Ssh not working after recent security updates

ssh worked fine just 2 weeks ago.
in these last 2 weeks i did several updates, i am not sure which caused the problem.
Symptoms:
when i ssh to another machine and i get a "Segmentation Fault" error; when i scp the error message is "lost connection"
This issue was talked about as re-occurring regularly as
discussed on http://discussions.apple.com/message.jspa?messageID=4532389#4532389
But the remedies or fixes suggested there did not change those errors.
On some other site, it was suggested to use 'ssh -1 '
which actually worked but i could not open X11 xterm window,
which usually worked with 'ssh -X' or recently 'ssh -Y' worked instead.
Question:
Hopefully, the security fixes should give back the basic
UNIX X11 functionality. The question is when ?
(I am curious how many people are experiencing the same problems, as this seems quite a serious problem...)
Victor
MacBook Pro   Mac OS X (10.4.9)   2.33 GHz Intel Core 2 Duo

I Just tired my mom's WHITE iphone four bought at the same time as mine (mines black) it is fully updated to IOS7 and it worked! I dont know what it is, but it must be a defect with the black one. I wish apple had an aswer for this one... Mine still doesnt work.

Similar Messages

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Flash player not working after recent software update

    I have a MAC OSX 10.5.8, after the recent software update my flash player no longer works.
    I have read that there is a problem with security for the version of flash that I was using and this is the reason it was disabled. However, I have tried to download the most recent version from the Adobe website, but nothing happens and a message says I already have flash installed on my computer.
    I have a version of flash in my HD>>Library>>Internet plug-ins, and there is also one in HD>>Library>>Internet plug-ins (Disabled) which I have tried to move but it only lets you copy it and it seems unable to be moved back to HD>>Library>>Plug-ins
    I have also tried to download the "No Script" addon for Firefox so that I can at least have flash working in Firefox, but that doesn't seem to be downloading either.
    Please could somebody help me. I cannot now watch videos, listen to my favourite radio stations or even upload pics to ebay to create ebay listings. This problem ruining my internet enjoyment and I just hope that it can be fixed again. How dare Apple just do this without any warning or giving any info on how to easily fix this problem once flash has been disabled.
    I am not a techie so maybe there is an easy fix, but I have spent hours trying a lot of different things but nothing seems to be working.

    Please, nobody waste any time replying to this issue as the problem appears to be fixed now. I rarely restart my laptop as I usually just put it to sleep, however, I restarted it and the problem looks to have gone away. I may have fixed it with some of the things I tried, but the laptop may just have needed restarting - I'm not sure.
    But as long as the problem is resolved, I'm happy. :-)))
    Thanks anyway!

  • Web Sharing not working after installing security update

    I have been using Web Sharing without problems for several months, but now, after installing the latest security update, my browser cannot find my server at macbook.local.
    The console error messages read:
    10/15/08 11:35:17
    AM org.apache.httpd644
    httpd: Syntax error on line 455 of /private/etc/apache2/httpd.conf: Syntax error on line 15 of /private/etc/apache2/extra/httpd-userdir.conf: Syntax error on line 8 of /private/etc/apache2/users/+entropy-php.conf: Cannot load /usr/local/php5/libphp5.so into server: dlopen(/usr/local/php5/libphp5.so, 10): no suitable image found. Did find:\n\t/usr/local/php5/libphp5.so: no matching architecture in universal wrapper
    10/15/08 11:35:17 AM
    com.apple.launchd[1]
    (org.apache.httpd644) Exited with exit code: 1
    I have read a number of other posts (and searched a bit on Google), but nothing I found seems to address this particular console error message.
    What should I do?

    This page fixed the problem. For me this is the part that I had to run:
    Problem 2: Apache is 64 bit, entropy is 32 bit.
    The only solution to this that I've seen is to force Apache to be 32 bit. For intel based machines:
    Code:
    sudo cp /usr/sbin/httpd /usr/sbin/httpd-fat
    sudo lipo /usr/sbin/httpd -thin i386 -output /usr/sbin/httpd
    that will strip everything except the 32 bit intel code from httpd (after making a backup), forcing it to be 32 bit. For PPC, the command will be similar.
    This fix is a bit tacky, but shouldn't cause any problems.
    After running this everything worked as normal. Thanks to everyone that helped.

  • Login Keychain not working after recent Leopard update

    Hi, I've been out of town for the last few weeks and upon returning, I pulled down the most recent updates. Since then, I'm being prompted to enter my keychain password every time I need to access an application. The issue is that when I type my password in, the system is telling me that the password is inaccurate and I am 100% certain that I am typing the correct password in. I ran the Keychain Access "Verify" and then "Repair" and I get the following result. What should I do next?
    Repair started
    Checking keychain configuration for Administrator (user ID=501)
    Home directory is /Users/admin
    Checked login keychain
    Checked password for ~/Library/Keychains/login.keychain
    Password for ~/Library/Keychains/login.keychain is not the same as login password, so keychain can't be unlocked automatically
    Login password could not be synchronized with keychain ~/Library/Keychains/login.keychain (-128)
    Unable to read settings for ~/Library/Keychains/login.keychain
    Checked default keychain
    Checked keychain search list
    Checked contents of ~/Library/Keychains/login.keychain
    Checked contents of ~/Library/Keychains/admin.keychain
    Warning: some problems were not fixed
    Repair failed
    Thanks in advance!

