicated box for rpd changes...
Now, point AnalyticsWeb(which comes default) machine name to: the linux box (production) where online rpd is there...
this machine name should be mentioned in Server field while configuring AnalyticsWeb DSN.
this way, you can make online changes for prod rpd.. This is because, we can't open rpd in linux box as there with windows..
Thanks for making me to recollect this valuable information... :)

Safari gets stuck/very slow on some sites

Some weeks ago I did install by mistake a Mavericks Developer Pre-Release of 10.9.2 (or 10.9.3... I don't remember exactly) on my development Mac.
Since then Safari gets stuck on some sites; one of them is StackOverlow. The page loads partially then Safari hangs for some time 5-15 secs. (user interface becomes non-responsive with spinning wheel) then the page finish to load.
I was hoping the problem would have been fixed with the first public release so I didn't swiched back to the last backup (second mistake, very stupid).
Now on 10.9.5, Safari 7.1.2 (9537.85.11.5) the problem still persists.
I hope there is a way to fix the issue without reinstalling everything.
Thanks in advance for any help.
Paolo.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n -\tmod date: %s\n -\tchecksum: %s\n%s\n' '\n ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\/|\.prefP/&&/\/(Lib|usr).+\/(.+\.lproj|Contents|Info\.plist|Resources)|\.framework$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/([A-Za-z_]+\.lproj|Contents|Resources|Versions)(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)|\.(action|bundle|framework|kext|pkg|prefPane|service|vst)$/d;p;' 's/Pr.+n //p' ' /.kext$/ { s=system("PlistBuddy -c Print\\ :OSBundleRequired "$0"/*/I*|grep -q Sa");if(s==0) $0=$0" S"; };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n -\t"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' /[my]: /H;/^ *Lo.+: /{ H;b0'$'\n'' };$b0'$'\n'' d;:0'$'\n'' x;/: [3IU]/!d;s/.+n: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c Print\' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Stylesheet Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 14 31;A4 39 57 70 0;B2 15;B6 14 15 4;C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 31;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I upgraded my MacBookPro 10,1to Yosemite and the internet has become very slow on some sites.

Problem description:
Slower start up and some pages on internet take nearly a minute to load, compared with a second or 2 before Yosemite
EtreCheck version: 2.1.6 (109)
Report generated 20 January 2015 20:52:28 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (Retina, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro10,1
1 2.7 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 129
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD spdisplays_2880x1800Retina
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:47:48
Disk Information: ℹ️
APPLE SSD SM768E disk0 : (751.28 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 750.05 GB (658.81 GB free)
Core Storage: disk0s2 750.42 GB Online
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
TomTomHOMERunner Application Hidden (/Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app)
Internet Plug-ins: ℹ️
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 4.1.10329.0 [Support]
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      4% WindowServer
      1% fontd
      0% AppleSpell
      0% notifyd
      0% racoon
Top Processes by Memory: ℹ️
241 MB com.apple.WebKit.WebContent
137 MB Safari
120 MB Spotlight
103 MB ocspd
103 MB mds_stores
Virtual Memory Information: ℹ️
9.94 GB Free RAM
5.55 GB Active RAM
510 MB Inactive RAM
1.18 GB Wired RAM
886 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 20, 2015, 08:05:15 PM Self test - passed

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Back up all data before making any changes.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If the Downloads button (with the icon of a downward-pointing arrow) is showing in the toolbar, click it and then click Clear in the box that appears. The download history will be removed. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
          Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Follow the instructions in this support article. Any change?
Open the iCloud preference pane and uncheck the box marked Photos, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Cdrom access very slow on many computer model

When my pc boot on pxe it hang just before the prompt and each time i
open img. The cdrom light blink and i hear the cdrom spinning.
So the script i created that delete each partitions then create 3 new
one and dump from network is very long, because it call img about 12
times...
Thanks
Pierre Boisvert

On Fri, 09 Dec 2005 13:42:38 GMT, Pierre wrote:
> I tested also on a HP D530 and it was ok, but if put a usb cdrom it
> will hang like the others.
there has been some problems with cdroms... I think the best bet would be
to raise a SR with NTS, as they probably will require access to the
hardware..
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Outlook Connector very slow on some machines

