Ssh: /etc/issue display between login and password prompts

Hi All,
I currently have ssh installed on one a Solaris 10 (non-global) zone. I have configured the sshd_config to run on protocol 2 and unhashed the 'Banner /etc/issue' parameter.
When I attempt to log into this zone via ssh I get (in this order)...
1. A login prompt
2. The message I have put in /etc/issue
3. A password prompt.
Is there some further configuration I need to consider here?
Any help would be great.
Thanks.

Sorry, it's probably worth mentioning that what i would ultimately like to do is have the message in /etc/issue display itself prior to asking for a login, not after as it currently is.
Thanks.

Similar Messages

Printer is asking for an user acces code instead of windows login and password?

I have been seeing the HP printers asking(LaserJet M4555 MFP, LaserJet 500 color MFP M575 etc) for user access code instead of windows login and password.
One thing i have noticed is that when this happens there is a slight change in the EWS page configuration at security -> access control.The device administrator tabe is unchecked as you can see below ehen this happens
Have tried cold resetting the printer and restore facory settings but this does not works and some thimes it does works for a while but the issue is returing back.
We do not need this access code promt instead we need the usual windows login and password that used be there originally.
alsothis is how the settings look like after a cold reset somtimes when it does not asks for user access code , the problem is cold rese does lways works and it reverts back ois original settings

@munish259272
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

How to hide login and password transported in interface ?

Hi !
        In the current project that I´m working, the customer is developing a website in .Net and intend to use XI to communication between website and ECC 6.0. One of their needs is to create an interface to call a RFC in ECC 6.0 to validate login+password provided in the website(they created a Z table to persist login data, and a RFC to receive login and password and check in this table).
        My problem is, to solve this situation, I would use a simple sincronous interface but, the login+password information will be logged into monitoring screens of XI, and it´s not desireble, so I´m finding a way to hide this information.
        Initially, I was thinking to make 2 adapter modules, 1 to be used joined to the Sender SOAP Channel that will be used to the website call, that could get the data send by the website and encrypt it, to be sent to the XI pipeline encripted(only the fields login and password), and the 2nd to be used joined to the RFC Receiver channel, to decrypt login and password to be sent to the RFC call. Another alternative that I found was to use the MessageTransformBean and XLST mapping + java, but I´m looking for another alternatives.
        Somebody knows if there are some way to achieve this(hide some information in a message being processed by XI)?
        In time, I can´t to disable the logging of syncronous interfaces, because it´s customer requirement.
        Any help is welcome !
        Thank you in advance, and best regards,
        Wilson

Hi !
        I have solved the problem.
        I used to develop 2 adapter modules, one to intercept the message arriving to SOAP Sender communication channel, encrypt the content of parametrized fields(in the module tab of the comm. channel) and deliver the updated message to the processing chain of the comm. channel.
        This message is so processed correctly by the XI pipeline, and delivered to the RFC Receiver Comm. Channel. I developed another adapter module to receive the data sent to the receiver RFC Comm. Channel, decrypt the contents of parametrized fields(like the another module, parametrized in the module tab), and deliver the updated message to the processing chain of the comm. channel.
        After some tests, I verified that the message doesn´t remain logged unencrypted into XI(I checked Message Monitoring for Adapter Engine at Runtime Workbench, and the SXI_MONITOR trn).
        Like mentioned by Jaishankar, the SOAP Adapter initially didn´t accepted the module adapter that I wrote following the stardards existing in several documents about adapter modules here in SDN, but after some research, and debbuging sections of the adapter module, I achieved to develop the correct code to work.
        Thank you for your attention, and best regards,
        Wilson

FTP login and password are not saved on some sites

On some of my sites the FTP login and password are not saved
(even though the "saved" box is checked). Dreamweaver 8.0 on XP
SP2. I can export the site information and then import the same
file exported and there still will be no login or password placed
in the login or password window. I opened the exported .ste files
in notepad and found the login correct and the password incorrect.
I uninstalled Dreamveaver and reinstalled still same
problem.