    After using Leopard for awhile, I think the "Login" keychain, is the same as your login password, and Leopard asks you over and over again for your "Login" keychain password and I kept putting in my keychain password which was wrong, I finally put in my standard login and it accepted that password. I have no idea why, but I am glad someone else had the same problem....I thought Leopard only hated me!

  • Space Bar hot key not working after recent Indesign update

    Hi all
    I just did the most recent update (3-31-14) and now the space bar hot key isn't working, nor is the hot key for duplication (option). So, uh, anyone else notice this, and if so, Adobe, you gonna fix this in the update? These two functions missing are messing with my work flow.
    Thanks

    Try restoring your InDesign preferences. Here's how:
    Trash, Replace, Reset, or Restore the application Preferences
    You're assuming that it's an InDesign bug that you lost your shortcuts. That is almost always a local computer glitch. None of the rest of us have that problem, we would be flooded with reports if that is true.

  • Fn key not working after recent keyboard update

    Exactly what it says in the title. My fn key no longer works, I've checked the keyboard preferences and nothing seems out of the ordinary; anyone else having this problem? Any fixes?

    Try restoring your InDesign preferences. Here's how:
    Trash, Replace, Reset, or Restore the application Preferences
    You're assuming that it's an InDesign bug that you lost your shortcuts. That is almost always a local computer glitch. None of the rest of us have that problem, we would be flooded with reports if that is true.

  • Sound not working after installing security update

    I went into the Audio panel in System Preferences, but it says there is no output device.

    Reset the PRAM. It contains files relating to audio out.
    http://support.apple.com/kb/HT1379?viewlocale=en_US

  • Coldfusion 64 bit windows installer stops working after recent microsoft update

    Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
    My question is at the end.
    Trying to deploy coldfusion 9 enterprise 64 bit trial  version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
    Steps taken (remember, this is all 64 bit):
    1. Installed the base OS which was slipstreamed with SP2.
    2. Checked w/ microsoft and installed 63 OS updates.
    3. Launch the CF9 trial exe.
    4. As soon as the first screen finishes (the one that looks like  it is extracting files) then the second screen pops up (the one that  simply says CF Adobe Coldfusion 9) and the progress bar quickly moves  95% to the right and the install application quits. No error, no nothing. No log file either.
    5. After a moment of incredulous silence (and retrying/rebooting,  etc), I started to google it. I found nothing. However, I did find a  post (thanks dspent!) that was helpful in that it told how he was able  to get at a log file of sorts, by pre-extracting the  coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand.  (Dspent's install snafu was different than mine, but his post was very  valuable and got me started in the right direction.)
    6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
    7. From the windows directory created by step 6, I launched adobe_cf.exe.
    8. Same thing (the install application quits. No error, no nothing. No log file either.).
    9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
    10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
    11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
    12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
    13. Bingo! That install works.
    14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
    15. Back on the first server (the one with the MS security  patches installed and the one that CF won't install on). In the CF file  adobe_cf.lax (one of the files extracted in step 6) there is a line that  mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
    16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
    17. Modify a line in adobe_cf.lax :
       before
         lax.nl.current.vm=resource\\jre\\bin\\java.exe
       after
         lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
    (that assumes that you let step 16 install to the default location)
    Save the file.
    18. Run the install ... ** IT WORKS ** !
    Obviously, the built in java provided with the CF installer is  no longer compatible with some change introduced by some recent MS  update on the W2K3 64b SP2 platform.
    And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the  version of java.exe that is in that directory is the original version,  not the newer version I forced the installer to use).
    On the surface, CF seems to run OK, but I have not done any application testing yet.
    And finally my
    ** QUESTION **
    Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same  (close though) so I certainly don't want to break things by doing this,  but instinct tells me that if the installer broke using the older  version, then something else is gonna break down the road if I don't use  the new version. On the other hand, the differences in the  directories and files is enough that it makes me very nervous, with my  limitied java skill set, to make this decision. 
    Thanks in advance!!
    Byron

    Hi Byron,
    Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
    So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
    Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
    Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
    Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
    #java.home=C:/ColdFusion9/runtime/jre
    Add new line like so and save jvm.config:
    java.home=C:/Program Files/Java/jdk1.6.0_24/jre
    Note  there the slashes and the location of the JRE (runtime) - you need to  point to the one in JDK because the other JRE in C:\Program  Files\Java\jre6 will be missing a DLL.
    Start CF via SERVICES.msc.
    HTH, Carl.

  • My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app
    - Restore from backup
    - Restore to factory daults/new iPod.

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • Airtunes quit working after latest security update

    My airtunes quit working after latest security update. Anyone else experience this problem?
    In search of the fix, any help welcome.

    Had to reset the Airport Express.

  • My imessage is not Working after recent update

    My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

    It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

Maybe you are looking for