SSH to PIX works but HTTP does not work

Hi
I can SSH to pix but not HTTP to pix although http is enabled.I am using ACS/RSA for user authentication.I see SSH is allowed in ACS but I do not know How to configure ACS so that I can HTTP to pIX ?I am trying to connect to pIX with Cisco Network Assistant ,it will connect but asks for username and password and when I put in username and password it comes back asking the same

The WebUI can not use RSA for authentication. As a test try setting it to local.

Similar Messages

Weirdness: http works but https does not

I have a very weird problem which no-one has been able to fix.
I have an Airport Extreme card and a third-party DSL modem / wireless router combo. Most internet activities are fine (ftp, email, http) but whenever I try to access a secure site (https) or run a VPN connection (Apani Netlock) one of three things happen:
1. I spontaneously disassociate from my WiFi base station, losing the wireless connection. If I cancel the https request or close down the VPN, the wireless link comes back after 5-10 seconds.
2. I get TCP/IP timeouts - no responses from server.
3. It works, but extremely slowly. Loading a single https web page can take anywhere between 30 seconds to 3 minutes. I'm on a 1.5 Mb/s DSL link.
Things I have tried:
1. Connecting by ethernet directly to the router instead of using 802.11b/g - all the problems go away. So it is not a DSL modem or ISP issue.
2. Changing the MTU of the Airport Extreme card (en1). I have tried values from 600 to 1492. Same problems exist - makes no difference.
3. Tried an Apple Airport base station connected by ethernet to the modem instead of using the modem's wireless. Same problems exist, although the VPN doesn't work at all (even slowly) because the ABS does not support that particular VPN protocol.
I'm at my wits end. No one I have spoken to at tech support at the ISP or modem manufacturer have ever heard of such a problem.
HELP!

Ok, it's some years later. and the problem has gone away. Things which may have fixed it: OS software upgrades, client software upgrades, better signal strength (this problem did seem more prevalent at low WiFi signal strengths).

TS3367 facetime used to work but now does not work on any of my devices

I have been in regular contact until about 4 days ago using facetime on my iphone 5 imac 10.7.5. ipad 2 now none of these devices work from incoming calls from Philipinnes. Take note the caller had latest macbook pro 13 inch and is able to call Guam on fatetime with success. What is happening why is incoming calls alway failing. This has been 4 days running and is not good enough. Okay I havent got the latest updates but why in the late few days whould this effect anything. I mean 3 devices and none of them work. This is most frustrating and annoying. I have intead used skype which does work but at night time the camera is not as clear. Tanke note also earlier in the year I received calls from Vietnam and although I did have dropouts was always able to connect only these last four days have had no success. Also I have not been able to call out. The wireless has full bar and am near the modem that is not an issue. Unless there has been a recent change why is htis not working all of a sudden.

THere seems to be a FaceTime issue and some users who have been in contact with Apple support claim that Apple is working on this.
I have read many posts on the issue and have seen that there are many reporting that when they have updated their various devices to the latest software, the issue has been resolved.
You can wait for Apple to resolve the issue OR you can update everything to the latest software and see if this solves your issues.

How do I fix my volume when ringing it works but it does not work for games and movies

How do I fix my phone volume it works when the phone rings but for all the other things the volume does mot work for example games and other sounds don't work.

Hm, it sould like liquid damage to me.

Microphone works but dictation does not work

My dictation software was working fine then suddnely not so much. I have ensured it has been enabled, I have selected automatic detection as the default, I have choesen the internal microphone as the default, I have chosen the external microphone as the default, I have even deleted the
file://localhost/Users/williams/Library/Preferences/com.apple.assistant.plist file and rebooted, tested my internal and external microphones through the system preferences dictation setup (both register as working while in dictation preferences as indicated by the microphone symbol responding to sound), I've ensured the language was set to english (US) and closed all other programs.
Once the dication command is selected the microphone pops up and viola no response as if the microphone is no longer working!!! I am sooo much more productive with the speech to text function and really need it back. Anyone with any new/additional suggestions will be most welcome and I appreciate the help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