Hi,
I have installed outlook connector on 3 machines, and it's really slow on 2 of them. Identical hardware, identical Outlook version. Installed all updates from Microsoft...
Simple test:
Start outlook, wait a bit (so it's done loading and stuff), click on a shared folder with 50 mails.
On the fast one, this is practically instant, with the folder-contents showing up at once.
On the slow ones, this takes about 7 seconds from click to the folder-contents showing up. Also, it shows the "Synchronizing folder"-dialog (just shows the dialog for a couple seconds, then it vanishes and the folder-contents show up. No progress bar movement)
Outlook 2003 (11.8313.8221) SP3
Connector 7.3 update 1
Messaging server 7.3-11.01 64bit
If we set up outlook with an imap account instead of the connector on the slow machine, it's just as fast as the fast machine...

whaterverfdsa wrote:
Is the problem the system/install of OC or the profile/user. Try reinstalling OC on the "fast" system but use the profile/user of one of the "slow" systems.Have tried the other way around (tried with the "fast user" on the "slow machine" :o)... still slow..)In which case the problem is unlikely to be "server-side". You can also review the Outlook Connector debug logs to see if there is some indication of why the delay is occuring.
http://wikis.sun.com/display/CommSuite/Troubleshooting#Troubleshooting-Logging
I can't seem to get any IMAP telemetry logs from outlook connector....
I wasn't quite sure what was meant when the docs say create a directory imap/<userid>. What is the userid? So I tried some variations. This is for user in the default domain. Tried jdoe, [email protected] and an alias address (it was the mail-value in ldap). Nothing appeared when using the outlook connector, but when I added the account as an imap account in outlook, logs appeared in the jdoe-directory... Doesn't the outlook connector use imap???
Yes it does. Telemetry logs are only created for new connections after the telemetry directory for the user has been created. So you would need to restart Outlook to get the log files.
(btw: imap idle doesn't seem to work when using outlook connector, but works when using imap account...?)It definitely appears Outlook Connector does not make use of IMAP IDLE. A quick search didn't reveal any existing enhancement requests to have this functionality added.
Regards,
Shane.

Libwebkit(webkit-gtk) based browsers very slow on some sites

Tried midori, epiphany and vimprobable.
Slow performance on google reader, when viewing feeds.
On some apple pages, for example: http://www.apple.com/ipad/features/ (100% cpu usage and browser freezes for few minutes).
And some others.
At the same time in arora(webkit-qt based) all working fast and smooth.
So.. i'am wondering, is it only me? Or is it Arch version of libwebkit? Or maybe this is global issue?
p.s. i'am using x86_64 OS.
p.p.s. oh, and sorry for my bad english..

https://bugs.webkit.org/show_bug.cgi?id=42052
http://trac.webkit.org/changeset/70688
This has been merged since the 1.3.6 dev release, I've tried to backport the patch to 1.2.5 but with very limited success (API has been bumped big time and if cairo patch passes something else breaks).
You can very easily use PKBUILD from libwebkit-gtk in extra to build 1.3.7 dev version.
http://webkitgtk.org/webkit-1.3.7.tar.gz
Compiling on my laptop takes forever it seems so I didn't want to maintain this one in AUR, if someone else is willing to do this then great It's one thing to have fun for myself, entirely different to be responsible for something many others are using.

Windows File access very slow......

Hi !
I´m working with a DP800 Quicksilver, with OS-X 10.4.5.
(1,5 Gig Ram, 500 Gig Hitachi ATA 66 HD)
Via ftp, I got transfer rates (up-and download) Quicksilver
to my linux-samba-machine of 10 MegaBytes / second !
Via CIFS (OS-X Network environment),
to the same samba machine only 50 KBytes /second....
(windows xp, 2000, 98 AND the same mac (old harddisc,with os9.2+ thusby Dave) works with 3-5 Megabytes / second.
So what´s wrong with the filesharing under OS-X ?
(DNS Name resolution, ping etc. everything works fine)
thank you for any comments,
with compliments
martin
Quicksilver DP800 Mac OS X (10.4.5)

