SSH / ARD no longer working on 10.6 Server

This happens quite often. Too much for my liking actually.
Randomly SSH or ARD will stop working.
SSH, Port 22 Connection Refused.
ARD Not Active.
Makes no sense. Both Remote Login and Remote Management are on in Sharing Prefs Pane.
SSH should never, ever get turned off, ever, or Connection Refused (for / from me).
If I can at least get to the server via SSH, I can then use the Kickstart ARD command and get ARD going again.
I also can not ssh to server using their FQDN, even though they are in the DNS. I have to use their IP addresses only.
Any ideas.
thanks,
John

Look at the server side:
/var/log/secure.log
This is where sshd sends its error messages.
If the information does not contain sufficient details, you can modify the server side
/etc/sshd_config
Changing:
#LogLevel INFO
to:
LogLevel DEBUG3
Notice that the # comment character is also removed.
Now restart server side sshd by stopping/starting System Preferences -> Sharing -> Remote Login
Now go back and look at
/var/log/secure.log
After the next failure. NOTE: you shoudl most likely restore /etc/sshd_config back to its original state after you figure out what has gone wrong.

Similar Messages

DLU no longer working on win2003 Term Serv

Hi:
Last night, I had to flatten & reload a win2003 Terminal Server. Re-installed the 4.90sp2 client and ZfD4 agent and now my DLU's no longer work.
More info: When I install the agent (either zfd401_ir4a or ir6), it forces me to enter an address for the Middle Tier Server. Historically, I could just <next> right past that since we don't have a Middle Tier Server. Is this because the agent isn't seeing the 4.90sp2 client?
Any thoughts? Users can't login twice you know.... Thanks.
Steve.

Seems to be a problem here.
The only thing I see at:
HKLM/Software/Novell/Workstation Manager/Identification
is:
Name - Type - Data
Default - REG_SZ - (value not set)
Steve.
>>> Marcus Breiden<[email protected]> 09/08/05 04:07AM >>>
On Thu, 08 Sep 2005 02:37:41 GMT, Steven Singhose wrote:
> More info: When I install the agent (either zfd401_ir4a or ir6), it forces me to enter an address for the Middle Tier Server. Historically, I could just <next> right past that since we don't have a Middle Tier Server. Is this because the agent isn't seeing the 4.90sp2 client?
no... you can always leave that field empty..
make sure that the tree in
HKLM/Software/Novell/Workstation Manager/Identification
is correct... zenpol32.dll is only in the agent directory and the agent in
the path..
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

VPN no longer working after moving DHCP server to router

I am preparing my SBS 2008 environment for migration to Server 2012 R2 Essentials. I moved the DHCP server to the router (a Netgear R7000 with standard firmware). I am able to access RWW and CompanyWeb via the router from external locations.
With the VPN, however, I can only connect but cannot access any network resource (including file shares). The VPN is supported by the SBS server with RRAS. I didn't change any of the configuration because I didn't think any of it needed to be changed. The
router just needs to get it's reservations from a different DHCP server, right? Anyway, would appreciate if someone can shed some light on what's going on here.
JeHarry

Hello JeHarry,
I would recommend you to follow the TechNet to migrate SBS 2008 to 2012 R2 Essentials. Don't skip any part.
https://technet.microsoft.com/en-us/library/jj200141.aspx
Troubleshooting VPN Issues on 2012
http://blogs.technet.com/b/sbs/archive/2014/06/11/troubleshooting-common-vpn-issues-on-windows-server-2012-r2-essentials.aspx
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

VNC no longer working after Leopard install

I have been running Vine Server on my machine for several months now without a hiccup, and I've really gotten used to being able to access my home machine from work. However, after upgrading to Leopard last weekend, my remote access no longer works. The Vine Server application appears to be running just fine, but when I try to access the VPN from work (using TightVNC - same as I've always done) it just hunts for a few minutes and then tells me it can't find the network.
I haven't changed any settings on either the router or the Mac. Any idea what's going on here? How can I get my remote access back?

Screen sharing is broken for me as well, trying to access a mac mini server (was snow leopard - is now Lion) from an iMac using the Lion server admin tools. It says "Connecting to "192.168.1.7"" but never connects.
SSH connects though so perhaps you can wrestle control of the server using the terminal.
I can't use the machine locally, the keyboard and mouse are unresponsive and there is no hdmi output to the Sony Bravia that its connected to.
I'm pretty close to doing a full re-install but I need to track down some urls posted on one of the blogs that the server was running first.