DM - "Export from Fact Table" works but "Export" does not work properly

Hi,
I'm using BPC7M.
I found it strange that Export cannot dump data to a flat file though I'm pretty sure my selection of dimension members contain data. The existing of data was further confirmed by running Export from Fact Table successfully, where I chose the same set of dimension members. Below are the log files.
Export log file FAIL
u603Bu6B65u9AA4 2
1. Dump Data:     Failed in 32 sec.
[u9009u62E9]
FILE=\Shenergy\WJ2\DataManager\DataFiles\WJ2_SunnyTest.txt
TRANSFORMATION=\SHENERGY\WJ2\DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\EXPORT.XLS
MEASURENAME=PERIODIC
(u6210u5458u9009u62E9)
Category:
Time:
WED_Entity:
B_Account:
DataSrc: INPUT
[u6D88u606F]
There is no data in the selected region; select a region that has data._2_True
Export from Fact Table log file   SUCCESS
u603Bu6B65u9AA4 2
1. Dump Data:          completed in 1 sec.
2. Convert Data:       completed in 0 sec.
[u9009u62E9]
FILE=\Shenergy\WJ2\DataManager\DataFiles\\WJ2SunnyTest.txt
TRANSFORMATION=\SHENERGY\WJ2\DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\EXPORT.XLS
(u6210u5458u9009u62E9)
Category:
Time:
WED_Entity:
B_Account:
DataSrc: INPUT
[u6D88u606F]
Record Count: 104
Accept Count: 104
Reject Count: 0
Skip Count   :0
I tried Export in another application and it worked properly. Maybe there is something wrong with the application but I don't know how I can fix this.
Thanks!
Sunny

Hi Sorin,
In order to make sure the sum is not equal to 0, I ran the "Clear" package and full optimize the application. Afterwards, I deliberately sent only 1 record. I ran the "Export from Fact Table" and I have the following contents in my output flat file.
B_ACCOUNT,TIME,WED_ENTITY,DATASRC,CATEGORY,SIGNEDDATA
KPI0001,2009.INP,DEP_INPUT,INPUT,ACTUAL,-500.0000000
This confirms that the sum is not 0. Then, I ran "Export" package. Yet again, I encountered the same error.
There is no data in the selected region; select a region that has data._2_True
Best Regards,
Sunny

Tax % - FB70 works but VF01 does not work????

Hi all
I manually entered a tax jurisdiction into the standard Costing procedure 'TAXUSJ' as CA102000. I went to FTXP & entered my output tax code as O1, picked the state of California's juris. CA1002000 & entered 7.25% in the A/R Sales tax 2 against account key MW2 (I dont know why it suppressed account key MW1). Checked if the GL accounts were defined & they were defined as 216010.
Then I went to FB70 (customer invoice) & I picked that jurisdiction & it calculated the tax perfect. But when I asked the SD consultant to do a sales order, goods issue & delivery & then when he created the accounting document it did not generate any tax entry to that GL account. What could be the possible reason. The GL account for that invoice was 400000 & it has a * for the 'tax type' in the FS00 master data screen. So I dont know what could be the reason.
Again it is a manual entry for the tax jurisdiction. I could see that the jurisdiction on the customer master was picked up as CA1002000.
Can somebody help please...
Thanks for all your time....

Entry for the condition table in VK19 for the satet of California was missing.
Thanks all for your time...

On my admin user indesign works but it does not work on another user

i am using os 10.7.5
and i got my applications installed
they work fine on admin user
but when i create a common user for every1 to use
my applications ask me to re-instal
waiting for reply
mahendra
dubai

Did you put the software in /Applications, or did you choose a different location?

Custom login module Authentication works but Authorization Does not work

Hi:
I am using custom login module and switched on the ADF authentication using adf-config.xml file. My custom authentication works i.e. it returns true but when it finally tries to display the page 401 Unauthorized message is shown. I am using JDev 10.1.3.2.
Is there any other settings I need to perform. Could you please let me know.
Thanks

I have the same issue, please refer to this thread.
Re: ADF Security Authorization

I am attempting to upload multiple photos on a macpro from a cd. I am used to a pc. I tried using the command button to select multiples but it does not work. Please advise

I am attempting to upload multiple photos on a mac pro from a cd. I have tried holding the "command"button down to select multiple photos but it does not work. Please advise. Thanks,John

why not sort by (name, date, etc) and Click on 1st and Shift-Click on last.
Might work better to copy or import to a project folder.
https://discussions.apple.com/community/ilife/iphoto
http://www.apple.com/support/iphoto

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

I purchased an app, but it does not work. Can I cancel it and get my money back?

I purchased an app two days ago but it does not work. Can I cancel it and get my money Back?
I have in ipad2
Thank you

You can always try to contact iTunes Support:
http://apple.com/support/itunes/

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren

en

I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

SSH to PIX works but HTTP does not work

Similar Messages

Maybe you are looking for