Ok, I just spent about 3 hours on this. Here's the latest
that I've found. I had looked at the knowledgebase and my registry
matched what was suggested. As this has been an ongoing issue for
me, I thought it was still an issue. Apparently 8.02 did have some
improvements.
I can only guess that many of the 36 sites I have in the Site
Manager lost info before the .02 update.. or I hope so.
I did however discover that there is still what could be
considered a minor bug. I went in to Manage Sites and selected edit
for all of my sites, fixing the ones that had lost their user/pass
info. I'm not positive, but I think only the last edited site kept
it's data.
I discovered after many checks on all the sites, over and
over and over, that it appears that they are now holding the data,
but, if I add the user/pass, I must not only click the OK button to
close that particular site, but I must also click the 'Done' button
before only that one will be saved.
So, I thought I was fixing logins when in fact I was only
fixing one at a time.. Completely closing 'Manage Site' seemed to
hold one new set of login data each time. Seems that it shouldn't
be this way.
But I must say, I am rejoicing at the moment, as I actually
have all my sites set up with FTP info and I am now looking forward
to hopefully adding more and maybe they'll actually be available
for the next editing session.

Creating a login and password in the forms

I have been trying to create a username and password to access the database that I have created using Form Builder. This is the code that I have created....the syntax is correct but its not performing the task i.e direct the user to a different form
DECLARE
LOGINNAME VARCHAR2(20);
PASWORD VARCHAR2(20);
BEGIN
IF LOGINNAME = 'CSR' AND PASWORD = 'CURRIE'
THEN
CALL_FORM ('C:\ClothingCloseout\Menu.fmx');
ELSIF
LOGINNAME = 'MGMT' AND PASWORD = 'SANDRA'
THEN
CALL_FORM ('C:\ClothingCloseout\Menu.fmx');
END IF;
END;
I also tried using the same login and password through which I get connected to teh database but that does not work either....Thanks for the help!!!

Hi Ashley,
The compilation is successful because there are no syntax errors. When the code is executed depends on where you have put this code (On-Logon trigger, etc).
In this situation, it looks like the 'code' has not been executed YET because the event has not been triggered OR it has successfully gone through ie - the IF test for loginname and pasword was not satisfied. Therefore, the call_form was never performed. (Your code does not prompt the user to input 'Loginname' and 'Pasword'). In this case, loginname and pasword are NULLs.
Regards,
John

Lost administrator login and password.

We can't download new software etc. because we lost our administrator login and password. How do we reset it? Will we lose all of our files?

Insert the install disk that came with your MacBook. Reboot holding the C Key down. Once it boots from the install disk continue until you get to a window the has the menu bar across the top. Look under Utilities and find the *Reset Password* item. Change it and you should be able to log in again once you reboot your system.

Send Email for manager of the user with Login and Password the user.

Hello everyone,
I need to send an email to the manager of the user with login and password when it is created in AD.
I already have a mail server configured in the IT Resource. It has some component of the IDM that solve this issue?
Anyone you help me with the next steps?
Thank you.

Thank you for your attention.
It did not work, I did another test to send email notifying you when the User change password.
The following error message appears in oim_server1-diagnostic.log:
[2011-08-08T19:21:30.865-03:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Resetting password
[2011-08-08T19:21:30.936-03:00] [oim_server1] [NOTIFICATION] [IAM-0080013] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Kernel executing default validation with process id, event id, entity and operation 59,612.0.User.RESET_PASSWORD
[2011-08-08T19:21:31.155-03:00] [oim_server1] [NOTIFICATION] [IAM-3050013] [oracle.iam.identity.usermgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Searching for users with the specified criteria.
[2011-08-08T19:21:32.018-03:00] [oim_server1] [WARNING] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Sending Reset Password Notification is not successful
[2011-08-08T19:21:32.639-03:00] [oim_server1] [NOTIFICATION] [IAM-0080046] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Completed orchestration with action result - oracle.iam.platform.kernel.vo.EventResult@4fe0d018
[2011-08-08T19:21:32.642-03:00] [oim_server1] [NOTIFICATION] [IAM-0080011] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Orchestration process with id 59,612 started running in a new thread.
Edited by: Piza on 08/08/2011 15:24
Edited by: Piza on 08/08/2011 15:26