X11 session tunnelling via SSH: no longer working!

Hi!
Graphical access to a Solaris 9 or 10 server via X11 tunneled thru an SSH session used to work fine until recently. In other worlds, you would connect with a
ssh -X [email protected] your workstation running an appropriate X11 server, the remote SSHD would set up the DISPLAY variable pointing back to itself and everything would work as expected. Run a graphical app, and it would happily pop up in your display.
However, recently this has stopped working on two different servers I use, one with Solaris 9 and the other with the latest Solaris 10. The ssh session works normally, but the DISPLAY variable does not get set and the following error pops up in the console:
Aug 26 13:58:46 sunserver sshd[2251]: [ID 800047 auth.error] error: Failed to allocate internet-domain X11 display socket.Both servers were patched with the latest security and recommended patches. Tried by connecting from a MacOS X 10.5 portable (using the included X11 server), a Knoppix 5.3.1 host and an OpenSolaris host, all with the same failed results. However, on an older Solaris 9 server that has not been recently patched, the tunnelling works as usual, so it seems to be a server-side problem. And, like I mentioned, this all used to work on the failing servers, before the patching orgy this summer.
Since the tunnelling no longer works, the only way to run graphical apps is by manually doing the insecure xhost +client / DISPLAY=server:0.0; export DISPLAY routine.
Has anyone run across this problem and know which patch messed things up? Is there a solution or, at least, a workaround?
TIA for your help.
J. Courcoul

There was a posted six hour service window for this web site yesterday. Your initial posting should have happened just
before the service windows opened and after the service windows expired half of the world was still asleep and then you
complain the next morning about the dearth of responses. Talk about underwhelming.Guess my anxiety due to user pressure was showing... :D HOWEVER, I did get a perfectly good response on comp.sys.sun.admin about four hours after posting, even though slashdot and others have been crowing about the death of Usenet.
Usually X forwarding breaks when there is nothing to connect back to but your messages seems to suggest that a patch
has caused the problems. For the life of me I can't figure out why adding an IPv6 loopback address would fix this but
an actually Sun employee would know better than I.Precisely why I don't want to mark the question as answered yet. Heck, when I read the trick, it made me think that I had completely misunderstood how the tunnelling mechanism works.
You might try going through the list of patches that were applied and see if any of them contain files related somehow
to SSH and then file a bug report against that patch to Sun so it can be fixed, again.Yes, cause there was an ssh/sshd patch that came out in the June/July timeframe which may have a bearing. However, I recall there was at least one or maybe two patches for tcp that may also have been a cause. Time to put on the Sherlock Holmes cap...

Ssh after ACS server "locked up" and had to be reconfigured no longer works.

Hello
I have a VPN tunnel between an ASA5520 and a Cisco 891.
I had the 891 configured with the following:
aaa group server tacacs+ VTY
ip tacacs source-interface Loopback0
aaa group server tacacs+ TACACS-ACS
server 10.8.x.x
server 10.16.y.x
aaa authentication login CONSOLE none
aaa authentication login VTY group tacacs+ local
aaa authorization exec VTY group tacacs+ local
aaa authorization commands 0 VTY group tacacs+
aaa authorization commands 15 VTY group tacacs+
aaa accounting commands 15 VTY start-stop group tacacs+
aaa accounting commands 15 CONSOLE start-stop group tacacs+
ip tacacs source-interface Loopback0
tacacs-server host 10.8.x.x key 7 yadayadayadayada
tacacs-server host 10.16.y.x key 7 yadayadayadayada
tacacs-server directed-request
line vty 0 4
access-class 1 in
authorization commands 15 VTY
authorization exec VTY
accounting commands 15 VTY
login authentication VTY
transport input ssh
line vty 5 15
access-class 1 in
authorization commands 15 VTY
authorization exec VTY
accounting commands 15 VTY
login authentication VTY
transport input ssh
I no longer can access device remotely. I am sure it has to do with the ACS server, but not sure where to look.
Any help would be greatly appreciated.

