Ssh takes me to the global zone instead of the non-global zone

I have set up my first Solaris 10 server with a new zone. The ce device is set up on the zone as well as the global zone.
Output from ifconfig on the global zone:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.16.1.217 netmask ffffff00 broadcast 172.16.1.255
ether 0:3:ba:f2:a1:54
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 172.16.1.199 netmask ffffff00 broadcast 172.16.1.255
ether 0:3:ba:f2:a1:54
Output from the non-global zone:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.16.1.199 netmask ffff0000 broadcast 172.16.255.255
ether 0:3:ba:f2:a1:54
When I ssh into the non-global zone, I end up in the global zone? Can I ssh straight into the non-global zone? Am I missing something in the zone setup that keeps me from being able to ssh into the non-global zone?
Any help is appreciated. I have been racking my brain on this for several hours.
Thanks ahead of time.

TAdriver wrote:
The one thing I have found in the documentation is that if you set the network as an exclusive IP, you can only assign the physical name using zonecfg. You can't set the IP address or the default router. In fact, if you try to set either of those, you get an error saying you can't set those using an exclusive IP type.Correct. When doing a shared-IP zone, the zone has no privileges to do IP-level things. So the global zone (via the zone configuration) creates the virtual interface and sets the IP address. Then when the zone is booted, the interface is given to it.
With an exclusive-IP zone, the zone can do all this work itself. From its perspective, it's handed an interface like a regular machine. So the IP settings are done within the zone (/etc/hosts, /etc/hostname.XXX, /etc/netmasks).
Darren

Similar Messages

TS3623 purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

What's wrong with the built-in keyboard on my macbook? The caps button does not work rite, no matter what letter button i push they all come out capitals and the number keys when pushed display the special characters instead of the numbers!

the built-in keyboard on my macbook is not functioning right, the number keys when pushed display the special characters instead of the numbers,
the caps button doesn't work at all, the letter buttons display capitals when pushed whether the caps button is on or off, the shift keys are also out of whack!!
It seems it somehow got relocated to the "0" button because if you push and hold the zero button down the keyboard seems to operate normally, the number keys display numbers when pushed the letter keys display lower case when pushed but release the zero button and your back in the twilight zone!! Can anybody help me resolve this issue? one more thing im using an external usb keyboard right now and it seems to function properly if that helps any.

You would do better in the actual macbook pro forums (this is not).

Is it possible to patch Global Zone and only specific Non-Global Zones?

Hi Champs,
Is it possible to patch Global Zone and only specific Non-Global Zones? Idea is to patch DEV-zones only on the system & test applications and then patch only the STG-zones on same server!
Not sure if it is possible but just throwing a question...
Cheers,
Nitin

M10vir wrote:
Yes, if you have branded (non-sparse) zone!Branded zones and sparse zones don't have the relation that you imply. In Solaris 10, native zones can be sparse or whole-root (non-sparse, as you say). Zones that are not native zones are branded zones. Branded zones on Solaris 10 include Solaris Legacy Containers, previously known as Solaris 8 Containers and Solaris 9 Containers. That add-on product allows you to run Solaris 8 and Solaris 9 application environments under a thin layer of virtualization provided by the brands framework. solaris8 and solaris9 branded zones can be patched independently of each other and of the global zone.
Solaris 11 has no "native zones" - all zones use the brands framework. The "solaris" brand does no emulation and in that respect is very similar to native zones on Solaris 10. Solaris 11 also provides Solaris 10 Zones via the solaris10 brand. This allows zones or the global zone from a Solaris 10 system to be transferred to a Solaris 11 system and run as solaris10 zones. When running on Solaris 11, solaris10 zones can each be patched independently from each other and the Solaris 11 global zone. Technically, Solaris 11 doesn't have patches - it just has newer versions of packages to which the system is updated.

Wenn I've made changes on my private home-page and want to see the result, how do I get my Mac to load the new side instead of the "old" one?

When I've worked on my private home-page and want to controll the results, how do I get my Mac to take the new version instead of the old one? I tried cmd R without any change! Who knows? Nina

Try clearing the cache - command-option-e in Safari.

How can I choose the built-in mic of the Macbook Pro instead of the headphones' mic?

I have some headphones with a built-in microphone connected to the Macbook Pro, but I would like to use the microphone of the Macbook Pro instead of the headphones' one. If I go to System Preferences > Sound > Input, I can choose between 'External microphone' and 'Line in', but none of them take the sound from the Macbook Pro's microphone.

Go to System Preferences on that click sound icon select input chose which mic you want

Send email to the Form Submitter instead of the process creator

Hi,
Can any one please show me how to make a process to send an email notification to the Form Submitter instead of the Process Creator.
Here is my brief desc on my process: Form Filler (can be anyone) send the filled form for a list of employees to the one who request (the 1st employee name on the list of the form) then this he/she then submit the form (form submitter) to process to route it to the manager. Whether the mgr is approved or denied then the process is completed by sending to his/her for status of that request. I was able to have it to send the email to the process creator (creator_id) but not the Form Sumitter. Can any one please help.
Thanks,
Han Dao

Hi Han
I guess I should have double checked the version with you first!
If I remember correctly, in 8.2.1 there are a few more steps involved.
On the Assign Task service...Form Data Mapping tab, is a field called "Completed user id".
This is:
The location to store the GUID (Global Unique Identifier) representing the user who completed the task. The data type is string.
You need to create a string variable to hold that value.
You select that in the "Completed user id" field.
Because this is a GUID, you will then have to do a User Lookup (under Foundation) to find your user.
(http://livedocs.adobe.com/livecycle/8.2/wb_help/wwhelp/wwhimpl/js/html/wwhelp.htm)
You can then use those results in the To field of the SendWithDocument.
Hope this helps.
Diana

TS3899 My incoming emails on my ipad are going into the important box instead of the inbox how do I get them to go into inbox

The incoming mail on my apple ipad are going straight into the important box instead of the inbox how do I resolve this.