Console login and password

after installing my new solaris 10 x86 platform, the system asks for a console login and password when I have not set any.thus it makes it difficult to boot

Hello Michael,
the username is root and the password is the one you assigned during installation.
If you can't remember what you assigned, boot from cdrom into single-user mode, mount the / slice and clear the password entry in /etc/shadow.
Maybe you assigned no password at all. Just press enter.
To use SMC (Sun Management Console) a password is required ! Assign a new one with the passwd command.
Michael

How do I find settings for remembered login and passwords?

When I attempt to login to websites I am thrown into a loop which fills login and password, then puts the same information into other required dialogue boxes. I want to delete the login from the remembered list.

Hi,
This will vary depending on the browser you're using - for example to stop this behaviour in Internet Explorer 9, see the following.
Open windows Control Panel, open Internet Options, select the Content tab and under the sub-heading 'AutoComplete', click the Settings button.
To delete the current saved passwords etc, click 'Delete AutoComplete history...' and in the following window make sure both the boxes next to Passwords and Form data are ticked, then click Delete button.
To stop the behaviour entirely, remove the tick from the box next to 'User names and passwords on forms', then click Ok. Click Apply and Ok in the previous window.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Why does my iMac now ask for my login and password when trying to drag anything to the trash?

Hello,
I have the new iMac and am now having issues trying to delete anything off my desktop. It is telling me that Finder wants to make changes when I try to drag anything to the trash. I have to constantly resubmit my login and password and then the item just disappears, does not remain in the trash to be emptied later.
I am not sure what happened because it never acted like this. All of my software updates are current and I don't get why my Trash is no longer working as it used to.
Any advice?
Thanks!

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Somehow firefox now opens with my windows mail. Each time I enter my password it asks if I want to save it so I don't have to retype my login and password each time. I hit yes and when I leave firefox it doesn't keep my password. I would like to either

I recently went to open my windows live mail,which normally opens because it has my login and password saved. Now it opens in firefox and I have to retype my login and password everytime I open my mail. I would like when I open my mail not to have to retype my login and password as this is why I have it set up in the original windows mail anyway. So I have attempted to live with this problem by adjusting the options to save my password and when I close out of firefox and try to reopen it later in the day I have to retype my login and password again.
== This happened ==
Every time Firefox opened
== about a month ago

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and Preferences are not saved

Do i need a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

after having my mbp upgraded with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
The user name and password on your computer has nothing to do with your Apple ID.
Good luck,
Clinton

When I logon to iTunes on my iPad it takes my login and password but the apps I'm trying to download don't install?

When I log on to iTunes on my iPad to install apps iTunes accepts my login and password but doesn't download the apps. How do I fix?

Were thse apps you're downloaidng fresh or updating them?

Saving login and password of the server in MD5-Challenge

I want to authenticate the server automatically using MD5-Challenge with Cisco Secure ACS4.1.
When I unplugged and plugged the network cable, it always prompt for login and password.
How can I avoid this process?
What can I do if I want to have authentication automatically at the start-up of my server.
Note: All the fonctionnality of the ACS server is OK

This is a function of the server. How this will work, if at all, depends on which type of server you have.
Which server, which network device and what scenario are you using with MD5?

No CD, can't change admin login and password???

Hi...Please help. I do not have a startup disk and cannot change the aministrator login and password...what do I do?

Hi skyjac, and a warm welcome to the forums!
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... though I was just thinking, this new User probably shouldn't be the same name as an existing one.
If that doesn't work for you (and some users have reported it has not worked for them), try Niel's procedure Making the Setup Assistant reappear.
http://discussions.apple.com/thread.jspa?messageID=607547
I lost my admin user (Mac OS X 10.4 and earlier) ...
http://discussions.apple.com/thread.jspa?threadID=121786&tstart=0

Ssh: /etc/issue display between login and password prompts

Similar Messages

Maybe you are looking for