Hi,
This is configuration issue.
Have you added the loop back interface ip of router on to AAA server as a AAA client?
Are the shared key same on both router and aaa?
If both the above are fine the remove the entire aaa configuration and apply them frsh as below.
no aaa new mode
enable password ***********
username admin privilege 15 password *********
aaa new-model
aaa group server tacacs+ VTY
server 10.8.x.x
server 10.16.y.x
aaa authentication login VTY group tacacs+ local
aaa authentication enable VTY group Tacacs+ enable
tacacs-server host 10.8.x.x key 7 xxxxx (xxxxx should be the same key used in ACS)
tacacs-server host 10.16.y.x key 7 xxxxx (xxxxx should be the same key used in ACS)
line vty 0 4
login authentication VTY
Hope that helps
Regards
Najaf

[SOLVED] Openbox autostart no longer working since upgrade

After the upgrade on May 14 2013 my autostart file no longer works. I tried renaming my autostart.sh to just autostart no luck. There is nothing wrong with the autostart file as I can run it manually and it will load all my apps. Also, if I cd to /usr/lib/openbox/ and run openbox-autostart directly it works. Here are the updated packages:
[2013-05-14 21:34] [PACMAN] upgraded ethtool (1:3.8-1 -> 1:3.9-1)
[2013-05-14 21:34] [PACMAN] upgraded firefox (20.0.1-5 -> 21.0-1)
[2013-05-14 21:34] [PACMAN] upgraded gsettings-desktop-schemas (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded glib-networking (2.36.1-1 -> 2.36.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.0.1-2 -> 3.8.2.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnupg (2.0.19-7 -> 2.0.20-1)
[2013-05-14 21:34] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
[2013-05-14 21:34] [PACMAN] upgraded gvfs (1.16.1-2 -> 1.16.2-1)
[2013-05-14 21:34] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
[2013-05-14 21:34] [PACMAN] upgraded mplayer (35920-2 -> 35920-3)
[2013-05-14 21:34] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
[2013-05-14 21:34] [PACMAN] upgraded pango (1.34.0-1 -> 1.34.1-1)
[2013-05-14 21:34] [PACMAN] upgraded pdnsd (1.2.9.a-1 -> 1.2.9.a-2)
[2013-05-14 21:34] [PACMAN] upgraded python2-distribute (0.6.38-1 -> 0.6.39-1)
[2013-05-14 21:34] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
[2013-05-14 21:34] [PACMAN] upgraded sudo (1.8.6.p8-1 -> 1.8.6.p8-2)
[2013-05-14 21:34] [PACMAN] upgraded thunderbird (17.0.5-2 -> 17.0.6-1)
[2013-05-14 21:34] [PACMAN] upgraded virtualbox (4.2.12-2 -> 4.2.12-3)
[2013-05-14 21:34] [PACMAN] upgraded vte-common (0.34.4-1 -> 0.34.5-1)
[2013-05-14 21:35] [PACMAN] upgraded python3-threaded_servers (2013.5.12.3-1 -> 2013.5.14.1-1)
Not sure what's going on or what could have caused it. My .xinitrc looks like this:
#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
export BROWSER="chromium"
# Start GNOME Keyring
eval $(/usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh)
# You probably need to do this too:
export SSH_AUTH_SOCK
export GPG_AGENT_INFO
export GNOME_KEYRING_CONTROL
export GNOME_KEYRING_PID
exec openbox-session
My .zprofile
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && startx &> ~/.xlog
My systemd startup service:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Getty on %I
Documentation=man:agetty(8) man:systemd-getty-generator(8)
Documentation=http://0pointer.de/blog/projects/serial-console.html
After=systemd-user-sessions.service plymouth-quit-wait.service
After=rc-local.service
# If additional gettys are spawned during boot then we should make
# sure that this is synchronized before getty.target, even though
# getty.target didn't actually pull it in.
Before=getty.target
IgnoreOnIsolate=yes
# On systems without virtual consoles, don't start any getty. (Note
# that serial gettys are covered by [email protected], not this
# unit
ConditionPathExists=/dev/tty0
[Service]
# the VT is cleared by TTYVTDisallocate
ExecStart=-/sbin/agetty -a dodo3773 %I 38400
Type=simple
#Restart=always
#RestartSec=0
UtmpIdentifier=%I
TTYPath=/dev/%I
TTYReset=no
TTYVHangup=no
TTYVTDisallocate=no
KillMode=process
IgnoreSIGPIPE=no
# Unset locale for the console getty since the console has problems
# displaying some internationalized messages.
Environment=LANG= LANGUAGE= LC_CTYPE= LC_NUMERIC= LC_TIME= LC_COLLATE= LC_MONETARY= LC_MESSAGES= LC_PAPER= LC_NAME= LC_ADDRESS= LC_TELEPHONE= LC_MEASUREMENT= LC_IDENTIFICATION=
# Some login implementations ignore SIGTERM, so we send SIGHUP
# instead, to ensure that login terminates cleanly.
KillSignal=SIGHUP
[Install]
WantedBy=getty.target
Edit: I tried switching to bash in a tty and then just startx but that doesn't help either.
Edit2: To be clear openbox does load a desktop. The autostart scripts at ~/.config/openbox/ just don't run. Thanks.
Edit3: I decided to run the command issued in openbox-session and added --debug to it. Here is the output of "xinit /usr/bin/openbox --debug --startup "/usr/lib/openbox/openbox-autostart OPENBOX" "$@" -- :1 -nolisten tcp" :
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux dodo713 3.9.2-2-ck #1 SMP PREEMPT Sun May 12 18:19:49 EDT 2013 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=06874255-7a5d-4968-8f09-1e53cb761f44 ro quiet init=/usr/lib/systemd/systemd
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Fri May 17 08:14:11 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
setversion 1.4 failed
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
setversion 1.4 failed
Openbox-Debug: --startup /usr/lib/openbox/openbox-autostart OPENBOX
Openbox-Debug: Moving to desktop 1
Openbox-Debug: not managing override redirect window 0x4000bb
which: no hsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no esetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no xsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
kupfer: Reading from stdin
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Openbox-Debug: Caught signal 22. Ignoring.
Openbox-Debug: UPDATE DESKTOP NAMES
Openbox-Debug: Keyboard map changed. Reloading keyboard bindings.
Edit4: Removed everything from /etc/xdg/autostart and ~/.config/autostart/ directories. That didn't work.
Edit5: Tried installing xorg-xsetroot to let openbox set the color of the wallpaper. That didn't work.
Edit6: Checked the output of "loginctl show-session $XDG_SESSION_ID" to make sure that wasn't the issue. Looks okay to me:
Id=1
Timestamp=Fri 2013-05-17 10:25:53 PDT
TimestampMonotonic=13650783
DefaultControlGroup=systemd:/user/1000.user/1.session
VTNr=1
TTY=tty1
Remote=no
Service=login
Leader=405
Audit=1
Type=tty
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=no
IdleSinceHint=1368811547544203
IdleSinceHintMonotonic=7545641
Name=dodo3773
Edit7: Tried installing xorg-xrdb thinking maybe that would help and did todays updates. No luck yet.
Edit8: Kupfer still loads even though nothing else does. So I uninstalled kupfer. Same thing though. No autostart.
Edit9: Tried booting into repo kernel instead of ck kernel. Didn't work.
Last edited by dodo3773 (2013-05-19 06:34:44)