Hi,
Whether the issue occurs on using all systems (Windows 7/8/server) or only specific systems? Please test to access the same share folder on different computers to see the result.
Also try to install the following hotfix on that server to see the result. If client systems are Windows 8/8.1/2012/2012 R2, install this hotfix as well.
Transferring files by using SMB2 or SMB3 causes memory leak on a Windows computer
https://support2.microsoft.com/kb/2928360/en-us
Also here is an article for troubleshooting such network related issue:
[Forum FAQ] Troubleshooting Network File Copy Slowness
https://social.technet.microsoft.com/Forums/windowsserver/en-US/1023eab5-d609-485b-930e-db5a9352e420/forum-faq-troubleshooting-network-file-copy-slowness?forum=winservergen
First of all pelase try "1.2 Check, Enable and Disable SMB Versions in Windows operating systems" - disable SMB2/3 to see if issue persists in SMB1. This is just for testing and you can re-enable after testing.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Converting a ResultSet to XML (mysql) - very slow - need some criticism

Preface:
I have some data being inserting into a mySQL table every 5 minutes. Currently, there are about 275 rows. Each row has 26 (TEXT) columns, the data in those columns is no longer than 10-15 characters.
I am using the following code to turn this data into XML which is then, through a servlet, output on a webserver. With 275 rows, this is taking around 3-4 minutes to generate the XML file. I am worried that in a week from now when the data is over 2,000 rows it will exponentially decrease in speed. Can someone give me a better route so this will run faster?
       String xml = "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n\n";
       String SQLCommand = "select * from "+getDataId()+";";
       try{
            Statement stmt;
            ResultSet rs;
           String url = "jdbc:mysql://"+getIBoxIp()+":"+getDbPort()+"/"+getDbName();
           Connection con = DriverManager.getConnection(url,getDbUsername(), getDbPassword());
                stmt = con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY);
                rs = stmt.executeQuery(SQLCommand);
                while(rs.next()){
                  xml += "\n<row>";
                  ResultSetMetaData md = rs.getMetaData();
                  for(int i = 1; i < md.getColumnCount() + 1; i++){
                       xml += "\n\t<" + md.getColumnName(i) + ">" + rs.getString(i) + "</" + md.getColumnName(i) + ">";
                  xml += "\n</row>\n";
                System.out.println("@@mysql> XMLSQLCommand > " + SQLCommand);
           con.close();
           return xml;
       }catch(Exception ex)
            System.out.println("@@mysql> SQLCommand Failed > " + SQLCommand + "\n@@mysql> Exception > " + ex.getMessage() + "");
            return xml;
       }Again, with 275 rows, I'm getting about 250 KB of data in the resulting XML file with a 3-5 minute parsing/generation time.
Thanks in advance!!!
Edited by: bergy on Sep 21, 2007 8:46 AM added code tags

No, it's a good question. The page I linked to does say
"Instead of XMLWriter, this driver uses David Megginson�s other public domain writer program, DataWriter..."
So yeah, trying to track down Megginson's code might not be such a good idea. But the sentence quoted does suggest what should be used instead: XMLWriter. Which implies that XMLWriter was mentioned somewhere earlier in the book.
So, following the "Prev" links to previous pages, eventually I found XMLWriter discussed a couple of pages earlier, where it says
"More specifically, I�m going to use David Megginson�s public domain com.megginson.sax.XMLWriter class."
I don't really find this very satisfactory as advice for beginners, so I somewhat regret doing that. It's a long time since I looked at that page myself. But it does have a link pointing to http://www.megginson.com/downloads/, where it is possible to download the Java version of XMLWriter. I'm not sure if the OP is comfortable with using downloaded software, but that download is the simplest possible Java download so it might be a good place to start.
You could recommend using a DOM strategy, and JDOM might be a good choice, but if you can just generate the XML straight from your input, it's a better strategy to do that rather than building a DOM tree in memory and then serializing it, in my opinion.

Ssh access very slow to some accounts

Similar Messages

Maybe you are looking for