Who is your email provider? Is it Gmail? Take a look at this.
https://productforums.google.com/forum/#!topic/gmail/JVnvlvaVt0E

Populating the user group instead of the group ID in MFA

Hello all,
I am trying to Populate the user group instead of the group ID in MFA. I want to use this to create authorization permissions, after authentication. I am running into the problem of not getting any info after authentication in the attribute dump. Are
there settings that I can change in order to Populate the attribute dump? are there settings that I can change to get all of the groups that each user is in?
Thanks,
Levi Williams
IT professonial
Intern

Hi Levi Williams,
Thanks for posting here!
Refer to the solution in this thread link:
https://social.msdn.microsoft.com/Forums/en-US/df060757-8190-4083-a162-0876cd4b8d15/group-based-radius-return-attributes?forum=windowsazureactiveauthentication
Additional reference:
http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/
Hope this helps!
Regards,
Sadiqh

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

There are a number of third party solutions for this. I just use Bridge, so can't recommend one in particular.

HT1657 I rented a movie and was charged for it, it started to download but says I do not have enough space. I tried to delete it so I could download the SD version instead of the HD version but am unable to do that what can I do???

I rented a movie and was charged for it, it started to download but says I do not have enough space. I tried to delete it so I could download the SD version instead of the HD version but am unable to do that what can I do???

Same thing happened to me ipad. Please someone fix it Apple.

First time going to a site where I do not have access and clicking the back button I'm returned to the root site instead of the site I started from

Greetings,
I have SharePoint 2013 enterprise using ADFS for authentication. I have an issue where the first time going to a site where you do not have access and clicking the back button you're returned to the root site instead of the site you
started from.
ie:
1) at site http://www.sharepoint.com/sites/finance/home.aspx
2) browse to
http://www.sharepoint.com/sites/finance/private/home.aspx
3) receive a message: you do not have access to this site ((oops went to the wrong location - I'll hit the back button))
4) click the browser back button
5) get returned to http://www.sharepoint.com/pages/home.aspx
This only happens the first time browsing to a site that I do not have rights to, after this I can browse to the same site and hit the browser back button and return to the correct site, or any other site that I do not have access to.
Any ideas as to why this happens? Ideas of where to start looking?
Thanks

Hi Robert,
From your description, when you receive access denied message and hit back button in browser, it redirects you to the root site but not previous site. However, this just happens at the first time.
You may try to use some tool or check log which can tell us how does it handle the request when you hit the button. And compare the issue time and non-issue time.
I'd suggest you use Netmon tool:
http://blogs.msdn.com/b/carloshm/archive/2012/11/08/sharepoint-2013-network-monitor-parsers.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Application messages are in the system log instead of the application log

Hi SAP GURUS.
The standard output is created from the outbound delivery .
All the messages are hitting the system log instead of the application log .
This is after the upgrade from 4.6c to ECC 6.0 .
Please provide the details how to move the log to the application log since the output is the standard output (SAP provided output type ).

verzunof wrote:
Hello,
My system.log is filled with these messages, they repeat every second.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncTransmit::waitForDMA - context not going inactive.
Do these messages indicate a problem? If so what that could be problem and the solution?
Can this contribute to the sleep/wakeup problem when iMac won't wakeup after being put to sleep manually and not sleeping according to Power Saving settings?
Thanks a lot.
verzunof wrote:
I'm not certain if those messages indicate a power issue but you can try *resetting the System Management Controller* and see if that helps. Here's how: http://support.apple.com/kb/HT1806
"The System Management Controller (SMC) is a chip on the logic board that controls all power functions for your computer. If your computer is experiencing any power issue, resetting the SMC may resolve it. The SMC controls several functions, including:
Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
Handling system resets from various commands.
Controlling the fans."
Carolyn

How do i show the filename.type instead of the entire file path?

How do i show the filename.type instead of the entire file path?
I want it to show "ProgramSetup.exe" instead of "C:/Program Files/Oracle/JavaFX/ProgramSetup.exe"
I have created a JavaFX program with the help of my manager
below are the code
               File file = fileChooser.showOpenDialog(Admin.mainStage);
               if (file != null) {
                    textFiles.setText(file.getAbsolutePath());
                    String absolutePath = file.getAbsolutePath();
                    //String fileName = new File(absolutePath).getName();the reason i put the last line as // because it has error on that line....
if i remove the last line, it will display but with the full path....
i search through google and the guide on many forums aren't clear to me.....some said there are 2 ways but i tried and it is not working, atleast for me...maybe i left out something or what....can anyone help me on this?

You don’t need the absolutePath:
File file = fileChooser.showOpenDialog(Admin.mainStage);
               if (file != null) {
                    textFiles.setText(file.getName());
                           }

Using the file icon instead of the Thumbnail icon

is it possible to use the file icon instead of the thumbnail icon on the desktop? If so, how?
Thanks,
Travis

View menu --> Show view options --> Show Icon preview --> uncheck it

When i link a page to send my email the page comes up in the adress box instead of the subject box

when i right click a page to e-mail the link to the page appears in the address bar instead of the body of the e-mail

Mark,
I understand that you are frustrated with a changed functionality of an email website that you use. There is a feature in Firefox that switches to a tab immediately in the "3bar" menu > Options under Tabs, please make sure that nothing has changed.
Please also update to version 32, and post back with your results.

Ssh takes me to the global zone instead of the non-global zone

Similar Messages

Maybe you are looking for