WonderWoofy wrote:Interestingly, of all those things you included in your post, you forgot to include the autostart script itself. What does that look like?
Well, since it worked fine even when called indirectly through openbox-autostart and since it's worked fine for months I figured it was fine. I am happy to post it though. Here you go:
feh --bg-scale /home/dodo3773/Pictures/blacksolid.png &
xfce4-panel &
numlockx &
keepassx -lock &
kupfer --no-splash &
~/Documents/Scripts/startupopen.sh &
sleep 30 && sudo /usr/bin/ntpd -qg &
sudo /usr/sbin/ethtool -K eth0 rx off &
~/Documents/Scripts/conky.sh &
sudo /home/dodo3773/Documents/Scripts/temp_throttlenew > /dev/null 2>&1 &
Here are the external scripts that are called (startupopen.sh and temp_throttlenew):
startupopen.sh
#! /bin/bash
sleep 13
chromium &
thunderbird &
sleep 20
devilspie -a &
sleep 7
pkill devilspie &
exit
temp_throttlenew
#!/bin/bash
# temp_throttle.sh max_temp
# USE CELSIUS TEMPERATURES.
if [[ $EUID -ne 0 ]]; then
echo "This script must be run as root" 1>&2
exit 1
fi
#if [ $# -ne 1 ]; then
# If temperature wasn't given, then print a message and exit.
# echo "Please supply a maximum desired temperature in Celsius." 1>&2
# echo "For example: ${0} 60" 1>&2
# exit 2
#else
#Set the first argument as the maximum desired temperature.
MAX_TEMP=85
#fi
# The frequency will increase when low temperature is reached.
let LOW_TEMP=$MAX_TEMP-5
CORES=$(nproc) # Get number of CPU cores.
echo -e "Number of CPU cores detected: $CORES\n"
# Temperatures internally are calculated to the thousandth.
MAX_TEMP=${MAX_TEMP}000
LOW_TEMP=${LOW_TEMP}000
# FREQ_LIST is a list (array) of all available cpu frequencies the system allows.
declare -a FREQ_LIST=($(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies))
# CURRENT_FREQ relates to the FREQ_LIST by keeping record of the currently set frequency.
let CURRENT_FREQ=1
function set_freq {
echo ${FREQ_LIST[$1]}
cpupower frequency-set -g "ondemand" -d "800MHz" -u ${FREQ_LIST[$1]}
function throttle {
if [ $CURRENT_FREQ -ne $((${#FREQ_LIST[@]}-1)) ]; then
let CURRENT_FREQ+=1
echo -n "throttle "
set_freq $CURRENT_FREQ
fi
function unthrottle {
if [ $CURRENT_FREQ -ne 0 ]; then
let CURRENT_FREQ-=1
echo -n "unthrottle "
set_freq $CURRENT_FREQ
fi
function get_temp {
# Get the system temperature.
# If one of these doesn't work, the try uncommenting another.
TEMP=$(cat /sys/class/thermal/thermal_zone0/temp)
#TEMP=$(cat /sys/class/hwmon/hwmon0/temp1_input)
#TEMP=$(cat /sys/class/hwmon/hwmon1/device/temp1_input)
while true; do
get_temp
if [ $TEMP -gt $MAX_TEMP ]; then # Throttle if too hot.
throttle
elif [ $TEMP -le $LOW_TEMP ]; then # Unthrottle if cool.
unthrottle
fi
sleep 3
done
Stuff that needs sudo is in my sudoers as "username hostname NOPASSWD: item1,item2,etc,etc". Nothing too exciting. Seems like if there was suddenly something wrong with my autostart file at least some of the stuff would run either way though cause of "&". Pretty puzzling this issue is.

Kernel 2.6.39.1-1 issues: reboot no longer working

I recently upgraded from kernel 2.6.38.7-1 to 2.6.39.1-1 , and have observed that this has caused reboot to no longer work. Specifically, issuing "reboot -n" kicks off the shutdown process ok, and I see the shutdown procedure getting broadcast to the interactive users, but this then hangs at the very last step, where it says Restarting.
This used to work fine, and I have confirmed that a downgrade back to 2.6.38.7-1 fixes this for me. All other packages from core and extra are up-to-date as of the time of this post.
The hardware is a fit-pc2 (i.e. intel atom-based). Is this a known upstream bug?
Last edited by stripwax (2011-06-16 20:35:25)

Thanks for replies.
@stlarch : what information would be most useful? Happy to provide whatever might be relevant. Hopefully the below helps
1. I use laptop-mode-tools with everything enabled even for AC power and acpi-cpufreq.
2. both "shutdown -r now" and "reboot" work fine if I downgrade just the kernel back to 2.6.38.7-1 . They both don't work (i.e. hang instead of reboot) if I upgrade just the kernel to 2.6.39.1-1
3. It's all worked out of the box for me for the last 6 months or so, and only the latest 2.6.39.1-1 kernel has this problem, hence why I suspect it's a regression.
4. Assuming wm means window manager: none. I don't even have X installed. This is purely a headless server, run unattended and rebooted (when necessary) remotely via ssh.
5. My dmesg reports "Selecting BIOS-method for reboots." - regardless of kernel version (i.e. when running both versions mentioned)
6. No clues in the logs unfortunately leap out to me. Let me know if there's a specific logfile that might have clues. With both a successful reboot (on older kernel) and failed reboot (on the newer kernel) the last few lines of everything.log say the same thing:
Jun 11 16:30:33 Xxxx shutdown[1600]: shutting down for system reboot
Jun 11 16:30:33 Xxxx init: Switching to runlevel: 6
Jun 11 16:30:34 Xxxx nmbd[1060]: [2011/06/11 16:30:34.651659, 0] nmbd/nmbd.c:71(terminate)
Jun 11 16:30:34 Xxxx nmbd[1060]: Got SIGTERM: going down...
Jun 11 16:30:35 Xxxx laptop-mode: Laptop mode
Jun 11 16:30:35 Xxxx laptop-mode: disabled, not active
Jun 11 16:30:36 Xxxx kernel: [ 1605.732274] r8169 0000:02:00.0: PME# enabled
Jun 11 16:30:36 Xxxx syslog-ng[522]: Termination requested via signal, terminating;
Jun 11 16:30:36 Xxxx syslog-ng[522]: syslog-ng shutting down; version='3.2.4'
@brebs: As above, this works/doesn't work dependent solely on version of kernel26 package. Is there a kernel change between those two versions that would require me changing my kernel options? I'd like to understand what caused the regression and see if there's an upstream fix (or raise it as an upstream issue if not), rather than just a reconfiguration/workaround.

PCS no longer working with contacts and 6086

I have applied the latest release of PC Suite 6.84.10.3.
Previously the installed level was 6.83.14.1
The send/read/write message still doesn't work but hangs the Windows Explorer for a while (this hang didn't occur previously)
But now, the contact facility no longer works. It is no longer possible to edit a contact, to store it locally or to send it to the phone even a message says everything is OK
(translate it from french: The contact has been well recorded into the phone)
Folder browsing still works correctly, either the phone folder or the memory card folder
Need a fix or a way to install the previous version, at least for the contacts...
This is a really negative feedback!
Phil

I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
Now we have the functionality that we wanted, right?

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Link to A folder View in a PDF Portfolio - feature no longer working - please advise

Hi, I am no longer able to link to a Folder View of a PDF Portfolio:
Within a PDF portfolio i need to link from a PDF to a folder view in the Portfolio. I am using Link Action - Go to Page View.
This used to work for me - very important feature that no longer works. Please advise a workaround.
Steps:
1. Start a PDF Portfolio that contains files and folders
2. Open a PDF in the Portfolio
3. in the opened PDF click Add or Edit Link
4. Define a link area and set it to Go To A Page Vies
5. In the past i have been able to target a Folder View in the Portfolio - ie. direct a user not to a file, but instead to a folder view that contains relevant files. I would do this by setting the Target Page View to my desired folder view
6. This used to work in bringing a user to the folder view i specify. Now it does nothing. If i go back to the PDF and EDIT the Link i see this. File: Parent Document Page 1. This in fact does nothing.
Please advise, am i doing this wrong, it used to work. I have tried several workarounds, with no luck.
thanks!
Alejandro Collados-Nunez
Graphic Designer | Art Director
| e: [email protected]
| w: www.1lb.ca

There's an extension or two, or a combination of extensions which seem to be causing that in Firefox 6.0.2. One that has been mentioned is TabMix Plus.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
You need to figure out what is causing it, and disable that extension/s until they are fixed by their developer.

System password no longer works after 10.9.4 update

YOU CAN READ MORE ABOUT IT HERE:
Re: Issues after Software OS X 10.9.4 (13E28) upgradeRe: Issues after Software OS X 10.9.4 (13E28) upgrade
Same problem, here, updated, pw n longer works, HOW TO FIX? Can’t install anything, any ideas?
HERE IS MY ENTRSFO, HOPE IT HELPS:
EtreCheck version: 1.9.12 (48)
Report generated July 18, 2014 at 11:49:39 AM PDT
Hardware Information:
27" iMac (Early 2011)
iMac - model: iMac12,2
1 2.7 GHz Intel Core i5 CPU: 4 cores
16 GB RAM
Video Information:
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software:
OS X 10.9.4 (13E28) - Uptime: 1 day 11:8:27
Disk Information:
ST31000528AS disk2 : (1 TB)
EFI (disk2s1) <not mounted>: 209.7 MB
Macintosh HD (disk2s2) / [Startup]: 999.35 GB (59.06 GB free)
Recovery HD (disk2s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5690H
HGST HUS724020ALE640 disk0 : (2 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 2 TB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
HGST HUS724020ALE640 disk1 : (2 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
FireWire Information:
LaCie d2 quadra (button) 400mbit - 800mbit max
EFI (disk4s1) <not mounted>: 209.7 MB
Snow Leopard Copy (disk4s2) /Volumes/Snow Leopard Copy: 666.67 GB (18.36 GB free)
Desktop Download(s) from iMac (disk4s3) /Volumes/Desktop Download(s) from iMac: 666.67 GB (60.95 GB free)
OS Lion (disk4s4) /Volumes/OS Lion: 332.71 GB (3.91 GB free)
Recovery HD (disk4s5) <not mounted>: 650 MB
MBP COPY (disk4s6) /Volumes/MBP COPY: 333.09 GB (164.16 GB free)
Avid Mbox Pro 400mbit - 400mbit max
Thunderbolt Information:
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files:
/etc/hosts - Count: 18
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] at.obdev.nke.LittleSnitch (4050 - SDK 10.8) Support
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[loaded] com.HGST.driver.GDOCKDriver (1.0.3 - SDK 10.7) Support
[loaded] com.avid.driver.firewire.mboxpro (1.3.0 - SDK 10.7) Support
[loaded] com.digidesign.iokit.DigiDal (10.0f56 - SDK 10.6) Support
[not loaded] com.line6.driver.xtaudio (7.3.6 - SDK 10.7) Support
[not loaded] com.line6.iokit.ClassicNotSeizeVariaxIF (1.0.1) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
[not loaded] com.roxio.TDIXController (1.7) Support
[not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) Support
[loaded] com.waves.driver.soundgrid (2.0.0) Support
Startup Items:
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.line6.l6ksettingmgr.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] com.timesoftware.timemachineeditor.helper.plist Support
[running] com.waves.daemon.SoundGridProtocolService.plist Support
[loaded] PACESupport.plist Support
Launch Agents:
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.avid.mboxpro.helper.plist Support
[running] com.canon.MFManager.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.wacom.pentablet.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
iTunesHelper
SpeechSynthesisServer
uTorrent
G-Technology Assistant
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Cannot contact Adobe
EPPEX Plugin: Version: 10.0 Support
iLokClientHelper: Version: 3.6 - SDK 10.5 Support
DivX Web Player: Version: 3.1.0.13 - SDK 10.5 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
RL Secure Plug-In Layer: Version: (null) - SDK 10.5 Support
MagellanPlugIn: Version: 1.2 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Safari Extensions:
Conduit Search for Safari: Version: 1.0
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6 Support
UploadManager: Version: (null) - SDK 10.5 Support
Google Earth Web Plug-in: Version: 7.1 Support
ContentManager: Version: (null) - SDK 10.5 Support
RocketEngine: Version: (null) - SDK 10.5 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Java Support
Line6AudioMIDI Support
Mbox Pro Support
YAMAHA-USBMIDIPatch Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 875.71 GB
Destinations:
TIME MACHINE [Local] (Last used)
Total size: 1
Total number of backups: 3
Oldest backup: 2013-10-21 19:02:42 +0000
Last backup: 2014-03-19 11:19:09 +0000
Size of backup disk: Too small
Backup size 1 < (Disk used 875.71 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      2% SGProtocolService
      1% DashboardClient
      1% WindowServer
      1% fontd
      0% Safari
Top Processes by Memory:
999 MB com.apple.SpeechRecognitionCore.speechrecognitiond
459 MB DaisyDisk
360 MB mds_stores
180 MB Safari
164 MB Mail
Virtual Memory Information:
8.79 GB Free RAM
4.12 GB Active RAM
1.46 GB Inactive RAM
1.62 GB Wired RAM
1.76 GB Page-ins
9 MB Page-outs
Like Show 0 Likes(0)

Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
Your or anyones HELP! is greatly appreciated!

IPod Apps no longer work, Music disappears, Fix?

QUESTION : How to fix permanently the “iPod Touch Breakdown“?
(seems identical to the iPhone “Breakdown“)
Since I upgraded to 2.0.2, running iTunes 7.7.1 (11) on a MacBook Pro G4, I keep having big trouble with Apps, Music and Films.
Here is what I call the “iPod Touch Breakdown“:
- Apps won’t start : the iPod would go back to the home screen after a few seconds.
- Music and Films disappear (My music consists essentially of personnal CDs).
- (for me Photos are still there)
- all original Apple Apps work OK
This is a known problem, also occuring on the iPhone with many posts on the iPhone discussions forum (see “iPhone“/“Installing and Using iPhone Applications“/“iPhone Applications no longer work“. At the time I write this messge, this question has been viewed 16,080 times ( ) (*) and there have been 319 replies: probably a sad record for a single question, which means that THERE REALLY IS A BASIC PROBLEM.
My iPod is a 8Gb purchased while staying in Pasadena, almost a year ago. I was extremely happy to use it more and more like a PDA (updates 2.0.1 and 2.0.2).
There have been some fixes proposed on the discussions forum (iPhone) that I tried and I have tried myself a couple more. NONE of them could fix the problem permanently: all fixes have been working for a day or two, no more. Untill you download an App (even an update) and you get the “Breakdown“ again.
As other users, I have noted a slowdown in anything I am doing (e.g. typing text) just before the Apps stop working and the music disappears. (see for instance Truth42 on iPhone Forum (Applications no longer work), Posted: Aug 25, 2008 10:57 AM)
Fixes: typically you get to disinstall and then reinstall all your Apps. Each time, you lose all your Apps parameters (bad for data bases and notes).
Two ways:
see iPhone forum: Aveonz Posted: Aug 24, 2008 3:16 AM :
1- sync using iTunes
2- in iTunes/Store: deauthorize your account
3- sync
4- authorize
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
(the whole process may take several hours; I have also done a reboot between 3 and 4)
(ii) proposed by various people :
1- deselect all applications
2- sync
3- disconnect your iPod and reboot it (pressing both buttons simultaneously for several seconds – see Apple site) (you keep you parameters, WiFi, etc)
4- select the Apps you want back
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
In the end you can use the Apps you have reloaded, but just for a few days (or hours)… until you cannot resist downloading a new App, or simply just download an App update. It won’t breakdown instantly after you do that, but it will very soon.
I certainly would take any procedure to fix this definitely. However, the best choice is probably to use as few third party Apps as possible (none is better) and wait for 2.1. Hopefully Apple is working on this, and we’ll get a definite fix very soon. This actually makes a very bad press for the iPod Touch and iPhone.
Sadly,
because I think iPod Touch and iPhone are beautiful machines –but for how long? Competition is tough…
Cheers
(*) about this number 16,080, obviously not all of the viewers experienced the “Breakdown“, but most were just curious to know. Still, the good question is to know how many of us, using the iPhone and iPod Touch experience this bug (virus?) and why some have it and not others (and in which proportion?).

Same issue here since updating to 2.0.2; Is there a way to back I wonder?
So I plugged back in my iPod touch and,...
0. make a note of all your music, movies, photos, apps selections to restore
1. cancel connect attempt to iTunes store (little 'x' in iTunes toolbar)
2. cancel attempts to sync or backup (little 'x' in iTunes toolbar)
3. clicked <OPTION>[Restore] once selecting my iPod touch device
4. navigate to <home>/Library/iTunes/iPod Software Udpates/
5. pick the prior update: iPod1,12.0.1_5B108Restore
6. then waited through iPod window status displays
'Preparing iPod software for restore...'
'Restoring iPod software...'
'Verifying iPod Software...'
7. OK the 'Your iPod has been restored to factory settings,...'
8. Ssync process did NOT automatically being so I unplugged & plugged it
(I did verify that 2.0.1 was loaded seeing the App Store)
9. Pick 'Set up as a new iPod'; don't pick an earlier backup point
(mostly 'cause I couldn't be sure which was a good failsafe).
10. iTunes then begin setup of my [ahem] new iPod.
STOP IT; it'll try and do restore everything. Then navigate the tabs for
your iPod and re-select those things you want (music,photos,movies,apps,etc)
So like any computer you need to keep proper backups.
The apple s/w system updater appears to do just that automatically, thanks! Of course it would've been nice to have had the 2.0.2 version tested a bit more before its release.
IMHO the host (mac) should have kept my prefs for the iPod rather than my resorting to handwritten notes but at least I'm back to normal. Consider when replacing an iPod how you'd want the replacement to be a mirror of its predecessor.
Oh, skip future requests to update to 2.0.2 until Apple can get his sorted out.
HTH
/los "I was a teenage net-random"

TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

Itunes no longer works on ipad on version 6 software

My I tunes 10.6.1 no longer works with my upgraded software ipad 2 on version 6 stating my mac needs a higher operating system (currently on 10.5.8) to then upgrade I tunes 10.7. I can no longer use my ipad with itunes simply because I have an older mac operating system. An upgrade on the mac operating system is a lot of money . There is no roll back of ipad software from 6 to the original to cure this

The upgrade to the Mac is around $30.00 if it is still available. You need to upgrade to Snow Leopard 10.6.8 - I think that's the latest SL version.
I copied this from another discussion.
Apple said that customers can still purchase a copy of Snow Leopard or Lion from its online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).
Here is the discussion.
https://discussions.apple.com/thread/4140356?start=15&tstart=0

SSH / ARD no longer working on 10.6 Server

Similar Messages

Maybe you are looking for